DOI QR코드

DOI QR Code

Implementation of Optimal Temperature Controller for Thermoelectric Device-based Heating System Using Genetic Algorithm

유전알고리즘을 이용한 열전소지 기반 히팅 시스템의 최적 온도 제어기 구현

  • Jung-Shik Kong (Department of Mechanical Engineering, Induk University)
  • 공정식 (인덕대학교 기계공학과)
  • Received : 2023.08.08
  • Accepted : 2023.09.30
  • Published : 2023.09.30

Abstract

This paper presents the development of a controller that can control the temperature of an heating system based on a thermoelectric module. Temperature controller using Peltier has various external factors such as external temperature, characteristics of an aluminum plate, installation location of temperature sensors, and combination method between the aluminum plate and heating element. Therefore, it is difficult to apply the simulation and simulation results of heating system using Peltier at control algorithm. In general, almost temperature controller is using PID algorithm that finds control gain value heuristically. In this paper, it is proposed mathematical model that explain correlate between the temperature of the heating system and input voltage. And then, optimal parameter of estimated thermal model of the aluminum plate are searched by using genetic algorithm. In addition, based on this estimated model, the optimal PID control gain are inferred using a genetic algorithm. All of the sequence are simulated and verified with proposed real system.

Keywords

References

  1. A A Pugachev and N Strekalov, "Themperature Control of Power Semiconductor devices in Traction Applications", IOP Conf. Series: Materials Science and Engineering 177, pp. 1-6, 2017. https://doi.org/10.1088/1757-899X/177/1/012141
  2. Amruta Patil-Joshi, B.E. Rangaswamy, and Anjali Apte-Deshpande "Paper-based PCR Method Develpment, Validation and Application for Microbial Detection", Journal of Genetic Engineering and Biotechnology, 2021.
  3. S.Y. Yoo, "A Study on The Performance of Thermoelectric Module and Thermoelectric Cooling System", The Society of Air-Conditioning and Refrigerating Engineers of Korea, Vol. 16, no 1, pp. 62-69, 2004.
  4. J. G. Stockholm, "Current State of Peltier Cooling", Proceedings of the 16th International Gerhard Wiegleb and J. Heitbaum, "Semiconductor gas sensor for detecting NO and CO traces in ambient air of road traffic", Sensors and Actuators B: Chemical, Vol. 17, Issue 2, pp. 93-99, 1994. https://doi.org/10.1016/0925-4005(94)87035-7
  5. R. Chein and G. Huang, "Thermo-electric cooler application in electronic cooling", Applied Thermal Engineering, Vol. 24, pp. 2207-2217, 2004.
  6. S. Dilhaire, A. Salhi, G. Grauby and W. Claeys, "Laser Seebeck Effect Imaging(SEI) and Peltier Effect Imaging(PEI): Complementary Investigation Methods", Microelectronics Reliability, Vol. 43, pp. 1609-1614, 2003. https://doi.org/10.1016/S0026-2714(03)00282-8
  7. S. Y. Lee, S. Jang, M Park and C. Yoon, "Circuit Modeling and Simulation for Thermoelectric Cooling System using Condensed Water", Journal of Korean Institute of Intelligent Systems, Vol. 25, No. 2, pp. 161-167, 2015. https://doi.org/10.5391/JKIIS.2015.25.2.161
  8. J.E. Beasley, P.C. Chu, "A genetic algorithm for the set covering problem", European Journal of Operational Research, Vol. 94, No. 2, pp 392-404, 1996. https://doi.org/10.1016/0377-2217(95)00159-X
  9. Manosij Ghosh, Ritam Guha, Imran Alam, Priyank Lohariwal, Devish Jalan and Ram Sarkar, "Binary Genetic Swarm Optimization: A Combination of GA and PSO for Feature Selection", Journal of Intelligent Systems, Vol. 29, No. 1, pp. 1598-1610, 2020.