DOI QR코드

DOI QR Code

RANS CFD simulation for slender floating bodies with forward speed and comparison to BEM with uniform-flow approximation

  • Bakti, Farid P. (Department of Ocean Engineering, Texas A&M University) ;
  • Kim, MooHyun (Department of Ocean Engineering, Texas A&M University)
  • Received : 2021.04.23
  • Accepted : 2021.05.26
  • Published : 2021.06.25

Abstract

The nonlinear wave-uniform current interaction for a slender floating body is investigated by using the commercial CFD (computational fluid dynamics) tool STAR-CCM+ and author-developed simplified BEM (boundary element method) based on potential theory and perturbation approach. The STAR-CCM+ solves the fully non-linear Reynold Averaged Navier Stoke's (RANS) equation for real fluid in the finite volume framework. The viscous effect is accounted for by mesh refinement and the k - ω turbulence closure model. Meanwhile, the fully non-linear body motion and free surface elevation are considered by the overset mesh and volume of fluid method, respectively. Two different input waves with different order of non-linearity are compared to see their effects on ship's motion and added resistance. A detailed step-by-step simulation setup is explained to ensure the reproducibility of the results. Several preliminary simulations such as static tank test, wave calibration, and towing tank case are also conducted for quality assurance. The CFD results show good agreements with both the BEM with Uniform Flow approximation (UF-BEM) and the experimental data by other researchers when the λ/L is large. The CFD simulation also shows that it can properly capture the second-order force (added resistance) and highly nonlinear motion with breaking waves close to the pitch resonance frequency. However, the CFD simulation requires substantially higher computational cost than the UF-BEM. The comparison study shows that the UF-BEM can produce reasonably good results for practical applications with significantly less computational time and human effort. On the other hand, the CFD program can be used for proof computations for special cases.

Keywords

Acknowledgement

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2017R1A5A1014883).

References

  1. Adapco, C.D. (2020), "STAR CCM+ User's Manual", http://www.cd-adapco.com/products/star-ccm.
  2. Arjen, K., et al. (2020), "Development and Verification of Modeling Practice for CFD Calculations to Obtain Current Loads on FPSO", Proceedings of the 39th International Conference on Ocean, Offshore & Arctic Engineering.
  3. Bakti, F.P. and Kim, M.H. (2020), "Second Order Difference Frequency Wave-Current Loading Using Neumann-Kelvin Approximation", Proceedings of the 39th International Conference on Ocean, Offshore & Arctic Engineering, Virtual Online, OMAE2020.
  4. Bakti, F.P., Jin, C. and Kim, M.H. (2021), "Practical Approach of Linear Hydro-elasticity Effect on Vessel with Forward Speed in the Frequency Domain", J. Fluid. Struct., 101, 103204, doi: 10.1016/j.jfluidstructs.2020.103204.
  5. Bakti, F.P., Kim, M.H., Park, J.C. and Kim, K.S. (2016), "Comparative study of standard WC-SPH and MPS solvers for free surface academic problems", Int. J. Offshore Polar Eng., 26(3), 235-243. https://doi.org/10.17736/ijope.2016.pf17
  6. Bandringa, H. and Helder, J.A. (2020), "On the Validity of CFD for Simulating Extreme Green Water Loads", Proceedings of the 39th International Conference on Ocean, Offshore & Arctic Engineering, Virtual, Online, OMAE2020.
  7. Beck, R.F. and Loken, A.E. (1989), "Three-dimensional effects in ship relative-motion problems", J. Ship Res., 33(4), 261-268. https://doi.org/10.5957/jsr.1989.33.4.261
  8. Bihs, H., Kamath, A., Alagan Chella, M., Aggarwal, A. and Arntsen, O.A. (2016), "A new level set numerical wave tank with improved density interpolation for complex wave hydrodynamics", Comput. Fluid., 140, 191-208. https://doi.org/10.1016/j.compfluid.2016.09.012
  9. Bouscasse, B., Bockman, A. and Ducrozet, G. (2020), "Development of A Protocol to Couple Wave and CFD Solvers Towards Potential Wave Kinematic Solver", Virtual, Online, OMAE2020.
  10. Brard, R. (1972), "Representation of a given ship form by singularity distributions when the boundary condition on the free surface is linearized", J. Ship Res., 16(1), 79-92. https://doi.org/10.5957/jsr.1972.16.1.79
  11. Celebi, M.S., Kim, M.H. and Beck, R.F. (1998), "Fully nonlinear 3D numerical wave tank simulations", J. Ship Res., 42(1), 33-45.
  12. Flock, A.K., Guildenbecher, D.R., Chen, J., Sojka, P.E. and Bauer, H.J. (2012), "Experimental statistics of droplet trajectory and air flow during aerodynamic fragmentation of liquid drops", Int. J. Multiphase Fl., 47, 37-49. https://doi.org/10.1016/j.ijmultiphaseflow.2012.06.008
  13. Guha, A. and Falzarano, J. (2015), "The effect of hull emergence angle on the near field formulation of added resistance", Ocean Eng., 105, 10-24. https://doi.org/10.1016/j.oceaneng.2015.06.012
  14. Guha, A. and Falzarano, J. (2016), "Estimation of hydrodynamic forces and motion of ships with steady forward speed", Int. Shipbuild. Progress, 62(3-4), 113-138. https://doi.org/10.3233/ISP-150118
  15. Hadzic, H. (2005), "Development and Application of a Finite Volume Method for the Computation of Flows Around Moving Bodies on Unstructured, Overlapping Grids", Dissertation, Technische Universitat Hamburg.
  16. Heilskov, N.F. and Petersen, O.S. (2016), "Non-Linear 3D Hydrodynamics of Floating Wind Turbine Compared Against Wave Tank Tests", Proceedings of the 35th International Conference on Ocean, Offshore & Arctic Engineering, Busan, South Korea.
  17. Irkal, M A.R., Nallayarasu, S. and Bhattacharyya, S.K. (2016), "CFD approach to roll damping of ship with bilge keel with experimental validation", Appl. Ocean Res., 55, 1-17. https://doi.org/10.1016/j.apor.2015.11.008
  18. Islam, H., Rahaman, M. and Akimoto, H. (2019), "Added Resistance Prediction of KVLCC2 in Oblique Waves", Am. J. Fluid Dynam., 9(1), 13-26.
  19. Jiao, J. and Huang, S. (2020), "CFD simulation of ship seakeeping performance and slamming loads in Bidirectional cross wave", J. Mar. Sci. Eng., 8(5), 1-24. https://doi.org/10.3126/jsce.v8i0.32857
  20. Jin, Y., Chai, S., Duffy, J., Chin, C. and Bose, N. (2017), "URANS predictions of wave induced loads and motions on ships in regular head and oblique waves at zero forward speed", J. Fluid. Struct., 74, 178-204. https://doi.org/10.1016/j.jfluidstructs.2017.07.009
  21. Journee, J.M.J. (1992), "Experiments and calculations on 4 Wigley hull forms in head waves", Delft University of Technology Report, no. May 1992, 1-99.
  22. Kashiwagi, M. (1995), "Prediction of Surge and its Effect on Added Resistance by Means of the Enhanced Unified Theory", Trans West-Japan Society of Naval Architects, 89, 77-89.
  23. Kashiwagi, M. (2013), "Hydrodynamic study on added resistance using unsteady wave analysis", J. Ship Res., 57(4), 220-240. https://doi.org/10.5957/JOSR.57.4.130036
  24. Kim, J., O'Sullivan, J. and Read, A. (2012), "Ringing analysis of a vertical cylinder by Euler overlay method", Proceedings of the 31st International Conference on Ocean, Offshore & Arctic Engineering, Rio de Janeiro, Brazil.
  25. Kim, K. H., and Kim, Y. (2010), "Comparative study on ship hydrodynamics based on Neumann-Kelvin and double-body linearizations in time-domain analysis," International Journal of Offshore and Polar Engineering, vol. 20, no. 4, pp. 265-274.
  26. Kim, S.J. and Koo, W. (2019), "Development of a three-dimensional fully non-linear potential numerical wave tank for a heaving buoy wave energy converter", Math. Probl.Eng., 2019(1).
  27. Muzaferija, S. and Peric, M. (2017), "Computation of free-surface flows using interface-tracking and interface- capturing methods", Fluid Dynamics and Ship Theory Section, Technical University of Hamburg, Hamburg.
  28. Ogilvie, T. and Tuck, E. (1969), "A rational strip theory of ship motions: part I", Naval Ship Systems Command General Hydromechanics Research Program Subproject SR 009 01 01 Report, no. N00014-67-A-0181-0016.
  29. Orihara, H. (2011), "Comparison of CFD simulations with experimental data for a tanker model advancing in waves", Int. J. Naval Archit. Ocean Eng., 3(1), 1-8. https://doi.org/10.3744/JNAOE.2011.3.1.001
  30. Papanikolaou, A. and Schellin, T. (1992), "A three-dimensional panel method for motions and loads of ships with forward speed", Ship Technol. Res.(Schiffstechnik), 39(4), 145-155.
  31. Sadat-Hosseini, H., Wu, P.C., Carrica, P.M., Kim, H., Toda, Y. and Stern, F. (2013), "CFD verification and validation of added resistance and motions of KVLCC2 with fixed and free surge in short and long head waves", Ocean Eng., 59, 240-273. https://doi.org/10.1016/j.oceaneng.2012.12.016
  32. Salvesen, N., Tuck, E. and Faltinsen, O. (1970), "Ship motions and sea loads", The Society of Naval Architects and Marine Engineers, 78, 250-287.
  33. Vigsnes, J.T. (2018), "Seakeeping Analysis Comparison between Viscous and Inviscid CFD", Dissertation, Norwegian University of Science and Technology, Dept. of Marine Engineering.
  34. White, F.M. (2006), Viscous fluid flow, 3rd ed. New York: McGraw-Hill.
  35. Wilcox, D.C. (1998), Turbulence Modeling for CFD, 2nd ed. La Canada, California: DCW Industries.
  36. Wu, C.S., Zhou, D.C., Gao, L. and Miao, Q.M. (2011), "CFD computation of ship motions and added resistance for a high speed trimaran in regular head waves", Int. J. Naval Architect. Ocean Eng., 3(1), 105-110. https://doi.org/10.3744/JNAOE.2011.3.1.105