DOI QR코드

DOI QR Code

지진 재해 대응을 위한 진동 기반 구조적 관로 상태 감시 시스템에 대한 고찰

A review on vibration-based structural pipeline health monitoring method for seismic response

  • 신동협 (고려대학교 건축사회환경공학과) ;
  • 이정훈 (고려대학교 건축사회환경공학과) ;
  • 장용선 (고려대학교 건축사회환경공학과) ;
  • 정동휘 (고려대학교 건축사회환경공학과) ;
  • 박희등 (고려대학교 건축사회환경공학과) ;
  • 안창훈 (고려대학교 건축사회환경공학과) ;
  • 변역근 ((주)삼안 상하수도1부) ;
  • 김영준 ((주)삼안 상하수도1부)
  • Shin, Dong-Hyup (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Lee, Jeung-Hoon (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Jang, Yongsun (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Jung, Donghwi (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Park, Hee-Deung (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Ahn, Chang-Hoon (School of Civil, Environmental and Architectural Engineering, Korea University) ;
  • Byun, Yuck-Kun (Water supply & Sewerage Dept.1, Saman Corporation) ;
  • Kim, Young-Jun (Water supply & Sewerage Dept.1, Saman Corporation)
  • 투고 : 2021.07.20
  • 심사 : 2021.09.24
  • 발행 : 2021.10.15

초록

As the frequency of seismic disasters in Korea has increased rapidly since 2016, interest in systematic maintenance and crisis response technologies for structures has been increasing. A data-based leading management system of Lifeline facilities is important for rapid disaster response. In particular, the water supply network, one of the major Lifeline facilities, must be operated by a systematic maintenance and emergency response system for stable water supply. As one of the methods for this, the importance of the structural health monitoring(SHM) technology has emerged as the recent continuous development of sensor and signal processing technology. Among the various types of SHM, because all machines generate vibration, research and application on the efficiency of a vibration-based SHM are expanding. This paper reviews a vibration-based pipeline SHM system for seismic disaster response of water supply pipelines including types of vibration sensors, the current status of vibration signal processing technology and domestic major research on structural pipeline health monitoring, additionally with application plan for existing pipeline operation system.

키워드

과제정보

본 연구는 환경부의 재원으로 한국환경산업기술원의 환경시설 재난재해 대응기술개발사업(2019002850005)의 지원을 받아 수행되었습니다.

참고문헌

  1. A. Sanchez, J.P. and Hojjat, A. (2016). Signal processing techniques for vibration-based health monitoring of smart structures, Arch. Comput. Methods Eng., 23(1), 1-15. https://doi.org/10.1007/s11831-014-9135-7
  2. Alokita, S., Rahul, V., Jayakrishna, K., Kar, V.R., Rajesh, M., Thirumalini, S. and Manikandan, M. (2019). Recent advances and trends in structural health monitoring, Structural health monitoring of biocomposites, fibre-reinforced composites and hybrid composites. Woodhead Publishing Series in Composites Science and Engineering, 53-73.
  3. Avci, O., Abdeljaber, O., Kiranyaz, S., Hussein, M., Gabbouj, M. and Inman, D.J. (2021). A review of vibration-based damage detection in civil structures: From traditional methods to machine learning and deep learning applications, Mech. Syst. Signal Process., 147, 107077. https://doi.org/10.1016/j.ymssp.2020.107077
  4. Bao, C., Hao, H. and Li, Z. (2013). Vibration-based structural health monitoring of offshore pipelines: numerical and experimental study, Struct. Health Monit., 20(5), 769-788. https://doi.org/10.1002/stc.1494
  5. Bao, Y. and Li, H. (2020). Machine learning paradigm for structural health monitoring, Struct. Health Monit., 20(4), 1353-1372. https://doi.org/10.1177/1475921720972416
  6. Cawley, P. (2018). Structural health monitoring: Closing the gap between research and industrial deployment, Struct. Health Monit., 17(5), 1225-1244. https://doi.org/10.1177/1475921717750047
  7. Chae, Y.H., Kim, S.G., Kim, H., Kim, J.T. and Seong, P.H. (2020). A methodology for diagnosing FAC induced pipe thinning using accelerometers and deep learning models, Ann. Nucl. Energy, 143, 107501. https://doi.org/10.1016/j.anucene.2020.107501
  8. Circuitglobe. com. https://circuitglobe.com/seismic-transducer.html (March 03, 2021).
  9. Cho, C.W., Cho, S.T. and Yang, K.H. (2011). Study on characteristics of noncontact vibrating displacement sensor, J. Power Syst. Eng., 15(2), 13-18. https://doi.org/10.9726/kspse.2011.15.2.013
  10. Choi, K., Lee, H., Shin, G. and Hong, S. (2020). Analysis of Elastic Wave Based Leakage Detection Technology Using Accelerometers, J. Korea Inst. Inform. Commun. Eng., 24(9), 1231-1240. https://doi.org/10.6109/JKIICE.2020.24.9.1231
  11. Choi, Y.C., Park, J.H. and Yoon, D.B. (2008). Monitoring pipe thinning using two accelerometers, Korean Soc. Noise Vib. Eng., 18(12), 1286-1292. https://doi.org/10.5050/KSNVN.2008.18.12.1286
  12. Choi, Y.O., Kim, J.M., Ahn, B.H. and Choi, B.K. (2020). Feature analysis of acoustic emission and vibration signal according to pipe cracking shape and valve opening/closing, Korean Soc. Noise Vib. Eng., 30(1), 5-10. https://doi.org/10.5050/KSNVE.2020.30.1.005
  13. Dooley, B. and Lister, D. (2018). Flow-Accelerated Corrosion in Steam Generating Plants, PPEC, 20(4), 194-244.
  14. El-Zahab, S., Abdelkader, E.M. and Zayed, T. (2018). An accelerometer-based leak detection system, Mech. Syst. Signal Process., 108, 276-291. https://doi.org/10.1016/j.ymssp.2018.02.030
  15. Fassois, S.D. and Kopsaftopoulos, F.P. (2013). Statistical time series methods for vibration based structural health monitoring, New Trends Struct. Health Monit., 209-264.
  16. Gao, Y., Brennan, M.J., Joseph, P., Muggleton, J. and Hunaidi, O. (2005). On the selection of acoustic/vibration sensors for leak detection in plastic water pipes, J. Sound Vib., 283(3-5), 927-941. https://doi.org/10.1016/j.jsv.2004.05.004
  17. Goyal, D. and Pabla, B. (2016). The vibration monitoring methods and signal processing techniques for structural health monitoring: a review, Arch. Comput. Methods Eng., 23(4), 585-594. https://doi.org/10.1007/s11831-015-9145-0
  18. Gu, D.S., Kim, H.J., Jeong, H.E., Kim, H.E. and Choi, B.K. (2007). Structural vibration analysis caused by piping resonance, Korean Soc. Mech. Eng., 31(2), 190-196. https://doi.org/10.3795/KSME-A.2007.31.2.190
  19. Han, S.H., Hwang, J.M. and Lee, J.M. (2010). Estimation of the Pipe Thickness using the Variation of the Group Velocity, J. Korea Robot. Soc., 5(1), 32-40.
  20. Han, S.W. and Park, J.H. (2013). Monitoring of wall thinning of a pipe by measuring natural frequencies of shell vibration modes, Korean Soc. Noise Vib. Eng., 860-861.
  21. Han, S.W., Park, J.H., Kang, T. and Sohn, K.S. (2014). Development of portable vibration signal-based pipe wall thinning inspection device, Korean Soc. Noise Vib. Eng., 545-547.
  22. Industrial electronics. http://www.industrial-electronics.com/DAQ/industrial_electronics/input_devices_sensors_transducers_transmitters_measurement/Accelerometers.html (March 03, 2021).
  23. Ismail, M.I.M., Dziyauddin, R., Ahmad, N. and Ahmad, N. (2018). Vibration detection in water pipelines leakage using wireless three-axis accelerometer sensor, Int. J. Adv. Sci. Technol., 112, 137-150. https://doi.org/10.14257/ijast.2018.112.13
  24. Jazwinski, A.H. (2007). Stochastic processes and filtering theory. Courier Corporation.
  25. Jung, D. and Lansey, K. (2015). Water distribution system burst detection using a nonlinear Kalman filter, J. Water Resour. Plan. Manag., 141(5), 04014070. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000464
  26. Jung, S. (2019). Vibration-based Structural Health Monitoring using Machine Learning with Applications to Plate and Pipeline Structures, Ph.D., Seoul National University, Korea.
  27. K-water. (2019). Seismic risk assessment of water supply networks, 2020-WS-RR-28-61, 82.
  28. Kang, J., Park, Y.J., Lee, J., Wang, S.H. and Eom, D.S. (2017). Novel leakage detection by ensemble CNN-SVM and graph-based localization in water distribution systems, IEEE Trans. Ind. Electron., 65(5), 4279-4289. https://doi.org/10.1109/tie.2017.2764861
  29. Karamizadeh, S., Abdullah, S.M., Halimi, M., Shayan, J. and Javad Rajabi, M. (2014). "Advantage and drawback of support vector machine functionality", 2014 international conference on computer, communications, and control technology (I4CT), IEEE.
  30. Kawazu, S., Fujita, S. and Minagawa, K. (2013). "Fundamental Study on Health Monitoring for Pipe by Vibration Analysis", Pressure Vessels and Piping Conference, American Society of Mechanical Engineers.
  31. Kim, D.S. and Lee, J.S. (1999). Propagation and attenuation characteristics of various ground vibrations, J. Korean Soc. Civ. Eng., 19(3-5), 1021-1032.
  32. Kim, E.H., Park, J., Lee, Y.G., Kim, S. and Park, J.H. (2012). Prediction of short-term behavior of buried polyethylene pipe, J. Korean Soc. Water Wastewater, 26(6), 907-914. https://doi.org/10.11001/jksww.2012.26.6.907
  33. Kim, J. (2015). The Leak Signal Characteristics and the Leak Point Estimation of Water Pipe, Master's Thesis, The University of Seoul, Korea.
  34. Kim, J.H. K-water. (2016). Performance evaluation of non-destructive precision diagnosis and development planning of operation monitoring system for large-scale water supply pipelines, 11-1613000-001355-01.
  35. Kim, J.M., Ahn, B.H., Lee, J.M., Yu, H.T. and Choi, B.K. (2017). Feature analysis of vibration and acoustic emission according to pipe cracking and valve opening/closing, Korean Soc. Noise Vib. Eng., 27(7), 857-862. https://doi.org/10.5050/KSNVE.2017.27.7.857
  36. LeCun, Y., Bengio, Y. and Hinton, G. (2015). Deep learning, Nature, 521(7553), 436-444. https://doi.org/10.1038/nature14539
  37. Lee, J.Y. (2015). Variable short-time Fourier transform for vibration signals with transients, J. Vib. Control, 21(7), 1383-1397. https://doi.org/10.1177/1077546313499389
  38. Lee, S.G. (2007). About the theory and application of acoustic and noise vibration signal processing technology, Korean Soc. Noise Vib. Eng., 17(1): 9-15.
  39. Lee, S.H., Park, C.S. and Yoon, D.J. (2019). Empirical wave velocity estimation in a large diameter water supply pipeline for impact source localization, J. Korean Soc. Nondestruct. Test., 39(2), 100-108. https://doi.org/10.7779/jksnt.2019.39.2.100
  40. Lee, S.H., Park, C.S. and Yoon, D.J. (2020). Experimental verification of impact damage detection in long range buried water supply pipeline, J. Korean Soc. Nondestruct. Test., 40(4), 241-250. https://doi.org/10.7779/jksnt.2020.40.4.241
  41. Lee, S.J., Lee, S.J., Choi, I.S., Park, K.K., Kim, H.T. and Kim, K.T. (2011). Performance improvement of radar target classification using UWB measured signals, J. Electromagn. Eng. Sci., 22(10), 981-989.
  42. Lee, Y.S. and Yoon, D.J. (2014). Improved estimation of leak location of pipelines using frequency band variation, J. korean Soc. Nondestruc. Test., 34(1), 44-52. https://doi.org/10.7779/JKSNT.2014.34.1.44
  43. Li, Z., Gao, P., Zhao, D. and Liu, J. (2017). Fault diagnosis and location of the aero-engine hydraulic pipeline based on Kalman filter, AIME, 9(12), 1687814017742811. https://doi.org/10.1177/1687814017742811
  44. Liang, J. and Sun, S. (2000). Site effects on seismic behavior of pipelines: a review, J. Press. Vessel. Technol., 122(4), 469-475. https://doi.org/10.1115/1.1285974
  45. Liu, E., Wang, X., Zhao, W., Su, Z. and Chen, Q. (2020). Analysis and research on pipeline vibration of a natural gas compressor station and vibration reduction measures, Energy Fuel, 35(1), 479-492.
  46. Marmarokopos, K., Doukakis, D., Frantziskonis, G. and Avlonitis, M. (2018). Leak detection in plastic water supply pipes with a high signal-to-noise ratio accelerometer, Meas. Control, 51(1-2), 27-37. https://doi.org/10.1177/0020294018758526
  47. Martin, A. (2016). Acoustic Emissions and Response for Detection and Monitoring of Flow-accelerated Corrosion, Master's Thesis, University of New Brunswick.
  48. Martini, A., Rivola, A. and Troncossi, M. (2018). Autocorrelation analysis of vibro-acoustic signals measured in a test field for water leak detection, Appl. Sci., 8(12), 2450. https://doi.org/10.3390/app8122450
  49. Martini, A., Troncossi, M., Rivola, A. and Nascetti, D. (2014). Preliminary investigations on automatic detection of leaks in water distribution networks by means of vibration monitoring. Advances in condition monitoring of machinery in non-stationary operations, 535-544.
  50. Mitchell, J.S. (2007). From vibration measurements to condition-based maintenance, Sound and vibration, 41(1), 62-79.
  51. Mustapha, S., Braytee, A. and Ye, L. (2017). "Detection of surface cracking in steel pipes based on vibration data using a multi-class support vector machine classifier", Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, SPIE, Portland, USA.
  52. Okosun, F., Cahill, P., Hazra, B. and Pakrashi, V. (2019). Vibration-based leak detection and monitoring of water pipes using output-only piezoelectric sensors, Eur. Phys. J. Spec. Top., 228(7), 1659-1675. https://doi.org/10.1140/epjst/e2019-800150-6
  53. PAHO and WHO. (2002). Health in the Americas. PAHO.
  54. Pargen, S., Magerstaedt, M., Larink, D., Monster, T. and Rentmeister, N. (2016). "Pipeline Strain and Vibration Monitoring by Smart Materials", International Pipeline Conference, American Society of Mechanical Engineers, Calgary, Canada.
  55. Park, C.S., Lee, S.H. and Yoon, D.J. (2021). Enhancing impact localization from fluid-pipe coupled vibration under noisy environment, Appl. Sci, 11(9), 4197. https://doi.org/10.3390/app11094197
  56. Park, J., Choi, J.S., Kim, K., Yoon, Y. and Park, J.H. (2020). A review on recent advances in water and wastewater treatment facilities management for earthquake disaster response, J Korean Soc. Water Wastewater, 34(1), 9-21. https://doi.org/10.11001/jksww.2020.34.1.009
  57. Park, M.J. and Kim, Y. (2020). A basic study on structural health monitoring using the Kalman filter, J. Soc. Nav. Archit. Korea, 57(3), 175-181. https://doi.org/10.3744/SNAK.2020.57.3.175
  58. Park, S., Kwak, P., Lee, H. and Choi, C. (2017). Methodology of Displacement Detection for Water Supply Pipeline by IMU Sensors, Int. J. Appl. Eng. Res., 12(20), 9914-9918.
  59. Power-mi. https://power-mi.com/content/seismic-velocitytransducers (March 03, 2021).
  60. Qiao, S., Torkamani-Azar, M., Salama, P. and Yoshida, K. (2012). Stationary wavelet transform and higher order statistical analyses of intrafascicular nerve recordings, J. Neural Eng., 9(5), 056014. https://doi.org/10.1088/1741-2560/9/5/056014
  61. Rizzo, P. (2010). Water and wastewater pipe nondestructive evaluation and health monitoring: a review, Adv. Civ. Eng., 2010. 13
  62. Rossman (2000). Epanet 2. User's Manual, Water Supply and Water Resources Division National Risk Management Research Laboratory Cincinnati, OH, 45268:200.
  63. Scheffer, C. and Girdhar, P. (2004). Practical machinery vibration analysis and predictive maintenance. Elsevier.
  64. Sejdic, E., Djurovic, I. and Jiang, J. (2009). Time-frequency feature representation using energy concentration: An overview of recent advances, Digit. Signal Process., 19(1), 153-183. https://doi.org/10.1016/j.dsp.2007.12.004
  65. Shinozuka, M., Chou, P.H., Kim, S., Kim, H.R., Yoon, E., Mustafa, H., Karmakar, D. and Pul, S. (2010). "Nondestructive monitoring of a pipe network using a MEMS-based wireless network", SPIE, International Society for Optics and Photonics.
  66. Shinozuka, M., Lee, S., Kim, S. and Chou, P.H. (2011). "Lessons from two field tests on pipeline damage detection using acceleration measurement", Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2011, International Society for Optics and Photonics, San diego, USA.
  67. Spanos, P., Giaralis, A. and Politis, N. (2007). Time-frequency representation of earthquake accelerograms and inelastic structural response records using the adaptive chirplet decomposition and empirical mode decomposition, Soil Dyn. Earthq. Eng., 27(7), 675-689. https://doi.org/10.1016/j.soildyn.2006.11.007
  68. Suh, J.S. (2014). A study on the measurement of the pipeline displacement vibration using accelerometers, Korean Soc. Noise Vib. Eng., 24(6), 476-482. https://doi.org/10.5050/KSNVE.2014.24.6.476
  69. Toh, G. and Park, J. (2020). Review of vibration-based structural health monitoring using deep learning, Appl. Sci., 10(5), 1680. https://doi.org/10.3390/app10051680
  70. Tushar, C., Ralish, R., Rajesh, M., Manikandan, M., Rajapandi, R., Kar, V. and Jayakrishna, K. (2019). Maintenance and monitoring of composites, Structural Health Monitoring of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Elsevier, 129-151.
  71. Widodo, A. and Yang, B.S. (2007). Support vector machine in machine condition monitoring and fault diagnosis, Mech. Syst. Signal Process., 21(6), 2560-2574. https://doi.org/10.1016/j.ymssp.2006.12.007
  72. Wood, D. (1995). KYPipe reference manual, Civil Engineering Software Center, University of Kentucky, Lexington, KY, USA.
  73. Wu, M. and Smyth, A.W. (2007). Application of the unscented Kalman filter for real-time nonlinear structural system identification, Struct. Control Health Monit, 14(7), 971-990. https://doi.org/10.1002/stc.186
  74. Yoo, D.G., Jung, D., Kang, D., Kim, J.H. and Lansey, K. (2016). Seismic hazard assessment model for urban water supply networks, J. Water Res. Plann. Manag. 142(2), 04015055. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000584
  75. Yoo, D.G., Kang, D., Jun, H. and Kim, J.H. (2014). Rehabilitation priority determination of water pipes based on hydraulic importance, Water, 6(12), 3864-3887. https://doi.org/10.3390/w6123864
  76. Yun, C.B. and Min, J. (2011). Smart sensing, monitoring, and damage detection for civil infrastructures, KSCE J. Civ. Eng., 15(1), 1-14. https://doi.org/10.1007/s12205-011-0001-y
  77. Zhang, L., Lin, J., Liu, B., Zhang, Z., Yan, X. and Wei, M. (2019). A review on deep learning applications in prognostics and health management, Ieee Access, 7, 162415-162438. https://doi.org/10.1109/access.2019.2950985