Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Polymer Post-treatment on the Durability of 3D-printed Cement Composites

3D 프린터로 출력된 시멘트 복합체의 내구성에 미치는 폴리머 후처리의 영향

  • 서지석 ((재)한국건설생활환경시험연구원) ;
  • 현창진 (충남대학교, 토목공학과) ;
  • 김윤용 (충남대학교, 토목공학과)
  • Received : 2022.06.30
  • Accepted : 2022.09.19
  • Published : 2022.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, in order to improve the durability of the cement composite printed with the ME type 3D printer, PDMS, sodium silicate, and a surface hardener were employed. Post-treatment was performed on 3D-printed cement composite by coating after immersion, and the degree of improvement in durability was evaluated. As a result, in all evaluations, the durability performances of the post-processed specimens were improved compared to those of the plain specimens. Water absorption resistance, chloride penetration resistance, and carbonation resistance of the PDMS treated specimens were improved by 36.3 %, 77.1 %, and 50.4 % when compared to plain specimens. Freeze-thaw resistance of the specimens treated with sodium silicate was found to be the most excellent, with an average enhancement of 47.5% compared to plain specimens. It was found that PDMS was the most efficient post-treatment materials for 3D-printed cement composite. However, as suggested in this study, the post-treatment method by coating after immersion may not be applicable to cement composite structures printed with a 3D printer in field. Therefore, a follow-up study needs to be preformed on the durability enhancing materials suitable for 3D printing.

이 연구에서는 ME 방식 3D 프린터로 출력한 시멘트 복합체의 내구성을 개선하기 위해 PDMS, 규산나트륨, 표면강화재를 침지 후 도포하는 방식으로 후처리 하였으며 각각의 내구성 개선 정도를 평가하였다. 그 결과, 모든 평가에서 후처리 한 시험체의 내구성능이 그렇지 않은 시험체에 비해 내구성이 개선되는 경향을 나타냈다. 내흡수성과 염소이온 침투 저항성, 탄산화 저항성의 경우 PDMS로 후처리 했을 때 후처리 하지 않은 시험체에 비해 각각 평균 36.3 %, 77.1 %, 50.4 % 개선되어 가장 우수한 것으로 나타났으며 내동해성의 경우 규산나트륨으로 후처리 했을 때 평균 47.5 % 개선되어 가장 우수한 것으로 나타났다. 3D 프린팅용 시멘트 복합체의 후처리 용액 중 대체로 PDMS가 우수한 것으로 나타났으나 이 연구에서 제안한 바와 같이 침지 후 도포하는 후처리 방식은 3D 프린터로 출력한 시멘트 복합체 구조물에 실질적으로 적용하기 어려울 수 있으므로 시공성을 고려한 성능개선재료에 대한 후속 연구가 필요할 것으로 판단된다.

Keywords

Acknowledgement

이 논문은 2020년도 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(NRF-2020R1A2C1101465).

References

  1. Chen, M., Li, L., Zheng, Y., Zhao, P., Lu, L., and Cheng, X. (2018), Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials, The Journal of Construction and Building materials, 189, 601-611. https://doi.org/10.1016/j.conbuildmat.2018.09.037
  2. Seo, J. S., Lee, B. C., and Kim, Y. Y. (2019), The Effects of Void Ratio on Extrudability and Buildability of Cement-based Composites Produced by 3D Printers, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(7), 104-112. (in Korean). https://doi.org/10.11112/JKSMI.2019.23.7.104
  3. Kruger, J., du Plessis, A., and van Zijl, G. (2021), An investigation into the porosity of extrusion-based 3D printed concrete, Additive Manufacturing, 37, 101740. https://doi.org/10.1016/j.addma.2020.101740
  4. Seo, E. A., Lee, H. J., and Yang, K. H. (2021), Strength Characteristics of 3D Printed Composite Materials According to Lamination Patterns, Journal of the Korea Institute for Structural Maintenance and Inspection, 25(6), 193-198. (in Korean). https://doi.org/10.11112/JKSMI.2021.25.6.193
  5. Liu, C., Zhang, R., Liu, H., He, C., Wang, Y., Wu, Y., and Zuo, F. (2022), Analysis of the mechanical performance and damage mechanism for 3D printed concrete based on pore structure.
  6. Park, K. M., Park. S. H., Lee, B. C., and Roh, Y. S. (2020), Evaluation of Binder Jetting 3D Printed Specimens Using Vacuum Impregnation, Journal of the Korea Institute for Structural Maintenance and Inspection, 24(2), 103-110. (in Korean). https://doi.org/10.11112/JKSMI.2020.24.2.103
  7. Rehman, A. U., and Kim, J. H. (2021), 3D concrete printing: A systematic review of rheology, mix designs, mechanical, microstructural, and durability characteristics, Materials, 14(14), 3800. https://doi.org/10.3390/ma14143800
  8. Wang, K., Wi, K., Laflamme, S., Sritharan, S., Taylor, P., and Qin, H. (2020), Feasibility Study of 3D Printing of Concrete for Transportation Infrastructure. Final Report, Institute for Transportation, Iowa State University, Ames, IA.
  9. Ishida, T., Maekawa, K., and Kishi, T. (2007), Enhanced modeling of moisture equilibrium and transport in cementitious materials under arbitrary temperature and relative humidity history, Cement and Concrete Research, 37(4), 565-578. https://doi.org/10.1016/j.cemconres.2006.11.015
  10. Mabrouk, R., Ishida, T., and Maekawa, K. (2004), A unified solidification model of hardening concrete composite for predicting the young age behavior of concrete, Cement and Concrete Composites, 26(5), 453-461. https://doi.org/10.1016/S0958-9465(03)00073-8
  11. Al-Zahrani, M. M., Al-Dulaijan, S. U., Ibrahim, M., Saricimen, H., and Sharif, F. M. (2002), Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete, Cement and Concrete Composites, 24(1), 127-137. https://doi.org/10.1016/S0958-9465(01)00033-6
  12. Park, M. J., Lee, B. J., Kim, J. S., and Kim, Y. Y., (2018), Effect of Concrete Strength on Chlordie Ion Penetration Resistance and Chemical Resistance of Concrete Coated by Silopxane-based Water Repellent, Journal of the Korea Concrete Institute, 30(6), 533-590. (in Korean). https://doi.org/10.4334/JKCI.2018.30.5.533
  13. Lee, J., Lee, B. C., Cho, Y. G., and Jung, S. H., (2016), Chloride Diffusivity of Concrete using Recycled Aggregate by Strength Levels, Journal of the Korea Institute for Structural Maintenance and Inspection, 20(2), 102-109. (in Korean). https://doi.org/10.11112/JKSMI.2016.20.2.102
  14. Asami, K., and Kikuchi, M. (2003), In-depth distribution of rusts on a plain carbon steel and weathering steels exposed to coastal-industrial atmosphere for 17 years, Corrosion Science, 45(11), 2671-2688. https://doi.org/10.1016/S0010-938X(03)00070-2
  15. Ohtsu, M., and Yosimura, S. (1997), Analysis of crack propagation and crackinitiation due to corrosion of reinforcement, Construction and Building Materials, 11(7-8), 437-442. https://doi.org/10.1016/S0950-0618(97)00020-2
  16. Lee, B. J., Lee, J., and Kim, Y. Y. (2017), Durability Performance of Concrete Penetrated and Coated by Polydimethylsiloxane for Penetrating Water Repellency, Journal of the Korea Concrete Institute, 29(6), 607-613. (In Korean). https://doi.org/10.4334/JKCI.2017.29.6.607
  17. Cui, H., Tang, W., Liu, W., Dong, Z., and Xing, F. (2015), Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms, Construction and Building Materials, 93, 522-527. https://doi.org/10.1016/j.conbuildmat.2015.06.007
  18. Park, K. M., Min, K. S., Lee, B. C., and Roh, Y. S. (2021), Proposal for enhancing the compressive strength of alkali-activated materials-based binder jetting 3D printed outputs, Construction and Building Materials, 303, 124377. https://doi.org/10.1016/j.conbuildmat.2021.124377
  19. Lee, J. H., Hyun, J. H., Park, S. H., and Kim, Y. Y.. (2018), Compressive Strength and Chloride Ion Penetration Resistance of SHCC Coated by PDMS-based Penetrating Water Repellency, Journal of the Korea Institute for Structural Maintenance and Inspection, 22(6), 16-23. (in Korean). https://doi.org/10.11112/JKSMI.2018.22.6.016
  20. Wang, F., Lei, S., Ou, J., and Li, W. (2020), Effect of PDMS on the waterproofing performance and corrosion resistance of cement mortar, Applied Surface Science, 507, 145016. https://doi.org/10.1016/j.apsusc.2019.145016
  21. Khunthongkeaw, J., and Tangtermsirikul, S. (2005), Model for simulating carbonation of fly ash concrete, Journal of Materials in Civil Engineering, 17(5), 570-578. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:5(570)