DOI QR코드

DOI QR Code

Optimization algorithms for composite beam as smart active control of structures using genetic algorithms

  • Cao, Yan (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Gholizadeh, Morteza (Department of Civil Engineering, Tabriz Branch, Islamic Azad University) ;
  • Fu, Leijie (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Du, Jiang (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Qian, Xueming (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Wang, Zhijie (School of Mechatronic Engineering, Xi'an Technological University) ;
  • Roco-Videla, Angel (Facultad de Ciencias de la Salud., Universidad Bernardo O'Higgins) ;
  • Selmi, Abdellatif (Department of Civil Engineering, College of Engineering, Prince Sattam Bin Abdulaziz University) ;
  • Issakhov, Alibek (Al-Farabi Kazakh National University)
  • 투고 : 2019.01.15
  • 심사 : 2011.05.11
  • 발행 : 2021.06.25

초록

The principles of productive active and semi-active civil and infrastructure engineering structural control date back 40 years and significant progress has been recorded in those four decades. Smart structures typically have some control systems that enable them to deal with perturbations. The active vibration management techniques have been applied numerically and experimentally in order to reduce the vibrational levels of lightweight economic composite structures. Smart composite beams and plates have been produced and tested with surface-based piezoelectric sensors and actuators. It has been found that an effective model of smart composite plates can predict the dynamic characteristics. Utilizing Genetic Algorithm (GA) was designed and implemented. Two regression model as root mean square (RMSE) and determination coefficient (R2) were used. The first and second bending modes are operated effectively by a beam, and simultaneous vibration levels are significantly reduced for the conductive plates by the simultaneous operation of the bending and twisting modes. Vibration management is realized by using efficient control. GA could show better performance for managing linear feedback laws under given assumptions.

키워드

과제정보

This paper is supported by Shaanxi Key Research and Development Plan (Grant: 2020GY-147), Shaanxi Innovation Capability Support Plan (Grant: 2019PT-19), Project of Joint Postgraduate Training Base of Xi'an Technological University, Research Project of Graduate Education and Teaching Reform of Xi'an Technological University in 2017, and President Fund of Xi'an Technological University (Grand: XAGDXJJ15004).

참고문헌

  1. Abedini, M. and Zhang, C. (2020), "Dynamic Performance of concrete columns retrofitted with FRP using segment pressure technique", Compos. Struct., 260, 113473. https://doi.org/10.1016/j.compstruct.2020.113473
  2. Abedini, M. and Zhang, C. (2021), "Dynamic vulnerability assessment and damage prediction of RC columns subjected to severe impulsive loading", Struct. Eng. Mech., Int. J., 77(4), 441-461. https://doi.org/10.12989/sem.2021.77.4.441
  3. Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", In: Structures, Vol. 28, pp. 456-466, Elsevier. https://doi.org/10.1016/j.istruc.2020.08.084
  4. Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. (2018), "Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces", Adv. Struct. Eng., 21(7), 1002-1020. https://doi.org/10.1177/1369433217737115
  5. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034
  6. Alam, Z., Sun, L., Zhang, C., Su, Z. and Samali, B. (2020a), "Experimental and numerical investigation on the complex behaviour of the localised seismic response in a multi-storey plan-asymmetric structure", Struct. Infrastruct. Eng, 17(1), 86-102. https://doi.org/10.1080/15732479.2020.1730914
  7. Alam, Z., Zhang, C. and Samali, B. (2020b), "Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure", Struct. Des. Tall Special Build., 29(12), e1750. https://doi.org/10.1002/tal.1750
  8. Alam, Z., Zhang, C. and Samali, B. (2020c), "The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures", Earthq. Eng. Eng. Vib., 19(1), 223-237. https://doi.org/10.1007/s11803-020-0558-x
  9. Alkhatib, R. and Golnaraghi, M. (2003), "Active structural vibration control: a review", Shock Vib. Digest, 35(5), 367. https://doi.org/10.1177/05831024030355002
  10. Alt, N., Hinterstoisser, S. and Navab, N. (2010), "Rapid selection of reliable templates for visual tracking", Proceedings of 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, San Francisco, CA, USA, June.
  11. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
  12. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. http://dx.doi.org/10.4028/www.scientific.net/AMR.168-170.2329
  13. Arif, M.Z., Ahmed, R., Sadia, U.H., Tultul, M.S.I. and Chakma, R. (2020), "Decision Tree Method Using for Fetal State Classification from Cardiotography Data", J. Adv. Eng. Computat., 4(1), 64-73. http://dx.doi.org/10.25073/jaec.202041.273
  14. Astrom, K.J. and Hagglund, T. (1995), PID controllers: theory, design, and tuning, Instrument society of America Research Triangle Park, NC, USA.
  15. Azamathulla, H.M. and Ghani, A.A. (2010), "Genetic programming to predict river pipeline scour", J. Pipeline Syst. Eng. Practice, 1(3), 127-132. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000060
  16. Babanajad, S.K., Gandomi, A.H., Mohammadzadeh, D. and Alavi, A.H. (2013), "Numerical modeling of concrete strength under multiaxial confinement pressures using linear genetic programming", Automat. Constr., 36, 136-144. https://doi.org/10.1016/j.autcon.2013.08.016
  17. Brandejsky, T. (2018), "Dependency of GPA-ES Algorithm Efficiency on ES Parameters Optimization Strength", Proceedings of International Conference on Advanced Engineering Theory and Applications, Springer. https://doi.org/10.1007/978-3-030-14907-9_29
  18. Chau, K.K., Moslehi, B., Song, G. and Sethi, V. (2004), "Experimental demonstration of fiber Bragg grating strain sensors for structural vibration control", Proceedings of Smart Structures and Materials 2004: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, International Society for Optics and Photonics, San Diego, CA, USA, July. https://doi.org/10.1117/12.539215
  19. Che-Ngoc, H., Pham-Chau, A.-T. and Bora, D.J. (2018), "A New Fuzzy Rule Based Contrast Enhancement Method using The Two-Steps Automatic Clustering Algorithm", J. Adv. Eng. Computat., 2(4), 239-250. http://dx.doi.org/10.25073/jaec.201824.214
  20. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., Int. J., 30(5), 457-000. https://doi.org/10.12989/scs.2019.30.5.457
  21. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585
  22. Dao, T.-P., Huynh, N.-T., Nguyen, T.-H., Vu, H.-N. and Nguyen, H. (2018), "Effect of clearance and friction in revolute imperfect joints on dynamic behaviors of a slider-crank mechanism with two sliders", J. Adv. Eng. Computat., 2(1), 1-8. http://dx.doi.org/10.25073/jaec.201821.73
  23. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141
  24. Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Constr. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008
  25. Fanaie, N. and Moghadam, H.S. (2019), "Experimental study of rigid connection of drilled beam to CFT column with external stiffeners", J. Constr. Steel Res., 153, 209-221. https://doi.org/10.1016/j.jcsr.2018.10.016
  26. Fanaie, N. and Shamlou, S.O. (2015), "Response modification factor of mixed structures", Steel Compos. Struct., Int. J., 19(6), 1449-1466. https://doi.org/10.12989/scs.2015.19.6.1449
  27. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485
  28. Fanaie, N., Faegh, S.S. and Partovi, F. (2019), "An improved and innovative formulation for calculating amplified elastic story drift induced by RBS connections in steel moment frames", J. Constr. Steel Res., 160, 510-527. https://doi.org/10.1016/j.jcsr.2019.06.003
  29. Faradonbeh, R.S., Armaghani, D.J. and Monjezi, M. (2016), "Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique", Bull. Eng. Geol. Environ., 75(3), 993-1006. https://doi.org/10.1007/s10064-016-0872-8
  30. Faradonbeh, R.S., Hasanipanah, M., Amnieh, H.B., Armaghani, D.J. and Monjezi, M. (2018), "Development of GP and GEP models to estimate an environmental issue induced by blasting operation", Environ. Monit. Assess., 190(6), 351. 10.1007/s10661-018-6719-y
  31. Fisco, N. and Adeli, H. (2011), "Smart structures: part II-hybrid control systems and control strategies", Scientia Iranica, 18(3), 285-295. https://doi.org/10.1016/j.scient.2011.05.035
  32. Galyshev, S., Gomzin, A., Gallyamova, R., Khodos, I. and Musin, F. (2019), "On the liquid-phase technology of carbon fiber/aluminum matrix composites", Int. J. Miner. Metall. Mater., 26(12), 1578-1584. https://doi.org/10.1007/s12613-019-1877-7
  33. Guven, A. and Gunal, M. (2008), "Genetic programming approach for prediction of local scour downstream of hydraulic structures", J. Irrig. Drain. Eng., 134(2), 241-249. https://doi.org/10.1061/(ASCE)0733-9437(2008)134:2(241)
  34. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. https://doi.org/10.1177/1464420716642258
  35. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x
  36. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081
  37. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021a), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7
  38. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021b), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y
  39. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681
  40. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324
  41. Kapuria, S. and Yasin, M.Y. (2010), "Active vibration control of piezoelectric laminated beams with electroded actuators and sensors using an efficient finite element involving an electric node", Smart Mater. Struct., 19(4), 045019. https://doi.org/10.1088/0964-1726/19/4/045019
  42. Kasemi, B., Muthalif, A.G., Rashid, M.M. and Fathima, S. (2012), "Fuzzy-PID controller for semi-active vibration control using magnetorheological fluid damper", Procedia Eng., 41, 1221-1227. https://doi.org/10.1016/j.proeng.2012.07.304
  43. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36, 1539-1558. https://doi.org/10.1007/s00366-019-00780-7
  44. Kordestani, H. and Zhang, C. (2020), "Direct use of the savitzky-golay filter to develop an output-only trend line-based damage detection method", Sensors, 20(7), 1983. https://doi.org/10.3390/s20071983
  45. Kordestani, H., Zhang, C. and Shadabfar, M. (2020), "Beam damage detection under a moving load using random decrement technique and Savitzky-Golay Filter", Sensors, 20(1), 243. https://doi.org/10.3390/s20010243
  46. Koza, J.R. (1992), Genetic programming: on the programming of computers by means of natural selection, MIT press.
  47. Kumar, K.R. and Narayanan, S. (2007), "The optimal location of piezoelectric actuators and sensors for vibration control of plates", Smart Mater. Struct., 16(6), 2680. https://doi.org/10.1088/0964-1726/16/6/073
  48. Kumar, K.R. and Narayanan, S. (2008), "Active vibration control of beams with optimal placement of piezoelectric sensor/actuator pairs", Smart Mater. Struct., 17(5), 055008. https://doi.org/10.1088/0964-1726/17/5/055008
  49. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207
  50. Li, C., Sun, L., Xu, Z., Wu, X., Liang, T. and Shi, W. (2020), "Experimental investigation and error analysis of high precision FBG displacement sensor for structural health monitoring", Int. J. Struct. Stabil. Dyn., 20(06), 2040011. https://doi.org/10.1142/S0219455420400118
  51. Liu, H., Wei, N., Wang, Z.F., Wang, X.T. and Ma, Y. (2017), "Fabrication and properties of aluminum silicate fibrous materials with in situ synthesized K2Ti6O13 whiskers", Int. J. Miner. Metall. Mater., 24(11), 1335-1340. https://doi.org/10.1007/s12613-017-1525-z
  52. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., Int. J., 30(3), 271-280. http://dx.doi.org/10.12989/scs.2019.30.3.271
  53. Ma, X., Zhang, K., Zhang, L., Yao, C., Yao, J., Wang, H., Jian, W. and Yan, Y. (2021), "Data-driven niching differential evolution with adaptive parameters control for history matching and uncertainty quantification", SPE Journal, 26(02), 993-1010. https://doi.org/10.2118/205014-PA
  54. Majedi, M., Afrazi, M. and Fakhimi, A. (2020), "FEM-BPM simulation of SHPB testing for measurement of rock tensile strength", Proceedings of the 54th US Rock Mechanics/Geomechanics Symposium, American Rock Mechanics Association.
  55. Majedi, M.R., Afrazi, M. and Fakhimi, A. (2021), "A micromechanical model for simulation of rock failure under high strain rate loading", Int. J. Civil Eng., 19(5), 501-515. https://doi.org/10.1007/s40999-020-00551-2
  56. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6
  57. Milovancevic, M., Marinovic, J. S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.-T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Statist. Mech. Applicat., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169
  58. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853
  59. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014
  60. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  61. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  62. Mousavi, A.A., Zhang, C., Masri, S.F. and Gholipour, G. (2020), "Structural damage localization and quantification based on a ceemdan hilbert transform neural network approach: A model steel truss bridge case study", Sensors, 20(5), 1271. https://doi.org/10.3390/s20051271
  63. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., Int. J., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279
  64. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., Int. J., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347
  65. Narayanan, S. and Balamurugan, V. (2003), "Finite element modelling of piezolaminated smart structures for active vibration control with distributed sensors and actuators", J. Sound Vib., 262(3), 529-562. https://doi.org/10.1016/S0022-460X(03)00110-X
  66. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543. http://dx.doi.org/10.12989/scs.2018.27.5.537
  67. Nasser, H., Kiefer-Kamal, E.-H., Hu, H., Belouettar, S. and Barkanov, E. (2012), "Active vibration damping of composite structures using a nonlinear fuzzy controller", Compos. Struct., 94(4), 1385-1390. https://doi.org/10.1016/j.compstruct.2011.11.022
  68. Newman, S.M. (1992), Active damping control of a flexible space structure using piezoelectric sensors and actuators, NAVAL POSTGRADUATE SCHOOL MONTEREY CA.
  69. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., Int. J., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425
  70. Pul, M. (2020), "Effect of sintering temperature on pore ratio and mechanical properties of composite structure in nano graphene reinforced ZA27 based composites", Int. J. Miner. Metall. Mater., 27(2), 232-243. https://doi.org/10.1007/s12613-019-1926-2
  71. Qi, C., Chen, Q. and Kim, S.S. (2020a), "Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization", Miner. Eng., 155, 106422. https://doi.org/10.1016/j.mineng.2020.106422
  72. Qi, C., Spagnoli, D. and Fourie, A. (2020b), "Structural, electronic, and mechanical properties of calcium aluminate cements: Insight from first-principles theory", Constr. Build. Mater., 264, 120259. https://doi.org/10.1016/j.conbuildmat.2020.120259
  73. Qiu, Z.C., Zhang, X.M., Wu, H.X. and Zhang, H.H. (2007), "Optimal placement and active vibration control for piezoelectric smart flexible cantilever plate", J. Sound Vib., 301(3-5), 521-543. https://doi.org/10.1016/j.jsv.2006.10.018
  74. Rajaei, S., Shoaei, P., Shariati, M., Ameri, F., Musaeei, H.R., Behforouz, B. and de Brito, J. (2021), "Rubberized alkali-activated slag mortar reinforced with polypropylene fibres for application in lightweight thermal insulating materials", Constr. Build. Mater., 270, 121430. https://doi.org/10.1016/j.conbuildmat.2020.121430
  75. Reddy, B.E., Tomkin, J., Lambert, D.L. and Prieto, C.A. (2003), "The chemical compositions of Galactic disc F and G dwarfs", Monthly Notices of the Royal Astronomical Society, 340(1), 304-340. https://doi.org/10.1046/j.1365-8711.2003.06305.x
  76. Reis, J.C. and Costa, J.S.D. (2012), "Design and experimental control of an active-flexible tubular manipulator link", J. Intell. Mater. Syst. Struct., 23(15), 1741-1757. https://doi.org/10.1177/1045389X12451194
  77. Repinaldo, J.P., Faria, A.W., Koroishi, E.H. and Lara-Molina, F.A. (2020), "Neuro-Fuzzy modal control of smart laminated composite structures modeled via mixed theory and high-order shear deformation theory", Latin Am. J. Solids Struct., 17(2). https://doi.org/10.1590/1679-78255873
  78. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413
  79. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  80. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Applicat., 124046. https://doi.org/10.1016/j.physa.2019.124046
  81. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., Int. J., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417
  82. Saridemir, M. (2014), "Effect of specimen size and shape on compressive strength of concrete containing fly ash: Application of genetic programming for design", Mater. Des., (1980-2015) 56, 297-304. 10.1016/j.matdes.2013.10.073
  83. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335
  84. Shah, S., Sulong, N.R., Shariati, M. and Jumaat, M. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  85. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016a), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  86. Shah, S., Sulong, N.R., Khan, R., Jumaat, M. and Shariati, M. (2016b), "Behavior of industrial steel rack connections", Mech. Syst. Signal Process., 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026
  87. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., Int. J., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185
  88. Shariati, M. (2008), Assessment of Building Using None-destructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer), Universiti Putra Malaysia.
  89. Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  90. Shariati, M. (2020), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., Int. J., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599
  91. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  92. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11+), Seoul, Korea, August.
  93. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  94. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  95. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  96. Shariati, M., Azar, S.M., Arjomand, M.-A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., Int. J., 19(6), 473-484. https://doi.org/10.12989/gae.2019.19.6.473
  97. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.-T. and Salih, M.N. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., Int. J., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569
  98. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., Int. J., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553
  99. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534
  100. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019e), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319
  101. Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019f), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., Int. J., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225
  102. Shariati, M., Trung, N.-T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019g), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427
  103. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020a), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., Int. J., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393
  104. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020b), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., Int. J., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587
  105. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020c), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0
  106. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020d), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., Int. J., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155
  107. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020e), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183
  108. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020f), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., Int. J., 34(3), 377-397. https://doi.org/10.12989/scs.2020.34.3.377
  109. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020g), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886
  110. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020h), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., Int. J., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237
  111. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020i), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x
  112. Sharma, M., Singh, S. and Sachdeva, B. (2007), "Modal control of a plate using a fuzzy logic controller", Smart Mater. Struct., 16(4), 1331. https://doi.org/10.1088/0964-1726/16/4/047
  113. Song, H.J., Ming, G.L., He, Z., Lehmann, M., McKerracher, L., Tessier-Lavigne, M. and Poo, M.M. (1998), "Conversion of neuronal growth cone responses from repulsion to attraction by cyclic nucleotides", Science, 281(5382), 1515-1518. https://doi.org/10.1126/science.281.5382.1515
  114. Sun, L., Li, C., Zhang, C., Su, Z. and Chen, C. (2018), "Early monitoring of rebar corrosion evolution based on FBG sensor", Int. J. Struct. Stabil. Dyn., 18(08), 1840001. https://doi.org/10.1142/S0219455418400011
  115. Sun, L., Li, C., Zhang, C., Liang, T. and Zhao, Z. (2019a), "The strain transfer mechanism of fiber bragg grating sensor for extra large strain monitoring", Sensors, 19(8), 1851. https://doi.org/10.3390/s19081851
  116. Sun, L., Su, Z., Xia, Y., Zhang, C. and Li, C. (2019b), "Superwide-range fiber bragg grating displacement sensor based on an eccentric gear: Principles and experiments", J. Aerosp. Eng., 32(1), 04018129. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000960
  117. Sun, L., Yang, Z., Jin, Q. and Yan, W. (2020), "Effect of Axial Compression Ratio on Seismic Behavior of GFRP Reinforced Concrete Columns", Int. J. Struct. Stabil. Dyn., 20(06), 2040004. https://doi.org/10.1142/S0219455420400040
  118. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623
  119. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf, 1-9. https://doi.org/10.1007/s10845-016-1217-y
  120. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  121. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997
  122. Tran, T.C., Brandstetter, P. and Vo, H.H. (2019), "The Sensorless Speed Controller of Induction Motor in DFOC Model Based on the Voltage and Current", J. Adv. Eng. Computat., 3(1), 320-328. http://dx.doi.org/10.25073/jaec.201931.228
  123. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415
  124. Wang, Y. and Inman, D.J. (2011), "Comparison of control laws for vibration suppression based on energy consumption", J. Intell. Mater. Syst. Struct., 22(8), 795-809. https://doi.org/10.1177/1045389X11411213
  125. Wei, J.J., Qiu, Z.C. and Wang, Y.C. (2010), "Experimental comparison research on active vibration control for flexible piezoelectric manipulator using fuzzy controller", J. Intell. Robotic Syst., 59(1), 31-56. https://doi.org/10.1007/s10846-009-9390-2
  126. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399. http://dx.doi.org/10.12989/scs.2018.27.3.389
  127. Wen, T., Wei, L., Chen, X. and Pei, C.-l. (2011), "Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process", Int. J. Miner. Metall. Mater., 18(1), 70-76. https://doi.org/10.1007/s12613-011-0402-4
  128. Worden, K., Bullough, W.A. and Haywood, J. (2003), Smart Technologies, World Scientific.
  129. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., Int. J., 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433
  130. Xu, H.-B., Zhang, C.-W., Li, H., Tan, P., Ou, J.-P. and Zhou, F.-L. (2014a), "Active mass driver control system for suppressing wind-induced vibration of the Canton Tower", Smart Struct. Syst., Int. J., 13(2), 281-303. https://doi.org/10.12989/sss.2014.13.2.281
  131. Xu, H., Zhang, C., Li, H. and Ou, J. (2014b), "Real-time hybrid simulation approach for performance validation of structural active control systems: a linear motor actuator based active mass driver case study", Struct. Control Health Monitor., 21(4), 574-589. https://doi.org/10.1002/stc.1585
  132. Yang, Y., Jin, Z. and Soh, C.K. (2005), "Integrated optimal design of vibration control system for smart beams using genetic algorithms", J. Sound Vib., 282(3-5), 1293-1307. https://doi.org/10.1016/j.jsv.2004.03.048
  133. Yang, Y., Yao, J., Wang, C., Gao, Y., Zhang, Q., An, S. and Song, W. (2015), "New pore space characterization method of shale matrix formation by considering organic and inorganic pores", J. Natural Gas Sci. Eng., 27, 496-503. https://doi.org/10.1016/j.jngse.2015.08.017
  134. Yang, Y., Li, Y., Yao, J., Iglauer, S., Luquot, L., Zhang, K., Sun, H., Zhang, L., Song, W. and Wang, Z. (2020), "Dynamic pore-scale dissolution by CO2-saturated brine in carbonates: Impact of homogeneous versus fractured versus vuggy pore structure", Water Resour. Res., 56(4), e2019WR026112. https://doi.org/10.1029/2019WR026112
  135. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Cleaner Produc., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138
  136. Ye, M., Jiang, J., Chen, H., Zhou, H. and Song, D. (2021), "Seismic behavior of an innovative hybrid beam-column connection for precast concrete structures", Eng. Struct., 227, 111436. https://doi.org/10.1016/j.engstruct.2020.111436
  137. Younespour, A. and Ghaffarzadeh, H. (2015), "Structural active vibration control using active mass damper by block pulse functions", J. Vib. Control, 21(14), 2787-2795. https://doi.org/10.1177/1077546313519285
  138. Zhang, C. and Mousavi, A.A. (2020), "Blast loads induced responses of RC structural members: State-of-the-art review", Compos. Part B: Eng., 195, 108066. https://doi.org/10.1016/j.compositesb.2020.108066
  139. Zhang, C. and Wang, H. (2019a), "Robustness of the active rotary inertia driver system for structural swing vibration control subjected to multi-type hazard excitations", Appl. Sci., 9(20), 4391. https://doi.org/10.3390/app9204391
  140. Zhang, C. and Wang, H. (2019b), "Swing vibration control of suspended structure using active rotary inertia driver system: Parametric analysis and experimental verification", Appl. Sci, 9(15), 3144. https://doi.org/10.3390/app9153144
  141. Zhang, C., Alam, Z., Sun, L., Su, Z. and Samali, B. (2019), "Fibre Bragg grating sensor-based damage response monitoring of an asymmetric reinforced concrete shear wall structure subjected to progressive seismic loads", Struct. Control Health Monitor., 26(3), e2307. https://doi.org/10.1002/stc.2307
  142. Zhang, C., Gholipour, G. and Mousavi, A.A. (2020), "State-of-the-art review on responses of RC structures subjected to lateral impact loads", Arch. Computat. Methods Eng., 28, 2477-2507. https://doi.org/10.1007/s11831-020-09467-5
  143. Zhang, K., Zhang, J., Ma, X., Yao, C., Zhang, L., Yang, Y., Wang, J., Yao, J. and Zhao, H. (2021), "History matching of naturally fractured reservoirs using a deep sparse autoencoder", SPE Journal, 1-22. https://doi.org/10.2118/205340-PA
  144. Zheng, J., Zhang, C. and Li, A. (2020), "Experimental investigation on the mechanical properties of curved metallic plate dampers", Appl. Sci., 10(1), 269. https://doi.org/10.3390/app10010269
  145. Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018), "The multi-axial strength performance of composited structural BCW members subjected to shear forces", Steel Compos. Struct., Int. J., 27(1), 75-87. http://dx.doi.org/10.12989/scs.2018.27.1.075
  146. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067
  147. Zoric, N., Simonovic, A., Mitrovic, Z. and Stupar, S. (2013), "Active vibration control of smart composite beams using PSO-optimized self-tuning fuzzy logic controller", J. Theor. Appl. Mech., 51(2), 275-286.
  148. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Optics Lasers Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006
  149. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Scientif. Reports, 7(1), 1-22. https://doi.org/10.1038/s41598-017-06837-1