Material Properties Depending on the Maximum Aggregate Size and Fineness Modulus for Concrete Repair Materials

콘크리트 단면복구용 보수재료의 굵은 골재 최대치수 및 조립률에 따른 재료적 특성

Re-damage is frequently occurring for various reasons, including material factors, external factors, and factors caused by poor construction in concrete cross-section restoration work, so it is necessary to identify the cause and improve it. Cement-based materials are the most commonly used maintenance materials for concrete structures, and in particular, additional cross-sectional restoration work may be carried out due to re-damage such as cracks and excitement due to dry contraction of the repair material. In this study, a basic study was conducted to identify the characteristics of concrete while diversifying the maximum dimensions and assembly rate of thick aggregates to examine the effects of using thick aggregates in repair materials. As a result, the slump of concrete increased as the maximum size of thick aggregates increased, and the amount of air content was measured 1.88 to 2.35 times higher in the mixing using aggregates with a maximum aggregate size of 5 mm or more compared to the mixing group with a maximum aggregate size of 10 mm or more. It was found that compressive strength was greatly affected by the performance rate of thick aggregates. The compressive strength was measured the highest in the mixture using thick aggregates with the highest performance rate of 20 mm, and the compressive strength of the mixture with the lowest performance rate was more than 45%. As a result of the dry shrinkage measurement, the dry shrinkage was the lowest as the performance rate of the thick aggregate increased according to the change in the maximum dimensions and assembly rate of the thick aggregate, and the lowest performance rate was the largest in the mix. Through this study, it was confirmed that adjusting the particle size by diversifying the maximum dimensions and assembly rate of thick aggregates used in concrete structure repair materials can improve strength and workability and reduce dry shrinkage.

본 연구에서는 보수재료에 굵은 골재를 사용하게 되면서 얻을 수 있는 효과를 검토하기 위해 굵은 골재의 최대치수 및 조립률을 다양화 하면서 콘크리트의 특성을 파악하는 기초 연구를 수행하였다. 그 결과 콘크리트의 슬럼프는 굵은 골재 최대치수가 커질수록 증가하였고, 공기량은 최대 골재 치수가 10 mm 이상인 배합군에 비해 최대 골재 치수가 5 mm 의 골재를 사용한 배합에서 공기량이 1.88~2.35 배 높게 측정되었다. 압축강도는 굵은 골재의 실적률에 많은 영향을 받는 것으로 나타났다. 실적률이 가장 높은 최대치수 20 mm 의 굵은 골재를 사용한 배합에서 압축강도가 가장 높게 측정되었으며 실적률이 가장 낮은 배합의 압축강도보다 45% 이상 높게 나타났다. 건조수축 측정결과 굵은 골재 최대치수 및 조립률의 변화에 따라 굵은 골재의 실적률이 높아지면서 건조 수축이 가장 낮게 측정되었고, 실적률이 가장 낮은 배합에서 가장 크게 나타났다. 본 연구를 통해 콘크리트 구조물 보수용 재료에 사용되는 굵은 골재의 최대치수 및 조립률을 다양화해서 입도를 조정하게 되면 강도 및 작업성이 우수해지고 건조수축을 줄일 수 있는 것을 확인 할 수 있었다.