Journal of the Korean Society for Heat Treatment (열처리공학회지)

The Korean Society for Heat Treatment (한국열처리공학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Zr-7Si-xSn Alloys for Biomedical Implant Materials

생체의료용 임플란트 소재를 위한 Zr-7Si-xSn 합금설계

  • Kim, Minsuk (Department of Advanced Materials Engineering, Chosun University) ;
  • Kim, Chungseok (Department of Materials Science and Engineering, Chosun University)
  • 김민석 (조선대학교 첨단소재공학과) ;
  • 김정석 (조선대학교 신소재공학과)
  • Received : 2022.01.14
  • Accepted : 2022.01.20
  • Published : 2022.01.30
Download PDF
⟨ Previous Next ⟩

Abstract

The metallic implant materials are widely used in biomedical industries due to their specific mechanical strenth, corrosion registance, and superior biocompatability. These metallic materials, however, suffer from the stress-shielding effect and the generation of artifacts in the magnetic resonance imaging exam. In the present study, we develope a Zr-based alloys for the biomedical implant materials with low elastic modulus and low magnetic susceptibility. The Zr-7Si-xSn alloys were fabricated by an arc melting process. The elastic modulus was 24~31 GPa of the zirconium-based alloy. The average magnetic susceptibility value of the Zr-7Si-xSn alloy was 1.25 × 10-8cm3g-1. The average Icorr value of the Zr-7Si-xSn alloy was 0.2 ㎂/cm2. The Sn added zirconium alloy, Zr-7Si-xSn, is very interested and attractive as a biomaterial that reduces the stress-shielding effect caused by the difference of elastic modulus between human bone and metallic implant.

Keywords

Acknowledgement

"이 논문은 2021년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(No. 2020R1I1A3A0403690312)".

References

  1. K. Miura, N. Yamada, S. Hanada, T.-K. Jung, and E. Itoi : Acta Biomater., 7 (2011) 2320-2326. https://doi.org/10.1016/j.actbio.2011.02.008
  2. G. R. Parr, L. K. Gardner, and R. W. Toth : J. Prosthetic Dent., 54 (1985) 410-414. https://doi.org/10.1016/0022-3913(85)90562-1
  3. T. Hanawa : Mater. Sci. Eng. C, 24 (2004) 745-752. https://doi.org/10.1016/j.msec.2004.08.018
  4. Okazaki and E. Gotoh : Biomater., 26 (2005) 11-21. https://doi.org/10.1016/j.biomaterials.2004.02.005
  5. K. Aniolek and M. Kupka : Mater. Chem. Phys., 171 (2016) 374-378. https://doi.org/10.1016/j.matchemphys.2016.01.031
  6. M. Abdel-Hady Gepreel, and M. Niinomi : J. Mech. Behav. Biomed. Mater., 20 (2013) 407-415. https://doi.org/10.1016/j.jmbbm.2012.11.014
  7. X. M. Ma and W. Sun : J. Alloys Compd., 509 (2011) S294-S298. https://doi.org/10.1016/j.jallcom.2011.01.084
  8. J. Y. Hwang, D. J. Lee, K. K Lee, K. L. Yoon, and C. G Jun : J. Korean Soc. Heat Treatment, 18 (2005) 91-98.
  9. F. Duttenhoefer, M. E. Mertens, J. Vizkelety, F. Gremse, V. A. Stadelmann, and S. Sauerbier : Clin. Oral Implants Res., 26 (2015) 1195-1202. https://doi.org/10.1111/clr.12430
  10. M. Sancho-Puchades, C. H. F. Hammerle, and G. I. Benic : Clin. Oral Implants Res., 26 (2015) 1222-1228. https://doi.org/10.1111/clr.12438
  11. J. Olsrud, J. Latt, S. Brockstedt, B. Romner, and I. Bjorkman-Burtscher : J. Magn. Reson. Imaging, 22 (2005) 433-437. https://doi.org/10.1002/jmri.20391
  12. H. D. Kocasarac, G. Ustaoglu, S. Bayrak, R. Katkar, H. Geha, and M. Noujeim : Oral Surg. Oral Med. Oral Pathol. Oral Radiol., 128 (2019) e161-e162.
  13. T. Ernstberger, G. Heidrich, T. Bruening, S. Krefft, G. Buchhorn, and H. M. Klinger : Eur. Spine J., 16 (2007) 179-185. https://doi.org/10.1007/s00586-006-0064-5
  14. J. Y. Kim, H. W. Hwang, D. H. Lee, J. G. Lee, and D. G. Lee : J. Korean Soc. Heat Treatment, 34 (2021) 1-6. https://doi.org/10.12656/JKSHT.2021.34.1.1
  15. J. M. Cordeiro, L. P. Faverani, C. R. Grandini, E. C. Rangel, N. C. da Cruz, F. H. Nociti Junior, A. B. Almeida, F. B. Vicente, B. R. G. Morais, V. A. R. Barao, and W. G. Assuncao : Mater. Sci. Eng. C, 92 (2018) 849-861. https://doi.org/10.1016/j.msec.2018.07.046
  16. H. Okamoto : J. Phase Equilibria., 11 (1990) 513-519. https://doi.org/10.1007/bf02898272
  17. C. Li, Y. Zhan, and W. Jiang : Mater. Des., 32 (2011) 4598-4602. https://doi.org/10.1016/j.matdes.2011.03.072
  18. C. Colinet, R. Viennois, and J.-C. Tedenac : Calphad., 36 (2012) 118-126. https://doi.org/10.1016/j.calphad.2011.11.002
  19. H. Okamoto : J. Phase Equilibria Diffus., 31 (2010) 411-412. https://doi.org/10.1007/s11669-010-9734-4
  20. J. Zhang, H. Tang, and Y. Zhan : J. Mater. Res. Technol., 9 (2020) 8896-8904. https://doi.org/10.1016/j.jmrt.2020.05.112
  21. C. M. Lee, W. F. Ho, C. P. Ju, and J. H. C. Lin : J. Mater. Sci. Mater. Med., 13 (2002) 695-700. https://doi.org/10.1023/A:1015798011434
  22. Y. Okazaki, S. Rao, T. Tateishi, and Y. Ito : J. Mater. Sci. Eng. A, 243 (1998) 250-256. https://doi.org/10.1016/S0921-5093(97)00809-5
  23. M. Niinomi, Y. Liu, M. Nakai, H. Liu, and H. Li : Regen. Biomater., 3 (2016) 173-185. https://doi.org/10.1093/rb/rbw016
  24. 황건재 : 치과용 임플란트를 위한 저 탄성계수 및 자기민감성을 갖는 지르코늄기 합금 연구, 조선대학교 석사 학위논문 (2018).
  25. Li, Y. Zhan and W. Jiang : Mater. Des., 34 (2012) 479-482. https://doi.org/10.1016/j.matdes.2011.08.012
  26. D. A. Padmavathi : Mater. Sci. Appl., 2 (2011) 97-104. https://doi.org/10.4236/msa.2011.22013
  27. J. F. Schenck : Med. Phys., 23 (1996) 815-850. https://doi.org/10.1118/1.597854
  28. F. Y. Zhou, K. J. Qiu, H. F. Li, T. Huang, B. L. Wang, L. Li, and Y. F. Zheng : Acta Biomater., 9 (2013) 9578-9587. https://doi.org/10.1016/j.actbio.2013.07.035
  29. F. Y. Zhou, K. J. Qiu, D. Bian, Y. F. Zheng, and J. P. Lin : J. Mater. Sci. Technol., 30 (2014) 299-306. https://doi.org/10.1016/j.jmst.2013.12.006
  30. D. A. Jones : Principles and prevention of corrosion, 2nd ed, Prentice Hall (1996) 572.
  31. N. SEliaz, E. Gileadi : Physical Electrochemistry: Fundamentals, Techniques, and Applications, 2nd ed, Wiley-VCH (2019) 480.
  32. G. J. Ewers and E. H. Greener : J. Oral Rehabil., 12 (1985) 469-476. https://doi.org/10.1111/j.1365-2842.1985.tb01293.x
  33. Y. M. Yeon, Y. H. Jeong, and M.Y. Wee : Korean J. mater. Res., 7 (1997) 772-780.
  34. S. G. S. Charlena and M. Fajar : J. Phys. Conf., 776 (2016) 012056. https://doi.org/10.1088/1742-6596/776/1/012056
  35. J. M. Salman and M. L. Aziz : Iraqi J. Electr. Electron. Eng., 19 (2019) 138-156.
  36. N. Eliaz : Materials, 12 (2019) 407. https://doi.org/10.3390/ma12030407
  37. Suresh N. Kadam, Kailash R. Jagdeo, and M. R. Nair : IRJES, 3 (2014) 30-34.
  38. R. Xue, D. Wang, D. Yang, L. Zhang, X. Xu, L. Liu, and D. Wu : Materials, 13 (2020) 5130. https://doi.org/10.3390/ma13225130