Advances in concrete construction

  • 제19권6호
  • /
  • Pages.363-380
  • /
  • 2025
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimal surface for corner combined footings assuming that the ground contact area works partially in compression considering that the maximum pressure is located at one end and on the outer and inner side of the footing: Part 2

  • 투고 : 2023.10.09
  • 심사 : 2025.01.03
  • 발행 : 2025.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

This work presents the optimal surface for corner combined footings considering that the contact area with the soil works partially in compression (a part of the contact surface of the footing is subject to compression and the other there is no pressure and neither tensile). The methodology is developed by integration to obtain the resultant force and resultant moments in the X and Y axes that act on the footing due to the soil pressure. The three types that can occur depending on the location of the maximum pressure are: 1) Corner of the footing; 2) At one end and on the outer side of the footing; 3) At one end and on the inner side of the footing. In this work, the simplified equations are shown when the maximum pressure is located at one end and on the outer and inner side of the footing. Some engineers obtain the contact area of the footing by the trial and error method. Other authors present the minimum area for a corner combined footing taking into account that the contact area with the soil works completely in compression. Numerical examples are shown to obtain the minimum area of the footings and the results are compared with the current model. The new model shows a smaller soil contact area in some cases than the current model.

키워드

참고문헌

  1. Aguilera-Mancilla, G., Luévanos-Rojas, A., López-Chavarría, S. and Medina-Elizondo, M. (2019), "Modeling for the strap combined footings Part I: Optimal dimensioning", Steel Compos. Struct., Int. J., 30(2), 97-108. https://doi.org/10.12989/scs.2019.30.2.097
  2. Al-Gahtani, H.J. and Adekunle, S.K. (2019), "A boundary-type approach for the computation of vertical stresses in soil due to arbitrarily shaped foundations", World J. Eng., 16(3), 419-426. https://doi.org/10.1108/WJE-02-2018-0051
  3. Aydogdu, I. (2016), "New Iterative method to Calculate Base Stress of Footings under Biaxial Bending", Int. J. Eng. Appl. Sci. (IJEAS), 8(4), 40-48. https://doi.org/10.24107/ijeas.281460
  4. Bashir, M.A., Furuuchi, H., Ueda, T. and Bashir, N. (2013), "Prediction of ultimate moment anchorage capacity of concrete filled steel box footing", Steel Compos. Struct., Int. J., 15(6), 645-658. https://doi.org/10.12989/scs.2013.15.6.645
  5. Belabed, Z., Tounsi, A., Bousahla, A.A., Tounsi, A., Khedher, K.M. and Salem, M.A. (2024), "Mechanical behavior analysis of FG-CNTRC porous beams resting on Winkler and Pasternak elastic foundations: A finite element approach", Comput. Concrete, Int. J., 26(3), 285-292. https://doi.org/10.12989/cac.2024.34.4.447
  6. Bezmalinovic Colleoni, A.S. (2016), "Fórmulas Analíticas para la Presión de Contacto Lineal en Fundaciones Rectangulares Altamente Excéntricas", In: IX Chilean Congress on Geotechnical Engineering, Chilean Geotechnical Society, Universidad Austral de Chile, Chile.
  7. Dai, W., Fatahizadeh, M., Touchaei, H.G., Moayedi, H. and Foong, L.K. (2023), "Application of six neural network-based solutions on bearing capacity of shallow footing on double-layer soils", Steel Compos. Struct., Int. J., 49(2), 231-244. https://doi.org/10.12989/scs.2023.49.2.231
  8. Galvis, F.A. and Smith-Pardo, P.J. (2020), "Axial load biaxial moment interaction (PMM) diagrams for shallow foundations: Design aids, experimental verification, and examples", Eng. Struct., 213, p. 110582. https://doi.org/10.1016/j.engstruct.2020.110582
  9. Girgin, K. (2017), "Simplified formulations for the determination of rotational spring constants in rigid spread footings resting on tensionless soil", J. Civil Eng. Manag., 23(4), 464-474. https://doi.org/10.3846/13923730.2016.1210218
  10. Gör, M. (2022), "Analyzing the bearing capacity of shallow foundations on two-layered soil using two novel cosmologybased optimization techniques", Smart Struct. Syst., Int. J., 29(3), 513-522. https://doi.org/10.12989/sss.2022.29.3.513
  11. Highter, W.H. and Anders, J.C. (1985), "Dimensioning footings subjected to eccentric loads", J. Geotech. Eng., 111(5), 659-665. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:5(659)
  12. Himeur, N., Mamen, B., Benguediab, S., Bouhadra, A., Menasria, A., Bouchouicha, B., Bourada, F., Benguediab, M. and Tounsi, A. (2022), "Coupled effect of variable Winkler–Pasternak foundations on bending behavior of FG plates exposed to several types of loading", Steel Compos. Struct., Int. J., 44(3), 353-369. https://doi.org/10.12989/scs.2022.44.3.353
  13. Irles-Más, R. and Irles-Más, F. (1992), "Alternativa analítica a la determinación de tensiones bajo zapatas rectangulares con flexión biaxial y despegue parcial", Informes de la Construcción, 44(419), 77-89. https://dialnet.unirioja.es/servlet/articulo?codigo=2768804 https://doi.org/10.3989/ic.1992.v44.i419.1338
  14. Kaur, A. and Kumar, A. (2016), "Behavior of eccentrically inclined loaded footing resting on fiber reinforced soil", Geomech. Eng., Int. J., 10(2), 155-174. https://doi.org/10.12989/gae.2016.10.2.155
  15. Khajehzadeh, M., Taha, M.R. and Eslami, M. (2014), "Multiobjective optimization of foundation using global-local gravitational search algorithm", Struct. Eng. Mech., Int. J., 50(3), 257-273. https://doi.org/10.12989/sem.2014.50.3.257
  16. Lee, J., Jeong, S. and Lee, J.K. (2015), "3D analytical method for mat foundations considering coupled soil springs", Geomech. Eng., Int. J., 8(6), 845-850. https://doi.org/10.12989/gae.2015.8.6.845
  17. Lezgy-Nazargah, M., Mamazizi, A. and Khosravi, H. (2022), "Analysis of shallow footings rested on tensionless foundations using a mixed finite element model", Struct. Eng. Mech., Int. J., 81(3), 379-394. https://doi.org/10.12989/sem.2022.81.3.379
  18. López-Chavarría, S., Luévanos-Rojas, A. and Medina-Elizondo, M. (2017), "Optimal dimensioning for the corner combined footings", Adv. Comput. Des., Int. J., 2(2), 107-121. https://doi.org/10.12989/acd.2017.2.2.169
  19. López-Chavarría, S., Luévanos-Rojas, A., Medina-Elizondo, M., Sandoval-Rivas, R. and Velázquez-Santillán, F. (2019), "Optimal design for the reinforced concrete circular isolated footings", Adv. Comput. Des., Int. J., 4(3), 273-294. https://doi.org/10.12989/acd.2019.4.3.273
  20. Lu, X. and Aboutaha, R.S. (2021), "Strengthening of isolated square footings using passive wrapping systems", Comput. Concrete, Int. J., 27(1), 41-54. https://doi.org/10.12989/cac.2021.27.1.041
  21. Luévanos-Rojas, A. (2012a), "A mathematical model for dimensioning of footings square", Int. Rev. Civil Eng., 52(4), 346-350.
  22. Luévanos-Rojas, A. (2012b), "A mathematical model for the dimensioning of circular footings", Far East J. Math. Sci., 71(2), 357-367.
  23. Luévanos-Rojas, A. (2013), "A mathematical model for dimensioning of footings rectangular", ICIC Express Letters. Part B, Applications: an International Journal of Research and Surveys, 4(2), 269-274.
  24. Luévanos-Rojas, A. (2014), "Design of isolated footings of circular form using a new model", Struct. Eng. Mech., Int. J., 52(4), 379-394. https://doi.org/10.12989/sem.2014.52.4.767
  25. Luévanos-Rojas, A. (2015a), "A new mathematical model for dimensioning of the boundary trapezoidal combined footings", Int. J. Innov. Comput. I., 11(4), 1269-1279. http://www.ijicic.org/ijicic-110411.pdf 10411.pdf
  26. Luévanos-Rojas, A. (2015b), "Design of boundary combined footings of trapezoidal form using a new model", Struct. Eng. Mech., Int. J., 56(5), 745-765. https://doi.org/10.12989/sem.2015.56.5.745
  27. Luévanos-Rojas, A. (2016), "A mathematical model for the dimensioning of combined footings of rectangular shape", Rev. Tec. Fac. Ing. Univ., 39(1), 3-9. https://produccioncientificaluz.org/index.php/tecnica/article/view/21090/20946 1090/20946
  28. Luévanos-Rojas, A. (2023a), "Optimization for trapezoidal combined footings: Optimal design", Adv. Concrete Constr., Int. J., 16(1), 21-34. https://doi.org/10.12989/acc.2023.16.1.021
  29. Luévanos-Rojas, A. (2023b), "New model for complete design of rectangular isolated footings taking into account that the contact surface works partially in compression", Revista ALCONPAT, 10(3), 192-219. https://doi.org/10.21041/ra.v13i2.671
  30. Luévanos-Rojas, A., López-Chavarría, S. and Medina-Elizondo, M. (2017). "Optimal design for rectangular isolated footings using the real soil pressure", Ing. Invest., 37(2), 25-33. http://dx.doi.org/10.15446/ing.investig.v37n2.61447
  31. Luévanos-Rojas, A., López-Chavarría, S. and Medina-Elizondo, M. (2018a), "A new model for T-shaped combined footings Part I: Optimal dimensioning", Geomech. Eng., Int. J., 14(1), 51-60. https://doi.org/10.12989/gae.2018.14.1.051
  32. Luévanos-Rojas, A., López-Chavarría, S. and Medina-Elizondo, M. (2018b), "A new model for T-shaped combined footings Part II: Mathematical model for design", Geomech. Eng., Int. J., 14(1), 61-69. https://doi.org/10.12989/gae.2018.14.1.061
  33. Luévanos-Rojas, A., Santiago-Hurtado, G., Moreno-Landeros, V.M., Olguin-Coca, F.J., López-León, L.D. and Diaz-Gurrola, E.R. (2024a), "Mathematical Modeling of the Optimal Cost for the Design of Strap Combined Footings", Math., 12(2), 1-20. https://doi.org/10.3390/math12020294
  34. Luévanos-Rojas, A., Moreno-Landeros, V.M., Santiago-Hurtado, G., Olguin-Coca, F.J., López-León, L.D., Baltazar-Zamora, M.A. and Diaz-Gurrola, E.R. (2024b), "Mathematical Modeling for the Optimal Cost Design of Circular Isolated Footings with Eccentric Column", Math., 12(5), 1-19. https://doi.org/10.3390/math12050733
  35. Luévanos-Soto, I., Luévanos-Rojas, A., Moreno-Landeros, V.M., Santiago-Hurtado, G. (2024a), "Minimum area for circular isolated footings with eccentric column taking into account that the surface in contact with the ground works partially in compression", Couple. Syst. Mech., Int. J., 13(3), 201-217. https://doi.org/10.12989/csm.2024.13.3.201
  36. Luévanos-Soto, I., Luévanos-Rojas, A., Moreno-Landeros, V.M., Santiago-Hurtado, G. (2024b), "Minimum cost design for circular isolated footings with eccentric column taking into account that the surface in contact with the ground works partially in compression", Couple. Syst. Mech., Int. J., 13(4), 311-335. https://doi.org/10.12989/csm.2024.13.4.311
  37. Mansour, W., Fayed, S. and Basha, A. (2022), "Experimental and numerical analysis of the punching behavior of RC isolated footings", Steel Compos. Struct., Int. J., 45(5), 665-682. https://doi.org/10.12989/scs.2022.45.5.665
  38. Montes-Paramo, P., Luevanos-Rojas, A., López-Chavarría, S., Medina-Elizondo, M. and Sandoval-Rivas, R. (2023), "Optimal area for rectangular combined footings assuming that the contact surface with the soil works partially to compression", Ingeniería Investigación y Tecnología, 24(2), 1-15. https://doi.org/10.22201/fi.25940732e.2023.24.2.012
  39. Özmen, G. (2011), "Determination of Base Stresses in Rectangular Footings under Biaxial Bending", Teknik Dergi Digest., 22(4), 1519-1535. http://www.imo.org.tr/resimler/dosya_ekler/7b559795bd3f63b_ek.pdf?dergi=472
  40. Peck, R.B., Hanson, W.E. and Thornburn, T.H. (1974), Foundation Engineering, (2nd Edition), John Willy & Sons, New York, NY, USA.
  41. Rawat, S., Mittal, R.K. and Muthukumar, G. (2020), "Isolated rectangular footings under biaxial bending: a critical appraisal and simplified analysis methodology", Pract. Period. Struct. Des. Constr., 25(3), p. 04020011. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000471
  42. Rodriguez-Gutierrez, J.A. and Aristizabal-Ochoa, J.D. (2013a), "Rigid spread footings resting on soil subjected to axial load and biaxial bending. I: Simplified analytical method", Int. J. Geomech., 13(2), 109-119. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000218
  43. Rodriguez-Gutierrez, J.A. and Aristizabal-Ochoa, J.D. (2013b), "Rigid Spread Footings Resting on Soil Subjected to Axial Load and Biaxial Bending. II: Design Aids", Int. J. Geomech., 13(2), 120-131. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000210
  44. Soto-García, S., Luévanos-Rojas, A., Barquero-Cabrero, J.D., López-Chavarría, S., Medina-Elizondo, M., FariasMontemayor, O.M. and Martínez-Aguilar, C. (2022), "A New Model for the contact surface with soil of circular isolated footings considering that the contact surface works partially under compression", Int. J. Innov. Comput. Inform. Control, 18(4), 1103-1116. http://www.ijicic.org/ijicic-180406.pdf
  45. Teng, W.C. (1979), Foundation Design, Prentice-Hall Inc., New Delhi, India.
  46. Turedi, Y., Emirler, B., Ornek, M. and Yildiz, A. (2019), "Determination of the bearing capacity of model ring footings: Experimental and numerical investigations", Geomech. Eng., Int. J., 18(1), 29-39. https://doi.org/10.12989/gae.2019.18.1.029
  47. Vela-Moreno, V.B., Luévanos-Rojas, A., López-Chavarría, S., Medina-Elizondo, M., Sandoval-Rivas, R. and MartinezAguilar, C. (2022), "Optimal area for rectangular isolated footings considering that contact surface works partially to compression", Struct. Eng. Mech., Int. J., 84(4), 561-573. https://doi.org/10.12989/sem.2022.84.4.561
  48. Velázquez-Santillán, F., Luévanos-Rojas, A., López-Chavarría, S., Medina-Elizondo, M. and Sandoval-Rivas, R. (2018), "Numerical experimentation for the optimal design for reinforced concrete rectangular combined footings", Adv. Comput. Des., Int. J., 3(1), 49-69. https://doi.org/10.12989/acd.2018.3.1.049
  49. Yáñez-Palafox, J.A., Luévanos-Rojas, A., López-Chavarría, S. and Medina-Elizondo, M. (2019), "Modeling for the strap combined footings Part II: Mathematical model for design", Steel Compos. Struct., Int. J., 30(2), 109-121. https://doi.org/10.12989/scs.2019.30.2.109
  50. Young, W.C. and Budynas, R.G. (2002), Roark's Formulas for Stress and Strain, (7th Edition), McGraw-Hill, NJ, USA.