Journal of the Semiconductor & Display Technology (반도체디스플레이기술학회지)

The Korean Society Of Semiconductor & Display Technology (한국반도체디스플레이기술학회)
권호 표지

Comparative Analysis on the Surface Property of SKD 61 Die-casting Steel Using Multilayer PVD Coating

다층 PVD 코팅을 이용한 SKD 61다이캐스팅 강의 표면 특성 비교 분석

  • 김승욱 (구미대학교 기계공학과)
  • Received : 2021.05.03
  • Accepted : 2021.06.18
  • Published : 2021.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The properties of materials which are widely used in industry fields like automobile, shipbuilding, casting, and electronics are strongly needed to have higher surface hardness, lower surface roughness, and higher compressive residual stress. As mentioned above, for the purpose of satisfying three factors, a variety of researches with respect to surface improvement have been actively studied and applied to every industry. SKD61 which is mostly used for die casting process of cold chamber method must meet a countless number of problems which are thermal, mechanical and chemical from highly specific working environment at high temperature over 600℃. Above all, in case of plunger sleeves used for die casting process, thermal fatigue has a bad effect on the surface of an inlet where molten metal is repeatedly injected. On account of it, plunger sleeves cause manufacturers to deteriorate quality of products. Therefore, in this paper, to improve the surface of an inlet of plunger sleeve, multilayer PVD coating using Ti, Cr and Mo is suggested. Furthermore, The surface characteristics such as surface roughness(Rsa, Rsq), surface hardness(HRB, HRC) and residual stress using XRD(X-ray diffractometer) of coated samples and specimens are studied and discussed.

Keywords

References

  1. Gyujin Park, Min-Woo Kang, Jae-Gil Jung, Young-Kook Lee, Byung-Hoon Kim, "The Effects of Homogenization, Hot-Forging, and Annealing Condition on Microstructure and Hardness of a Modified STD61 Hot-Work Tool Steel", J. of the Korean Society for Heat Treatment, Vol. 26, No. 2, pp. 72-79, 2013. https://doi.org/10.12656/jksht.2013.26.2.72
  2. S. W. Kim, S. R. Lee, Y. K. Kim, W. K. Lee, D. Y. Lee, "Development of Die-casting Plunger Sleeve for Separation and Structure Analysis via Tread Joint", Conf of KSPE, pp.596-597,
  3. F. Miglierina, B. Vianello, "Shot Sleeve With Integral Thermal Regulation", Proceedings of 6th Tooling int. Conf. on The use of Tool Steels, Vol. 2. pp. 1317-1341, 2002.
  4. Yucong Wang, "A study of PVD coatings and die materials for extended die-casting die life", Surface and Coatings Technology, Vol .94-95, pp. 60-63, 1997. https://doi.org/10.1016/S0257-8972(97)00476-3
  5. R.Shivpuri, M. Yu, K.Venkatesan, Y.-L Chu, "A study of erosion in die casting dies by a multiple pin accelerated erosion test", Journal of Materials Engineering and Performance, Vol. 4, Issue 2, pp. 145-153, 1995. https://doi.org/10.1007/BF02664107
  6. Banh Tien Long, Ngo Cuong, Nguyen Huu Phan and Vijay Kumar S. Jatti, "Surface improvement of SKD61 die steel material after electrical discharge machining with graphite electrode", Jounal of Chemical and Pharmaceutical Research, 2015,7(7):1204-1211.
  7. R. Shivpuri, Y. L. Chu, K. Venkatesan, J. R. Conrad, K. Sridhara, M. Shamim, R. P. Fetherston, "An evaluation of metallic coatings for erosive wear resistance in die casting applications", Wear, Vol. 192, Issues 1-2, pp. 49-55, 1996. https://doi.org/10.1016/0043-1648(95)06749-3
  8. C. M. Seo and S. Y. Oh, "Fatigue and Fracture Mechanics", Won Chang, pp. 50-61, 2009.
  9. Shu-Hung Yeh, Liu-Ho Chiu, Tao-Liang Chuang, Cheng-Yen Wu, "Thermal Fatigue Behavior Evaluation of Shot-Peened JIS SKD61 Hot-Work Mold Steel", Material Transactions, Vol.54, No.6, pp.1053-1056, 2013. https://doi.org/10.2320/matertrans.M2013019
  10. https://www.dcu.ie/mechanical_engineering/technical/undergrad/milling_guide.shtml.
  11. http://serc.carleton.edu/research_education/geochemsheets/techniques/XRD.html.
  12. J.P. Nobre, M.Kornmeier, A.M. Dias, B. Scholtes, "Use of the hole-drilling method for measuring residual stresses in highly stressed shot-peened surface", Experimental Mechanics, Vol .40, Issue 3, pp 289-297, 2000. https://doi.org/10.1007/BF02327502
  13. Dong-Woo Lee and Seok-Swoo Cho, "Comparison of X-ray residual stress measurements for rolled steels", International Journal of precision Engineering and Manufacturing December, Vol. 12, Isssue 6, pp. 1001-1008, 2011. https://doi.org/10.1007/s12541-011-0133-5
  14. Sung-Youn Chun, Ji-Won Baek, "A Comparative Study of CrN Coatings Deposited by DC and Asymmetric Bipolar Pulsed DC Sputtering", J. Kor. Inst. Surf. Eng. Vol.47, No.2. pp 86-92, 2014. https://doi.org/10.5695/JKISE.2014.47.2.086
  15. Yang-Soon Park, Sun-Ho Han and Kyuseok Song, "Oxidation behavior on the surface of titanium metal specimens at high temperatures (300~1000℃)", Analytical Sciencce & Technology Vol. 22, No.6, 464-470, 2009.
  16. J. Winiarski, W. Tylus, K. Winiarska, B. Szczygiel, "The influence of molybdenum on the corrosion resistance of ternary Zn-Co-Mo alloy coatings deposited from citratesulphate bath", Corrosion Science February, Vol.91, pp. 330-340, 2015. https://doi.org/10.1016/j.corsci.2014.11.037
  17. Confocal Laser Scanning Microscopy operating manual, ZEISS.