DOI QR코드

DOI QR Code

Durability properties of mortars with fly ash containing recycled aggregates

  • Kurbetci, Sirin (Department of Civil Engineering, Karadeniz Technical University) ;
  • Nas, Memduh (Department of Civil Engineering, Karadeniz Technical University) ;
  • Sahin, Mustafa (Askale Cement Ready-Mixed Concrete Plant)
  • 투고 : 2020.06.15
  • 심사 : 2022.01.12
  • 발행 : 2022.01.25

초록

The rapid development of the construction industry in the world causes a rapid increase in the consumption of aggregate resources, which leads to the depletion of existing aggregate reserves. The use of recycled aggregate in the production of concrete and mortar may be a good solution to reduce the use of natural raw materials and to reduce demolition waste in the environment. In this study investigating the use of recycled aggregate in mortar production, mortar mixtures were produced by substituting 0%, 25%, 50% and 100% fine recycled aggregate (FRA) instead of natural aggregate. The effect of 20% and 40% fly ash (FA) substitutes on cement mortar performance was also investigated. Compressive and flexural strength, drying shrinkage, abrasion resistance, water absorption and capillary water absorption were investigated on the produced mortars. The increase in the use of FRA reduced the compressive and flexural strengths of mortars. While the capillarity coefficients, water absorption, rapid chloride permeability and drying shrinkage of the mortars increased with the increase in the use of FRA, the effect of the use of fly ash on the rate of increase remained lower. The increased use of FRA has improved abrasion resistance as well.

키워드

참고문헌

  1. Ahmed, S.F.U. (2014), "Properties of concrete containing recycled fine aggregate and fly ash", J. Solid. Waste Tech. Manag., 40(1), 70-78. https://doi.org/10.5276/JSWTM.2014.70.
  2. Alqahtani, F.K., Rashid, K., Zafar, I., Khan, M.I. and Ababtain, A.A. (2021), "Production of sustainable green mortar by ultrahigh utilization of fly ash: Technical, economic and environmental assessment", Constr. Build. Mater., 281, 122617. https://doi.org/10.1016/j.conbuildmat.2021.122617.
  3. ASTM C1148-02 (2002), Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar, ASTM International, West Conshohocken, PA, USA.
  4. ASTM C1202-19 (2019), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, USA.
  5. ASTM C1585-13 (2013), Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, ASTM International, West Conshohocken, PA, USA.
  6. ASTM C33/C33M-18 (2018), Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA, USA.
  7. ASTM C642-13 (2013), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, PA, USA.
  8. Atis, C.D., Kilic, A. and Sevim, U.K. (2004), "Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash", Cement Concrete Res., 34(1), 99-102. https://doi.org/10.1016/S0008- 8846(03)00247-3.
  9. Belin, P., Habert, G., Thiery, M. and Roussel, N. (2014), "Cement paste content and water absorption of recycled concrete coarse aggregates", Mater. Struct., 47(9), 1451-1465. https://doi.org/10.1617/s11527-013-0128-z.
  10. Bhikshma, V. and Divya, K. (2012), "Study on the permeability of the recycled aggregate concrete using fly ash", 37th Conference on Our World in Concrete.
  11. Bhoopesh, J. (2017), "Strength and behaviour of recycled aggregate geopolymer concrete beams", Adv. Concrete Constr., 5(2), 145-154. https://doi.org/10.12989/acc.2017.5.2.145.
  12. BS EN 1015-3 (1999), Methods of Test for Mortar for Masonry-Part 3: Determination of Consistence of Fresh mortar (by flow table), European Committee for Standardization, Brussels.
  13. BS EN 13892-3 (2014), Methods of Test for Screed Materials: Determination of Wear Resistance, Bohme, European Committee for Standardization, Brussels.
  14. Chindaprasirt, P., Chotithanorm, C., Cao, H.T. and Sirivivatnanon, V. (2007), "Influence of fly ash fineness on the chloride penetration of concrete", Constr. Build. Mater., 21(2), 56-361. https://doi.org/10.1016/j.conbuildmat.2005.08.010.
  15. Chindaprasirt, P., Jaturapitakkul, C. and Sinsiri, T. (2005), "Effect of fly ash fineness on compressive strength and pore size of blended cement paste", Cement Concrete Compos., 27(4), 425-428. https://doi.org/10.1016/j.cemconcomp.2004.07.003.
  16. Correia, J.R., De Brito, J. and Pereira, A.S. (2006), "Effects on concrete durability of using recycled ceramic aggregates", Mater. Struct., 39(286), 169-177. https://doi.org/10.1617/s11527-005-9014-7.
  17. Dinakar, P., Babu, K.G. and Santhanam, M. (2008), "Durability properties of high volume fly ash self compacting concretes", Cement Concrete Compos., 30(10), 880-886. https://doi.org/10.1016/j.cemconcomp.2008.06.011.
  18. Ermco (2018), Ready-mixed Concrete Industry Statistics Year 2017.
  19. Eurostat (2016), Waste Generation by Economic Activities and Households.
  20. Evangelista, L. and de Brito, J. (2007), "Mechanical behaviour of concrete made with fine recycled concrete aggregates", Cement Concrete Compos., 29(5), 397-401. https://doi.org/10.1016/j.cemconcomp.2006.12.004.
  21. Evangelista, L. and de Brito, J. (2010), "Durability performance of concrete made with fine recycled concrete aggregates", Cement Concrete Compos., 32(1), 9-14. https://doi.org/10.1016/j.cemconcomp.2009.09.005.
  22. Fan, C.C., Huang, R., Hwang, H. and Chao, S.J. (2015), "The effects of different fine recycled concrete aggregates on the properties of Mortar", Mater., 8(5), 2658-2672. https://doi.org/10.3390/ma8052658.
  23. Ferreira, L., De Brito, J. and Barra, M. (2011), "Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties", Mag. Concrete Res., 63(8), 617-627. https://doi.org/10.1680/macr.2011.63.8.617.
  24. Fonseca, N., De Brito, J. and Evangelista, L. (2011), "The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste", Cement Concrete Compos., 33(6), 637-643. https://doi.org/10.1016/j.cemconcomp.2011.04.002.
  25. Hanzic, L., Mautinger, A., Juric, B. and Pereira de Oliveira, L.A. (2008), "Water retention capability of mortars made of recycled aggregate", Proceedings of the Conference on Sustainable Building SB08, Rotterdam, Netherlands, September.
  26. Hatungimana, D., Taskopru, C, Ichedef, M., Sac, M.M. and Yazici, S. (2019), "Compressive strength, water absorption, water sorptivity and surface radon exhalation rate of silica fume and fly ash based mortar", J. Build. Eng., 23, 369-376. https://doi.org/10.1016/j.jobe.2019.01.011.
  27. Homwuttiwong, S., Jaturapidakkul, C. and Chindaprasirt, P. (2012), "Permeability and abrasion resistance of concretes containing high volume fine fly ash and palm oil fuel ash", Comput. Concrete, 10(4), 349-360. https://doi.org/10.12989/cac.2012.10.4.349.
  28. Hossain, M.M., Karim, M.R., Hasan, M., Hossain, M.K. and Zain, M.F.M. (2016), "Durability of mortar and concrete made up of pozzolans as a partial replacement of cement: A review", Constr. Build. Mater., 116, 128-140. https://doi.org/10.1016/j.conbuildmat.2016.04.147.
  29. Katz, A. (2003), "Properties of concrete made with recycled aggregate from partially hydrated old concrete", Cement Concrete Res., 33(5), 703-711. https://doi.org/10.1016/S0008-8846(02)01033-5.
  30. Khalaf, A.A., Idan, F.K. and Nasser, K.Z. (2018), "Effect the local fly ash on cement mortar properties", JUBES, 26(5), 383-394.
  31. Khatib, J.M. (2005), "Properties of concrete incorporating fine recycled aggregate", Cement Concrete Res., 35(4), 763-769. https://doi.org/10.1016/j.cemconres.2004.06.017.
  32. Kikuchi, M., Miura, T., Dosho, Y. and Narikawa, M. (1998), "Application of recycled aggregate concrete for structural concrete. Part 1-Experimental study on the quality of recycled aggregate and recycled aggregate concrete", Proceedings of the International Symposium: Use of recycled concrete aggregate Concrete Technology Unit, University of Dundee, London, November.
  33. Kou, S.C., Poon, C.S. and Chan, D. (2007), "Influence of fly ash as cement replacement on the properties of recycled aggregate concrete", J. Mater. Civil Eng., 19(9), 709-717. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:9(709).
  34. Kumar, S.G. (2019), "Influence of fluidity on mechanical and permeation performances of recycled aggregate mortar", Constr. Build. Mater., 213, 404-412. https://doi.org/10.1016/j.conbuildmat.2019.04.093.
  35. Kurad, R., Silvestre J.D., de Brito, J. and Ahmed, H. (2017), "Effect of incorporation of high volume of recycled concrete aggregates and fly ash on the strength and global warming potential of concrete", J. Clean. Prod., 166, 485-502. https://doi.org/10.1016/j.jclepro.2017.07.236.
  36. Kurda, J., de Brito, J. and D. Silvestre, J. (2019), "Water absorption and electrical resistivity of concrete with recycled concrete aggregates and fly ash", Cement Concrete Compos., 95, 169-182. https://doi.org/10.1016/j.cemconcomp.2018.10.004.
  37. Kuroda, M., Watanabe, T. and Terashi, N. (2000), "Increase of bond strength at interfacial transition zone by the use of fly ash", Cement Concrete Res., 30(2), 253-258. https://doi.org/10.1016/S0008-8846(99)00241-0.
  38. Ledesma, E.F., Jimenez, J.R., Ayuso, J., Fernandez, J.M. and De Brito, J. (2015), "Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production-Part-I: Ceramic masonry waste", J. Clean. Prod., 87(1), 692-706. https://doi.org/10.1016/j.jclepro.2014.10.084.
  39. Li, Z., Liu, J., Xiao, J., Zhong, P. and Wang, J. (2020), "Drying shrinkage of mortar manufactured with recycled fine aggregate at vary initial saturation degree", Constr. Build. Mater., 264, 120621. https://doi.org/10.1016/j.conbuildmat.2020.120621.
  40. Matias, D., De Brito, J., Rosa, A. and Pedro, D. (2013), "Mechanical properties of concrete produced with recycled coarse aggregates-Influence of the use of superplasticizers", Constr. Build. Mater., 44, 101-109. https://doi.org/10.1016/j.conbuildmat.2013.03.011.
  41. Mohammed, T.U., Yamaji, T. and Hamada, H. (2002), "Microstructures and interfaces in concrete after 15 years of exposure in tidal environment", ACI Mater. J., 99(4), 352-360. https://doi.org/10.14359/12217.
  42. Neno, C., de Brito, J. and Veiga, R. (2014), "Using fine recycled concrete aggregate for mortar production", Mater. Res., 17(1), 168-177. https://doi.org/10.1590/S1516-14392013005000164.
  43. Pacheco Torgal, F. and Castro-Gomes, J.P. (2006), "Influence of physical and geometrical properties of granite and limestone aggregates on the durability of a C20/25 strength class concrete", Constr. Build. Mater., 20(10), 1079-1088. https://doi.org/10.1016/j.conbuildmat.2005.01.063.
  44. Pereira, P., Evangelista, L. and De Brito, J. (2012), "The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates", Constr. Build. Mater., 28(1), 722-729. https://doi.org/10.1016/j.conbuildmat.2011.10.050.
  45. Poon, C.S., Shui, Z.H. and Lam, L. (2004a), "Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates", Constr. Build. Mater., 18(6), 461-468. https://doi.org/10.1016/j.conbuildmat.2004.03.005.
  46. Poon, C.S., Shui, Z.H., Lam, L., Fok, H. and Kou, S.C. (2004b), "Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete", Cement Concrete Res., 34(1), 31-36. https://doi.org/10.1016/S0008-8846(03)00186-8.
  47. Ramaswamy, K.P., Siddik, M.A. and Nazeer, M. (2011). "Workability and strength studies on fly ash modified masonry mortars", International Conference on Modeling and Simulation in Civil Engineering, Kollam.
  48. Ryu, J.S. (2002), "An experimental study on the effect of recycled aggregate concrete properties", Mag. Concrete Res., 54(1), 7-12. https://doi.org/10.1680/macr.2002.54.1.7.
  49. Saha, S. and Rajasekaran, C. (2016), "Mechanical properties of recycled aggregate concrete produced with Portland pozzolana cement", Adv. Concrete Constr., 4(1), 27-35. https://doi.org/10.12989/acc.2016.4.1.027.
  50. Sim, J. and Park, C. (2011), "Compressive strength and resistance to chloride ion penetration and carbonation of recycled aggregate concrete with varying amount of fly ash and fine recycled aggregate", Waste. Manag., 31(11), 2352-2360. https://doi.org/10.1016/j.wasman.2011.06.014.
  51. Statista (2018), Cement production globally and in the U.S. from 2010 to 2018.
  52. Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yaragal, Subhash C. (2015), "Potential use of mine tailings and fly ash in concrete", Adv. Concrete Constr., 3(1), 55-69. https://doi.org/10.12989/acc.2015.3.1.055.
  53. Supit, S.W.M., Shaikh, F.U.A. and Sarker, P.K. (2014), "Effect of ultrafine fly ash on mechanical properties of high volume fly ash mortar", Constr. Build. Mater., 51, 278-286. https://doi.org/10.1016/j.conbuildmat.2013.11.002.
  54. Tabatabaeian, M., Khaloo, A., Joshaghani, A. and Hajibandeh, E. (2017), "Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC", Constr. Build. Mater., 147, 497-509. https://doi.org/10.1016/j.conbuildmat.2017.04.181.
  55. Tavakoli, M. and Soroushian, P. (1996), "Drying shrinkage behavior of recycled aggregate concrete", Concrete Int., 18(11), 58-61.
  56. Thomas, J., Thaickavil, N.N. and Wilson, P.M. (2018), "Strength and durability of concrete containing crushed concrete aggregates", J. Build. Eng., 19, 349-365. https://doi.org/10.1016/j.jobe.2018.05.007.
  57. Wang, A., Zhang, C. And Sun, W. (2003), "Fly ash effects: I The morphological effect of fly ash", Cement Concrete Res., 33(12), 2023-2029. https://doi.org/10.1016/S0008-8846(03)00217-5.
  58. Yaragal, Subhash C. and Roshan A.K., M. (2017), "Usage potential of recycled aggregates in mortar and concrete", Adv. Concrete Constr., 5(3), 201-219. https://doi.org/10.12989/acc.2017.5.3.201.
  59. Yaragal, Subhash C., Teja, Dumpati C. and Shaffi, M. (2017), "Performance studies on concrete with recycled coarse aggregates", Adv. Concrete Constr., 4(4), 263-281. https://doi.org/10.12989/acc.2016.4.4.263.
  60. Yerramala, B. and Desai, B. (2012), "Influence of fly ash replacement on strength properties of cement mortar", Int. J. Eng. Sci. Tech., 4(8), 3657-3665.
  61. Zhu, X., Chen, X., Shen, N., Tian, H., Fan, X. and Lu, J. (2018) "Mechanical properties of pervious concrete with recycled aggregate", Comput. Concrete, 21(6), 623-635. https://doi.org/10.12989/cac.2018.21.6.623.