Steel and Composite Structures

  • 제40권5호
  • /
  • Pages.709-722
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Predicting seismic performance of locally corroded steel box-section piers

  • Gao, Shengbin (College of Civil Engineering, Shanghai Normal University) ;
  • Pang, Yi (Department of Civil Engineering, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University) ;
  • Ge, Hanbin (Department of Civil Engineering, Meijo University)
  • 투고 : 2020.09.09
  • 심사 : 2021.07.14
  • 발행 : 2021.09.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper aims to propose a simplified method for predicting ultimate strength and ductility behavior of locally corroded steel box-section bridge piers. Firstly, the accuracy of the proposed 3-D elastoplastic finite element model for the steel piers subjected to a constant vertical load and cyclic lateral loading is verified by comparing the analytical results with test results. Then, a series of parametric study is carried out to investigate the effect of corrosion height ratio and corrosion thickness ratio of steel plates on the ultimate strength and ductility behavior of these piers. Finally, by establishing 2-D beam-column element models and comparing the calculation results with those of the 3-D models, correction coefficients for the ductility ratio and ultimate strength of 2-D beam-column element model under local corrosion are proposed. The research results indicate that there exists a most unfavorable corrosion height which makes the ductility ratio of steel piers the smallest. The ultimate strength of the steel piers will not have a distinct degradation when the corrosion height becomes larger than 0.5Ld. The correction coefficient formula for ductility ratio with respect to different aspect ratio of steel piers, and the linear relationship between correction strength coefficient and the corrosion thickness ratio are proposed. Correction coefficients for 2-D beam-column element model under the most unfavorable corrosion height are proven to have a rational accuracy, which provides a fast and simplified method to evaluate the ultimate strength and ductility behavior of such steel piers under local corrosion.

키워드

과제정보

The work described in this paper was financially supported by the grants from the National Natural Science Foundation of China (No. 51778361).

참고문헌

  1. Ahn, J.H., Choi, W.R., Jeon, S.H., Kim, S.H. and Kim, I.T. (2016a), "Residual compressive strength of inclined steel tubular members with local corrosion", Appl. Ocean Res., 59, 498-509. http://dx.doi.org/10.1016/j.apor.2016.07.002.
  2. Ahn, J.H., Jeon, S.H., Jeong, Y.S., Cho, K.I. and Huh, J.W. (2018b), "Evaluation of residual compressive strength and behavior of corrosion-damaged carbon steel tubular members", Materials, 11, 1254. http://dx.doi.org/10.3390/ma11071254.
  3. Biondini, F. and Frangopol, D.M. (2016), "Life-Cycle performance of deteriorating structural systems under uncertainty: Review", J. Struct. Eng., 142(9), F4016001. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001544.
  4. Chaboche, J.L. (1986), "Time-independent constitutive theories for cyclic plasticity", Int. J. Plasticity, 2(2), 149-188. http://dx.doi.org/10.1016/0749-6419(86)90010-0
  5. Gao, S., Peng, Z., Wang, X.D. and Liu, J.P. (2019), "Compressive behavior of circular hollow and concrete-filled steel tubular stub columns under atmospheric corrosion", Steel Compos. Struct., 33(4), 615-627. http://dx.doi.org/10.12989/scs.2019.33.4.615.
  6. Gao, S.B. and Ge, H.B. (2008), "Applicable range of steel constitutive models under cyclic load", China J. Highway Transport, 21(6), 69-75. http://dx.doi.org/10.19721/j.cnki.1001-7372.2008.06.012.
  7. Gao, S.B., Ikai T., Ni, J. and Ge, H.B. (2016a), "Load-carrying capacity degradation of reinforced concrete piers due to corrosion of wrapped steel plates", Steel Compos. Struct., 20(1), 91-106. http://dx.doi.org/10.12989/scs.2016.20.1.091.
  8. Gao, S.B., Ni, J., Zhang, D.X. and Ge, H.B. (2017b), "Strength degradation of reinforced concrete piers wrapped with steel plates under local corrosion", Steel Compos. Struct., 24(6), 753-765. https://doi.org/10.12989/scs.2017.24.6.753.
  9. Han, L.H., Hou, C. and Wang Q.L. (2012a), "Square concrete filled steel tubular (CFST) members under loading and chloride corrosion: Experiments", J. Constr. Steel Res., 71, 11-25. http://dx.doi.org/10.1016/j.jcsr.2011.11.012.
  10. Han, L.H., Hua, Y.X, Hou, C. and Wang, Q.L. (2017b), "Circular concrete-filled steel tubes subjected to coupled tension and chloride corrosion", J. Struct. Eng., 143(10), 04017134. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001874.
  11. Hou, C.C., Han, L.H., Wang, Q.L. and Hou, C. (2016), "Flexural behavior of circular concrete filled steel tubes (CFST) under sustained load and chloride corrosion", Thin-Wall. Struct., 107, 182-196. http://dx.doi.org/10.1016/j.tws.2016.02.020.
  12. Huang, Y., Zhang, Y., Liu. G. and Zhang, Q. (2010), "Ultimate strength assessment of hull structural plate with pitting corrosion damnification under biaxial compression", Ocean Eng., 37, 1503-1512. http://dx.doi.org/10.1016/j.oceaneng.2010.08.001.
  13. Karagah, H., Shi, C., Dawood, M. and Belarbi, A. (2015), "Experimental investigation of short steel columns with localized corrosion", Thin-Wall. Struct., 87, 191-199. http://dx.doi.org/10.1016/j.tws.2014.11.009.
  14. Nie, B., Xu S.H., Zhang H.J. and Zhang Z.X. (2020), "Experimental and numerical studies on the behaviour of corroded cold-formed steel columns", Steel Compos. Struct., 35(5), 611-625. http://dx.doi.org/10.12989/scs.2020.35.5.611.
  15. Ok, D., Pu Y.C. and Incecik, A. (2007), "Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression", Mar. Struct., 20, 100-114. http://dx.doi.org/10.1016/j.marstruc.2007.02.003.
  16. Qin, G.C., Lan, T., Qin, Q., Xu, S.H. and Zhang, Z.X. (2019), "Degradation model and evaluation criteria for the seismic behavior of corrosion H-section steel column", KSCE J. Civil Eng., 23(8), 3694-3705. http://dx.doi.org/10.1007/s12205-019-0153-8.
  17. Setvati. M.R. and Mustaffa, Z. (2019), "Rehabilitation of corroded circular hollow sectional steel beam by CFRP patch", Steel Compos. Struct., 32(1), 127-139. http://dx.doi.org/10.12989/scs.2019.32.1.127.
  18. Sharifi, Y., Tohidi, S. and Paik, J.K. (2016), "Ultimate compressive strength of deteriorated steel web plate with pitting and uniform corrosion wastage", Scientia Iranica, 23(2), 486-499. http://dx.doi.org/10.24200/SCI.2016.2133.
  19. Shi, C., Karagah, H., Dawood, M. and Belarbi, A. (2014), "Numerical investigation of H-shaped short steel piles with localized severe corrosion", Eng. Struct., 73, 114-124. http://dx.doi.org/10.1016/j.engstruct.2014.04.048.
  20. Shi, Y.J., Wang, M. and Wang, Y.Q. (2012), "Experimental study of structural steel constitutive relationship under cyclic loding", J. Build. Mater., 15(3), 293-300. http://dx.doi.org/10.3969/j.issn.1007-9629.20121.03.001.
  21. Usami. T., Gao S.B. and Ge, H.B. (2000), "Stiffened steel box columns. Part 2: Ductility evaluation", Earthq. Eng. Struct. D., 29, 1707-1722. http://dx.doi.org/10.1002/1096-9845(200011)29:11<1707::AID-EQE990>3.0.CO;2-7
  22. Wang, Y.D., Xu, S.H., Wang, H. and Li A.B. (2017), "Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology", Constr. Build. Mater., 152, 777-793. http://dx.doi.org/10.1016/j.conbuildmat.2017.07.035.
  23. Wang, Y.K, Wharton, J.A. and Shenoi, R.A. (2015), "Ultimate strength assessment of steel stiffened plate structures with grooving corrosion damage", Eng. Struct., 94, 29-42. http://dx.doi.org/10.1016/j.engstruct.2015.02.028.
  24. Xu, M.Y. and Gao, S.B. (2014), "Simplified numerical method determining ductility behavior of partially concrete-filled steel box-section bridge piers", J. Hebei Univ. Eng., 31(3), 9-14. http://dx.doi.org/10.3969/j.issn.1673-9469.2014.03.003.
  25. Xu, S.H., Zhang, Z.X., Su, C. and Qin, G.C. (2019), "Experimental study on seismic behavior of corroded H-shaped steel columns under neutral salt spray environment", J. Build. Struct., 40(1), 49-57. http://dx.doi.org/10.14006/j.jzjgxb.2019.01.005.
  26. Yang, Q.M. and Zhou J.H. (2016), "Research of mechanical properties of corroded steel plates based on tensile tests", Low Temp. Architect. Technol., 5, 12-15. http://dx.doi.org/10.13905/j.cnki.dwjz.2016.05.005.
  27. Zheng, S.S., Zhang, X.H. and Zhao, X.R. (2019), "Experimental investigation on seismic performance of corroded steel columns in offshore atmospheric environment", Struct. Des. Tall Spec. Build., 28, e1580. https://doi.org/10.1002/tal.1580.
  28. Zheng, Y., Usami, T. and Ge H.B. (2000), "Ductility of thin-walled steel box stub-columns", J. Struct. Eng., 126(11), 1304-1311. http://dx.doi.org/10.1061/(ASCE)0733-9445(2000)126:11(1304).