Acknowledgement
본 연구는 충남대학교의 연구비 지원으로 수행되었습니다.
References
- Liang, G. and I. Mudawar, 2017, "Review of spray cooling-Part 1: Single-phase and nucleate boiling regimes, and critical heat flux," International Journal of Heat and Mass Transfer, Vol. 115, pp. 1174-1205. https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.029
- Yi, S.-J., Yang, J.-H., Jeon, B. G., Bae, Hwang, and Park, S.-K., 2023, "Concept of the asymmetric two-step thermosiphon for the containment cooling of small modular reactor," Submitted.
- Liang, G. and I. Mudawar, 2017, "Review of spray cooling-Part 2: High temperature boiling regimes and quenching applications," International Journal of Heat and Mass Transfer, Vol. 1155, pp. 1206-1222. https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.022
- Chen, Z., Xie, Q., Chen, G., Yu, Y., and Zhao, Z., 2018, "Numerical simulation of single-nozzle large scale spray cooling on drum wall," Thermal Science, Vol. 22, pp. 359-370. https://doi.org/10.2298/TSCI170920243C
- Liu, H., Cai, C., Yan, Y.a., Jia, M., and B. Yin, 2018, "Numerical simulation and experimental investigation on spray cooling in the non-boiling region," Heat and Mass Transfer, Vol. 54, pp. 3747-3760. https://doi.org/10.1007/s00231-018-2402-7
- Liu, H., Chen, H., Cai, C., Jia, M., and Yin, H., 2019, "Numerical investigation on the unsteady spray cooling of high temperature steel plate," International Journal of Heat and Mass Transfer, Vol. 143, 118342.
- Lee, S.H., Hur, N., and Kang, S., 2011, "A numerical analysis of drop impact on liquid film by using a level set method," Journal of Mechanical Science and Technology, Vol. 25, pp. 2567-2572. https://doi.org/10.1007/s12206-011-0613-7
- Peng, C., Xu, X., and Liang, X., 2020, "Numerical investigation on crown behavior and energy evolution of droplet impinging onto thin film," International Communications in Heat and Mass Transfer, Vol. 114, 104532.
- Chen, G., Fu, C., Xu, B., Wu, Y., Lien, F.-S., and Yee, E., 2022, "Internal mixing air-assisted spray nozzle for large droplets: Experimental measurements and numerical simulations," Journal of Aerosol Science, Vol. 165, 106035.
- Jie, L. and Peng, K., 2022, "Modelling and analysis of initial icing roughness with fixed-grid enthalpy method based on DPM-VOF algorithm," Chinese Journal of Aeronautics, Vol. 35(7), pp. 168-178. https://doi.org/10.1016/j.cja.2021.07.028
- Damsohn, M. and Prasser, H.-M. 2009, "High-speed liquid film sensor for two-phase flows with high spatial resolution based on electrical conductance," Flow Measurement and Instrumentation, Vol. 20(1), pp. 1~14. https://doi.org/10.1016/j.flowmeasinst.2008.06.006
- Lee, K. B., Kim, J. R., Park, G. C., and Cho, H. K., 2017, "Feasibility test of a liquid film thickness sensor on a flexible printed circuit board using a three-electrode conductance method," Sensors, Vol. 17(1), 42.
- Choi, C.-J. and Cho, H. K. 2020, "Effect of asymmetric airflow on liquid film behavior and emergency core coolant bypass in the downcomer geometry of a nuclear reactor pressure vessel," International Communications in Heat and Mass Transfer, Vol. 117, 104765.