DOI QR코드

DOI QR Code

Numerical assessment of the damage-tolerance properties of polyester ropes and metallic strands

  • Beltran, Juan F. (Department of Civil Engineering, University of Chile) ;
  • Bravo, Tomas P. (Department of Civil Engineering, University of Chile)
  • 투고 : 2020.06.13
  • 심사 : 2021.05.18
  • 발행 : 2021.07.10

초록

Experimental and numerical studies have concluded that two of the main phenomena that govern the static response of damaged ropes and strands are the strain localization and asymmetry in damage distribution. In this paper, the dependency of the damage-tolerance properties and the accumulated damage level experienced up to the onset of failure on these two phenomena is investigated. To this end, a nonlinear model that couples the effects of these two phenomena is utilized to study the static response of damaged polyester ropes and metallic (steel and aluminium) strands. In particular, the residual stiffness, the residual strength, the reduction in the deformation capacity, and the accumulated damage, based on residual toughness values, are computed for a wide range of initial damage levels exerted on the ropes and strands. Experimental static tensile test data are used to validate the predictions provided by the nonlinear model in which initial damage levels and specimens diameters vary from 5% to 55% and 6mm to 166 mm respectively. Results indicate that the nonlinear model is capable of establishing the main phenomena that rules specimens response providing an accurate prediction of the damage tolerance-parameters and the damage level accumulated at the onset of specimens failure.

키워드

참고문헌

  1. ABS (2011), Guidance Notes on: The Application of Fiber Rope for Offshore Mooring, Houston, USA.
  2. Bathe, K.J. (1994), Finite Element Procedures, Prentice-Hall, NJ, USA.
  3. Beltran, J.F. and Williamson, E.B. (2010), "Numerical simulation of damage localization in polyester mooring ropes", J. Eng. Mech., 136(8) 945-959. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000129.
  4. Beltran, J.F. and Williamson, E.B. (2011), "Numerical procedure for the analysis of polyester damaged ropes", Eng. Struct., 33(5), 1698-1709. https://doi.org/10.1016/j.engstruct.2011.02.007.
  5. Beltran, J.F. and De Vico, E. (2015), "Assessment of static rope behavior with asymmetric damage distribution", Eng. Struct., 86, 84-98. https://doi.org/10.1016/j.engstruct.2014.12.026.
  6. Beltran, J.F., Ramirez, N. and Williamson, E.B. (2017), "Simplified analysis of the influence of strain localization and asymmetric damage distribution on static damaged polyester rope behavior", Ocean Eng., 145, 237-249. https://doi.org/10.1016/j.oceaneng.2017.09.006.
  7. Beltran, J.F., Nunez, E., Nunez, F., Silva, I., Bravo, T. and Moffat, R. (2018), "Static response of asymmetrically damaged metallic strands: Experimental and numerical approach", Constr. Build. Mater., 192, 538-554. https://doi.org/10.1016/j.conbuildmat.2018.10.092.
  8. Beltran, J.F. and Bravo, T. (2020), "Evaluation of the coupled effect of strain localization and asymmetric damage distribution on rope response: Numerical approach based on a nonlinear cable-beam element", Eng. Struct., 207, 110258. https://doi.org/10.1016/j.engstruct.2020.110258.
  9. Chaplin, C.R. (1999), "Torsional failure of wire rope mooring line during installation in deep water", Eng. Fail. Anal., 6(2), 67-82. https://doi.org/10.1016/S1350-6307(98)00043-0.
  10. Chaplin, C.R. (2005), "The fatigue and degradation mechanisms of hoisting ropes", Hoist and Haul Conference, Perth, Australia, September.
  11. Chen, B., Wu, J., Ouyang, Y. and Yang, D. (2018), "Response evaluation and vibration control of a transmission tower-line system in mountain areas subjected to cable rupture", Struct. Monit. Maint., 5(1), 151-171. https://doi.org/10.12989/smm.2018.5.1.151.
  12. Cholewa, W. (1989), "Wire fracture and weakening of wire rope", Wire Rope Discard Criteria: Round Table Conference. Swiss Federal Institute of Technology (ETH), Institute of Lightweight Structures and Ropeways, Zurich, Switzerland, September.
  13. Duyi, Y. and Zhenlin, W. (2001), "A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cycle plastic strain energy during fatigue", Int. J. Fatig., 23, 679-687. https://doi.org/10.1016/S0142-1123(01)00027-5.
  14. Evans, J.J., Ridge, I.M.L. and Chaplin, C.R. (2001), "Wire failures in ropes and their influence on local wire strain behavior in tension-tension fatigue", J. Strain Anal., 36(2), 231-244. https://doi.org/10.1243/0309324011512667.
  15. Huang, Y., Gan, Q., Huang, S. and Wang, R. (2018), "A dynamic finite element method for the estimation of cable tension", Struct. Eng. Mech., 68(4), 399-408. https://doi.org/10.12989/sem.2018.68.4.399.
  16. Kim, S. and Kang Y.J. (2016), "Structural behavior of cable-stayed bridges after cable failure", Struct. Eng. Mech., 59(6), 1095-1120. https://doi.org/10.12989/sem.2016.59.6.1095.
  17. Kim, J., Lee, J. and Sohn, H. (2018), "Detection of tension force reduction in a post-tensioning tendon using pulsed-eddycurrent measurement", Struct. Eng. Mech., 65(2), 129-139. https://doi.org/10.12989/sem.2018.65.2.129.
  18. Lanteigne, J. (1985), "Theoretical estimation of the response of helically armoured cables of tension, torsion, and bending", J. Appl. Mech., 52, 423-432. https://doi.org/10.1115/1.3169064.
  19. Lemaitre, J. and Chaboche, J. (1990), Mechanics of Solids Materials, Cambridge University Press, Cambridge, UK.
  20. Li, D., Miyase, A., Williams, J.G. and Wang, S.S. (2002), "Damage tolerance of synthetic- fiber mooring ropes: small-scale experiments and analytical evaluation of damaged subropes and elements", Technical Report, CEAC-TR-03-0101, University of Houston, USA.
  21. Luongo, A. and Zulli, D. (2013), Mathematical Models of Beams and Cables, Wiley & Sons, Inc., NJ, USA.
  22. MacDougall, C. and Bartlett, F. (2005), "Mechanical model for unbonded seven-wire tendon with symmetric wire breaks", J. Eng. Mech., 131(12), 1239-1247. https://doi.org/10.1061/(ASCE)07339399(2005)131:12(1239).
  23. MacDougall, C. and Bartlett, F. (2006), "Mechanical model for unbonded seven-wire tendon with single broken wire", J. Eng. Mech., 132(12), 1345-1353. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1345).
  24. Meksem, A., El Ghorba, M., Benali, A. and El Barkany, A. (2011),"Optimization by the reliability of the damage by tiredness of a wire rope of lifting", Appl. Mech. Mater., 61, 15-24. https://doi.org/10.4028/www.scientific.net/AMM.61.15.
  25. Mouradi, H., El Barkany, A. and El Biyaali, A. (2018), "Steel wire ropes failure analysis: Experimental study", Eng. Fail. Anal., 91, 234-242. https://doi.org/10.1016/j.engfailanal.2018.04.019.
  26. Mozos, C.M. and Aparicio, A.C. (2010a), "Parametric study on the dynamic response of cable stayed bridges to the sudden failure of a stay, Part I: Bending moment acting on the deck", Eng. Struct., 32(10), 3288-3300. https://doi.org/10.1016/j.engstruct.2010.07.003
  27. Mozos, C.M. and Aparicio, A.C. (2010b), "Parametric study on the dynamic response of cable stayed bridges to the sudden failure of a stay, Part II: Bending moment acting on the pylons and stress on the stays", Eng. Struct., 32(10), 3301-3312. https://doi.org/10.1016/j.engstruct.2010.07.002.
  28. Raoof, M. (1991), "Wire recovery length in a helical strand under axial fatigue loading", Int. J. Fatig., 13(2), 127-132. https://doi.org/10.1016/0142-1123(91)90004-I.
  29. Reddy, J.N. (2015). An Introduction to Nonlinear Finite Element Analysis, Oxford University Press, Oxford, UK.
  30. Wahid, A., Mouhid, N., Ouardi, A., Sabah, F., Chakir, H. and ELghorba, M. (2019), "Experimental prediction of wire rope damage by energy method", Eng. Struct., 201, 109794. https://doi.org/10.1016/j.engstruct.2019.109794.
  31. Ward, E.G., Ayres, R., Banfield, S. and O'Hear, N. (2006). "Full scale experiments on damaged polyester rope", Technical Report, JIP-FP-1, Offshore Technology Research Center.
  32. Xia, Q., Wu, J., Zhu, X. and Zhang, J. (2017), "Experimental study of vibration characteristics of FRP cables based on Long-Gauge strain", Struct. Eng. Mech., 63(6), 735-742. https://doi.org/10.12989/sem.2017.63.6.735
  33. Yang, Y.B.and Kuo S.R. (1994), Theory and Analysis of Nonlinear Framed Structures, Prentice Hall, Singapore.
  34. Zhang, J., Au, F. and Yang, D. (2020), "Finite element model updating of long-span cable-stayed bridge by Kriging surrogate model", Struct. Eng. Mech., 74(2), 157-173. https://doi.org/10.12989/sem.2020.74.2.157.