Structural Engineering and Mechanics

  • 제84권3호
  • /
  • Pages.393-411
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of perlite powder on properties of structural lightweight concrete with perlite aggregate

  • Yan, Gongxing (School of Intelligent Construction, Luzhou Vocational and Technical College) ;
  • Al-Mulali, Mohammed Zuhear (Building & Construction Engineering Techniques Department, Al-Mustaqbal University College) ;
  • Madadi, Amirhossein (Department of Civil and Environmental Engineering, Francis College of Engineering, University of Massachusetts Lowell) ;
  • Albaijan, Ibrahim (Mechanical Engineering Department, College of Engineering at Al Kharj, Prince Sattam Bin Abdulaziz University) ;
  • Ali, H. Elhosiny (Department of Physics, Faculty of Science, King Khalid University) ;
  • Algarni, H. (Department of Physics, Faculty of Science, King Khalid University) ;
  • Le, Binh Nguyen (Institute of Research and Development, Duy Tan University) ;
  • Assilzadeh, Hamid (Department of Biomaterials, Saveetha Dental College and Hospital, Saveetha Institute of Medical and Technical Sciences)
  • 투고 : 2019.04.04
  • 심사 : 2022.09.27
  • 발행 : 2022.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

A high-performance reactive powder concrete (RPC) has been readied alongside river sand, with 1.25 mm particle size when under the condition of 80C steam curing. As a heat and sound insulation, expanded perlite aggregate (EPA) provides economic advantages in building. Concrete containing EPA is examined in terms of cement types (CEM II 32.5R and CEM I 42.5R), doses (0, 2%, 4% and 6%) as well as replacement rates in this research study. The compressive and density of concrete were used in the testing. At the end of the 28-day period, destructive and nondestructive tests were performed on cube specimens of 150 mm150 mm150 mm. The concrete density is not decreased with the addition of more perlite (from 45 to 60 percent), since the enlarged perlite has a very low barrier to crushing. To get a homogenous and fluid concrete mix, longer mixing times for all the mix components are necessary due to the higher amount of perlite. As a result, it is not suggested to use greater volumes of this aggregate in RPC. In the presence of de-icing salt, the lightweight RPC exhibits excellent freeze-thaw resistance (mass is less than 0.2 kg/m2). The addition of perlite strengthens the aggregate-matrix contact, but there is no apparent ITZ. An increased compressive strength was seen in concretes containing expanded perlite powder and steel fibers with good performance.

키워드

과제정보

The authors express their appreciation to the Deanship of Scientific Research at King Khalid University, Saudi Arabia, for funding this work under grant of number R.G.P.2/168/43. This work was supported by Al-Mustaqbal University College Grant number=MUC-E- 0122.

참고문헌

  1. Aggarwal, J., Sharma, S., Kamyab, H. and Kumar, A. (2020), "The realm of biopolymers and their usage: An overview", J. Environ. Treat. Tech., 8(2), 1005-1016.
  2. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Prob. Eng., 2015, Article ID 671527. https://doi.org/10.1155/2015/671527.
  3. Ali, A., Zhang, C., Bibi, T., Zhu, L., Cao, L., Li, C. and Hsiao, P.-C. (2022), "Investigation of five different low-cost locally available isolation layer materials used in sliding base isolation systems", Soil Dyn. Earthq. Eng., 154, 107127. https://doi.org/10.1016/j.soildyn.2021.107127.
  4. Alqadi, M.A., Mat Taib, S., Md Din, M.F. and Kamyab, H. (2018), "Effect of photoperiod on the growth of chlamydomonas incerta and pollutant removal", Malay. J. Civil Eng., 29, https://doi.org/10.11113/mjce.v29.15683.
  5. Anwar Hossain, K.M. (2004), "Properties of volcanic pumice based cement and lightweight concrete", Cement Concrete Res., 34(2), 283-291. https://doi.org/10.1016/j.cemconres.2003.08.004.
  6. Arabi-Nowdeh, S., Nasri, S., Saftjani, P.B., Naderipour, A., Abdul-Malek, Z., Kamyab, H. and Jafar-Nowdeh, A. (2021), "Multi-criteria optimal design of hybrid clean energy system with battery storage considering off- and on-grid application", J. Clean. Prod., 290, 125808. https://doi.org/10.1016/j.jclepro.2021.125808.
  7. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010b), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168-170, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  8. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010c), "Investigation of seismic behaviour of Composite Structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel Composite Structures, 21-23.
  9. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  10. Armaghani, D.J., Mirzaei, F., Shariati, M., Trung, N.T., Shariati, M. and Trnavac, D. (2020a), "Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber", Geomech. Eng., 20(3), 191-205. https://doi.org/10.12989/gae.2020.20.3.191.
  11. Armaghani, D.J., Mirzaei, F., Toghroli, A. and Shariati, A. (2020b), "Indirect measure of shear strength parameters of fiber-reinforced sandy soil using laboratory tests and intelligent systems", Geomech. Eng., 22(5), 397-414. https://doi.org/10.12989/gae.2020.22.5.397.
  12. Asadi, S., Nilashi, M., Samad, S., Rupani, P.F., Kamyab, H. and Abdullah, R. (2021), "A proposed adoption model for green IT in manufacturing industries", J. Clean. Prod., 297, 126629. https://doi.org/10.1016/j.jclepro.2021.126629.
  13. Asadolahi, S.M. and Fanaie, N. (2020), "Performance of self-centering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 23(9), 1813-1822. https://doi.org/10.1177/1369433219900940
  14. Ashokkumar, V., Chen, W.H., Kamyab, H., Kumar, G., Al-Muhtaseb, A.A.H. and Ngamcharussrivichai, C. (2019), "Cultivation of microalgae Chlorella sp. in municipal sewage for biofuel production and utilization of biochar derived from residue for the conversion of hematite iron ore (Fe2O3) to iron (Fe)-Integrated algal biorefinery", Energy, 189, 116128. https://doi.org/10.1016/j.energy.2019.116128.
  15. Ashraf, M.A., Peng, W.X., Fakhri, A., Hosseini, M., Kamyab, H. and Chelliapan, S. (2019), "Manganese disulfide-silicon dioxide nano-material: Synthesis, characterization, photocatalytic, antioxidant and antimicrobial studies", J. Photochem. Photobiol. B: Biol., 198, 111579. https://doi.org/10.1016/j.jphotobiol.2019.111579.
  16. Athar, M., Imdad, S., Zaidi, S., Yusuf, M., Kamyab, H., Jaromir Klemes, J. and Chelliapan, S. (2022), "Biodiesel production by single-step acid-catalysed transesterification of Jatropha oil under microwave heating with modelling and optimisation using response surface methodology", Fuel, 322, 124205. https://doi.org/10.1016/j.fuel.2022.124205.
  17. Balaraman, P., Balasubramanian, B., Kaliannan, D., Durai, M., Kamyab, H., Park, S., Chelliapan, S., Lee, C.T., Maluventhen, V. and Maruthupandian, A. (2020), "Phyco-synthesis of silver nanoparticles mediated from marine algae Sargassum myriocystum and its potential biological and environmental applications", Wast. Biomass Valoriz., 11(10), 5255-5271. https://doi.org/10.1007/s12649-020-01083-5.
  18. Balaraman, P., Balasubramanian, B., Liu, W.C., Kaliannan, D., Durai, M., Kamyab, H., Alwetaishi, M., Maluventhen, V., Ashokkumar, V., Chelliapan, S. and Maruthupandian, A. (2022), "Sargassum myriocystum-mediated TiO2-nanoparticles and their antimicrobial, larvicidal activities and enhanced photocatalytic degradation of various dyes", Environ. Res., 204, 112278. https://doi.org/10.1016/j.envres.2021.112278.
  19. Bao-guo, M., Hong-bo, Z. and Rong-zhen, D. (2002), "Development of a high sound absorption material CEMCOM", J. Wuhan Univ. Technol.-Mater. Sci. Ed., 17(4), 5-8.
  20. Cao, Y., Azar, S.M., Shah, S., Salih, A.F.M., Thiagi, T., Jermsittiparsert, K. and Ho, L.S. (2020a), "Performance assessment of buckling restrained brace with tubular profile", Adv. Nano Res., 8(4), 323-333. https://doi.org/10.12989/anr.2020.8.4.323.
  21. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020c), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Struct., 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.
  22. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019b), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  23. Cheng, H., Liu, L. and Sun, L. (2022), "Bridging the gap between laboratory and field moduli of asphalt layer for pavement design and assessment: A comprehensive loading frequency-based approach", Front. Struct. Civil Eng., 1-14. https://doi.org/10.1007/s11709-022-0811-7.
  24. Cheng, H., Sun, L., Wang, Y. and Chen, X. (2021), "Effects of actual loading waveforms on the fatigue behaviours of asphalt mixtures", Int. J. Fatigue, 151, 106386. https://doi.org/10.1016/j.ijfatigue.2021.106386.
  25. Cobanli, M. (1993), "Producing high-heat transfer coefficient light construction materials", M. Sc. Thesis, Osmangazi University.
  26. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi Arbat, P. (2011a), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/IJPS11.1585.
  27. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  28. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Compos. Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.
  29. Divyah, N., Thenmozhi, R., Neelamegam, M. and Prakash, R. (2021), "Characterization and behavior of basalt fiber-reinforced lightweight concrete", Struct. Concrete, 22(1), 422-430. https://doi.org/10.1002/suco.201900390.
  30. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TE-GDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  31. Elham, K. and Hesam, K. (2016), "Investigating the relationship between soil properties and infestation population of causal agent of soybean charcoal rot (Macrophomina phaseolina)", Acad. J. Agricult. Res., 4(6), 363-373.
  32. Elshafie, S. and Whittleston, G. (2015), "A review of the effect of basalt fibre lengths and proportions on the mechanical properties of concrete", Int. J. Res. Eng. Technol., 4(1), 458-465.
  33. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  34. Fanaie, N. and Tahriri, M. (2017b), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032.
  35. Fanaie, N., Kazerani, S. and Soroushnia, S. (2017a), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Meth. Civil Eng., 1(3), 16-23. https://doi.org/10.29252/nmce.1.3.16.
  36. Feng, J., Chen, B., Sun, W. and Wang, Y. (2021), "Microbial induced calcium carbonate precipitation study using Bacillus subtilis with application to self-healing concrete preparation and characterization", Constr. Build. Mater., 280, 122460. https://doi.org/10.1016/j.conbuildmat.2021.122460.
  37. Ghanbari-Ghazijahani, T., Nabati, A., Azandariani, M.G. and Fanaie, N. (2020), "Crushing of steel tubes with different infills under partial axial loading", Thin Wall. Struct., 149, 106614. https://doi.org/10.1016/j.tws.2020.106614.
  38. Hadibarata, T., Khudhair, A.B., Kristanti, R.A. and Kamyab, H. (2017), "Biodegradation of pyrene by Candida sp. S1 under high salinity conditions", Bioproc. Biosyst. Eng., 40(9), 1411-1418. https://doi.org/10.1007/s00449-017-1798-7.
  39. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  40. Hashim, H., Ramlan, M.R., Shiun, L.J., Siong, H.C., Kamyab, H., Majid, M.Z.A. and Lee, C.T. (2015), "an integrated carbon accounting and mitigation framework for greening the industry", Energy Procedia, 75, 2993-2998. https://doi.org/10.1016/j.egypro.2015.07.609.
  41. Hosseini, M., Fazelian, N., Fakhri, A., Kamyab, H., Yadav, K. K. and Chelliapan, S. (2019), "Preparation, and structural of new NiS-SiO2 and Cr2S3-TiO2 nano-catalyst: Photocatalytic and antimicrobial studies", J. Photochem. Photobiol. B: Biol., 194, 128-134. https://doi.org/10.1016/j.jphotobiol.2019.03.016.
  42. Hosseini, S. A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constr., 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.
  43. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  44. Hosur Shivaramaiah, N.K., Kattimani, S., Shariati, M. and Nguyen-Thoi, T. (2022), "Geometrically nonlinear behavior of two-directional functionally graded porous plates with four different materials", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 09544062221111038. https://doi.org/10.1177/09544062221111038.
  45. Huang, H., Huang, M., Zhang, W. and Yang, S. (2021), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastr. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.
  46. Iqbal, S., Ali, A., Holschemacher, K. and Bier, T.A. (2015), "Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)", Constr. Build. Mater., 98, 325-333. https://doi.org/10.1016/j.conbuildmat.2015.08.112.
  47. Ismail, M., Shariati, M., Awal, A.S.M.A., Chiong, C.E., Chahnasir, E.S., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  48. Jafar-Nowdeh, A., Babanezhad, M., Arabi-Nowdeh, S., Naderipour, A., Kamyab, H., Abdul-Malek, Z. and Ramachandaramurthy, V.K. (2020), "Meta-heuristic matrix moth-flame algorithm for optimal reconfiguration of distribution networks and placement of solar and wind renewable sources considering reliability", Environ. Technol. Innov., 20, 101118. https://doi.org/10.1016/j.eti.2020.101118.
  49. Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Constr. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.
  50. Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M., Kazemi, M., Rahmani, A. and Rashidi, M. (2022), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pavem. Des., 23(9), 2057-2075. https://doi.org/10.1080/14680629.2021.1950816.
  51. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324.
  52. Jasni, A.B., Kamyab, H., Chelliapan, S., Arumugam, N., Krishnan, S. and Din, M.F.M. (2020), "Treatment of wastewater using response surface methodology: A brief review", Chem. Eng. Trans., 78, 535-540. https://doi.org/10.3303/CET2078090.
  53. Jedidi, M., Benjeddou, O. and Soussi, C. (2015), "Effect of expanded perlite aggregate dosage on properties of lightweight concrete", Jordan J. Civil Eng., 9(3).
  54. Ji, X., Cheng, Y., Tian, J., Zhang, S., Jing, Y. and Shi, M. (2021), "Structural characterization of polysaccharide from jujube (Ziziphus jujuba Mill.) fruit", Chem. Biolog. Technol. Agricult., 8(1), 1-7. https://doi.org/10.1186/s40538-021-00255-2.
  55. Juncheng, G., Mohammadreza, K., Danial Jahed, A., Aria, G., Shahrizan, B., Armin, M., Ali, S., Majid, K. and Jian, Z. (2020), "Evaluating the bond strength of FRP in concrete samples using machine learning methods", Smart Struct. Syst., 26(4), 403-418. http://doi.org/10.12989/sss.2020.26.4.403.
  56. Kalaimurugan, D., Balamuralikrishnan, B., Govindarajan, R.K., Al-Dhabi, N.A., Valan Arasu, M., Vadivalagan, C., Venkatesan, S., Kamyab, H., Chelliapan, S. and Khanongnuch, C. (2022), "Production and characterization of a novel biosurfactant molecule from bacillus safensis YKS2 and assessment of its efficiencies in wastewater treatment by a directed metagenomic approach", Sustain., 14(4), 2142. https://doi.org/10.3390/su14042142.
  57. Kamyab, H., Chelliapan, S., Din, M.F.M., Lee, C.T., Rezania, S., Khademi, T. and Bong, C.P.C. (2018a), "Isolate new microalgal strain for biodiesel production and using FTIR spectroscopy for assessment of pollutant removal from palm oil mill effluent (POME)", Chem. Eng. Trans., 63, 91-96.
  58. Kamyab, H., Chelliapan, S., Din, M.F.M., Shahbazian-Yassar, R., Rezania, S., Khademi, T., Kumar, A. and Azimi, M. (2017a), "Evaluation of Lemna minor and Chlamydomonas to treat palm oil mill effluent and fertilizer production", J. Water Proc. Eng., 17, 229-236. https://doi.org/10.1016/j.jwpe.2017.04.007.
  59. Kamyab, H., Chelliapan, S., Lee, C.T., Khademi, T., Kumar, A., Yadav, K.K., Rezania, S., Kumar, S. and Ebrahimi, S.S. (2019b), "Improved production of lipid contents by cultivating Chlorella pyrenoidosa in heterogeneous organic substrates", Clean Technol. Environ. Policy, 21(10), 1969-1978. https://doi.org/10.1007/s10098-019-01743-8.
  60. Kamyab, H., Chelliapan, S., Shahbazian-Yassar, R., Din, M.F.M., Khademi, T., Kumar, A. and Rezania, S. (2017b), "Evaluation of lipid content in microalgae biomass using palm oil mill effluent (Pome)", Jom, 69(8), 1361-1367. https://doi.org/10.1007/s11837-017-2428-1.
  61. Kamyab, H., Din, M.F.M., Ghoshal, S.K., Lee, C.T., Keyvanfar, A., Bavafa, A.A., Rezania, S. and Lim, J.S. (2016a), "Chlorella pyrenoidosa mediated lipid production using Malaysian agricultural wastewater: effects of photon and carbon", Wast. Biomass Valoriz., 7(4), 779-788. https://doi.org/10.1007/s12649-016-9556-7.
  62. Kamyab, H., Din, M.F.M., Hosseini, S.E., Ghoshal, S.K., Ashokkumar, V., Keyvanfar, A., Shafaghat, A., Lee, C.T., Bavafa, A.A. and Majid, M.Z.A. (2016b), "Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate", Clean Technol. Environ. Policy, 18(8), 2513-2523. https://doi.org/10.1007/s10098-016-1212-1.
  63. Kamyab, H., Din, M.F.M., Tin, C.L., Ponraj, M., Soltani, M., Mohamad, S.E. and Roudi, A.M. (2014a), "Micro-macro algal mixture as a promising agent for treating POME discharge and its potential use as animal feed stock enhancer", J. Teknologi, 68(5), https://doi.org/10.11113/jt.v68.3021.
  64. Kamyab, H., Friedler, F., Klemes, J.J., Chelliapan, S. and Rezania, S. (2018b), "Bioenergy production and nutrients removal by green microalgae with cultivation from agro-wastewater palm oil mill effluent (POME)-A review", Chem. Eng. Trans., 70, 2197-2202.
  65. Kamyab, H., Goh, R.K.Y., Wong, J.H., Lim, J.S., Khademi, T., Ho, W.S., Ahmad, R., Hashim, H., Ho, C.S. and Lee, C.T. (2015a), "Cost-benefit and greenhouse-gases mitigation of food waste composting: A case study in Malaysia", Chem. Eng. Trans., 45, 577-582.
  66. Kamyab, H., Klemes, J.J., Fan, Y.V. and Lee, C.T. (2020), "Transition to sustainable energy system for smart cities and industries", Energy, 207, 118104. https://doi.org/10.1016/j.energy.2020.118104.
  67. Kamyab, H., Lim, J.S., Khademi, T., Hod, W.S., Ahmad, R., Hashim, H., Siong, H.C., Keyvanfar, A. and Lee, C.T. (2015b), "Greenhouse gas emission of organic waste composting: A case study of Universiti Teknologi Malaysia green campus flagship project", J. Teknologi, 74(4), https://doi.org/10.11113/jt.v74.4618.
  68. Kamyab, H., Md Din, M.F., Lee, C.T., Keyvanfar, A., Shafaghat, A., Majid, M.Z.A., Ponraj, M. and Yun, T.X. (2015c), "Lipid production by microalgae Chlorella pyrenoidosa cultivated in palm oil mill effluent (POME) using hybrid photo bioreactor (HPBR)", Desalin. Water Treat., 55(13), 3737-3749. https://doi.org/10.1080/19443994.2014.957943.
  69. Kamyab, H., Md Din, M.F., Ponraj, M., Keyvanfar, A., Rezania, S., Taib, S.M. and Abd Majid, M.Z. (2016c), "Isolation and screening of microalgae from agro-industrial wastewater (POME) for biomass and biodiesel sources", Desalin. Water Treat., 57(60), 29118-29125. https://doi.org/10.1080/19443994.2016.1139101.
  70. Kamyab, H., Naderipour, A., Jahannoush, M., Abdullah, A. and Marzbali, M.H. (2022), "Potential effect of SARS-CoV-2 on solar energy generation: Environmental dynamics and implications", Sustain. Energy Technol. Assess., 52, 102027. https://doi.org/10.1016/j.seta.2022.102027.
  71. Kamyab, H., Soltani, M., Ponraj, M., Din, M. and Putri, E.V. (2013), "A review on microalgae as potential lipid container with wastewater treating functions", J. Environ. Treat. Techniq., 1(2), 76-80.
  72. Kamyab, H., Tin Lee, C., Md Din, M.F., Ponraj, M., Mohamad, S.E. and Sohrabi, M. (2014b), "Effects of nitrogen source on enhancing growth conditions of green algae to produce higher lipid", Desalin. Water Treat., 52(19-21), 3579-3584. https://doi.org/10.1080/19443994.2013.854030.
  73. Karakoc, M.B. and Demirboga, R. (2010), "HSC with expanded perlite aggregate at wet and dry curing conditions", J. Mater. Civil Eng., 22(12), 1252-1259. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000134.
  74. Karimi, H., Rahmani, R., Othman, M.F., Zohoori, B., Mahrami, M., Kamyab, H. and Hosseini, S.E. (2016), "An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks", Plasmonic., 11(1), 95-102. https://doi.org/10.1007/s11468-015-9998-y.
  75. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019a), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36, 1539-1558 https://doi.org/10.1007/s00366-019-00780-7.
  76. Kazerani, S., Fanaie, N. and Soroushnia, S. (2017), "Seismic behavior of drilled beam section in moment connections", Int. J. Numer. Meth. Civil Eng., 1(4), 1-6. https://doi.org/10.29252/nmce.1.4.1.
  77. Khonsari, V., Eslami, E. and Anvari, A. (2010), "Effects of expanded perlite aggregate (EPA) on the mechanical behavior of lightweight concrete", Proceedings of the 7th International Conference on Fracture and Mechanics of Concrete & Concrete Structure (FraMCoS-7), Jeju, Korea.
  78. Khorami, M., Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M.M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://doi.org/10.12989/eas.2017.13.6.531.
  79. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017d), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  80. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. M. (2017b), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. http://doi.org/10.12989/scs.2017.23.1.067.
  81. Khoshnava, S.M., Rostami, R., Zin, R.M., Kamyab, H., Abd Majid, M.Z., Yousefpour, A. and Mardani, A. (2020), "Green efforts to link the economy and infrastructure strategies in the context of sustainable development", Energy, 193, 116759. https://doi.org/10.1016/j.energy.2019.116759.
  82. Khudhair, A.B., Hadibarata, T., Yusoff, A.R.M., Teh, Z.C., Adnan, L.A. and Kamyab, H. (2015), "Pyrene metabolism by new species isolated from soil Rhizoctonia zeae SOL3", Water Air Soil Pollut., 226(6), 1-9. https://doi.org/10.1007/s11270-015-2432-4.
  83. Kramar, D. and Bindiganavile, V. (2013), "Impact response of lightweight mortars containing expanded perlite", Cement Concrete Compos., 37, 205-214. https://doi.org/10.1016/j.cemconcomp.2012.10.004.
  84. Krishnan, S., Md Din, M.F., Taib, S.M., Nasrullah, M., Sakinah, M., Wahid, Z.A., Kamyab, H., Chelliapan, S., Rezania, S. and Singh, L. (2019), "Accelerated two-stage bioprocess for hydrogen and methane production from palm oil mill effluent using continuous stirred tank reactor and microbial electrolysis cell", J. Clean. Prod., 229, 84-93. https://doi.org/10.1016/j.jclepro.2019.04.365.
  85. Kumar, A., Gudiukaite, R., Gricajeva, A., Sadauskas, M., Malunavicius, V., Kamyab, H., Sharma, S., Sharma, T. and Pant, D. (2020), "Microbial lipolytic enzymes-promising energy-efficient biocatalysts in bioremediation", Energy, 192, 116674. https://doi.org/10.1016/j.energy.2019.116674.
  86. Kumar, A., Sharma, T., Mulla, S.I., Kamyab, H., Pant, D. and Sharma, S. (2019), "Let's protect our earth: Environmental challenges and implications", Microbes and Enzymes in Soil Health and Bioremediation, Springer, Singapore.
  87. Lan, Y., Zheng, B., Shi, T., Ma, C., Liu, Y. and Zhao, Z. (2022), "Crack resistance property of carbon nanotubes-modified concrete", Mag. Concrete Res., 1-11. http://doi.org/10.1680/jmacr.21.00227.
  88. Leila, R., Morteza, N., Mahdi, S. and Maryam, S. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. http://doi.org/10.12989/sem.2020.74.2.145.
  89. Li, D.Y., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019c), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  90. Libre, N.A., Shekarchi, M., Mahoutian, M. and Soroushian, P. (2011), "Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice", Constr. Build. Mater., 25(5), 2458-2464. https://doi.org/10.1016/j.conbuildmat.2010.11.058.
  91. Lin, X.M., Kireeva, N., Timoshin, A.V., Naderipour, A., Abdul-Malek, Z. and Kamyab, H. (2021), "A multi-criteria framework for designing of stand-alone and grid-connected photovoltaic, wind, battery clean energy system considering reliability and economic assessment", Energy, 224, 120154. https://doi.org/10.1016/j.energy.2021.120154.
  92. Lo, T.Y., Tang, W.C. and Cui, H.Z. (2007), "The effects of aggregate properties on lightweight concrete", Build. Environ., 42(8), 3025-3029. https://doi.org/10.1016/j.buildenv.2005.06.031.
  93. Lu, N., Wang, H., Wang, K. and Liu, Y. (2021), "Maximum probabilistic and dynamic traffic load effects on short-to-medium span bridges", Comput. Model. Eng. Sci., 127(1), 345-360. https://doi.org/10.32604/cmes.2021.013792.
  94. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech.-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  95. Luo, Y., Zheng, H., Zhang, H. and Liu, Y. (2021), "Fatigue reliability evaluation of aging prestressed concrete bridge accounting for stochastic traffic loading and resistance degradation", Adv. Struct. Eng., 24(13), 3021-3029. http://doi.org/10.1177/13694332211017995.
  96. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019a), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. http://doi.org/10.12989/scs.2019.30.3.271.
  97. Mahdi, S., Arian, H., Yousef, Z., Hossein, L., Ali, T., Peiman, K., Maryam, S., Musab, N.A.S. and Shek, P.N. (2019a), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  98. Mahdi, S., Mostafa, G., Morteza, N., Nasrollah, A. and Ali, T. (2020), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  99. Mahdi, S., Shervin Safaei, F., Peyman, M., Seyedmasoud, B., Yousef, Z., Davood Rezaee, M., Ali, T., Nguyen-Thoi, T. and Musab, N.A.S. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  100. Manikandan, V., Balasubramanian, B., Bharti, B., Velmurugan, P., Elango, D., Baskaran, R., Kamyab, H., Abdellattif, M. H., Chelliapan, S. and Jayanthi, P. (2022), "Development of ZnO/MOGAC nanocomposites for enhanced photocatalytic removal of PO43- and NO3-ions from wastewater under various light irradiations", Biomass Convers. Biorefin., 1-18.
  101. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  102. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M.M. and Petkovic, D. (2019), "RETRACTED ARTICLE: Analysis of influential factors forpredicting the shear strength of a V-shaped angle shear connector in composite beamsusing an adaptive neuro-fuzzy technique", J. Intel. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6.
  103. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  104. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustain., 14(8), 4752. https://doi.org/10.3390/su14084752.
  105. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019a), "UML diagrams for dynamical monitoring of rail vehicles", Physica A-Stat. Mech. Its Appl., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  106. Mishra, A.R., Mardani, A., Rani, P., Kamyab, H. and Alrasheedi, M. (2021), "A new intuitionistic fuzzy combinative distance-based assessment framework to assess low-carbon sustainable suppliers in the maritime sector", Energy, 237, 121500. https://doi.org/10.1016/j.energy.2021.121500.
  107. Moghadam, H., Fanaei, N. and Motazedian, D. (2010), "Estimation of stress drop for some large shallow earthquakes using stochastic point source and finite fault modeling", Scientia Iranica, 17(3).
  108. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Khanouki, M.M.A. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  109. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  110. Mohammadhassani, M., Nezamabadi-pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  111. Mohammadi, Y., Carkon-Azad, R., Singh, S.P. and Kaushik, S.K. (2009), "Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio", Constr. Build. Mater., 23(1), 183-189. https://doi.org/10.1016/j.conbuildmat.2008.01.002.
  112. Mojaveryazdia, F.S., Zainb, N.A.B.M. and Rezaniac, S. (2013), "Production of biodegradable polymers (PHA) through low cost carbon sources: Green chemistry", Int. J., 4(3).
  113. Morteza, N., Kia Moghaddas, N., Mahdi, S. and Ali, T. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  114. Mou, B. and Bai, Y.T. (2018), "Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone", Eng. Struct., 168, 487-504. https://doi.org/10.1016/j.engstruct.2018.04.029.
  115. Muhammad, N.Z., Shafaghat, A., Keyvanfar, A., Majid, M.Z.A., Ghoshal, S., Yasouj, S.E.M., Ganiyu, A.A., Kouchaksaraei, M. S., Kamyab, H. and Taheri, M.M. (2016), "Tests and methods of evaluating the self-healing efficiency of concrete: A review", Constr. Build. Mater., 112, 1123-1132. https://doi.org/10.1016/j.conbuildmat.2016.03.017.
  116. Naderipour, A., Abdul-Malek, Z., Arshad, R.N., Kamyab, H., Chelliapan, S., Ashokkumar, V. and Tavalaei, J. (2021a), "Assessment of carbon footprint from transportation, electricity, water, and waste generation: Towards utilisation of renewable energy sources", Clean Technol. Environ. Policy, 23(1), 183-201. https://doi.org/10.1007/s10098-020-02017-4 .
  117. Naderipour, A., Abdul-Malek, Z., Davoodkhani, I.F., Kamyab, H. and Ali, R.R. (2021b), "Load-frequency control in an islanded microgrid PV/WT/FC/ESS using an optimal self-tuning fractional-order fuzzy controller", Environ. Sci. Pollut. Res., 1-12. https://doi.org/10.1007/s11356-021-14799-1.
  118. Naderipour, A., Abdul-Malek, Z., Noorden, Z.A., Davoudkhani, I.F., Nowdeh, S.A., Kamyab, H., Chelliapan, S. and Ghiasi, S.M.S. (2021c), "Carrier wave optimization for multi-level photovoltaic system to improvement of power quality in industrial environments based on Salp swarm algorithm", Environ. Technol. Innov., 21, 101197. https://doi.org/10.1016/j.eti.2020.101197.
  119. Naderipour, A., Abdul-Malek, Z., Nowdeh, S.A., Kamyab, H., Ramtin, A.R., Shahrokhi, S. and Klemes, J.J. (2021d), "Comparative evaluation of hybrid photovoltaic, wind, tidal and fuel cell clean system design for different regions with remote application considering cost", J. Clean. Prod., 283, 124207. https://doi.org/10.1016/j.jclepro.2020.124207.
  120. Naderipour, A., Nowdeh, S.A., Saftjani, P.B., Abdul-Malek, Z., Bin Mustafa, M.W., Kamyab, H. and Davoudkhani, I.F. (2021e), "Deterministic and probabilistic multi-objective placement and sizing of wind renewable energy sources using improved spotted hyena optimizer", J. Clean. Prod., 286, 124941. https://doi.org/10.1016/j.jclepro.2020.124941.
  121. Naderipour, A., Ramtin, A.R., Abdullah, A., Marzbali, M.H., Nowdeh, S.A. and Kamyab, H. (2022), "Hybrid energy system optimization with battery storage for remote area application considering loss of energy probability and economic analysis", Energy, 239, 122303. https://doi.org/10.1016/j.energy.2021.122303.
  122. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  123. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020c), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.
  124. Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", Bull. Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z.
  125. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  126. Naveen Kumar, H., Kattimani, S., Marques, F.D., Nguyen-Thoi, T. and Shariati, M. (2022), "Geometrically nonlinear study of functionally graded saturated porous plates based on refined shear deformation plate theory and Biot's theory", Int. J. Struct. Stab. Dyn., 2350013. https://doi.org/10.1142/S021945542350013X.
  127. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M.D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  128. Nouri, K., Sulong, N.H.R., Ibrahim, Z. and Shariati, M. (2021b), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.
  129. Oktay, H., Yumrutas, R. and Akpolat, A. (2015), "Mechanical and thermophysical properties of lightweight aggregate concretes", Constr. Build. Mater., 96, 217-225. https://doi.org/10.1016/j.conbuildmat.2015.08.015.
  130. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  131. Parichehreh, R., Gheshlaghi, R., Mahdavi, M.A. and Kamyab, H. (2021), "Investigating the effects of eleven key physicochemical factors on growth and lipid accumulation of Chlorella sp. as a feedstock for biodiesel production", J. Biotechnol., 340, 64-74. https://doi.org/10.1016/j.jbiotec.2021.08.010.
  132. Partovi, F. and Fanaie, N. (2020), "Controlling deflection of long steel I-shaped girder bridge using two V-shaped pre-tensioning cables", J. Central South Univ., 27(2), 566-577. https://doi.org/10.1007/s11771-020-4317-y.
  133. Ponraj, M., Talaiekhozani, A., Rosli, M., Mohammad Zin, A.M. M., Keyvanfar, A. and Kamyab, H. (2015), "Bioconcrete strength, durability, permeability, recycling and effects on human health: A review", Int. Conf. Advances in Civil, Structural and Mechanical Engineering.
  134. Prasad, S., Kumar, S., Yadav, K.K., Choudhry, J., Kamyab, H., Bach, Q.V., Sheetal, K.R., Kannojiya, S. and Gupta, N. (2020), "Screening and evaluation of cellulytic fungal strains for saccharification and bioethanol production from rice residue", Energy, 190, 116422. https://doi.org/10.1016/j.energy.2019.116422.
  135. Priya, A., Anusha, G., Thanigaivel, S., Karthick, A., Mohanavel, V., Velmurugan, P., Balasubramanian, B., Ravichandran, M., Kamyab, H., Kirpichnikova, I.M. and Chelliapan, S. (2022), "Removing microplastics from wastewater using leading-edge treatment technologies: a solution to microplastic pollution-a review", Bioproc. Biosyst. Eng., 1-13. https://doi.org/10.1007/s00449-022-02715-x.
  136. Pushparaj, K., Liu, W.C., Meyyazhagan, A., Orlacchio, A., Pappusamy, M., Vadivalagan, C., Robert, A.A., Arumugam, V.A., Kamyab, H., Klemes, J.J., Khademi, T., Mesbah, M., Chelliapan, S. and Balasubramanian, B. (2022), "Nano- from nature to nurture: A comprehensive review on facets, trends, perspectives and sustainability of nanotechnology in the food sector", Energy, 240, 122732. https://doi.org/10.1016/j.energy.2021.122732.
  137. Quan, L.M., Kamyab, H., Yuzir, A., Ashokkumar, V., Hosseini, S.E., Balasubramanian, B. and Kirpichnikova, I. (2022), "Review of the application of gasification and combustion technology and waste-to-energy technologies in sewage sludge treatment", Fuel, 316, 123199. https://doi.org/10.1016/j.fuel.2022.123199.
  138. Rakhmania, Kamyab, H., Yuzir, M.A., Abdullah, N., Quan, L.M., Riyadi, F.A. and Marzouki, R. (2022), "Recent applications of the electrocoagulation process on agro-based industrial wastewater: A review", Sustain., 14(4), 1985. https://doi.org/10.3390/su14041985.
  139. Rawat, I., Gupta, S.K., Shriwastav, A., Singh, P., Kumari, S. and Bux, F. (2016). Microalgae Applications in Wastewater Treatment, Algae Biotechnology. Springer, Cham.
  140. Ray, A., Sriravindrarajah, R., Guerbois, J.P., Thomas, P., Border, S., Ray, H., Haggman, J. and Joyce, P. (2007), "Evaluation ofwaste perlite fines in the production of construction materials", J. Therm. Anal. Calorim., 88(1), 279-283. https://doi.org/10.1007/s10973-006-8107-z.
  141. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020a), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  142. Resdi, R., Lim, J.S., Kamyab, H., Lee, C.T., Hashim, H., Mohamad, N. and Ho, W.S. (2016), "Review of microalgae growth in palm oil mill effluent for lipid production", Clean Technol. Environ. Policy, 18(8), 2347-2361. https://doi.org/10.1007/s10098-016-1204-1.
  143. Rezania, S., Din, M.F.M., Mohamad, S.E., Sohaili, J., Taib, S.M., Yusof, M.B.M., Kamyab, H., Darajeh, N. and Ahsan, A. (2017), "Review on pretreatment methods and ethanol production from cellulosic water hyacinth", BioResour., 12(1), 2108-2124. https://doi.org/10.15376/biores.12.1.Rezania
  144. Rezania, S., Kamyab, H., Rupani, P.F., Park, J., Nawrot, N., Wojciechowska, E., ... & Cabral-Pinto, M.M. (2021), "Recent advances on the removal of phosphorus in aquatic plant-based systems", Environ. Technol. Innov., 24, 101933. https://doi.org/10.1016/j.eti.2021.101933.
  145. Roudi, A., Chelliapan, S., Kamyab, H., Md Din, M.F. and Krishnan, S. (2019), "Removal of COD from landfill leachate by predication and evaluation of Multiple Linear Regression (MLR) model and fenton process", Egypt. J. Chem., 62(7), 1207-1218.
  146. Roudi, A.M., Kamyab, H., Chelliapan, S., Ashokkumar, V., Kumar, A., Yadav, K.K. and Gupta, N. (2020), "Application of response surface method for Total organic carbon reduction in leachate treatment using Fenton process", Environ. Technol. Innov., 19, 101009. https://doi.org/10.1016/j.eti.2020.101009.
  147. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413.
  148. Safa, M., Ahmadi, M., Mehrmashadi, J., Petkovic, D., Mohammadhassani, M., Zandi, Y. and Sedghi, Y. (2020a), "Selection of the most influential parameters on vectorial crystal growth of highly oriented vertically aligned carbon nanotubes by adaptive neuro-fuzzy technique", Int. J. Hydromechatron., 3(3), 238-251. https://doi.org/10.1504/IJHM.2020.109919
  149. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533-542. https://doi.org/10.12989/gae.2019.19.6.533
  150. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020b), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Stat. Mech. Its Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  151. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Bin Baharom, S., Nor, N.M. and Petkovic, D. (2016a), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  152. Sajedi, F. and Shariati, M. (2019a), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  153. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  154. Seyed Mehdi, D. and Seo, H.J. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  155. Shah, S., Sulong, N.R., Shariati, M. and Jumaat, M. (2015a), "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  156. Shah, S.N.R., Ramli Sulong, N.H., Khan, R., Jumaat, M.Z. and Shariati, M. (2016a), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  157. Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. and Shariati, M. (2016c), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  158. Shah, S.N.R., Sulong, N.H.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016d), "Behavior of Industrial Steel Rack Connections", Mech. Syst. Signal Pr., 70-71, 725-740 https://doi.org/10.1016/j.ymssp.2015.08.026.
  159. Shah, S.N.R., Sulong, N.H.R., Shariati, M. and Jumaat, M.Z. (2015b), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  160. Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016e), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. http://doi.org/10.1016/j.tws.2016.05.021.
  161. Shahabaldin, R., Mohd, F., Shazwin, M.T., Shaza, E.M., Farrah, A.D., Hesam, K., Negisa, D. and Shirin, S.E. (2018), "Ethanol production from water hyacinth (Eichhornia crassipes) using various types of enhancers based on the consumable sugars", Wast. Biomass Valoriz., 9(6), 939-946. https://doi.org/10.1007/s12649-017-9883-3.
  162. Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. http://doi.org/10.12989/scs.2016.20.1.185.
  163. Shahabi, S., Sulong, N., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. http://doi.org/10.12989/scs.2016.20.3.651.
  164. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  165. Shariati, A. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  166. Shariati, A., Barati, M. R., Ebrahimi, F. and Toghroli, A. (2020b), "Investigation of microstructure and surface effects on vibrational characteristics of nanobeams based on nonlocal couple stress theory", Adv. Nano Res., 8(3), 191-202. https://doi.org/10.12989/anr.2020.8.3.191.
  167. Shariati, A., Barati, M.R., Ebrahimi, F., Singhal, A. and Toghroli, A. (2020a), "Investigating vibrational behavior of graphene sheets under linearly varying in-plane bending load based on the nonlocal strain gradient theory", Adv. Nano Res., 8(4), 265-276 https://doi.org/10.12989/anr.2020.8.4.265.
  168. Shariati, A., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020c), "Wave propagation analysis of electro-rheological fluid-filled sandwich composite beam", Mech. Bas. Des. Struct. Mach., 1-10. https://doi.org/10.1080/15397734.2020.1745646.
  169. Shariati, A., Ebrahimi, F., Hosseini, S.H.S., Toghroli, A. and Bayrami, S.S. (2020d), "On the nonlinear dynamics of viscoelastic graphene sheets conveying nanoflow: Parametric excitation analysis", Mech. Bas. Des. Struct. Mach., 1-18. https://doi.org/10.1080/15397734.2020.1728544.
  170. Shariati, A., Ebrahimi, F., Karimiasl, M., Selvamani, R. and Toghroli, A. (2020e), "On bending characteristics of smart magneto-electro-piezoelectric nanobeams system", Adv. Nano Res., 9(3), 183-191. https://doi.org/10.12989/anr.2020.9.3.183.
  171. Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020f), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., 8(1), 49-58. https://doi.org/10.12989/anr.2020.8.1.049.
  172. Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2021a), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 37(3), 1835-1850. https://doi.org/10.1007/s00366-019-00916-9.
  173. Shariati, A., Hosseini, S.H.S., Ebrahimi, F. and Toghroli, A. (2021b), "Nonlinear dynamics and vibration of reinforced piezoelectric scale-dependent plates as a class of nonlinear Mathieu-Hill systems: parametric excitation analysis", Eng. Comput., 37(3), 2285-2301. https://doi.org/10.1007/s00366-020-00942-y.
  174. Shariati, A., Qaderi, S., Ebrahimi, F. and Toghroli, A. (2020g), "On buckling characteristics of polymer composite plates reinforced with graphene platelets", Eng. Comput.,, 1-12. https://doi.org/10.1007/s00366-020-00992-2.
  175. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Various types of shear connectors in composite structurals: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.
  176. Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.
  177. Shariati, A., Sulong, N., Suhatril, M. and Shariati, M. (2012b), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604.
  178. Shariati, M. (2008a), "Assessment building using none-destructive test techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)", Universiti Putra Malaysia.
  179. Shariati, M., Armaghani, D.J., Khandelwal, M., Zhou, J. and Khorami, M. (2021c), "Assessment of longstanding effects of fly ash and silica fume on the compressive strength of concrete using extreme learning machine and artificial neural network", J. Adv. Eng. Comput., 5(1), 50-74. https://doi.org/10.25073/jaec.202151.308
  180. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  181. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473-484. https://doi.org/10.12989/gae.2020.19.6.473.
  182. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021d), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  183. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019c), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569
  184. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020i), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  185. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020j), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  186. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019e), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553 .
  187. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung Nguyen, T. (2020k), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  188. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020m), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  189. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020o), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.
  190. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020r), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183 .
  191. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., ... & Poi-Ngian, S. (2019g), "Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  192. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020u), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  193. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M. and Poi-Ngian, S. (2019i), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  194. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020v), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.
  195. Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019n), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225 .
  196. Shariati, M., Ramli Sulong, N. H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013a), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  197. Shariati, M., Ramli Sulong, N., Arabnejad Khanouki, M. and Shariati, A. (2011b), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural. Engineering and Mechanics (ASEM'11+), Seoul, South Korea.
  198. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010b). "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel Composite Structures, Sydney, July.
  199. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011c), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
  200. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  201. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016a), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  202. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011e), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  203. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012c), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  204. Shariati, M., Ramli-Sulong, N.H., Arabnejad, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Scientif. Res. Essay., 6(1), 213-220. https://doi.org/10.5897/sre10.879.
  205. Shariati, M., Shariati, A., Sulong, N.H.R., Suhatril, M. and Khanouki, M.M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  206. Shariati, M., Sulong, N.H.R. and Khanouki, M.M.A. (2012d), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  207. Shariati, M., Sulong, N.H.R., Shariati, A. and Kueh, A.B.H. (2016b), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  208. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2012e), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  209. Shariati, M., Sulong, N.H.R., Suhatril, M., Shariati, A., Khanouki, M.M.A. and Sinaei, H. (2013b), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  210. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018a), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166 https://doi.org/10.1016/j.engfailanal.2017.08.014.
  211. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020x), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237 .
  212. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017a), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  213. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019o), "Estimation of moment and rotation of steel rack connections using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  214. Sharma, S., Verma, A., Kumar, A. and Kamyab, H. (2018), "Magnetic nano-сomposites and their industrial applications", Nano Hybrid. Compos., 20, 149-172. https://doi.org/10.4028/www.scientific.net/NHC.20.149.
  215. Shi, T., Liu, Y., Zhang, Y., Lan, Y., Zhao, Q., Zhao, Y. and Wang, H. (2022), "Calcined attapulgite clay as supplementary cementing material: thermal treatment, hydration activity and mechanical properties", Int. J. Concrete Struct. Mater., 16(1), 1-10. https://doi.org/10.1186/s40069-022-00499-8.
  216. Shi, X., Karachi, A., Hosseini, M., Yazd, M.S., Kamyab, H., Ebrahimi, M. and Parsaee, Z. (2020), "Ultrasound wave assisted removal of Ceftriaxone sodium in aqueous media with novel nano composite g-C3N4/MWCNT/Bi2WO6 based on CCD-RSM model", Ultrason. Sonochem., 68, 104460. https://doi.org/10.1016/j.ultsonch.2019.01.018
  217. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  218. Sinaei, H., Shariati, M., Abna, A H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Scientif. Res. Essay., 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  219. Singh, J., Kumar, V., Kumar, P., Kumar, P., Yadav, K.K., Cabral-Pinto, M.M., Kamyab, H. and Chelliapan, S. (2021), "An experimental investigation on phytoremediation performance of water lettuce (Pistia stratiotes L.) for pollutants removal from paper mill effluent", Water Environ. Res., 93(9), 1543-1553. https://doi.org/10.1002/wer.1536.
  220. Sohel, K., Al-Jabri, K., Zhang, M. and Liew, J.R. (2018), "Flexural fatigue behavior of ultra-lightweight cement composite and high strength lightweight aggregate concrete", Constr. Build. Mater., 173, 90-100. https://doi.org/10.1016/j.conbuildmat.2018.03.276.
  221. Sohrabi, M., Kamyab, H., Janalizadeh, N. and Huyop, F.Z. (2012), "Bacterial desulfurization of organic sulfur compounds exist in fossil fuels", J. Pure Appl. Microbiol., 6(2), 717-729.
  222. Soltani, M., Kamyab, H. and El-Enshasy, H.A. (2013), "Molecular weight (Mw) and Monosaccharide composition (MC): Two major factors affecting the therapeutic action of polysaccharides extracted from Cordyceps sinensis", J. Pure Appl. Microbiol., 7(3), 1601-1613.
  223. Soni, A., Das, P.K., Hashmi, A.W., Yusuf, M., Kamyab, H. and Chelliapan, S. (2022), "Challenges and opportunities of utilizing municipal solid waste as alternative building materials for sustainable development goals: A review", Sustain. Chem. Pharm., 27, 100706. https://doi.org/10.1016/j.scp.2022.100706.
  224. Suhatril, M., Osman, N., Azura Sari, P., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geolog. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  225. Suresh, G., Balasubramanian, B., Ravichandran, N., Ramesh, B., Kamyab, H., Velmurugan, P., Siva, G.V. and Ravi, A.V. (2021), "Bioremediation of hexavalent chromium-contaminated wastewater by Bacillus thuringiensis and Staphylococcus capitis isolated from tannery sediment", Biomass Convers. Biorefin., 11(2), 383-391. https://doi.org/10.1007/s13399-020-01259-y.
  226. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N. and Tahir, M. (2016a), "Shear capacity of C-shaped and L-shaped angle shear connectors", PloS one, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.
  227. Talaiekhozani, A., Keyvanfar, A., Andalib, R., Samadi, M., Shafaghat, A., Kamyab, H., ... & Hussin, M.W. (2014), "Application of Proteus mirabilis and Proteus vulgaris mixture to design self-healing concrete", Desalin. Water Treat., 52(19-21), 3623-3630. https://doi.org/10.1080/19443994.2013.854092.
  228. Tavakkoli, O., Kamyab, H., Shariati, M., Mohamed, A.M. and Junin, R. (2022), "Effect of nanoparticles on the performance of polymer/surfactant flooding for enhanced oil recovery: A review", Fuel, 312, 122867. https://doi.org/10.1016/j.fuel.2021.122867.
  229. Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  230. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020a), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  231. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://doi.org/10.12989/scs.2014.17.5.623.
  232. Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M., Gharehaghaj, B. and Zandi, Y. (2020b), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct., 36(2), 213-228. http://doi.org/10.12989/scs.2020.36.2.213.
  233. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017). Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering- CSM 2017, Zurich, Switzerland.
  234. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Tonnizam Mohamad, E. and Khorami, M. (2018a), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. http://doi.org/10.12989/sss.2018.22.4.433.
  235. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 29(8), 1793-1801. http://doi.org/10.1007/s10845-016-1217-y.
  236. Topcu, I.B. and Isikdag, B. (2007), "Manufacture of high heat conductivity resistant clay bricks containing perlite", Build. Environ., 42(10), 3540-3546. https://doi.org/10.1016/j.buildenv.2006.10.016.
  237. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019a), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. http://doi.org/10.12989/sss.2019.24.3.415.
  238. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019b), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. http://doi.org/10.12989/sem.2019.70.5.639.
  239. Vasseghian, Y., Le, V.T., Joo, S.W., Dragoi, E.N., Kamyab, H., Chelliapan, S. and Klemes, J.J. (2022), "Spotlighting graphene-based catalysts for the mitigation of environmentally hazardous pollutants to cleaner production: A review", J. Clean. Prod., 365, 132702. https://doi.org/10.1016/j.jclepro.2022.132702.
  240. Velu, M., Balasubramanian, B., Velmurugan, P., Kamyab, H., Ravi, A.V., Chelliapan, S., Lee, C.T. and Palaniyappan, J. (2021), "Fabrication of nanocomposites mediated from aluminium nanoparticles/Moringa oleifera gum activated carbon for effective photocatalytic removal of nitrate and phosphate in aqueous solution", J. Clean. Prod., 281, 124553. https://doi.org/10.1016/j.jclepro.2020.124553.
  241. Wang, X., Wu, S., Yin, J., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022a), "On the electromechanical energy absorption of the reinforced composites piezoelectric MEMS via Adaptive neuro-fuzzy inference system and MCS theory", Compos. Struct.,, 116246. https://doi.org/10.1016/j.compstruct.2022.116246.
  242. Wang, X., Yang, Y., Yang, R. and Liu, P. (2022b), "Experimental analysis of bearing capacity of basalt fiber reinforced concrete short columns under axial compression", Coating., 12(5), 654. https://doi.org/10.3390/coatings12050654.
  243. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022c), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech.-A/Solid., 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  244. Wang, Z., Wang, Q., Jia, C. and Bai, J. (2022d), "Thermal evolution of chemical structure and mechanism of oil sands bitumen", Energy, 123190. http://doi.org/10.1016/j.energy.2022.123190.
  245. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M., Tahir, M. and Khorami, M. (2018a), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. http://doi.org/10.12989/scs.2018.27.3.389.
  246. Wu, Z., Xu, J., Li, Y. and Wang, S. (2022), "Disturbed state concept-based model for the uniaxial strain-softening behavior of fiber-reinforced soil", Int. J. Geomech., 22(7), 04022092. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002415.
  247. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441. http://doi.org/10.12989/scs.2019.30.5.433.
  248. Xu, H., Wang, X.Y., Liu, C.N., Chen, J.N. and Zhang, C. (2021a), "A 3D root system morphological and mechanical model based on L-Systems and its application to estimate the shear strength of root-soil composites", Soil Tillage Res., 212, 105074. http://doi.org/10.1016/j.still.2021.105074.
  249. Xu, J., Wu, Z., Chen, H., Shao, L., Zhou, X. and Wang, S. (2021b), "Study on strength behavior of basalt fiber-reinforced loess by digital image technology (DIT) and scanning electron microscope (SEM)", Arab. J. Sci. Eng., 46(11), 11319-11338 https://doi.org/10.1007/s13369-021-05787-1.
  250. Yadav, V.K., Yadav, K.K., Alam, J., Cabral-Pinto, M., Gnanamoorthy, G., Alhoshan, M., ... & Shukla, A.K. (2021), "Transformation of hazardous sacred incense sticks ash waste into less toxic product by sequential approach prior to their disposal into the water bodies", Environ. Sci. Pollut. Res., 1-13. https://doi.org/10.1007/s11356-021-15009-8.
  251. Yadav, V.K., Yadav, K.K., Gnanamoorthy, G., Choudhary, N., Khan, S.H., Gupta, N., Kamyab, H. and Bach, Q.V. (2020), "A novel synthesis and characterization of polyhedral shaped amorphous iron oxide nanoparticles from incense sticks ash waste", Environ. Technol. Innov., 20, 101089. https://doi.org/10.1016/j.eti.2020.101089.
  252. Yalgin, S. (1983), "Using expended perlite in construction sector", Etibank, Ankara, April.
  253. Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L., ... & Sidik, A.B.C. (2021a), "Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil", Clean Technol. Environ. Policy, 1-10. http://doi.org/10.1007/s10098-021-02113-z.
  254. Yavari, S., Kamyab, H., Asadpour, R., Yavari, S., Bin Sapari, N., Baloo, L., Abd Manan, T.S.B., Ashokkumar, V. and Chelliapan, S. (2021b), "The fate of imazapyr herbicide in the soil amended with carbon sorbents", Biomass Convers. Biorefin., 1-9. http://doi.org/10.1007/s13399-021-01587-7.
  255. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  256. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018a), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. http://doi.org/10.12989/scs.2018.28.4.439
  257. Zhang, W. and Tang, Z. (2021a), "Numerical modeling of response of CFRP-Concrete interfaces subjected to fatigue loading", J. Compos. Constr., 25(5), 04021043. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001154.
  258. Zhang, W., Tang, Z., Yang, Y., Wei, J. and Stanislav, P. (2021b), "Mixed-mode debonding behavior between CFRP plates and concrete under fatigue loading", J. Struct. Eng., 147(5), 04021055. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003032.
  259. Zhou, L., Kamyab, H., Surendar, A., Maseleno, A., Ibatova, A Z., Chelliapan, S., Karachi, N. and Parsaee, Z. (2019), "Novel Z-scheme composite Ag2CrO4/NG/polyimide as high performance nano catalyst for photoreduction of CO2: Design, fabrication, characterization and mechanism", J. Photochem. Photobiol. A: Chem., 368, 30-40. https://doi.org/10.1016/j.jphotochem.2018.09.006.
  260. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.