DOI QR코드

DOI QR Code

Virtual Reality Software for Review and Use of Structural Analysis Model of Hanok

한옥의 구조해석 모델 검토 및 활용을 위한 가상현실 소프트웨어

  • Received : 2023.09.04
  • Accepted : 2023.09.22
  • Published : 2023.10.31

Abstract

In this study, virtual reality software was developed to support the generation of an analysis model of a Hanok and to increase the use of the completed analysis model. The structural analysis model of the Hanok was generated using midas Gen, a general-purpose structural analysis software. After converting it into a text-based input file, the developed software stores the data necessary for the examination of the analysis model. Then, in the developed virtual reality software, the three-dimensional analysis model of the Hanok can be visualized in various ways and the related data can be shown by selecting a specific member. Through this process, errors in the analysis model can be identified and corrected to build a complete analysis model. The developed software was applied to three Hanok cases to verify its applicability and effectiveness. The software is expected to be used in other fields besides the structural field.

본 연구에서는 한옥의 해석모델 구축을 지원하고, 구축된 해석모델의 활용도를 높이고자 이를 활용한 가상현실 소프트웨어를 개발하였다. 한옥의 구조해석 모델은 범용 구조해석 소프트웨어인 midas Gen으로 생성하고, 이를 문자기반 입력파일로 변환한 후 본 연구에서 개발된 소프트웨어에서 한옥 해석모델의 검토에 필요한 자료들을 저장한다. 개발된 가상현실 소프트웨어 내에서 3차원으로 표현된 한옥의 해석모델은 시점을 변경하며 살펴볼 수 있고 특정 부재를 선택하여 관련된 자료를 확인할 수 있다. 이러한 과정을 통해 해석모델의 오류를 확인 및 수정하여 완결된 해석모델을 구축할 수 있다. 개발된 소프트웨어는 3개의 한옥 사례에 적용하여 그 적용성과 효용성을 검증하였으며, 구조분야 이외의 타 분야에서도 활용될 수 있다.

Keywords

References

  1. Cho, Y.J., Jo, G.R. (2008) A Study on the Development of an Intelligent Modeler for Modernized Korean Traditional Buildings using BIM Systems, J. Korean Hous. Assoc., 19(6), pp.55~62.
  2. Jung, S.J., Hong, S.G., Kim, N.H., Lee, Y.W., Hwang, J.K., Bae, B.S. (2005) A Study on the Modeling Method for the Analysis of the Korean Traditional Wooden Frame, J. Archit. Inst. Korea : Struct. & Constr. Sect., 21(12), pp.77~84.
  3. Kim, S.R., Jung, Y.S. (2016) Improvement of Workability and Schedule Management using Augmented Reality in Modernized Hanok Construction, Proceedings of COSEIK Annual Conference, Computational Structural Engineering Institute of Korea.
  4. Kim, Y.M. (2013) What is the Characteristics of Structural Analysis of Hanok?, Rev. Archit. & Build. Sci., Archi. Inst. Korea, 57(4), pp.17~20.
  5. Kim, Y.M. (2015) Evaluation of Structural Performance and Dynamic Characteristics of Korean Traditional Timber Structure Sungnyemun, J. Comput. Struct. Eng. Inst. Korea, 28(6), pp.607~614. https://doi.org/10.7734/COSEIK.2015.28.6.607
  6. Kim, Y.M. (2017) Development of Automated Structural Design Tool for Horizontal Members of Hanok. J. Archit. Ins. Korea, Struct. & Constr. Sect., 33(4), pp.21-28.
  7. Kim, Y.M. (2019) An Evaluation Scheme of Torsional Irregularity for Seismic Design of Hanok, J. Archit. Inst. Korea : Struct. & Constr. Sect., 35(10), pp.191~198.
  8. Kim, Y.M., Kim, J.H., Lee, S.G. (2012) Review Structural Safety and Propose Appropriate Sectional Size for New Traditional Korean-Style House, J. Archit. Inst. Korea, Struct. & Constr. Sect., 28(5), pp.37~44.
  9. Kim, Y.M., Kim, Y.M., Kim. H.J., Ha, T.U., Shin, E.M., Kim, W.J. (2021) Analysis of Roof Load and Dynamic Characteristics of Traditional Timber Building Considering Column Axial Force and Ambient Vibration Measurement, J. Archit. Inst. Korea, 37(11), pp.271~280.
  10. Kim, Y.M., Lee, S.G. (2013) Evaluation of Connection Stiffness of Test-Bed Hanok using a 1/4 Scale Two-Storied Model, J. Archit. Inst. Korea, Struct. & Constr. Sect., 29(12), pp.73~80.
  11. Kim, Y.M., Lee, S.G., Lee, S.H. (2015) Evaluation of Effective Lateral Stiffness of a Korean-Traditional Wooden House with New Joint Types, Eng. Struct., 94, pp.113~121. https://doi.org/10.1016/j.engstruct.2015.03.008
  12. Kim, Y.M., Lee, S.H., Mun, D.H. (2022) Dynamic Characteristics Evaluation of Long-Span Full-Scale Modernized Hanok through Field Vibration Test, J. Archit. Inst. Korea, 38(12), pp.345~354.
  13. Lee, J.H. (2016) Development of Authoring and Interactive Restoration Simulation Technology for Experiential Learning on Korean Traditional Digital Heritage, Final Report R2013040060, Electronics and Telecommunications Research Institute, Korea, p.194.
  14. Lee, K.H., Cho, S.H. (2009) 3D Digital Restoration of Traditional Wooden Building using Parametric Modeling, J. Korean Multimed. Soc., 12(8), pp.1164~1171.
  15. Lee, K.H., Cho, S.H. (2010) 3D Implementation of Wooden Structure System in Korea Traditional Wooden Building, J. Korean Multimed. Soc., 13(2), pp.332~340.
  16. Lee, K.H., Cho, S.H. (2013) Digital Restoration of Traditional Architectural Buildings using Multimedia and Augmented Reality Technologies, J. Korean Multimed. Soc., 16(2), pp. 206~212. https://doi.org/10.9717/kmms.2013.16.2.206
  17. Lee, M.W., Kim, Y.M. (2020) Development of Automated Evaluation System for Torsional Irregularity of Hanok, J. Archit. Inst. Korea, 36(8), pp.173~180.
  18. Lim, N.K., Kim, H.S. (1987) A Study on the Flow of Stress in the Traditional Korean Wooden Building, Proc. Archit. Inst. Korea, 7(2), pp.447~450.
  19. Midas Gen Ver.890 (2020) MIDAS IT Co., Ltd.
  20. Min, K.W., Park, S.A. (2011) Simple Structural Model and Seismic Analysis of Heunginjimum, J. Archit. Inst. Korea, Struct. & Constr. Sect., 27(4), pp.23~30.
  21. Park, K.H., Choi, H.H., Kim, J.K., Yoon, C.S. (2010) Structural Analysis of the Gukrak-Pavilion of Bulkuk-temple using an Equivalent Model, J. Archit. Inst. Korea, Struct. & Constr. Sect., 26(1), pp.63~70.
  22. Woo, S.H. (2019) A Development of Reverse Engineering for Mobile-AR based Architectural Heritage Maintenance, Final Report 1345302133, Kyungil University, Korea, p.13.
  23. Yoon, C.S., Yun, Y.G., Kang, S.H. (2004) A Study on the Structural Modeling and Analysis for Gukrak-Pavilion of Bongjung-Temple, J. Archit. Inst. Korea : Plan. & Des. Sect., 20(9), pp.13~20.