Abstract
In this study, natural surfactants were extracted from Medicago sativa L. The O/W emulsification processes with the extracted natural surfactants were optimized using central composite design model-response surface methodology (CCD-RSM) and a 95% confidence interval was used to confirm the reasonableness of the optimization. Herein, independent parameters were the ratio of saponins to total surfactant (P), amount of surfactant (W), and emulsification speed (R), whereas the reaction parameters were the emulsion stability index (ESI), mean droplet size (MDS), and viscosity (V). Using the multiple reaction, the optimal conditions for the ratio of saponins to total surfactant, amount of surfactant, and emulsification speed for O/W emulsification were 49.5%, 9.1 wt%, and 6559.5 rpm, respectively. Under these optimal conditions, the expected values of ESI, MDS, and V as the reaction parameters were 89.9%, 1058.4 nm, and 1522.5 cP, respectively. The values of ESI, MDS, and V from these expected values were 88.7%, 1026.4 nm, and 1486.5 cP, respectively, and the average experimental error for validating the accuracy was about 2.3 (± 0.4)%. Therefore, it was possible to design an optimization process for evaluating the O/W emulsion process with Medicago sativa L. using CCD-RSM.
본 연구에서는 알팔파로부터 추출한 천연계면활성제를 사용하여 중심합성설계모델(CCD-RSM)을 이용한 O/W 유화제조 공정의 최적화를 수행하였다. 그 결과 95% 신뢰구간에서 최적화 결과의 통계학적 합리성을 확인하였다. CCD-RSM을 통하여 독립변수인 알팔파 추출물:Sugar ester S-370의 혼합비율(P), 계면활성제의 첨가량(W) 및 유화속도(R)가 반응치인 유화안정도지수(ESI), 평균입자크기(MDS) 및 점도(V)에 끼치는 영향을 조사하여 O/W 유화제조공정의 최적조건을 산출하였다. 유화안정도지수, 평균입자크기 및 점도에 관한 회귀방정식으로부터 다중반응을 수행하여 3가지 반응치를 동시에 만족하는 최적 유화조건으로 알팔파 추출물:Sugar ester S-370의 혼합비율은 49.5 wt%, 계면활성제의 첨가량 9.1 wt%, 유화속도 6559.5 rpm으로 나타났으며 산출된 반응치의 응답값은 ESI는 89.9%, MDS는 1058.4 nm, V는 1522.5 cP로 산출되었다. 이를 실험으로 확인한 결과 ESI는 88.7%, MDS는 1026.4 nm, V는 1486.5 cP이었으며 평균 오차율은 2.3 (± 0.4)%이었다. 따라서 CCD-RSM을 실제 유화 제조에 적용하여 만족스러운 O/W 유화제조 공정조건을 얻을 수 있었다.