DOI QR코드

DOI QR Code

전개장치용 복합재료 테이프 스프링 개발

Development of Composite Tape-Springs for Deployable Structures

  • Kim, Yeong-Bae (Department of Mechanical Engineering, Jeonbuk National University) ;
  • Jung, Geunsung (Department of Mechanical Engineering, Jeonbuk National University) ;
  • Kim, Do-won (Department of Mechanical Engineering, Jeonbuk National University) ;
  • Choi, Han-Sol (Department of Mechanical Engineering, Jeonbuk National University) ;
  • Lim, Jae Hyuk (Department of Mechanical Engineering, Jeonbuk National University)
  • 투고 : 2021.06.22
  • 심사 : 2021.08.12
  • 발행 : 2021.09.03

초록

본 논문에서는 전개장치용 복합재료 테이프 스프링 개발을 위해 테이프 스프링의 설계, 해석, 제작 및 기계적 특성을 검토하였다. 이를 위해 다양한 복합재료 소재를 선정하고 3개의 적층 패턴에 따라 제작하여 굽힘 시 파손여부를 구조해석과 실험적으로 검토하였다. 이중 파손이 발생하지 않고 잘 굽혀지는 소재와 적층 패턴을 선정하였다. 이렇게 확보된 정보를 이용해 전개구조물용 테이프 스프링을 개발하고 4점 굽힘 시험을 통해 구조적인 특성을 검토하였다. 시험 결과로부터 굽힘과 펴짐에 따라 모멘트-회전 곡선에서 테이프 스프링 고유의 비선형 히스테리시스 현상이 적절히 구현됨을 확인하였다. 따라서 복합재료 테이프 스프링이 적절히 개발된 것을 확인하였다.

In this paper, development of tape-springs made of composite materials was conducted for the deployment structures along with design, analysis, fabrication, and numerical and experimental investigation of mechanical behavior of the tape-springs. To this end, the tape-springs were manufactured according to three stacking patterns, and numerical and experimental investigation were conducted to determine whether or not they were damaged during bending with various selected composite materials. Finally, optimal stacking patterns that do not cause damage were selected during bending. With this information, the four-point bending test was conducted to obtain the moment-rotation curves. From results, it was confirmed that the nonlinear hysteresis phenomenon of the tape-springs was properly realized according to folding and unfolding. Therefore, it was confirmed that the composite material tape spring was properly developed.

키워드

과제정보

본 연구는 2018년도 과학기술정보통신부의 재원으로 한국연구재단의 지원을 받아 수행된 것이며, 지원에 대해 진심으로 감사드립니다(NRF-2018M1A3A3A02065478).

참고문헌

  1. Shin, G.H., Chae, J.S., Lee, S.H., Min, K.W., Sohn, J.D., Jeong, W.S., and Moon, B.-G., "Operational Concept of the NEXTSat-1 for Science Mission and Space Core Technology Verification," Journal of Journal of Astronomy Space Sciences, Vol. 31, No. 1, 2014, pp. 67-72. https://doi.org/10.5140/JASS.2014.31.1.67
  2. Mallikarachchi, H.M.Y.C., Thin-Walled Composite Deployable Booms with Tape-Spring Hinges, Ph.D Thesis, Cambridge University, UK, 2011.
  3. Kim, D.Y., Choi, H.S., Lim, J.H., Kim, K.W., and Jeong, J.W., "Experimental and Numerical Investigation of Solar Panels Deployment with Tape Spring Hinges Having Nonlinear Hysteresis with Friction Compensation," Journal of Applied Sciences, Vol. 10, No. 21, 2020, pp. 7902. https://doi.org/10.3390/app10217902
  4. Wuest, V.W., "Einige anwendungen der theorie der zylinderschale," Journal of Applied Mathematicss, Vol. 34, No. 12, 1954, pp. 444-454.
  5. Mansfield, E.H., "Large-Deflexion Torsion and Flexure of Initially Curved Strips," Proceeding of the Royal Society of London, London, UK, 1973, pp. 279-298.
  6. Seffen, K.A., You, Z., and Pellegrino, S., "Folding and Deployment of Curved Tape Springs," Journal of Mechanical Sciences, Vol. 42, No. 10, 2000, pp. 2055-2073. https://doi.org/10.1016/S0020-7403(99)00056-9
  7. Seffen, K.A., "On the Behavior of Folded Tape-Springs," Journal of Applied Mechanics, Vol. 68, No. 3, 2001, pp. 369-375 https://doi.org/10.1115/1.1365153
  8. Bourgeois, S., Cochlin, B., Guinot, F., and Picault, E., "Buckling Analysis of Tape Springs Using a Rod Model with Flexible Cross-sections," Journal of Computational Mechanics, Vol. 21, No. 3-6, 2012, pp. 184-194 https://doi.org/10.1080/17797179.2012.714848
  9. Walker, S., and Aglietti, G., "Study of the Dynamics of Three Dimensional Tape Spring Folds," Journal of AIAA Journal, Vol. 42, No. 4, 2004, pp. 850-856. https://doi.org/10.2514/1.908
  10. Walker, S., and Aglietti, G., "Experimental Investigation of Tape Springs Folded in Three Dimensions," Journal of AIAA Journal, Vol. 44, No. 1, 2006, pp. 151-159. https://doi.org/10.2514/1.15508
  11. Yee, J.C. and Pellegrino, S., "Composite Tube Hinges," Journal of Aerospace Engineering, Vol. 18, No. 4, 2005, pp. 224-231. https://doi.org/10.1061/(ASCE)0893-1321(2005)18:4(224)
  12. Soykasap, O., "Deployment Analysis of a Self-deplyable Composite Boom," Journal of Composite Structures, Vol. 89, No. 3, 2009, pp. 374-381. https://doi.org/10.1016/j.compstruct.2008.08.012
  13. Mallikarachchi, H.M.Y.C., and Pellegrino, S., "Quasi-static Folding and Deployment of Ultrathin Composite Tape-spring Hinges," Journal of Spacecraft Rockets, Vol. 48, No. 1, 2011, pp. 187-198. https://doi.org/10.2514/1.47321
  14. Santer, M., "Actuated Bistable Jumping Structures," Journal of Applied Mechanics, Vol. 77, No. 3, 2010, pp. 031009. https://doi.org/10.1115/1.4000417
  15. Dewalque, F., Collette, J.P., and Bruls, O., "Mechanical behavior of Tape Springs Used in the Deployment of Reflectors Around a Solar Panel," Journal of Acta Astronautica, Vol. 123, 2016, pp. 271-282. https://doi.org/10.1016/j.actaastro.2016.03.029
  16. Fernandez, J.M., Rose, G., Stohlman, O.R., Younger, C.J., Dean, G.D., Warren, J.E., Kang, J.-H., Bryant, R.G., and Wilkie, K.W., "NASA's Advanced Solar Sail Propulsion System for Low-Cost Deep Space Exploration and Science Missions that Use High Performance Rollable Composite Booms," Proceeding of the 4th International Symposium on Solar Sailing, Kyoto, Japan, 2017.
  17. Ye, H., Zhang, Y., Yang, Q., Xiao, Y., Grandhi, R.V., Fischer, C.C., "Optimal Design of a Three Tape-spring Hinge Deployable Space Structure Using an Experimentally Validated Physics-based Model," Journal of Structural Multidisciplinary Optimization, Vol. 56, No. 5, 2017, pp. 973-989. https://doi.org/10.1007/s00158-017-1810-5
  18. Rahman, M., Ramakrishna, S., Prakash, J.R.S., and Tan, D.C.G., "Machinablity Study of Carbon Fiber Reinforced Composite," Journal of Materials Processing Technology, Vol. 89, 1999, pp. 292-297.
  19. Carlsson, L.A., Adams, D.F., Pipes, R.B., "Basic Experimental Characterization of Polymer Matrix Composite Materials," Journal of Polymer Reviews, Vol. 53, No. 2, 2013, pp. 277-302. https://doi.org/10.1080/15583724.2013.776588
  20. Seffen, K.A., Wang, B., and Guest, S. D., "Folded Orthotropic Tape-springs," Journal of the Mechanics Physics of Solids, Vol. 123, 2019, pp. 138-148. https://doi.org/10.1016/j.jmps.2018.09.017
  21. http://www.hcarbon.com
  22. http://www.skchemicals.com
  23. Renjin, J.B., and Sumathi, M., "Failure Analysis of FRP Composite Laminates Using Progressive Failure Criteria," Journal of Scientific & Engineering Research, Vol. 8, No. 6, 2017, pp. 1651-1662.
  24. Park, S.M., Kim, D.W., Jeong, G., Lim, J.H., and Kim, S.W., "Prediction and Calibration of Transverse Mechanical Properties of Unidirectional Composites with Random Fiber Arrangement Considering Interphase Effect," Journal of the Korean Society for Composite Research, Vol. 32, No. 5, 2019, pp. 270-278.
  25. Jeong, G., Lim, J.H., Choi, C., and Kim, S.W., "A Virtual Experimental Approach to Evaluate Transverse Damage Behavior of a Unidirectional Composite Considering Noncircular Fiber Cross-sections," Journal of Composite Structures, Vol. 228, 2019, pp. 111369. https://doi.org/10.1016/j.compstruct.2019.111369