DOI QR코드

DOI QR Code

씨앵커의 구성에 따른 수중 안정성에 관한 연구

As tudy on the underwater stability according to the composition of the sea anchor

  • 정정모 (부경대학교 저탄소해양생산기술연구소) ;
  • 김형석 (부경대학교 수산과학대학 해양생산시스템관리학부)
  • Jung-Mo, JUNG (Institute of Low-Carbon Marine Production Technology, Pukyong National University) ;
  • Hyung-Seok, KIM (Department of Marine Production System Management, Pukyong National University)
  • 투고 : 2022.10.17
  • 심사 : 2022.11.24
  • 발행 : 2022.11.30

초록

Sea anchor for fishery is commonly used in jigging fishery and purse seine. The study of sea anchor was studied for improvement of opening efficiency and drag by changing the type of shape and the diameter of vent. However, standard specification of sea anchor is not set and has not been studied for underwater stability. Therefore, this study aimed to improve underwater stability of sea anchor by changing a vent diameter and weight of sinker. The experiment was conducted in flume water tank. The experiment model of sea anchor was made from actual model of sea anchor which is used in fishery by similarity law. The model of sea anchor was designed to different types of vent diameter and weight of sinker in different current speed. The value of movement of side to side (X-axis), drag of sea anchor (Y-axis) and movement of up and down (Z-axis) was measured for 30 seconds. Each value of X, Y, Z-axis was analyzed through t-test and ANOVA analysis to verify that each value had a significant difference according to the difference compositions. There was correlation between the movement of X-axis and Z-axis. The drag of sea anchor was stronger as the current speed increased. However, the larger the vent diameter, the weaker the drag. From the result of the standard deviation, the movement of X-axis was inversely proportional to the vent diameter. However, movement of Z-axis was larger as the weight of sinker was the heaviest or lightest from the result of the standard deviation. These results suggest that the sea anchor should be combined with proper size of the vent diameter and the weight of sinker to improve the stability.

키워드

과제정보

이 논문은 부경대학교 자율창의학술연구비(2022년)에 의하여 연구되었음.

참고문헌

  1. An HC. 2000. Development and hydrodynamic characteristics of sea anchor for squid jigging vessel. Doctoral dissertation, Ph. D. thesis, Pukyong National University, Korea, 1-86.
  2. Hyun YK, Kim JK, Kwon BG and An HC. 1998. The relationship between resistance and shape of sea anchor used in squid jigging boats. Journal of the Korean Society of Fisheries and Ocean Technology 34, 359-365.
  3. Jung JM, Matsushita Y, Hirose M, Sakai T, Kawauchi Y and Yoda M. 2021. Catch difference of groundfishes between two survey trawl nets having differing headrope and groundrope configurations in the East China Sea. Fisheries Science 87, 263-270. https://doi.org/10.1007/s12562-021-01497-7.
  4. Jung JM, Matsushita Y and Kim S. 2022. Study on reducing towing drag by varing the shape and arrangement of floats and gears. Applied Sciences 12, 7606. https://doi.org/10.3390/app12157606.
  5. Korean Statistical Information Service (KOSIS). 2022. Korean statistical information service, fishery production survey. Retrieved form https://kosis.kr/statHtml/statHtml.do?orgId=101&tblId=DT_1EW0003&vw_cd=MT_ZTITLE&list_id=K2_7&scrId=&seqNo=&lang_mode=ko&obj_var_id=&itm_id=&conn_path=MT_ZTITLE&path=%252FstatisticsList%252FstatisticsListIndex.do. Accessed 15 Aug 2022.
  6. Kim N, Kim HS, Lee YW and Ryu KJ. 2022. A study on standardization through the analysis of the survey on the use of fishery sea anchor. Journal of the Korean Society of Fisheries and Ocean Technolgy 58, 10-18. https://doi.org/10.3796/KSFOT.2022.58.1.010.
  7. Kim S, Lee D, Lim J and Park S. 2015. Model test on the net mouth shape of a gape net according to current speeds in Jindo area, Korea. Journal of the Korean Society of Fisheries and Ocean Technology 51, 145-153. https://doi.org/10.3796/KSFT.2015.51.1.146.
  8. Lee JH, Yoo JB, Lee CW, Kwon BG and Kim JM. 2003. Development for fishing gear and method of the non-float modwater pair trawl net (I) - Opening efficiency of model net according to the length of lower warp. Journal of the Korean Society of Fisheries and Ocean Technolgy 39, 33-43. https://doi.org/10.3796/ksft.2003.39.1.033.
  9. Lee MK and Lee CW. 2004. Dynamic analysis a cage affected by the current. Journal of the Korean Society of Fisheries and Ocean Technolgy 40, 214-224. https://doi.org/10.3796/KSFOT.2004.40.3.214.
  10. National Fisheries Research and Development Institute (NFRDI). 1997. Improvement of sea anchor and mechanization of sea anchor operating system. Korea, 1-208.
  11. Nomura M, Mori K, Tahara Y and Osaku Y. 1967. Underwater drag of sea anchor. Bulletin of Tokai Regional Fisheries Research Laboratory 52, 49-74 (In Japanese).
  12. Park JY, Kim N, Rhee KP, Yoon HK, Kim C, Jung C, Ahn K and Lee S. 2015. Study on coning motion test for submerged body. Journal of Ocean Enginnering and Technology 29, 436-444. https://doi.org/10.5574/KSOE.2015.29.6.436.
  13. Ro KD, Kwon BG and An HC. 1997. Fluid dynamic computation for sea anchor. Transactions of the Korean Society of Mechanical Engineers B, 463-468.
  14. Ro KD, Kwon BG and An HC. 1998. Numerical analysis for flowfield of a circular arc type sea anchor by discrete vortex method. Transactions of the Korean Society of Mechanical Enginners B, 1041-1051. https://doi.org/10.22634/KSME-B.1998.22.8.1041.
  15. Tauti M. 1934. A relation between experiments on model and on full scale of fishing net. Nippon Suisan Gakkaishi 3, 171-177. https://doi.org/10.2331/suisan.3.171.
  16. Yae YH and Lee BG. 1993. A model experiment on the basic efficiency of midwater rope trawl net. Journal of the Korean Society of Fisheries and Ocean Technology 29, 200-213.
  17. Zou B, Zhou C, Xu L, Wan R, Hu F and Guo S. 2022. Scale effect of applying Tauti's law in model experiment: CFD models for flow across planar netting. Ocean Engineering 256, 111552. https://doi.org/10.1016/j.oceaneng.2022.111552