Advances in nano research

  • 제14권5호
  • /
  • Pages.451-461
  • /
  • 2023
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A design of tuning band and structure to generate diverse properties by stretching

  • Ruqi Wang (College of Chemistry and Chemical Engineer, Lanzhou University) ;
  • Ruoyun Li (Institute of Biochemistry and Molecular Biology, School of Life Sciences, Lanzhou University)
  • 투고 : 2022.02.06
  • 심사 : 2022.06.28
  • 발행 : 2023.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Two-dimensional (2D) materials have been attracting attention since graphene monolayer was firstly separated. However, after an explosive boom, there is always quandary and stagnancy following and soon will come the refractory period of capital market. To avoid that undesired future, a paradigm of quasi 2D monolayer has been contemplated and devised in this article, with examples studied theoretically. The results show the general dynamic nonlinearity, and the expected tunability of bandgap without extra doping or substitution. These together suggest its intriguing both electronical and mechanical properties, which will enrich the arsenal of potential 2D materials.

키워드

참고문헌

  1. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343
  2. Bartol, T.M., Cailey, B., Justin, K., Chirillo, M.A., Bourne, J.N., Harris, K.M. and Sejnowski, T.J. (2015), "Nanoconnectomic upper bound on the variability of synaptic plasticity", eLife Sci., 4. https://doi.org/10.7554/eLife.10778
  3. Bohn, R.K. and Haaland, A. (1966), "On the molecular structure of ferrocene, Fe(C5H5)2", J. Organometall. Chem., 5(5), 470-476. https://doi.org/10.1016/S0022-328X(00)82382-7
  4. Borders, W.A., Pervaiz, A.Z., Fukami, S., Camsari, K.Y. and Datta, S. (2019), "Integer factorization using stochastic magnetic tunnel junctions", Nature, 573(7774), 390-393. https://doi.org/10.1038/s41586-019-1557-9
  5. Cao, Y., Fatemi, V., Fang, S., Watanabe, K., Taniguchi, T., Kaxiras, E. and Jarillo-Herrero, P. (2018), "Unconventional superconductivity in magic-angle graphene superlattices", Nature, 556. https://doi.org/10.1038/nature26160
  6. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 115195. https://doi.org/10.1016/j.compstruct.2022.115195
  7. Dai, H. and Safarpour, H. (2021), "Frequency and thermal buckling information of laminated composite doubly curved open nanoshell", Adv. Nano Res., 10(1), 1-14. https://doi.org/10.12989/anr.2021.10.1.001
  8. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175
  9. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound. Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017
  10. Duong, D.L., Lee, S.M., Chae, S.H., Ta, Q.H., Lee, S.Y., Han, G.H., Bae, J.J. and Lee, Y.H. (2012), "Band-gap engineering in chemically conjugated bilayer graphene: Ab initio calculations", Phys. Rev. B, 85(20), 45-51. https://doi.org/10.1103/PhysRevB.85.205413
  11. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4
  12. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9
  13. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct., 47(5), 521-545. https://doi/10.1080/15397734.2019.1566743
  14. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518
  15. Forsat, M., Musharavati, F., Eltai, E., Zain, A.M., Mobayen, S. and Mohamed, A.M. (2021), "Vibration characteristics of microplates with GNPs-reinforced epoxy core bonded to piezoelectric-reinforced CNTs patches", Adv. Nano Res., 11(2), 115-140. https://doi.org/10.12989/anr.2021.11.2.115
  16. Gao, T., Zhang, Y., Li, C., Wang, Y., An, Q., Liu, B., Said, Z. and Sharma, S. (2021), "Grindability of carbon fiber reinforced polymer using CNT biological lubricant", Sci. Rep., 11(1), 1-14. https://doi.org/10.1038/s41598-021-02071-y
  17. Geisz, J.F., France, R.M., Schulte, K.L., Steiner, M.A. and Moriarty, T. (2020), "Six-junction III-V solar cells with 47.1% conversion efficiency under 143 Suns concentration", Nature Energy, 5(4), 326-335. https://doi.org/10.1038/s41560-020-0598-5
  18. Ghamkhar, M., Khadimallah, M.A., Iqbal, M.Z., Hussain, M., Yahya, A., Khedher, K.M., Naeem, M.N. and Tounsi, A. (2021), "Performance of FGM bilayered cylindrical shell placed on cantilever edge", Adv. Nano Res., 11(4), 339-345. https://doi.org/10.12989/anr.2021.11.4.339
  19. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310
  20. Guinea, F., Katsnelson, M.I. and Geim, A.K. (2009), "Energy gaps and a zero-field quantum Hall effect in graphene by strain engineering", Nature Phys., 6(1), 30-33. https://doi.org/10.1038/nphys1420
  21. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4
  22. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664
  23. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7
  24. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(8), 625-636. https://doi.org/10.1177/1464420716642258
  25. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  26. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Proc., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  27. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNP-reinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x
  28. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 1-30. https://doi.org/10.1080/15397734.2019.1701490.
  29. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct., 1-19. https://doi.org/10.1080/15397734.2019.1697932
  30. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125
  31. Hailong, D., Dan, L., Shaohui, Z. and Yongping, Z. (2018), "A facile approach to synthesize graphitic carbon nitride microwires for enhanced photocatalytic H2 evolution from water splitting under full solar spectrum", Catal. Sci. Technol., 8, 3599-3609. https://doi.org/10.1039/C8CY00904J
  32. Hammer, B., Hansen, L.B. and Norskov, J.K. (1999), "Improved adsorption energetics within density-functional theory using revised Perdew-Burke-Ernzerhof functionals", Phys. Rev. B, 59, 7413. https://doi.org/10.1103/PhysRevB.59.7413
  33. Han, M.Y., Oezyilmaz, B., Zhang, Y. and Kim, P. (2007), "Energy band gap engineering of graphene nanoribbons", Phys. Rev. Lett., 98(20), 206805. https://doi.org/10.1103/PhysRevLett.98.206805
  34. Hao, R.B., Lu, Z.Q., Ding, H. and Chen, L.Q. (2022), "A nonlinear vibration isolator supported on a flexible plate: analysis and experiment", Nonlinear Dyn., 108(2), 941-958. https://doi.org/10.1007/s11071-022-07243-7
  35. He, X., Wu, Z., Xue, Y., Gao, Z. and Yang, X. (2019), "Fabrication of interlayer β-CD/g-C3N4@MoS2 for highly enhanced photodegradation of glyphosate under simulated sunlight irradiation", RSC Adv., 9. https://doi.org/10.1039/C8RA10190F
  36. Hong, T., Guo, S., Jiang, W. and Gong, S. (2021), "Highly selective frequency selective surface with ultrawideband rejection", IEEE T Antennas Propagat., 70(5), 3459-3468. https://doi.org/10.1109/TAP.2021.3137453
  37. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  38. Huang, X., Zeng, Z. and Zhang, H. (2013), "Metal dichalcogenide nanosheets: preparation, properties and applications", Chem. Soc. Rev., 42(5), 1934-1946. https://doi.org/10.1039/C2CS35387C
  39. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021a), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7
  40. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021b), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y
  41. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x
  42. Jiao, Y., Ma, F., Gao, G., Bell, J., Frauenheim, T. and Du, A. (2015), "Versatile single-layer sodium phosphidostannate(ii): strain-tunable electronic structure, excellent mechanical flexibility, and an ideal gap for photovoltaics", J. Phys. Chem. Lett., 6(14), 2682-2687. https://doi.org/10.1021/acs.jpclett.5b01136
  43. Khadimallah, M.A., Hussain, M., Naeem, M.N., Taj, M. and Tounsi, A. (2021a), "Monitoring and control of multiple fraction laws with ring based composite structure", Adv. Nano Res., 10(2), 129-138. https://doi.org/10.12989/anr.2021.10.2.129
  44. Khadimallah, M.A., Hussain, M., Taj, M., Ayed, H. and Tounsi, A. (2021b), "Parametric vibration analysis of single-walled carbon nanotubes based on Sanders shell theory", Adv. Nano Res., 10(2), 165-174. https://doi.org/10.12989/anr.2021.10.2.165
  45. King, R.R., Law, D.C., Edmondson, K.M., Fetzer, C.M., Kinsey, G.S., Yoon, H., Sherif, R.A. and Karam, N.H. (2007), "40% efficient metamorphic GaInP∕GaInAs∕Ge multijunction solar cells", Appl. Phys. Lett., 90(18), 510. https://doi.org/10.1063/1.2734507
  46. Kumar, Y., Gupta, A. and Tounsi, A. (2021), "Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model", Adv. Nano Res., 11(1), 1-17. https://doi.org/10.12989/anr.2021.11.1.001
  47. Li, J., Shan, Z.-W. and Ma, E. (2014a), "Elastic strain engineering for unprecedented materials properties", MRS Bull., 39, 108-114. https://doi.org/10.1557/mrs.2014.3
  48. Li, L., Yu, Y., Ye, G.J., Ge, Q., Ou, X., Wu, H., Feng, D., Chen, X.H. and Zhang, Y. (2014b), "Black phosphorus field-effect transistors", Nature Nanotechnol., 9(5), 372-377. https://doi.org/10.1038/nnano.2014.35
  49. Lin, K.Y.A. and Lin, J.T. (2017), "Ferrocene-functionalized graphitic carbon nitride as an enhanced heterogeneous catalyst of Fenton reaction for degradation of Rhodamine B under visible light irradiation", Chemosphere, 182, 54-64. https://doi.org/10.1016/j.chemosphere.2017.04.152
  50. Liu, J., Xie, C., Dai, X., Jin, L., Zhou, W. and Lieber, C.M. (2013), "Multifunctional three-dimensional macroporous nanoelectronic networks for smart materials", Proceedings of the National Academy of Sciences of the United States of America, 110(17), 6694-6699. https://doi.org/10.1073/pnas.1305209110
  51. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  52. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. https://doi.org/10.1080/15397734.2020.1784201
  53. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech. A Solids, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581
  54. Ma, L., Liu, X. and Moradi, Z. "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9
  55. Madenci, E. (2021), "Free vibration analysis of carbon nanotube RC nanobeams with variational approaches", Adv. Nano Res., 11(2), 157-171. https://doi.org/10.12989/anr.2021.11.2.157
  56. Makov, G. and Payne, M.C. (1995), "Periodic boundary conditions in ab initio calculations", Phys. Rev. B, 51(7), 4014. https://doi.org/10.1103/PhysRevB.51.4014
  57. Mccann, E. (2007), "Interlayer asymmetry gap in the electronic band structure of bilayer graphene", Physica Status Solidi, 244. https://doi.org/10.1002/pssb.200776105
  58. Merindol, R. and Walther, A. (2017), "Materials learning from life: Concepts for active, adaptive and autonomous molecular systems", Chem. Soc. Rev., 46(18), 5588-5619. https://doi.org/10.1039/C6CS00738D
  59. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustainability, 14(8), 4752. https://doi.org/10.3390/su14084752
  60. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1926572
  61. Naumis, G.G., Barraza-Lopez, S., Oliva-Leyva, M. and Terrones, H. (2017), "Electronic and optical properties of strained graphene and other strained 2D materials: A review", Reports Prog. Phys. Phys. Soc., 80(9), 096501. https://doi.org/10.1088/1361-6633/aa74ef
  62. Novoselov, K.S., Geim, A.K., Morozov, S.V., Jiang, D., Zhang, Y., Dubonos, S.V., Grigorieva, I.V. and Firsov, A.A. (2004), "Electric field effect in atomically thin carbon films", Science, 306(5696), 666-669. https://doi.org/10.1126/science.1102896
  63. O'Connor, J.M. and Casey, C.P. (1987), "Ring-slippage chemistry of transition metal cyclopentadienyl and indenyl complexes", Chem. Rev., 87(2), 307-318. https://doi.org/10.1021/cr00078a002
  64. Pederson, M.R. and Jackson, K.A. (1991), "Pseudoenergies for simulations on metallic systems", Phys. Rev. B Condens. Matter., 43(9), 7312-7315. https://doi.org/10.1103/PhysRevB.43.7312
  65. Peng, Y., Zhang, L., Li, Z., Zhong, S., Liu, Y., Xie, S. and Luo, J. (2022), "Influences of wire diameters on output power in electromagnetic energy harvester", Int. J. Precis. Eng. Manuf. Green Technol., 1-12. https://doi.org/10.1007/s40684-022-00446-8
  66. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  67. Rocha, A.R., Garcia-Suarez, V.M., Bailey, S.W., Lambert, C.J. and Sanvito, S. (2006), "Spin and molecular electronics in atomically generated orbital landscapes", Phys. Rev. B, 73(8), 085414 . https://doi.org/10.1103/PhysRevB.73.085414
  68. Roldan, R., Castellanos-Gomez, A., Cappelluti, E. and Guinea, F. (2015), "Strain engineering in semiconducting two-dimensional crystals", J. Phys. Conden. Matter., 27(31), 313201. https://doi.org/10.1088/0953-8984/27/31/313201
  69. Rungger, I. and Sanvito, S. (2008), "Algorithm for the construction of self-energies for electronic transport calculations based on singularity elimination and singular value decomposition", Phys. Rev. B, 78(3), 1436-1446. https://doi.org/10.1103/PhysRevB.78.035407
  70. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  71. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A size-dependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  72. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical three-dimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465
  73. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-00949-5
  74. Schwierz, F. (2010), "Graphene transistors", Nature Nanotechnol., 5(7), 487-496. https://doi.org/10.1038/nnano.2010.89
  75. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng.. 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3
  76. Shariati, M., Kamyab, H., Habibi, M., Ahmadi, S., Naghipour, M., Gorjinezhad, F., Mohammadirad, S and Aminian, A. (2023), "Sulfuric acid resistance of concrete containing coal waste as a partial substitute for fine and coarse aggregates", Fuel, 348, 128311. https://doi.org/10.1016/j.fuel.2023.128311
  77. Sharma, P., Ganti, S. and Bhate, N. (2003), "Effect of surfaces on the size-dependent elastic state of nano-inhomogeneities", Appl. Phys. Lett., 82(4), 535-537. https://doi.org/10.1063/1.1539929
  78. Shengchun, Yang, Fuzhu, Liu, Chao, Wu, Sen and Yang (2016), "Tuning surface properties of low dimensional materials via strain engineering", Small, 12(30), 4028-4047. https://doi.org/10.1002/smll.201601203
  79. Shi, D., Chen, Y., Li, Z., Dong, S., Li, L., Hou, M., Liu, H., Zhao, S., Chen, X. and Wong, C.P. (2022), "Anisotropic charge transport enabling high-throughput and high-aspect-ratio wet etching of silicon carbide", Small Methods, 2200329. https://doi.org/10.1002/smtd.202200329
  80. Shockley, W. and Queisser, H.J. (1961), "Detailed balance limit of efficiency of P-N junction solar cells", J. Appl. Phys., 32(3), 510-519. https://doi.org/10.1063/1.1736034
  81. Tan, C. and Zhang, H. (2015), "Two-dimensional transition metal dichalcogenide nanosheet-based composites", Chem. Soc. Rev., 44(9), 2713-2731. https://doi.org/10.1039/C4CS00182F
  82. Testing, A.S.f., Weathering, M.C.G.o. and Durability (2008), Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surfaces, Springer, England.
  83. Thomas, A., Fischer, A., Goettmann, F., Antonietti, M., Muller, J. O., Schlogl, R. and Carlsson, J.M. (2008), "Graphitic carbon nitride materials: variation of structure and morphology and their use as metal-free catalysts", J. Mater. Chem., 18(41), 4893-4908. https://doi.org/10.1039/B800274F
  84. Tlidji, Y., Benferhat, R., Trinh, L.C., Tahar, H.D. and Abdelouahed, T. (2021), "New state-space approach to dynamic analysis of porous FG beam under different boundary conditions", Adv. Nano Res., 11(4), 347-359. https://doi.org/10.12989/anr.2021.11.4.347
  85. Topsakal, M., Aktuerk, E. and Ciraci, S. (2009), "First-principles study of two- and one-dimensional honeycomb structures of boron nitride", Phys. Rev. B, 79(11), 115442. https://doi.org/10.1103/PhysRevB.79.115442
  86. Tsai, H., Nie, W., Blancon, J.C., Stoumpos, C.C., Asadpour, R., Harutyunyan, B., Neukirch, A.J., Verduzco, R., Crochet, J.J., Tretiak, S., Pedesseau, L., Even, J., Alam, M.A., Gupta, G., Lou, J., Ajayan, P.M., Bedzyk, M.J. and Kanatzidis, M.G. (2016), "High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells", Nature, 536(7616), 312-316. https://doi.org/10.1038/nature18306
  87. Veiros and Luis, F. (2012), "Haptotropic shifts in cyclopentadienyl organometallic complexes: Ring folding vs ring slippage", Organometallics, 19(26), 5549-5558. https://doi.org/10.1021/om000589a
  88. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the self-healing of cementitious materials with a hydrogel system", Gels. 8(5), 278. https://doi.org/10.3390/gels8050278
  89. Wang, L., Sofer, Z. and Pumera, M. (2020a), "Will any crap we put into graphene increase its electrocatalytic effect?", ACS Nano, 14(1). https://doi.org/10.1021/acsnano.9b00184
  90. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022b), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech. A Solids, 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638
  91. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020b), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284
  92. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6
  93. Wu, Y., Zhao, Y., Han, X., Jiang, G., Shi, J., Liu, P., Khan, M.Z., Huhtinen, H., Zhu, J. and Jin, Z. (2021), "Ultra-fast growth of cuprate superconducting films: dual-phase liquid assisted epitaxy and strong flux pinning", Mater. Today Phys., 18, 100400. https://doi.org/10.1016/j.mtphys.2021.100400
  94. Xi, Y., Jiang, W., Wei, K., Hong, T., Cheng, T. and Gong, S. (2021), "Wideband RCS reduction of microstrip antenna array using coding metasurface with low Q resonators and fast optimization method", IEEE Antennas Wireless Propagat. Lett., 21(4), 656-660. https://doi.org/10.1109/LAWP.2021.3138241
  95. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound. Elem., 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003
  96. Xin, C., Li, Z., Zhang, Q., Peng, Y., Guo, H. and Xie, S. (2022), "Investigating the output performance of Triboelectric Nanogenerators with Single/Double-sided interlayer", Nano Energy, 107448. https://doi.org/10.1016/j.nanoen.2022.107448
  97. Xu, K.D., Weng, X., Li, J., Guo, Y.J., Wu, R., Cui, J. and Chen, Q. (2022), "60-GHz third-order on-chip bandpass filter using GaAs pHEMT technology", Semiconduct. Sci. Technol., 37(5), 055004. https://doi.org/10.1088/1361-6641/ac5bf8
  98. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 114395. https://doi.org/10.1016/j.compstruct.2021.114395
  99. Yang, M., Li, C., Said, Z., Zhang, Y., Li, R., Debnath, S., Ali, H.M., Gao, T. and Long, Y. (2021), "Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding", J. Manuf. Proc., 71, 501-514. https://doi.org/10.1016/j.jmapro.2021.09.053
  100. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound. Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013
  101. Ye, X., Zheng, Y. and Wang, X. (2014), "Synthesis of ferrocene-modified carbon nitride photocatalysts by surface amindation reaction for phenol synthesis", Chinese J. Chem., 32(006), 498-506. https://doi.org/10.1002/cjoc.201400229
  102. Yoshikawa, K., Kawasaki, H., Yoshida, W., Irie, T., Konishi, K., Nakano, K., Uto, T., Adachi, D., Kanematsu, M. and Uzu, H. (2017), "Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%", Nature Energy, 2, 17032. https://doi.org/10.1038/nenergy.2017.32
  103. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  104. Zhang, T., Jin, Y., Shi, Y., Li, M., Li, J. and Duan, C. (2019), "Modulating photoelectronic performance of metal-organic frameworks for premium photocatalysis", Coordinat. Chem. Rev., 380, 201-229. https://doi.org/10.1016/j.ccr.2018.10.001
  105. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1
  106. Zheng, H., Liu, G., Zhu, L., Ye, J., Zhang, X., Alsaedi, A., Hayat, T., Pan, X. and Dai, S. (2018), "The effect of hydrophobicity of ammonium salts on stability of quasi-2D perovskite materials in moist condition", Adv. Energy Mater., 8(21), 1800051.1800051-1800051.1800058. https://doi.org/10.1002/aenm.201800051
  107. Zhi, C., Bando, Y., Tang, C., Kuwahara, H. and Golberg, D. (2009), "Large-scale fabrication of boron nitride nanosheets and their utilization in polymeric composites with improved thermal and mechanical properties", Adv. Mater., 21(28), 2889-2893. https://doi.org/10.1002/adma.200900323
  108. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295
  109. Zhou, N., Shen, Y., Li, L., Tan, S., Liu, N., Zheng, G., Chen, Q. and Zhou, H. (2018), "Exploration of crystallization kinetics in quasi two-dimensional perovskite and high performance solar cells", J. Am. Chem. Soc., 140(1), 459. https://doi.org/10.1021/jacs.7b11157
  110. Zhou, Y., Zhang, L., Liu, J., Fan, X., Wang, B., Wang, M., Ren, W., Wang, J., Li, M. and Shi, J. (2015), "Brand new P-doped g-C3N4: Enhanced photocatalytic activity for H2 evolution and Rhodamine B degradation under visible light", J. Mater. Chem. A, 3(7), 3862-3867. https://doi.org/10.1039/C4TA05292G
  111. Zhu, B., Zhang, L., Cheng, B. and Yu, J. (2018), "First-principle calculation study of tri-s-triazine-based g-C3N4: A review", Appl. Catal. B Environ., 224, 983-999. https://doi.org/10.1016/j.apcatb.2017.11.025
  112. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Clean. Prod., 132697. https://doi.org/10.1016/j.jclepro.2022.132697
  113. Zupan, A., Burke, K., Ernzerhof, M. and Perdew, J.P. (1997), "Distributions and averages of electron density parameters: Explaining the effects of gradient corrections", J. Chem. Phys., 106(24), 10184-10193. https://doi.org/10.1063/1.474101