DOI QR코드

DOI QR Code

Reliability based seismic fragility analysis of bridge

  • Kia, M. (Department of Civil Engineering, University of Science and Technology of Mazandaran) ;
  • Bayat, M. (Department of Civil and Environmental Engineering, Univrsity of South Carolina) ;
  • Emadi, A. (Department of Civil Engineering, Pajoohesh Consulting Engineers) ;
  • Kutanaei, S. Soleimani (Department of Civil Engineering, Islamic Azad University, Ayatollah Amoli Branch) ;
  • Ahmadi, H.R (Department of Civil Engineering, Faculty of Engineering, University of Maragheh)
  • 투고 : 2020.05.15
  • 심사 : 2022.01.21
  • 발행 : 2022.01.25

초록

In this paper, a reliability-based approach has been implemented to develop seismic analytical fragility curves of highway bridges. A typical bridge class of the Central and South-eastern United States (CSUS) region was selected. Detailed finite element modelling is presented and Incremental Dynamic Analysis (IDA) is used to capture the behavior of the bridge from linear to nonlinear behavior. Bayesian linear regression method is used to define the demand model. A reliability approach is implemented to generate the analytical fragility curves and the proposed approach is compared with the conventional fragility analysis procedure.

키워드

참고문헌

  1. Agency, F.E.M. (2009), Quantification of Building Seismic Performance Factors, FEMA P695, Washington, USA.
  2. Akcay, B., Sengul, C. and ali Tasdemir, M. (2016), "Fracture behavior and pore structure of concrete with metakaolin", Adv. Concrete Constr., 4(2), 71-88. https://doi.org/10.12989/acc.2016.4.2.071.
  3. Amini, A., Kia, M. and Bayat, M. (2021), "Seismic vulnerability macrozonation map of SMRFs located in Tehran via reliability framework", Struct. Eng. Mech., 78(3), 351-368. https://doi.org/10.12989/sem.2021.78.3.351
  4. Banerjee, S. and Shinozuka, M. (2008), "Mechanistic quantification of RC bridge damage states under earthquake through fragility analysis", Prob. Eng. Mech., 23, 12-22. https://doi.org/10.1016/j.probengmech.2007.08.001.
  5. Basoz, N.I. and Kiremidjian, A.S. (1998), "Evaluation of bridge damage data from the Loma Prieta and Northridge", California Earthq., 167.
  6. Bayat, M. and Bayat, M. (2014), "Seismic behavior of special moment-resisting frames with energy dissipating devices under near source ground motions", Steel Compos. Struct., 16(5), 533-557. https://doi.org/10.12989/scs.2014.16.5.533.
  7. Bayat, M., Daneshjoo, F. and Nistico, N. (2015), "Probabilistic sensitivity analysis of multi-span highway bridges", Steel Compos. Struct., 19(1), 237-262. http://doi.org/10.12989/scs.2015.19.1.237.
  8. Bayat, M., Daneshjoo, F. and Nistico, N. (2017), "The effect of different intensity measures and earthquake directions on the seismic assessment of skewed highway bridges", Earthq. Eng. Eng. Vib., 16(1), 165-179. https://doi.org/10.1007/s11803-017-0375-z.
  9. Bayat, M., Kia, M., Soltangharaei, V., Ahmadi, H.R. and Ziehl, P. (2020), "Bayesian demand model based seismic vulnerability assessment of a concrete girder bridge", Adv. Concrete Constr., 9(4), 337-343. https://doi.org/10.12989/acc.2020.9.4.337.
  10. Bayat, M., Kia, M., Soltangharaei, V., Ahmadi, H.R. and Ziehl, P. (2020), "Bayesian demand model based seismic vulnerability assessment of a concrete girder bridge", Adv. Concrete Constr., 9(4), 337-343. https://doi.org/10.12989/acc.2020.9.4.337.
  11. Bayat, M., Pakar, I. and Bayat, M. (2013), "On the large amplitude free vibrations of axially loaded Euler-Bernoulli beams", Steel Compos. Struct., 14(1), 73-83. https://doi.org/10.12989/scs.2013.14.1.073.
  12. Bayat, M., Pakar, I. and Emadi, A. (2013), "Vibration of electrostatically actuated microbeam by means of homotopy perturbation method", Struct. Eng. Mech., 48(6), 823-831. https://doi.org/10.12989/sem.2013.48.6.823.
  13. Bohl, A. (2009), "Comparison of performance based engineering approaches", Ph.D. Dissertation of Philosophy, University of British Columbia. https://doi.org/10.14288/1.0063147.
  14. Box, G.E. and Tiao, G.C. (2011), Bayesian Inference in Statistical Analysis, John Wiley and Sons.
  15. Caltrans, B.D.S. (1990), "California department of transportation", Sacramento.
  16. Choi, E. (2002), Seismic Analysis and Retrofit of Mid-America Bridges, Georgia Institute of Technology.
  17. Choi, E., DesRoches, R. and Nielson, B. (2004), "Seismic fragility of typical bridges in moderate seismic zones", Eng. Struct., 26(2), 187-199. https://doi.org/10.1016/j.engstruct.2003.09.006.
  18. Cimerallo, G.P., Reinhorn, A.M. and Bruneau, M. (2010), "Framework for analytical quantification of disaster resilience", Eng. Struct., 32(11), 3639-3649. https://doi.org/10.1016/j.engstruct.2010.08.008.
  19. Deepu, S.P., Prajapat, K. and Ray-Chaudhuri, S. (2014), "Seismic vulnerability of skew bridges under bidirectional ground motions", Eng. Struct., 71(9), 150-160. https://doi.org/10.1016/j.engstruct.2014.04.013.
  20. Ditlevsen, O. and Madsen, H.O. (1996), Structural Reliability Methods, Wiley New York.
  21. Fang, F., Zhang, J. and Zhang, K. (2013), "Analysis of effective flange width of small radius curved bridge with single box and double chamber", J. Hefei Univ. Tech. Nat. Sci., 10(9), 1088-1092.
  22. Federal Emergency Management Agency (1999), "Multi-hazard loss estimation methodology", Earthquake Model HAZUS99 User's Manual, Washington, USA.
  23. FEMA (2003), HAZUS-MH MR1: Technical Manual, Federal Emergency Management Agency Washington, USA.
  24. Gardoni, P., Der Kiureghian, A. and Mosalam, K.M. (2002), "Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations", J. Eng. Mech., 128(10), 1024-1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024).
  25. Haldar, A. and Mahadevan, S. (2000), Probability, Reliability, and Statistical Methods in Engineering Design, John Wiley and Sons.
  26. Han, J. and Wu, H.R. (2016), "A new transfer matrix method for curved beams and comparison study", Res. Explor. Lab., 35(12), 18-21.
  27. Haukaas, T. (2008), "Unified reliability and design optimization for earthquake engineering", Prob. Eng. Mech., 23(4), 471-481. https://doi.org/10.1016/j.probengmech.2007.10.008.
  28. Hwang, H., Liu, J.B. and Chiu, Y.H. (2001), "Seismic fragility analysis of highway bridges", Mid-America Earthquake Center CD Release, 1-6. https://doi.org/10.1177/87552930211052573.
  29. Karanth, S.S., Ghorpade, V.G. and Rao, H.S. (2017), "Shear and impact strength of waste plastic fibre reinforced concrete", Adv. Concrete Constr., 5(2), 173-182. https://doi.org/10.12989/acc.2017.5.2.173.
  30. Kia, M. and Banazadeh, M. (2016), "Closed-form fragility analysis of the steel moment resisting frames", Steel Compos. Struct., 21(1), 93-107. https://doi.org/10.12989/scs.2016.21.1.093.
  31. Kia, M. and Banazadeh, M. (2017), "Probabilistic seismic hazard analysis using reliability methods", Sci. Iran. Transac. A Civil Eng., 24(3), 933. https://doi.org/10.24200/sci.2017.4077.
  32. Kia, M., Amini, A., Bayat, M. and Ziehl, P. (2021), "Probabilistic seismic demand analysis of structures using reliability approaches", J. Earthq. Tsunami, 15(03), 2150011. https://doi.org/10.1142/S1793431121500111.
  33. Kiureghian, A.D. and Ditlevsen, O. (2009), "Aleatory or epistemic? Does it matter?", Struct. Saf., 31(2), 105-112. https://doi.org/10.1016/j.strusafe.2008.06.020.
  34. Koduru, S. and T. Haukaas (2009), "Probabilistic seismic loss assessment of a Vancouver high-rise building", J. Struct. Eng., 136(3), 235-245. 10.1061/(ASCE)ST.1943-541X.0000099.
  35. Kumar, S., Pandey, S.R. and Srivastava, A.K.L. (2013), "Analytical methods for determination of double-K fracture parameters of concrete", Adv. Concrete Constr., 1(4), 319-340. https://doi.org/10.12989/acc2013.1.4.319.
  36. Mackie, K.R., Wong, J.M. and Stojadinovic, B. (2010), "Post- earthquake bridge repair cost and repair time estimation methodology", Earthq. Eng. Struct. Dyn., 39(3), 281-301. https://doi.org/10.1002/eqe.942.
  37. Mahsuli, M. and T. Haukaas (2013), "Seismic risk analysis with reliability methods, part II: Analysis", Struct. Saf., 42, 63-74. https://doi.org/10.1016/j.strusafe.2013.01.004.
  38. Mander, J.B. and Basoz, N. (1999), "Seismic fragility curve theory for highway bridges", Optimizing Post-Earthquake Lifeline System Reliability, 31-40.
  39. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction (Civil Engineering), Wiley.
  40. Mirfakhraei, S.F., Ahmadi, H.R. and Chan, R. (2020), "Numerical and experimental research on actuator forces in toggled active vibration control system (Part I: Numerical)", Smart Struct. Syst., 25(2), 229-240. https://doi.org/10.12989/sss.2020.25.2.229.
  41. Billah, A.M. and Alam, M.S. (2015), "Seismic fragility assessment of concrete bridge pier reinforced with superelastic shape memory alloy", Earthq. Spectra, 31(3), 1515-1541. https://doi.org/10.1117/12.919866.
  42. Nielson, B.G. (2005), Analytical Fragility Curves for Highway Bridges in Moderate Seismic Zones, Georgia Institute of Technology.
  43. Padgett, J.E, Dennemann, K. and Ghosh, J. (2010), "Risk-based seismic life-cycle cost- benefit (LCC-B) analysis for bridge retrofit assessment", Struct. Saf., 32(3), 165-173. https://doi.org/10.1016/j.strusafe.2009.10.003.
  44. Pan, Y., Agrawal, A.K., Ghosn, M. and Alampalli, S. (2010), "Seismic fragility of multispan simply supported steel highway bridges in New York State II: Fragility analysis, fragility curves, and fragility surfaces", J. Bridge Eng., 15(5), 462-472. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000055.
  45. Parghi, A. and Alam, M.S. (2017), "Seismic collapse assessment of non-seismically designed circular RC bridge piers retrofitted with FRP composites", Compos. Struct., 160, 901-916. https://doi.org/10.1016/j.compstruct.2016.10.094.
  46. Ramanathan, K.N. (2012), Next Generation Seismic Fragility Curves for California Bridges Incorporating the Evolution in Seismic Design Philosophy, Georgia Institute of Technology.
  47. Rix, G. and Fernandez-Leon, J. (2004), "Synthetic ground motions for Memphis", TN.
  48. Sarokolayi, L.K., Beitollahi, A., Abdollahzadeh, G., Amreie, S.T.R. and Kutanaei, S.S. (2015), "Modeling of ground motion rotational components for near-fault and far-fault earthquake according to soil type", Arab. J. Geosci., 8(6), 3785-3797. https://doi.org/10.1007/s12517-014-1409-8.
  49. Shinozuka, M., Feng, M.Q., Kim, H.K. and Kim, S.H. (2000a), "Nonlinear static procedure for fragility curve development", J. Eng. Mech., 126(12), 1287-1295. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1287).
  50. Shinozuka, M., Feng, M.Q., Lee, J. and Naganuma, T. (2000b), "Statistical analysis of fragility curves", J. Eng. Mech., 126(12), 1224-1231. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1224).
  51. Sumathi, A. and Vignesh, A.S. (2017), "Study on behavior of RCC beams with externally bonded FRP members in flexure", Adv. Concrete Constr., 5(6), 625-638. https://doi.org/10.12989/acc.2017.5.6.625.
  52. Tavakoli, H., Kutanaei, S.S. and Hosseini, S.H. (2019), "Assessment of seismic amplification factor of excavation with support system", Earthq. Eng. Eng. Vib., 18(3), 555-566. https://doi.org/10.1007/s11803-019-0521-x.
  53. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  54. Wen, Y. (2004), "Probabilistic aspects of earthquake engineering", Earthquake Engineering from Engineering Seismology to Performance-Based Engineering.
  55. Wright, T., DesRoches, R. and Padgett, J.E. (2011), "Bridge seismic retrofitting practices in the central and Southeastern United States", J. Bridge Eng., 16(1), 82-92. https://doi.org/10.1061/ASCEBE.1943-5592.0000128.
  56. Xiao, N.C., H.Z. Huang, Z., Wang, Pang, Y. and He, L. (2011), "Reliability sensitivity analysis for structural systems in interval probability form", Struct. Multidiscipl. Optim., 44(5), 691-705. https://doi.org/10.1007/s00158-011-0652-9.
  57. Yamazaki, F., Motomura, H. and Hamada, T. (2000), "Damage assessment of expressway networks in Japan based on seismic monitoring", Proceedings of the 12th World Conference on Earthquake Engineering.
  58. Yi, J.H., Kim, S.H. and Kushiyama, S. (2007), "PDF interpolation technique for seismic fragility analysis of bridges", Eng. Struct., 29(7), 1312-1322. https://doi.org/10.1007/s00158-011-0652-9.