Acknowledgement
이 논문은 2019년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업(Grant No. NRF- 2019R1I1A3A01061508)에 의해 수행하였음.
References
- P. Ghisellini, C. Cialani, and S. Ulgiati, A review on circular economy: The expected transition to a balanced interplay of environmental and economic systems, J. Clean. Prod., 114, 11-32 (2016). https://doi.org/10.1016/j.jclepro.2015.09.007
- S. Wang, Y. Boyjoo, A. Choueib, and Z. H. Zhu, Removal of dyes from aqueous solution using fly ash and red mud, Water Res., 39, 129-138 (2005). https://doi.org/10.1016/j.watres.2004.09.011
- K. Al-Zboon, M. S. Al-Harahsheh, and F. B. Hani, Fly ash-based geopolymer for Pb removal from aqueous solution, J. Hazard. Mater., 188, 414-421 (2011). https://doi.org/10.1016/j.jhazmat.2011.01.133
- L. Li, S. Wang, and Z. Zhu, Geopolymeric adsorbents from fly ash for dye removal from aqueous solution, J. Colloid interface Sci., 300, 52-59 (2006). https://doi.org/10.1016/j.jcis.2006.03.062
- Y. Zhang and L. Liu, Fly ash-based geopolymer as a novel photocatalyst for degradation of dye from wastewater, Particuology, 11, 353-358 (2013). https://doi.org/10.1016/j.partic.2012.10.007
- J. Davidovits, Geopolymers: inorganic polymeric new materials, J. Therm. Anal. Calorim., 37, 1633-1656 (1991). https://doi.org/10.1007/BF01912193
- B. Walkley, G. J. Rees, R. San Nicolas, J. S. van Deventer, J. V. Hanna, and J. L. Provis, New structural model of hydrous sodium aluminosilicate gels and the role of charge-balancing extra-framework Al, J. Phys. Chem. C, 122, 5673-5685 (2018).
- E. Jamieson, B. McLellan, A. Van Riessen, and H. Nikraz, Comparison of embodied energies of Ordinary Portland Cement with Bayer-derived geopolymer products, J. Clean. Prod., 99, 112-118 (2015). https://doi.org/10.1016/j.jclepro.2015.03.008
- J. S. Van Deventer, J. L. Provis, and P. Duxson, Technical and commercial progress in the adoption of geopolymer cement, Miner. Eng., 29, 89-104 (2012). https://doi.org/10.1016/j.mineng.2011.09.009
- R. H. Kupaei, U. J. Alengaram, and M. Z. Jumaat, The effect of different parameters on the development of compressive strength of oil palm shell geopolymer concrete, Sci. World J., 2014 (2014)
- A. M. Al Bakri, O. A., Abdulkareem, A. Rafiza, Y. Zarina, M. Norazian, and H. Kamarudin, Review on Processing of low calcium fly ash geopolymer concrete, Aust. J. Basic Appl. Sci., 7, 342-349 (2013).
- P. C. Duan, C. Yan, and W. Zhou, Influence of partial replacement of fly ash by metakaolin on mechanical properties and microstructure of fly ash geopolymer paste exposed to sulfate attack, Ceram. Int., 42, 3504-3517 (2016). https://doi.org/10.1016/j.ceramint.2015.10.154
- N. Toniolo and A. R. Boccaccini, Fly ash-based geopolymers containing added silicate waste. A review, Ceram. Int., 43, 14545- 14551 (2017). https://doi.org/10.1016/j.ceramint.2017.07.221
- T. Bakharev, Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing, Cem. Concr. Res., 36, 1134-1147 (2006). https://doi.org/10.1016/j.cemconres.2006.03.022
- M. Criado, A. Palomo, and A. Fernandez-Jimenez, Alkali activation of fly ashes. Part 1: Effect of curing conditions on the carbonation of the reaction products, Fuel, 84, 2048-2054 (2005). https://doi.org/10.1016/j.fuel.2005.03.030
- A. Fernandez-Jimenez and Palomo, Composition and microstructure of alkali activated fly ash binder: Effect of the activator, Cem. Concr. Res., 35, 1984-1992 (2005). https://doi.org/10.1016/j.cemconres.2005.03.003
- I. M. Nikbin, M. Aliaghazadeh, S. H. Charkhtab, and A. Fathollahpour Environmental impacts and mechanical properties of lightweight concrete containing bauxite residue (red mud), J. Clean. Prod., 172, 2683-2694 (2018). https://doi.org/10.1016/j.jclepro.2017.11.143
- G. Power, M. Grafe, and C. Klauber, Bauxite residue issues: I. Current management, disposal and storage practices, Hydrometallurgy, 108, 33-45 (2011). https://doi.org/10.1016/j.hydromet.2011.02.006
- K. Kaya and S. Soyer-Uzun, Evolution of structural characteristics and compressive strength in red mud-metakaolin based geopolymer systems, Ceram. Int., 42, 7406-7413 (2016). https://doi.org/10.1016/j.ceramint.2016.01.144
- T. Hertel and Y. Pontikes, Geopolymers, inorganic polymers, alkali-activated materials and hybrid binders from bauxite residue (red mud)-Putting things in perspective, J. Clean. Prod., 258, 120610 (2020).
- M. Dai, P. Wang, W. Q. Chen, and G. Liu, Scenario analysis of China's aluminum cycle reveals the coming scrap age and the end of primary aluminum boom, J. Clean. Prod., 226, 793-804 (2019). https://doi.org/10.1016/j.jclepro.2019.04.029
- S. G. Singaraj, B. Mahanty, D. Balachandran, and A. Padmaprabha, Adsorption and desorption of chromium with humic acid coated iron oxide nanoparticles, Environ. Sci. Pollut. Res., 26, 30044- 30054 (2019). https://doi.org/10.1007/s11356-019-06164-0
- R. Sips, The structure of a catalyst surface, J. Chem. Phys., 16, 490-495 (1949). https://doi.org/10.1063/1.1746922
- J. C. Lagarias, J. A. Reeds, M. H. Wright, and P. E. Wright, Convergence properties of the Nelder-Mead simplex method in low dimensions, SIAM J. Optim., 9, 112-147 (1998). https://doi.org/10.1137/S1052623496303470
- E. Sanwani, E. Jeremy, S. K. Chaerun, F. R. Mufakhir, and W. Astuti, Use of mixotrophic bacteria as flocculating agents to separate iron from red mud (alumina refinery residue), J. Sust. Metall., 8, 443-457 (2022). https://doi.org/10.1007/s40831-021-00479-4
- P. Cong and Y. Cheng, Advances in geopolymer materials: A comprehensive review, J. Traffic Transp. Eng.-Engl. Ed., 8, 283- 314 (2021).
- A. Wang, C. Zhang, and W. Sun, Fly ash effects: I. The morphological effect of fly ash, Cem. Concr. Res., 33, 2023-2029 (2003). https://doi.org/10.1016/S0008-8846(03)00217-5
- A. Gok, M. Omastova, and J. Prokes, Synthesis and characterization of red mud/polyaniline composites: electrical properties and thermal stability, Eur. Polym. J., 43, 2471-2480 (2007). https://doi.org/10.1016/j.eurpolymj.2007.03.005
- E. Alvarez-Ayuso, X. Querol, F. Plana, A. Alastuey, N. Moreno, M. Izquierdo, O. Font, T, Moreno, S. Diez, E. Vazquez, and M. Barra, Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-) combustion fly ashes, J. Hazard. Mater., 154, 175-183 (2008). https://doi.org/10.1016/j.jhazmat.2007.10.008
- S. K. Nath, S. Maitra, S. Mukherjee, and S. Kumar, Microstructural and morphological evolution of fly ash based geopolymers, Constr. Build. Mater., 111, 758-765 (2016). https://doi.org/10.1016/j.conbuildmat.2016.02.106
- C. Pelekani and V. L. Snoeyink, Competitive adsorption between atrazine and methylene blue on activated carbon: the importance of pore size distribution, Carbon, 38, 1423-1436 (2000). https://doi.org/10.1016/S0008-6223(99)00261-4
- H. Saufi, M. El Alouani, S. Alehyen, M. El Achouri, J. Aride, and N. H. Taibi, Photocatalytic degradation of methylene blue from aqueous medium onto perlite-based geopolymer, Int. J. Chem. Eng., 2020, 1-7 (2020).