Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Wind Flow Variation with Wing Development of Space-Reduced Damper

공간축소형 댐퍼의 날개개도에 따른 풍량변화 특성평가

  • Received : 2021.03.25
  • Accepted : 2021.06.10
  • Published : 2021.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

An experimental device was designed to control the opening of a damper via operating the folding blade drive of the device and to control the amount of air flowing through the damper. In addition, an inverter was installed in the blower to control its fan rotation speed and hence the amount of air flowing through the damper. An experimental study was conducted on the opening of the folding blade damper and changes in the rotational speed of the blower. From the results, the theoretical air volume of the folding blade damper and experimental air volume were observed to be in good agreement within an error range of ±3%. As the mass flow rate of the air passing through the folding blade damper increases proportionally with the changes in damper opening and fan rotation speed, the performance of the damper can be controlled proportionally. The mass flow rate was also observed to increase linearly; therefore, the mass flow rate of the air passing through the folding blade damper increases proportionally with changes in the rotation speed of the blower, such that the performance of the damper is proportional to a constant air volume even with varying rotation speeds of the blower.

Keywords

References

  1. Vadialaa, H., Sonib, D. P. and Panchalc, D. G., "Semi-Active Control of a Benchmark Building using Neuro-Inverse Dynamics of MR Damper", Procedia Engineering, Vol. 51, pp. 45-54. 2013. https://doi.org/10.1016/j.proeng.2013.01.010
  2. Lee, C. B., Cheon, J. S., Kim, S. H., Park, J. Y. and Joo, H. K., "Metal Fuel Development and Verification for Prototype Generation IV Sodium-Cooled Fast Reactor", Nuclear Engineering and Technology, Vol. 48, No. 5, pp. 1096~1108, 2016. https://doi.org/10.1016/j.net.2016.08.001
  3. Yoo, J. W., Chang, J. W., Lim, J. Y., Cheon, J. S., Lee, T. H., Kim, S. K., Lee, K. L. and Joo, H. K., "Overall System Description and Safety Characteristics of Prototype Gen IV Sodium Cooled Fast Reactor in Korea", Nuclear Engineering and Technology, Vol. 48, No. 5, pp. 1059~1070. 2016. https://doi.org/10.1016/j.net.2016.08.004
  4. You, Y. H., Ahn, H. J., "A Passive Reaction Force Compensation (RFC) Mechanism for a Linear Motor Motion Stage", IJPEM, Vol. 15, No. 5, pp 1-5, 2014.
  5. Lee, H. S., Yoon, K. H., Cheon, J. S. and Lee, C. B., "Integrity Evaluation of Control Rod Assembly for Sodium-Cooled Fast Reactor due to Drop Impact", Transactions of the Korean Society of Mechanical Engineers A, Vol. 41, No. 3, pp. 233~239, 2014. https://doi.org/10.3795/KSME-A.2017.41.3.233
  6. Kim, H. S., Seong, M. S., Choi, S. B. and Kwon, O. Y., "Terformance Evaluation of a Full Vehicle with Semi-active MR Suspension at Different Tire Pressure", Transactions of the KSNVE, Vol. 21, No. 11, pp. 1067~1073. 2011. https://doi.org/10.5050/KSNVE.2011.21.11.1067
  7. Lee, G. M., Ju, Y. H. and Park, M. S., "Development of a Low Frequency Shaker using MR Dampers", International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 9, pp. 1647~1650, 2013. https://doi.org/10.1007/s12541-013-0222-8
  8. Seong, M. S., Choi, S. B., Kim, C. H., Lee, H. K., Baek, J. H., Han, H. H. and Woo, J. K., "Experimental Performance Evaluation of MR Damper for Integrated Isolation Mount", Transactions of the KSNVE, Vol. 20, No. 12, pp. 1161~1167, 2010. https://doi.org/10.5050/KSNVE.2010.20.12.1161
  9. Kim, G. W., Yoon, S. S., Kim, K. C., Lee, M. W. and Kang, M. C. "A Study on the Removal Characteristics of a Radioactively Contaminated Oxide Film from the Irradiated Stainless Steel Surface Using Short Pulsed Laser Avlation", Journal of the Korean Scociety of Manufacturing Process Engineers, Vol. 19, No. 10, pp. 105-110, 2020.
  10. Ahn, H. J., You, Y .H., "An Eddy Current Damper for Reaction Force Compensation for a Linear Motor Motion Stage", 14th ISMB, Linz, Austria, Aug. 11-14, 2014.