Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Internal Flow Analysis in Swash Plate Piston Pump for Marine Hydraulic Power Supply

선박 유압공급 장치용 사판식 유압 피스톤 펌프 내부 유동해석에 관한 연구

  • Yi, Chung-Seob (School of Lift Engineering, Korea Lift Collage) ;
  • Lee, Jeong-Sil (HYSG) ;
  • Lim, Jong-hak (Department of Mechanical and Aerospace Engineering, Graduate School, GNU) ;
  • Gwak, Beom-Seop (Department of Mechanical and Aerospace Engineering, Graduate School, GNU) ;
  • Lee, Ho Seong (Department of Mechanical Convergence Engineering, ERI, GNU) ;
  • Song, Chul Ki (School of Mechanical Engineering, ERI, GNU)
  • 이중섭 (한국승강기대학교 승강기공학부) ;
  • 이정실 (하이에스지) ;
  • 임종학 (경상국립대학교 대학원 기계설계학과) ;
  • 곽범섭 (경상국립대학교 대학원 기계설계학과) ;
  • 이호성 (경상국립대학교 기계융합공학과, 공학연구원) ;
  • 송철기 (경상국립대학교 기계공학부)
  • Received : 2021.07.27
  • Accepted : 2021.10.09
  • Published : 2022.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a flow analysis of a swash-plate type hydraulic piston pump installed on a hydraulic flow supply system for marine vessels is presented. A model and governing equations for computational fluid dynamics (CFD) analyses of swash-plate type hydraulic piston pumps were built, and simulation results regarding the internal flow field of the pump were obtained. By analyzing the internal flow of the swash-plate type hydraulic piston pump, we can confirm the time-dependent stroke of each piston as the pump rotates. We also verified that by analyzing the pulsating flow against the slope of the swash plate, the simulation results match well with the experimental results. The natural frequency of the system was computed to be approximately 380 Hz by applying and analyzing the fast Fourier transform (FFT) of each swash plate slope evaluated.

Keywords

Acknowledgement

본 논문은 2019년도 한국산업단지공단 생산기술 사업화지원사업 현장맞춤형 기술개발 사업의 지원 에 의해 연구되었음

References

  1. Kim, B. H., Ahn, K. C., Chung, S. W., and Kim, Y. H., "Development of the Linear Piston Pump Driven by the Hydraulic Power for the Solid Transferring", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 3, pp. 82-89, 2009.
  2. Yi, C. S., Suh, J. S., Song, C. K., Shin, Yun. J. H., and Chung, K. T., "A Study on the Flow Characteristic of Lubrication Oil System in Manual Transmission System for Large Commercial Vehicle", Journal of Korean Fluid Machinery and Systems, Vol. 13, No. 6, pp. 77-82, 2010. https://doi.org/10.5293/KFMA.2010.13.6.077
  3. Kim, D. M., Kim, S. D., Gu, J. S., and Oh, S., "Design of a Gerotor Pump and Experimental Investigation of its Volumetric Displacement Characteristics", Journal of Korean Society of Mechanical Engineers A, Vol. 35, No. 11, pp. 1383-1389, 2011.
  4. Lee, J. W., Moon, J. S., Kim, J. G., Sung, K. K., and Kim, H. M., "Acoustic Structure Interaction Analysis of the Core Support Barrel for Pump Pulsation Loads", Journal of Korean Society of Mechanical Engineers C, Vol. 5, No. 2, pp. 127-134, 2011.
  5. Kim, J. H., Shin, M. J., and Kim, M. K., "A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (1)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 69-75, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.069
  6. Kim, J. H., Shin, M. J., and Kim, M. K., "A Study on Structural Improvement of the Swashplate Axial Piston Pump Valve Block (2)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 76-81, 2018.
  7. Cho, Y. H., Lee, T. K., and Lee, Y. W., "A Study on the Flow Characteristic for Changing of Flow Region of the Motor Inserted Oil Pump", Journal of Korean Society of Power System Engineering, Vol. 16, No. 5, pp. 23-31, 2012.
  8. Choi, S. R., Lim, J. C., and Lee, I. Y., "Pressure Pulsation Characteristics of a Multiple- Delivery Radial Piston Hydrulic Pump", Journal of Korean Society of Fluid Power and Construction Equipments, Vol. 11, No. 2, pp. 1-8, 2014.
  9. Lee, Y. B., "A Study of the Life Test of Hydraulic Pump Driving Gear Box for the Large Excavator", Journal of the Korean Society of Marine Engineering, Vol. 39, No. 3, pp. 211-216, 2015. https://doi.org/10.5916/jkosme.2015.39.3.211
  10. Hong, H. J., Ji, H. S., and Kim, K. C., "PIV Measurement of Pulsatile Flows in 3D Curved Tubes Using Refractive Index Matching Method", Journal of the Korean Society of Mechanical Engineers B, Vol. 40, No. 8, pp. 511-517, 2016. https://doi.org/10.3795/KSME-B.2016.40.8.511
  11. Sa, J. W., Chung, W. J., Bae, J. H., and Lee, J. M., "Pulsation According to Pre-Compression Sections and Valve Plate Design for a Swash Plate Type Piston Pump", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 25, No. 1, pp. 89-95, 2016. https://doi.org/10.7735/ksmte.2016.25.1.89
  12. Zhen, Q., Wu, Y. T., Kim, D. S., Kim, S. B., and Lyu, S. K., "Study on Design of Hydraulic Pump with High Temperature and High Pressure Resistance for Cable-Stayed Bridge", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 118, No. 11, pp. 109-114, 2019.