Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Parametric Analysis of Thermal Effects on Multi Layered Laser Welding

다중적층 소재 레이저용접 인자별 열영향 해석

  • Choi, Se-Hoon (Graduate School of Mechanical Engineering, Keimyung Univ.) ;
  • Choi, Hae-Woon (Dept, of Mechanical Engineering Keimyung Univ.)
  • 최세훈 (계명대학교 대학원 기계공학과) ;
  • 최해운 (계명대학교 기계공학전공)
  • Received : 2015.12.05
  • Accepted : 2015.12.11
  • Published : 2021.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Polymers, polymer compounds, are very moldable at low temperatures and have good strength against weight, and hence, are often used in the interior and exterior materials of cars. Owing to the increasing environmental problems, emission regulations have become stricter, which has increased the use of lightweight polymers as substitutes for metal materials. Therefore, as the use of polymer increases, extensive research is being conducted on the bonding technology of polymers, such as polyurethane and epoxy. However, the increased cost and environmental pollution by adhesives caused by the polymer manufacturing plant depend on the chemical composition or the manufacturer's mix ratio. To compensate for this issue, a laser beam is irradiated through a highly permeable polymer (PC) placed on top of an absorbent polymer (ABS) to transfer the laser output to the ABS polymer and fuse them at the interface. Moreover, enabling laser penetrating bonding by placing a stainless steel wire mesh between the two polymers can achieve improved bonding strength compared to conventional heterogeneous polymer bonding.

Keywords

Acknowledgement

이 논문은 한국연구재단 연구비 지원(2019R1F1A1-062594)에 의하여 연구되었음.

References

  1. Choi, D., Shin, K., Han, Y., Hong, M., Cheong, S., Jeong, J., Na, K. and Ryu, H., "Experimental Evaluation of Defects in Laser-Transmission Welding of Heterogeneous Polymer Materials," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 30, No. 2, pp. 134-141, 2021. https://doi.org/10.7735/ksmte.2021.30.2.134
  2. Han, C., "A Study on the Identification of Polymer Joint Quality Based on Laser Bead Shape Using Deep Learning," Master thesis, Department of Mechanical Engineering Graduate School, Keimyung University, Republic of Korea, 2021.
  3. Kim, T. and Choi, H., "Study on Laser Welding of Al-Cu Dissimilar Material by Green Laser and Weld Quality Evaluation by Deep Learning," Journal of Welding and Joining, Vol. 39, No. 1, pp. 67-73, 2021. https://doi.org/10.5781/JWJ.2021.39.1.8
  4. Bang, H., Oh, C., Ro, C., Park, C. and Bang, H., "Analysis of Thermal and Welding Residual Stress for Hybrid Welding Joint by Finite Element Method," Journal of Korean Welding and Joining Society, Vol. 25, No. 6, pp. 565-570, 2007.
  5. Kim, D., Jeon, I., Park, H. and Seo, K., "Modification of Polypropylene for Improving the Laser Transmission Weld ability to Polycarbonate," The Polymer Society Of Korea, Vol. 37, No. 6, pp. 753-763, 2013. https://doi.org/10.7317/pk.2013.37.6.753
  6. Seo, M., Ryu, K. and Nam, G., "Study on the Laser Transmission-Welding of Thermoplastics," Journal of the Korean Society of Precision Engineering, Vol. 22, No. 9, pp. 34-40, 2005.
  7. Han, S., Han, S. and Kim, S., "A Review on Plastic Welding Technology with Diode Laser," Journal of Korean Welding and Joining Society, Vol. 26, No. 4, pp. 324-330, 2008.
  8. Song, C. and Choi, H., "Laser Energy Optimization for Dissimilar Polymer Joining," Journal of Welding and Joining, Vol. 32, No. 2, pp. 63-69, 2014. https://doi.org/10.5781/JWJ.2014.32.2.63
  9. Choi, H., "Analysis of Heat Transfer by Various Laser Beam Patterns in Laser Material Process," Journal of the Korea Society of Manufacturing Process Engineering, Vol. 17, No. 5, pp. 37-44, 2018. https://doi.org/10.14775/ksmpe.2018.17.5.037
  10. Choi, H., "Analysis of Laser Heat Distribution in Al-Cu Welding in Laser Material Process," Journal of the Korean Society of Manufacturing Process Engineering, Vol. 20, No. 2, pp. 1-7, 2021. https://doi.org/10.14775/ksmpe.2021.20.02.001