DOI QR코드

DOI QR Code

Bending analysis of the multi-phase nanocomposite reinforced circular plate via 3D-elasticity theory

  • Shao, Feng (College of Architecture and Urban Planning, Qingdao University of Technology) ;
  • Wang, Yanshang (Qingdao Fire Rescue Detachment) ;
  • Alzo'ubi, Abdel Kareem (A.K. Alzo'ubi, Civil Engineering Department, Abu Dhabi University) ;
  • Alwetaishi, Mamdooh (Department of Civil Engineering, College of Engineering, Taif University) ;
  • Khadimallah, Mohamed Amine (Prince Sattam bin Abdulaziz University, College of Engineering, Department of Civil Engineering)
  • Received : 2020.08.17
  • Accepted : 2021.07.14
  • Published : 2021.08.25

Abstract

In this article bending response of multi-phase nanocomposite (MPC) filled by circular plates (MPCCP) in the framework of the three-dimensional elasticity model under bi-directional initially stressed (BDIS) resting on non-polynomial elastic foundation for a broad range of boundary conditions is presented. The discrete singular convolution (SS-DSC) based on state-space is provided to evaluate the bending characteristics of MPCCP by considering various boundary conditions. Halpin-Tsai model and micro-scaled fibers have been applied in the hierarchy to anticipate the properties of bulk material of the multi-scaled composites. In order to model a disk, singular point has been analyzed. The graphene platelets (GPLs) are assumed to be oriented in random directions and distributed in uniform pattern in the epoxy resin matrix. Then, to provide the influences of primary stressed, elastic substrate and a range of pressure types on the bending behavior of the MPCCP, a parametric analysis has been conducted. Computational outcomes disclose that sinusoidal load is the best pressure for improving the deformation resistances and stress of the nanocomposite circular/annular plates.

Keywords

Acknowledgement

Taif University Researchers Supporting Project number (TURSP-2020/196), Taif University, Taif, Saudi Arabia.

References

  1. Abd El Aziz, M., Hemdan, A.M., Ewees, A.A., Elhoseny, M., Shehab, A., Hassanien, A.E. and Xiong, S. (2017), "Prediction of biochar yield using adaptive neuro-fuzzy inference system with particle swarm optimization", 2017 IEEE PES PowerAfrica.
  2. Abdel-Basset, M., El-Hoseny, M., Gamal, A. and Smarandache, F. (2019), "A novel model for evaluation Hospital medical care systems based on plithogenic sets", Artif. Intell. Med., 100, 101710. https://doi.org/10.1016/j.artmed.2019.101710.
  3. Abdel-Basset, M., Mohamed, M., Elhoseny, M., Chiclana, F. and Zaied, A.E.N.H. (2019), "Cosine similarity measures of bipolar neutrosophic set for diagnosis of bipolar disorder diseases", Artif. Intel. Med., 101, 101735. https://doi.org/10.1016/j.artmed.2019.101735.
  4. Abdel-Basset, M., Mohamed, R., Elhoseny, M., Chakrabortty, R.K. and Ryan, M. (2020), "A hybrid COVID-19 detection model using an improved marine predators algorithm and a rankingbased diversity reduction strategy", IEEE Access, 8, 79521-79540. https://doi.org/10.1109/ACCESS.2020.2990893.
  5. Abdelaziz, H.H., Meziane, M.A.A., Bousahla, A.A., Tounsi, A., Mahmoud, S. and Alwabli, A.S. (2017), "An efficient hyperbolic shear deformation theory for bending, buckling and free vibration of FGM sandwich plates with various boundary conditions", Steel Compos. Struct., 25(6), 693-704. https://doi.org/10.12989/scs.2017.25.6.693.
  6. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  7. Al-Furjan, M., Bolandi, S.Y., Habibi, M., Ebrahimi, F., Chen, G. and Safarpour, H. (2021), "Enhancing vibration performance of a spinning smart nanocomposite reinforced microstructure conveying fluid flow", Eng. with Comput., 1-16. https://doi.org/10.1007/s00366-020-01255-w.
  8. Al-Furjan, M., Dehini, R., Paknahad, M., Habibi, M. and Safarpour, H. (2021), "On the nonlinear dynamics of the multi-scale hybrid nanocomposite-reinforced annular plate under hygro-thermal environment", Arch. Civil Mech. Eng., 21(1), 1-25. https://doi.org/10.1007/s43452-020-00151-w.
  9. Al-Furjan, M., Habibi, M., Ebrahimi, F., Chen, G., Safarpour, M. and Safarpour, H. (2020), "A coupled thermomechanics approach for frequency information of electrically composite microshell using heat-transfer continuum problem", Eur. Phys. J. Plus. 135(10), 1-45. https://doi.org/10.1140/epjp/s13360-020-00764-3.
  10. Al-Furjan, M., Habibi, M., Ebrahimi, F., Mohammadi, K. and Safarpour, H. (2020), "Wave dispersion characteristics of high-speed-rotating laminated nanocomposite cylindrical shells based on four continuum mechanics theories", Waves in Random and Complex Media, 1-27. https://doi.org/10.1080/17455030.2020.1831099.
  11. Al-Furjan, M., Habibi, M. and Safarpour, H. (2020), "Vibration control of a smart shell reinforced by graphene nanoplatelets", Int. J. Appl. Mech., https://doi.org/10.1142/S1758825120500660.
  12. Al-Furjan, M., Habibi, M., won Jung, D., Chen, G., Safarpour, M. and Safarpour, H. (2020), "Chaotic responses and nonlinear dynamics of the graphene nanoplatelets reinforced doubly-curved panel", Eur. J. Mech.-A/Solids, 85 104091. https://doi.org/10.1016/j.euromechsol.2020.104091.
  13. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  14. Al-Furjan, M., Habibi, M., won Jung, D., Safarpour, H. and Safarpour, M. (2020), "On the buckling of the polymer-CNT-fiber nanocomposite annular system under thermo-mechanical loads", Mech. Based Des. Struc., 1-21. https://doi.org/10.1080/15397734.2020.1830106.
  15. Al-Furjan, M., Mohammadgholiha, M., Alarifi, I.M., Habibi, M. and Safarpour, H. (2020), "On the phase velocity simulation of the multi curved viscoelastic system via an exact solution framework", Eng. with Comput., 1-17. https://doi.org/10.1007/s00366-020-01152-2.
  16. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via two-dimensional analysis", Thin-Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  17. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020), "Wave propagation simulation in an electrically open shell reinforced with multi-phase nanocomposites", Eng. with Comput., 1-17. https://doi.org/10.1007/s00366-020-01167-9.
  18. Al-Furjan, M.S.H., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Semi-numerical and finite element modeling", Thin-Wall. Struct., 107242. https://doi.org/10.1016/j.tws.2020.107242.
  19. Ali, M., Jung, L.T., Abdel-Aty, A.H., Abubakar, M.Y., Elhoseny, M. and Ali, I. (2020), "Semantic-k-NN algorithm: An enhanced version of traditional k-NN algorithm", Exp. Syst. with Appl., 151, 113374. https://doi.org/10.1016/j.eswa.2020.113374.
  20. Alibeigloo, A. (2017), "Three dimensional coupled thermoelasticity solution of sandwich plate with FGM core under thermal shock", Compos. Struct., 177, 96-103. https://doi.org/10.1016/j.compstruct.2017.06.046.
  21. Alibeigloo, A. (2020), "Three-dimensional thermoelasticity analysis of graphene platelets reinforced cylindrical panel", Eur. J. Mech.-A/Solids. 81, 103941. https://doi.org/10.1016/j.euromechsol.2019.103941.
  22. Alibeigloo, A. and Noee, A.R.P. (2017), "Static and free vibration analysis of sandwich cylindrical shell based on theory of elasticity and using DQM", Acta Mechanica, 228(12), 4123-4140. https://doi.org/10.1007/s00707-017-1914-4
  23. Ansari, R., Torabi, J. and Shojaei, M.F. (2017), "Buckling and vibration analysis of embedded functionally graded carbon nanotube-reinforced composite annular sector plates under thermal loading", Compos. Part B: Eng., 109, 197-213. https://doi.org/10.1016/j.compositesb.2016.10.050.
  24. Bai, Y., Wang, S., Mou, B., Wang, Y. and Skalomenos, K.A. (2021), "Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener", Eng. Struct., 227, 111443 DOI: https://doi.org/10.1016/j.engstruct.2020.111443.
  25. Cao, B., Zhao, J., Yang, P., Yang, P., Liu, X., Qi, J., Simpson, A., Elhoseny, M., Mehmood, I. and Muhammad, K. (2019), "Multiobjective feature selection for microarray data via distributed parallel algorithms", Future Gener. Comp. Syst., 100, 952-981. https://doi.org/10.1016/j.future.2019.02.030.
  26. Chakrapani, S.K., Barnard, D.J. and Dayal, V. (2016), "Nonlinear forced vibration of carbon fiber/epoxy prepreg composite beams: Theory and experiment", Compos.Part B: Eng., 91, 513-521. DOI: https://doi.org/10.1016/j.compositesb.2016.02.009.
  27. Chen, C.S., Liu, F.H. and Chen, W.R. (2017), "Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments", Steel Compos. Struct., 23(3), 251-261. https://doi.org/10.12989/scs.2017.23.3.251.
  28. Chen, F., Jin, Z., Wang, E., Wang, L., Jiang, Y., Guo, P., Gao, X. and He, X. (2021), "Relationship model between surface strain of concrete and expansion force of reinforcement rust", Scientific Reports, 11(1), 1-11. https://doi.org/10.1038/s41598-021-83376-w.
  29. Chen, F., Zhong, Y., Gao, X., Jin, Z., Wang, E., Zhu, F., Shao, X. and He, X. (2021), "Non-uniform Model of Relationship Between Surface Strain and Rust Expansion Force of Reinforced Concrete".
  30. Chen, H., Song, H., Li, Y. and Safarpour, M. (2020), "Hygrothermal buckling analysis of polymer-CNT-fiber-laminated nanocomposite disk under uniform lateral pressure with the aid of GDQM", Eng. with Comput., 1-25. https://doi.org/10.1007/s00366-020-01102-y.
  31. Chen, Y., He, L., Guan, Y., Lu, H. and Li, J. (2017), "Life cycle assessment of greenhouse gas emissions and water-energy optimization for shale gas supply chain planning based on multi-level approach: Case study in Barnett, Marcellus, Fayetteville, and Haynesville shales", Energ. Convers. Management, 134, 382-398. https://doi.org/10.1016/j.enconman.2016.12.019.
  32. Chen, Y., Li, J., Lu, H. and Yan, P. (2021), "Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains", J. Cleaner Production, 278 123209. https://doi.org/10.1016/j.jclepro.2020.123209.
  33. Devaraj, A.F.S., Elhoseny, M., Dhanasekaran, S., Lydia, E.L. and Shankar, K. (2020), "Hybridization of firefly and Improved Multi-Objective Particle Swarm Optimization algorithm for energy efficient load balancing in Cloud Computing environments", J. Parallel Distr. Com., 142 36-45. https://doi.org/10.1016/j.jpdc.2020.03.022.
  34. Dorri, A., Kanhere, S.S. and Jurdak, R. (2019), "MOF-BC: A memory optimized and flexible blockchain for large scale networks", Future Gener. Comp. Syst., 92, 357-373. https://doi.org/10.1016/j.future.2018.10.002.
  35. Duan, Z., Yin, Q., Li, C., Dong, L., Bai, X., Zhang, Y., Yang, M., Jia, D., Li, R. and Liu, Z. (2020), "Milling force and surface morphology of 45 steel under different Al 2 O 3 nanofluid concentrations", Int. J. Adv. Manufact. Technol., 107(3), 1277-1296. https://doi.org/10.1007/s00170-020-04969-9.
  36. Dutta, A.K., Elhoseny, M., Dahiya, V. and Shankar, K. (2020), "An efficient hierarchical clustering protocol for multihop Internet of vehicles communication", T. Emerging Telecommunications Technologies, 31(5), e3690. https://doi.org/10.1002/ett.3690.
  37. Eassa, A.M., Elhoseny, M., El-Bakry, H.M. and Salama, A.S. (2018), "NoSQL injection attack detection in web applications using RESTful service", Program. Comput. Soft., 44(6), 435-444. https://doi.org/10.1134/S036176881901002X.
  38. Ebrahimi, F. and Dabbagh, A. (2019), "Vibration analysis of multi-scale hybrid nanocomposite plates based on a Halpin-Tsai homogenization model", Compos. Part B: Eng., 173,106955. https://doi.org/10.1016/j.compositesb.2019.106955.
  39. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus. 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  40. El-Hasnony, I.M., Barakat, S.I., Elhoseny, M. and Mostafa, R.R. (2020), "Improved feature selection model for big data analytics", IEEE Access, 8, 66989-67004. https://doi.org/10.1109/ACCESS.2020.2986232.
  41. Elhoseny, H., Elhoseny, M., Riad, A.M. and Hassanien, A.E. (2018). "A framework for big data analysis in smart cities", International conference on advanced machine learning technologies and applications.
  42. Elhoseny, M. (2020), "Intelligent firefly-based algorithm with Levy distribution (FF-L) for multicast routing in vehicular communications", Exp. Syst. Appl., 140, 112889. https://doi.org/10.1016/j.eswa.2019.112889.
  43. Elhoseny, M. (2020), "Multi-object detection and tracking (MODT) machine learning model for real-time video surveillance systems", Circuit. Syst. Signal Pr.. 39(2), 611-630. https://doi.org/10.1007/s00034-019-01234-7.
  44. Elhoseny, M., Bian, G.B., Lakshmanaprabu, S., Shankar, K., Singh, A.K. and Wu, W. (2019), "Effective features to classify ovarian cancer data in internet of medical things", Comput. Netw., 159, 147-156. https://doi.org/10.1016/j.comnet.2019.04.016
  45. Elhoseny, M. and Shankar, K. (2019), "Optimal bilateral filter and convolutional neural network based denoising method of medical image measurements", Measurement, 143, 125-135. https://doi.org/10.1016/j.measurement.2019.04.072.
  46. Elhoseny, M. and Shankar, K. (2019), "Reliable data transmission model for mobile ad hoc network using signcryption technique", IEEE T. Reliab., 69(3), 1077-1086. https://doi.org/10.1109/TR.2019.2915800.
  47. Elhoseny, M., Shankar, K. and Uthayakumar, J. (2019), "Intelligent diagnostic prediction and classification system for chronic kidney disease", Scientific Reports, 9(1), 1-14. https://doi.org/10.1038/s41598-019-46074-2.
  48. Elhoseny, M., Shehab, A. and Yuan, X. (2017), "Optimizing robot path in dynamic environments using genetic algorithm and bezier curve", J. Intel. Fuzzy Syst., 33(4), 2305-2316. https://doi.org/10.3233/JIFS-17348
  49. Elhoseny, M., Yuan, X., El-Minir, H.K. and Riad, A. (2014). "Extending self-organizing network availability using genetic algorithm", Proceedings of the 15th international conference on computing, communications and networking technologies (ICCCNT).
  50. Elsayed, W., Elhoseny, M., Sabbeh, S. and Riad, A. (2018), "Self-maintenance model for wireless sensor networks", Comput. Elec. Eng., 70, 799-812. https://doi.org/10.1016/j.compeleceng.2017.12.022.
  51. Emam, S. and Eltaher, M. (2016), "Buckling and postbuckling of composite beams in hygrothermal environments", Compos. Struct., 152, 665-675. https://doi.org/10.1016/j.compstruct.2016.05.029.
  52. Ewees, A.A., Abd El Aziz, M. and Elhoseny, M. (2017). "Social-spider optimization algorithm for improving ANFIS to predict biochar yield", Proceedings of the 2017 8th international conference on computing, communication and networking technologies (ICCCNT).
  53. Eyvazian, A., Hamouda, A.M., Tarlochan, F., Mohsenizadeh, S. and Dastjerdi, A.A. (2019), "Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform graphene platelet with magnetorheological fluid core", Steel Compos. Struct., 33(6), 891-906. https://doi.org/10.12989/scs.2019.33.6.891.
  54. Gaber, T., Abdelwahab, S., Elhoseny, M. and Hassanien, A.E. (2018), "Trust-based secure clustering in WSN-based intelligent transportation systems", Comput. Netw., 146, 151-158. https://doi.org/10.1016/j.comnet.2018.09.015.
  55. Geetha, K., Anitha, V., Elhoseny, M., Kathiresan, S., Shamsolmoali, P. and Selim, M.M. (2021), "An evolutionary lion optimization algorithm-based image compression technique for biomedical applications", Exp.Syst., 38(1), e12508. https://doi.org/10.1111/exsy.12508
  56. Guo, J., Gao, J., Xiao, C., Chen, L. and Qian, L. (2021), "Mechanochemical reactions of GaN-Al 2 O 3 interface at the nanoasperity contact: Roles of crystallographic polarity and ambient humidity", Friction, 1-14. https://doi.org/10.1007/s40544-021-0501-9.
  57. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struc., 1-22. https://doi.org/10.1080/15397734.2020.1779086.
  58. He, Z., Shi, X., Li, E. and Li, X. (2020), "Elastic properties and multi-scale design of long carbon fiber nonwoven reinforced plane-based isotropic composite", Compos. Struct., 251, 112657. https://doi.org/10.1016/j.compstruct.2020.112657
  59. Heydari, A. (2018), "Exact vibration and buckling analyses of arbitrary gradation of nano-higher order rectangular beam", Steel Compos. Struct., 28(5), 589-606. https://doi.org/10.12989/scs.2018.28.5.589.
  60. Hosseinabadi, A.A.R., Vahidi, J., Saemi, B., Sangaiah, A.K. and Elhoseny, M. (2019), "Extended genetic algorithm for solving open-shop scheduling problem", Soft Comput., 23(13), 5099-5116. https://doi.org/10.1007/s00500-018-3177-y.
  61. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. with Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  62. Hurrah, N.N., Parah, S.A., Loan, N.A., Sheikh, J.A., Elhoseny, M. and Muhammad, K. (2019), "Dual watermarking framework for privacy protection and content authentication of multimedia", Future Gener. Comp. Syst., 94, 654-673. https://doi.org/10.1016/j.future.2018.12.036.
  63. Jia, A., Liu, H., Ren, L., Yun, Y. and Tahouneh, V. (2020), "Influence of porosity distribution on vibration analysis of GPLs-reinforcement sectorial plate", Steel Compos. Struct., 35(1), 111-127. https://doi.org/10.12989/scs.2020.35.1.111.
  64. Jiang, D., Wang, F., Lv, Z., Mumtaz, S., Al-Rubaye, S., Tsourdos, A. and Dobre, O. (2021), "QoE-Aware Efficient Content Distribution Scheme for Satellite-Terrestrial Networks", IEEE Transactions on Mobile Computing.
  65. Jiang, G., Li, F. and Li, X. (2016), "Nonlinear vibration analysis of composite laminated trapezoidal plates", Steel Compos. Struct., 21(2), 395-409. https://doi.org/10.12989/scs.2016.21.2.395.
  66. Karimiasl, M., Ebrahimi, F. and Akgoz, B. (2019), "Buckling and post-buckling responses of smart doubly curved composite shallow shells embedded in SMA fiber under hygro-thermal loading", Compos. Struct., 223, 110988. https://doi.org/10.1016/j.compstruct.2019.110988.
  67. Kim, M., Park, Y.-B., Okoli, O.I. and Zhang, C. (2009), "Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites", Compos. Sci. Technol., 69(3-4), 335-342. https://doi.org/10.1016/j.compscitech.2008.10.019.
  68. Kolahdouzan, F., Arani, A.G. and Abdollahian, M. (2018), "Buckling and free vibration analysis of FG-CNTRC-micro sandwich plate", Steel Compos. Struct., 26(3), 273-287. https://doi.org/10.12989/scs.2018.26.3.273.
  69. Krishnaraj, N., Elhoseny, M., Lydia, E.L., Shankar, K. and ALDabbas, O. (2021), "An efficient radix trie-based semantic visual indexing model for large-scale image retrieval in cloud environment", Software: Pract. Exper., 51(3), 489-502. https://doi.org/10.1002/spe.2834.
  70. Krishnaraj, N., Elhoseny, M., Thenmozhi, M., Selim, M.M. and Shankar, K. (2020), "Deep learning model for real-time image compression in Internet of Underwater Things (IoUT)", J. Real-Time Image Process., 17(6), 2097-2111. https://doi.org/10.1007/s11554-019-00879-6.
  71. Lakshmanaprabu, S., Elhoseny, M. and Shankar, K. (2019), "Optimal tuning of decentralized fractional order PID controllers for TITO process using equivalent transfer function", Cognitive Syst. Res., 58, 292-303. https://doi.org/10.1016/j.cogsys.2019.07.005.
  72. Li, H., Pang, F., Du, Y. and Gao, C. (2019), "Free vibration analysis of uniform and stepped functionally graded circular cylindrical shells", Steel Compos. Struct., 33(2), 163-180. https://doi.org/10.12989/scs.2019.33.2.163.
  73. Li, X., Shi, T., Li, B., Chen, X., Zhang, C., Guo, Z. and Zhang, Q. (2019), "Subtractive manufacturing of stable hierarchical micro-nano structures on AA5052 sheet with enhanced water repellence and durable corrosion resistance", Mater. Design, 183, 108152. https://doi.org/10.1016/j.matdes.2019.108152.
  74. Li, X., Yu, P., Niu, X., Yamaguchi, H. and Li, D. (2020), "Noncontact manipulation of nonmagnetic materials by using a uniform magnetic field: Experiment and simulation", J. Magnetism and Magnetic Mater., 497, 165957. https://doi.org/10.1016/j.jmmm.2019.165957.
  75. Li, Y., Qiao, L. and Lv, Z. (2021), "An Optimized Byzantine Fault Tolerance Algorithm for Consortium Blockchain", Peer-to-Peer Networking and Applications, 1-14. https://doi.org/10.1007/s12083-021-01103-8.
  76. Libo, Z., Tian, H., Chunyun, G. and Elhoseny, M. (2019), "Realtime detection of cole diseases and insect pests in wireless sensor networks", J. Intel. Fuzzy Syst., 37(3), 3513-3524. https://doi.org/10.3233/JIFS-179155.
  77. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  78. Liu, J., Yi, Y. and Wang, X. (2020), "Exploring factors influencing construction waste reduction: A structural equation modeling approach", J. Cleaner Production, 276, 123185. https://doi.org/10.1016/j.jclepro.2020.123185.
  79. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. with Comput., 1-20.
  80. Lou, R., Lv, Z., Dang, S., Su, T. and Li, X. (2021), "Application of machine learning in ocean data", Multimedia Syst., 1-10. https://doi.org/10.1007/s00530-020-00733-x.
  81. Lou, R., Wang, W., Li, X., Zheng, Y. and Lv, Z. (2021), "Prediction of Ocean Wave Height Suitable for Ship Autopilot", IEEE T. Intel. Transp., 1-10. https://doi.org/10.1109/TITS.2021.3067040
  82. Lv, S. and Liu, Y. (2021), "PLVA: privacy-preserving and lightweight V2I authentication protocol", IEEE T. Intel. Transp., 1-7. https://doi.org/10.1109/TITS.2021.3059638.
  83. Lv, Z., Chen, D. and Li, J. (2021), "Novel System Design and Implementation for the Smart City Vertical Market", IEEE Commun. Mag., 59(4), 126-131. https://doi.org/10.1109/MCOM.001.2000945.
  84. Lv, Z., Chen, D., Lou, R. and Alazab, A. (2021), "Artificial intelligence for securing industrial-based cyber-physical systems", Future Gener. Comp. Sys., 117, 291-298. https://doi.org/10.1016/j.future.2020.12.001.
  85. Lv, Z., Lou, R., Li, J., Singh, A.K. and Song, H. (2021), "Big Data Analytics for 6G-Enabled Massive Internet of Things", IEEE Internet of Things J., 8(7), 5350-5359. https://doi.org/10.1109/JIOT.2021.3056128.
  86. Lydia, E.L., Raj, J.S., Pandi Selvam, R., Elhoseny, M. and Shankar, K. (2021), "Application of discrete transforms with selective coefficients for blind image watermarking", T. Emerg. Telecommun. Technologies, 32(2), e3771. https://doi.org/10.1002/ett.3771.
  87. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. with Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  88. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  89. Mercan, K., Ebrahimi, F. and Civalek, O. (2020), "Vibration of angle-ply laminated composite circular and annular plates", Steel Compos. Struct., 34(1), 141-154. https://doi.org/10.12989/scs.2020.34.1.141.
  90. Metawa, N., Elhoseny, M., Hassan, M.K. and Hassanien, A.E. (2016). "Loan portfolio optimization using genetic algorithm: a case of credit constraints", Proceedings of the 2016 12th international computer engineering conference (ICENCO).
  91. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(1), 2050010. https://doi.org/10.1142/S1758825120500106.
  92. Mohanty, S.N., Lydia, E.L., Elhoseny, M., Al Otaibi, M.M.G. and Shankar, K. (2020), "Deep learning with LSTM based distributed data mining model for energy efficient wireless sensor networks", Phys.Commun., 40, 101097. https://doi.org/10.1016/j.phycom.2020.101097.
  93. Muhammad, K., Khan, S., Elhoseny, M., Ahmed, S.H. and Baik, S.W. (2019), "Efficient fire detection for uncertain surveillance environment", IEEE T. Ind. Inform., 15(5), 3113-3122. https://doi.org/10.1109/TII.2019.2897594.
  94. Murugan, B., Elhoseny, M., Shankar, K. and Uthayakumar, J. (2019), "Region-based scalable smart system for anomaly detection in pedestrian walkways", Comput. Elec. Eng., 75, 146-160. https://doi.org/10.1016/j.compeleceng.2019.02.017.
  95. Ng, C., Zhao, Y. and Wei, G. (2004), "Comparison of discrete singular convolution and generalized differential quadrature for the vibration analysis of rectangular plates", Comput. Method. Appl. M., 193(23-26), 2483-2506. https://doi.org/10.1016/j.cma.2004.01.013.
  96. Nouri, K., Sulong, N.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38.
  97. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Sci. Reports, 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  98. Parand, A.A. and Alibeigloo, A. (2017), "Static and vibration analysis of sandwich cylindrical shell with functionally graded core and viscoelastic interface using DQM", Compos. Part B: Eng., 126, 1-16. https://doi.org/10.1016/j.compositesb.2017.05.071.
  99. Puri, V., Jha, S., Kumar, R., Priyadarshini, I., Abdel-Basset, M., Elhoseny, M. and Long, H.V. (2019), "A hybrid artificial intelligence and internet of things model for generation of renewable resource of energy", IEEE Access, 7, 111181-111191. https://doi.org/10.1109/ACCESS.2019.2934228.
  100. Rafiee, M., Liu, X., He, X. and Kitipornchai, S. (2014), "Geometrically nonlinear free vibration of shear deformable piezoelectric carbon nanotube/fiber/polymer multiscale laminated composite plates", J. Sound Vib., 333(14), 3236-3251. https://doi.org/10.1016/j.jsv.2014.02.033.
  101. Rafiee, M., Yang, J. and Kitipornchai, S. (2013), "Large amplitude vibration of carbon nanotube reinforced functionally graded composite beams with piezoelectric layers", Compos. Struct., 96, 716-725. https://doi.org/10.1016/j.compstruct.2012.10.005.
  102. Rahimi, A., Alibeigloo, A. and Safarpour, M. (2020), "Three-dimensional static and free vibration analysis of graphene platelet-reinforced porous composite cylindrical shell", J. Vib. Control, 1077546320902340. https://doi.org/10.1177/1077546320902340.
  103. Rahmani, M., Mohammadi, Y. and Kakavand, F. (2019), "Vibration analysis of sandwich truncated conical shells with porous FG face sheets in various thermal surroundings", Steel Compos. Struct., 32(2), 239-252. https://doi.org/10.12989/scs.2019.32.2.239.
  104. Rajaei, S., Shoaei, P., Shariati, M., Ameri, F., Musaeei, H.R., Behforouz, B. and de Brito, J. (2021), "Rubberized alkali-activated slag mortar reinforced with polypropylene fibres for application in lightweight thermal insulating materials", Constr. Build. Mater., 270, 121430. https://doi.org/10.1016/j.conbuildmat.2020.121430.
  105. Reddy, J., Wang, C. and Kitipornchai, S. (1999), "Axisymmetric bending of functionally graded circular and annular plates", Eur. J. Mech.-A/Solids, 18(2), 185-199. https://doi.org/10.1016/S0997-7538(99)80011-4.
  106. Reddy, J.N. (2003), Mechanics of laminated composite plates and shells: theory and analysis, CRC press.
  107. Rezaiee-Pajand, M., Masoodi, A.R. and Rajabzadeh-Safaei, N. (2019), "Nonlinear vibration analysis of carbon nanotube reinforced composite plane structures", Steel Compos. Struct., 30(6), 493-516. https://doi.org/10.12989/scs.2019.30.6.493.
  108. Rizk-Allah, R.M., Hassanien, A.E. and Elhoseny, M. (2018), "A multi-objective transportation model under neutrosophic environment", Comput. Elec. Eng., 69, 705-719. https://doi.org/10.1016/j.compeleceng.2018.02.024.
  109. Sadd, M.H. (2009), Elasticity: theory, applications, and numerics, Academic Press.
  110. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Stat. Mech. its Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  111. Safarpour, M. and Alibeigloo, A. (2021), "Elasticity solution for bending and Frequency Behavior of Sandwich Cylindrical Shell with FG-CNTRC Face-Sheets and polymer Core Under Initial Stresses", Int. J. Appl. Mech., 13(2), 2150020. https://doi.org/10.1142/S1758825121500204.
  112. Safarpour, M., Rahimi, A. and Alibeigloo, A. (2019), "Static and free vibration analysis of graphene platelets reinforced composite truncated conical shell, cylindrical shell, and annular plate using theory of elasticity and DQM", Mech. Based Des. Struc., 1-29. https://doi.org/10.1080/15397734.2019.1646137.
  113. Safarpour, M., Rahimi, A., Alibeigloo, A., Bisheh, H. and Forooghi, A. (2019), "Parametric study of three-dimensional bending and frequency of FG-GPLRC porous circular and annular plates on different boundary conditions", Mech. Based Des. Struc., 1-31.https://doi.org/10.1080/15397734.2019.1701491.
  114. Sahla, M., Saidi, H., Draiche, K., Bousahla, A.A., Bourada, F. and Tounsi, A. (2019), "Free vibration analysis of angle-ply laminated composite and soft core sandwich plates", Steel Compos. Struct., 33(5), 663-679. https://doi.org/10.12989/scs.2019.33.5.663.
  115. Salehipour, H., Shahgholian-Ghahfarokhi, D., Shahsavar, A., Civalek, O. and Edalati, M. (2020), "Static deflection and free vibration analysis of functionally graded and porous cylindrical micro/nano shells based on the three-dimensional elasticity and modified couple stress theories", Mech. Based Des. Struc., 1-22. https://doi.org/10.1080/15397734.2020.1775095.
  116. Saracevic, M., Adamovic, S., Macek, N., Elhoseny, M. and Sarhan, S. (2020), "Cryptographic keys exchange model for smart city applications", IET Intel. Transport Syst., 14(11), 1456-1464. https://doi.org/10.1049/iet-its.2019.0855
  117. Sekkal, M., Fahsi, B., Tounsi, A. and Mahmoud, S. (2017), "A novel and simple higher order shear deformation theory for stability and vibration of functionally graded sandwich plate", Steel Compos. Struct., 25(4), 389-401. https://doi.org/10.12989/scs.2017.25.4.389.
  118. Shaban, M. and Alibeigloo, A. (2020), "Global bending analysis of corrugated sandwich panels with integrated piezoelectric layers", J. Sandw. Struct. Mater., 22(4), 1055-1073. https://doi.org/10.1177/1099636218780172.
  119. Shankar, K. and Elhoseny, M. (2019), "Trust Based Cluster Head Election of Secure Message Transmission in MANET Using Multi Secure Protocol with TDES", J. UCS, 25(10), 1221-1239.
  120. Shankar, K., Elhoseny, M., Lakshmanaprabu, S., Ilayaraja, M., Vidhyavathi, R., Elsoud, M.A. and Alkhambashi, M. (2020), "Optimal feature level fusion based ANFIS classifier for brain MRI image classification", Concurrency Comput. Pract Exp., 32(1).
  121. Shariati, A., Ghabussi, A., Habibi, M., Safarpour, H., Safarpour, M., Tounsi, A. and Safa, M. (2020), "Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation", Thin-Wall. Struct., 154, 106840. https://doi.org/10.1016/j.tws.2020.106840.
  122. Shariati, M., Armaghani, D.J., Khandelwal, M., Zhou, J., Eyvaziyan, A. and Khorami, M. (2021), "Assessment of Longstanding Effects of Fly Ash and Silica Fume on the Compressive Strength of Concrete Using Extreme Learning Machine and Artificial Neural Network", J. Adv. Eng. Comput., 5(1), 50-75. http://dx.doi.org/10.25073/jaec.202151.308.
  123. Shen, H.S. (2009), "A comparison of buckling and postbuckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators", Compos. Struct., 91(3), 375-384. https://doi.org/10.1016/j.compstruct.2009.06.005.
  124. Sheng, D., Zhang, S., Yu, Z. and Zhang, J. (2013), "Assessing frost susceptibility of soils using PCHeave", Cold Regions Sci. Technol., 95, 27-38. https://doi.org/10.1016/j.coldregions.2013.08.003.
  125. Sobhy, M. and Zenkour, A.M. (2019), "Vibration analysis of functionally graded graphene platelet-reinforced composite doubly-curved shallow shells on elastic foundations", Steel Compos. Struct., 33(2), 195-208. https://doi.org/10.12989/scs.2019.33.2.195.
  126. Tahouneh, V. (2018), "3-D Vibration analysis of FGMWCNTs/Phenolic sandwich sectorial plates", Steel Compos. Struct., 26(5), 649-662. https://doi.org/10.12989/scs.2018.26.5.649.
  127. Tahouneh, V. and Eskandari-Jam, J. (2014), "A semi-analytical solution for 3-D dynamic analysis of thick continuously graded carbon nanotube-reinforced annular plates resting on a Two-parameter elastic foundation", Mech. Adv. Compos. Struct., 1(2), 113-130. https://doi.org/10.22075/macs.2014.286.
  128. Tahouneh, V. and Yas, M. (2014), "Influence of equivalent continuum model based on the Eshelby-Mori-Tanaka scheme on the vibrational response of elastically supported thick continuously graded carbon nanotube-reinforced annular plates", Polymer Compos., 35(8), 1644-1661. https://doi.org/10.1002/pc.22818.
  129. Tang, Y. and Elhoseny, M. (2019), "Computer network security evaluation simulation model based on neural network", J. Intel. Fuzzy Syst., 37(3), 3197-3204. https://doi.org/10.3233/JIFS-179121.
  130. Thakur, S., Singh, A.K., Ghrera, S.P. and Elhoseny, M. (2019), "Multi-layer security of medical data through watermarking and chaotic encryption for tele-health applications", Multimedia Tools Appl., 78(3), 3457-3470. https://doi.org/10.1007/s11042-018-6263-3.
  131. Tharwat, A., Mahdi, H., Elhoseny, M. and Hassanien, A.E. (2018), "Recognizing human activity in mobile crowdsensing environment using optimized k-NN algorithm", Exp. Syst. Appl., 107, 32-44. https://doi.org/10.1016/j.eswa.2018.04.017.
  132. Thostenson, E., Li, W., Wang, D., Ren, Z. and Chou, T. (2002), "Carbon nanotube/carbon fiber hybrid multiscale composites", J. Appl. Phys., 91(9), 6034-6037. https://doi.org/10.1063/1.1466880.
  133. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  134. Uthayakumar, J., Elhoseny, M. and Shankar, K. (2020), "Highly reliable and low-complexity image compression scheme using neighborhood correlation sequence algorithm in WSN", IEEE T. Reliab., 69(4), 1398-1423. https://doi.org/10.1109/TR.2020.2972567.
  135. Valayapalayam Kittusamy, S.R., Elhoseny, M. and Kathiresan, S. (2019), "An enhanced whale optimization algorithm for vehicular communication networks", Int. J. Commun. Syst., e3953. https://doi.org/10.1002/dac.3953.
  136. Van Do, V.N. and Lee, C.-H. (2020), "Static bending and free vibration analysis of multilayered composite cylindrical and spherical panels reinforced with graphene platelets by using isogeometric analysis method", Eng. Struct., 215, 110682. https://doi.org/10.1016/j.engstruct.2020.110682.
  137. Wang, H., Zhang, H., Dousti, R. and Safarpour, H. (2021), "Dynamic simulation of moderately thick annular system coupled with shape memory alloy and multi-phase nanocomposite face sheets", Eng. with Comput., 1-24. https://doi.org/10.1007/s00366-020-01246-x.
  138. Wang, L., Peng, Y., Xie, Y., Chen, B. and Du, Y. (2021), "A new iteration regularization method for dynamic load identification of stochastic structures", Mech. Syst. Signal Pr., 156, 107586. https://doi.org/10.1016/j.ymssp.2020.107586.
  139. Wei, G. (2001), "A new algorithm for solving some mechanical problems", Computer Method. Appl. M., 190(15-17), 2017-2030. https://doi.org/10.1016/S0045-7825(00)00219-X.
  140. Wei, G., Zhao, Y. and Xiang, Y. (2001), "The determination of natural frequencies of rectangular plates with mixed boundary conditions by discrete singular convolution", Int. J. Mech. Sci., 43(8), 1731-1746. https://doi.org/10.1016/S0020-7403(01)00021-2.
  141. Wu, H., Kitipornchai, S. and Yang, J. (2017), "Imperfection sensitivity of thermal post-buckling behaviour of functionally graded carbon nanotube-reinforced composite beams", Appl. Math. Model., 42, 735-752. https://doi.org/10.1016/j.apm.2016.10.045.
  142. Xu, X., Cao, D., Zhou, Y. and Gao, J. (2020), "Application of neural network algorithm in fault diagnosis of mechanical intelligence", Mech. Syst. Signal Pr., 141, 106625. https://doi.org/10.1016/j.ymssp.2020.106625.
  143. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2021), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Cleaner Production, 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  144. Yu, Z., Amin, S.U., Alhussein, M. and Lv, Z. (2021), "Research on Disease Prediction Based on Improved DeepFM and IoMT", IEEE Access, 9, 39043-39054. https://doi.org/10.1109/ACCESS.2021.3062687.
  145. Yuan, X., Li, D., Mohapatra, D. and Elhoseny, M. (2018), "Automatic removal of complex shadows from indoor videos using transfer learning and dynamic thresholding", Comput. Elec. Eng., 70, 813-825. https://doi.org/10.1016/j.compeleceng.2017.12.026.
  146. Zaher, M., Shehab, A., Elhoseny, M. and Farahat, F.F. (2020), "Unsupervised model for detecting plagiarism in internet-based handwritten Arabic documents", J. Organizational End User Comput. (JOEUC), 32(2), 42-66. https://doi.org/10.4018/joeuc.2020040103
  147. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  148. Zhang, J., Wang, M., Tang, Y., Ding, Q., Wang, C., Huang, X., Chen, D. and Yan, F. (2021), "Angular Velocity Measurement With Improved Scale Factor Based on a Wideband-Tunable Optoelectronic Oscillator", IEEE T. Instrum. Measurement, 70, 1-9. https://doi.org/10.1109/TIM.2021.3067183.
  149. Zhang, J., Wu, W., Li, C., Yang, M., Zhang, Y., Jia, D., Hou, Y., Li, R., Cao, H. and Ali, H.M. (2020), "Convective Heat Transfer Coefficient Model Under Nanofluid Minimum Quantity Lubrication Coupled with Cryogenic Air Grinding Ti-6Al-4V", Int. J. Precision Eng. Manufact.-Green Technol., 1-23. https://doi.org/10.1007/s40684-020-00268-6.
  150. Zhang, K., Huo, Q., Zhou, Y.Y., Wang, H.H., Li, G.P., Wang, Y.W. and Wang, Y.Y. (2019), "Textiles/metal-organic frameworks composites as flexible air filters for efficient particulate matter removal", ACS Appl. Mater. Interfaces, 11(19), 17368-17374. https://doi.org/10.1021/acsami.9b01734.
  151. Zhang, K., Yang, Z., Mao, X., Chen, X.L., Li, H.H. and Wang, Y.Y. (2020), "Multifunctional Textiles/Metal- Organic Frameworks Composites for Efficient Ultraviolet Radiation Blocking and Noise Reduction", ACS Appl. Mater. Interfaces, 12(49), 55316-55323. https://doi.org/10.1021/acsami.0c18147.
  152. Zhang, T., Wu, X., Shaheen, S.M., Rinklebe, J., Bolan, N.S., Ali, E.F., Li, G. and Tsang, D.C. (2021), "Effects of microorganism-mediated inoculants on humification processes and phosphorus dynamics during the aerobic composting of swine manure", J. Hazardous Mater., 416, 125738. https://doi.org/10.1016/j.jhazmat.2021.125738.
  153. Zhao, X., Chen, B., Li, Y., Zhu, W., Nkiegaing, F. and Shao, Y. (2020), "Forced vibration analysis of Timoshenko double-beam system under compressive axial load by means of Green's functions", J. Sound Vib., 464, 115001. https://doi.org/10.1016/j.jsv.2019.115001.
  154. Zhao, X., Zhu, W. and Li, Y. (2020), "Analytical solutions of nonlocal coupled thermoelastic forced vibrations of micro-/nano-beams by means of Green's functions", J. Sound Vib., 481, 115407. https://doi.org/10.1016/j.jsv.2020.115407.
  155. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. with Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  156. Zhenjing, D., Changhe, L., Zhang, Y., Lan, D., Xiufang, B., Min, Y., Dongzhou, J., Runze, L., Huajun, C. and Xuefeng, X. (2021), "Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication", Chinese J. Aeronaut., 34(6), 33-53. https://doi.org/10.1016/j.cja.2020.04.029.
  157. Zhou, M., Li, X., Wang, Y., Li, S., Ding, Y. and Nie, W. (2020), "6G Multi-source Information Fusion Based Indoor Positioning via Gaussian Kernel Density Estimation", IEEE Internet of Things J., https://doi.org/10.1109/JIOT.2020.3031639.
  158. Zhou, M., Li, Y., Tahir, M.J., Geng, X., Wang, Y. and He, W. (2021), "Integrated Statistical Test of Signal Distributions and Access Point Contributions for Wi-Fi Indoor Localization", IEEE T. Vehicular Technol. 5057-5070. https://doi.org/10.1109/TVT.2021.3076269.
  159. Zhou, M., Wang, Y., Liu, Y. and Tian, Z. (2019), "An information-theoretic view of WLAN localization error bound in GPS-denied environment", IEEE T. Vehicular Technol., 68(4), 4089-4093. https://doi.org/10.1109/TVT.2019.2896482.
  160. Zhu, H., An, Y., Shi, M., Li, Z., Chen, N., Yang, C. and Xiao, P. (2021), "Porous N-doped carbon/MnO2 nanoneedles for high performance ionic liquid-based supercapacitors", Mater. Lett., 296, 129837. https://doi.org/10.1016/j.matlet.2021.129837.