Advances in concrete construction

  • 제20권1호
  • /
  • Pages.51-57
  • /
  • 2025
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evolution of thickness variation of chiral nanotubes via wide-ranging computational approach

  • Mohamed Amine Khadimallah (Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University) ;
  • Muzamal Hussain (Department of Mathematics, University of Sahiwal) ;
  • Abdullah Alnutayfat (Department of Civil Engineering, College of Engineering in Al-Kharj, Prince Sattam Bin Abdulaziz University) ;
  • Sofiene Helaili (LASMAP (LR03ES06), Polytechnic School, Carthage University)
  • 투고 : 2024.08.04
  • 심사 : 2025.06.02
  • 발행 : 2025.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the vibrational frequencies with different values of height-to-diameter ratios are investigated using modified orthotropic shell model to note the small scale effects. The generality of orthotropic shell model has proven to give better results of single walled carbon nanotubes. The closed form solution gives better accuracy, even for higher frequencies but arriving at the closed form solution might prove to be a challenge. For higher frequencies, the analysis of structure is implemented with well-known approach. The chiral structure is complex structure and frequencies are extracted with to clamped-clamped (C-C) and clamped-free (C-F) boundary conditions. The frequencies (THz) are investigated against the height-to-diameter ratios. The frequencies increase on increasing the height-to-diameter ratios. The behavior of the frequencies is occurring as sag in its nature. The results are validated and excellent similarity is observed.

키워드

과제정보

This study is supported via funding from Prince Satam bin Abdulaziz University project number (PSAU/2025/R/1446).

참고문헌

  1. Alghaffari, S., Hussain, M., Khadimallah, M.A., Al Thobiani, F. and Sulaimani, H.T. (2023), "Simply supported boundary condition for bifurcation analysis of functionally graded material: Thickness control by exponential fraction law", Adv. Nano Res., Int. J., 14(4), 303-312. https://doi.org/10.12989/anr.2023.14.4.303
  2. Alijani, M. and Bidgoli, M.R. (2018), "Agglomerated SiO2 nanoparticles reinforced-concrete foundations based on higher order shear deformation theory: Vibration analysis", Adv. Concrete Constr., Int. J., 6(6), 585-610. https://doi.org/10.12989/acc.2018.6.6.585
  3. Ansari, R. and Arash, B. (2013), "Nonlocal Flügge shell model for vibrations of double-walled carbon nanotubes with different boundary conditions", J. Appl. Mech, 80(2), p. 021006. https://doi.org/10.1115/1.4007432
  4. Asghar, S., Naeem, M.N. and Hussain, M. (2020), "Non-local effect on the vibration analysis of double walled carbon nanotubes based on Donnell shell theory", Physica E: Lowdimens. Syst. Nanostr., 116, p. 113726. https://doi.org/10.1016/j.physe.2019.113726
  5. Benguediab, S., Tounsi, A., Zidour, M. and Semmah, A. (2014), "Chirality and scale effects on mechanical buckling properties of zigzag double-walled carbon nanotubes", Compos. Part B: Eng., 57, 21-24. https://doi.org/10.1016/j.compositesb.2013.08.020
  6. Christopher, C.G., Pachaivannan, P. and Elamparithi, P.N. (2023), "Study on self-compacting polyester fiber reinforced concrete and strength prediction using ANN", Adv. Concrete Constr., Int. J., 15(2), 85-96. https://doi.org/10.12989/acc.2023.15.2.085 
  7. Demir, A.D. and Livaoglu, R. (2019), "The role of slenderness on the seismic behavior of ground-supported cylindrical silos", Adv. Concrete Constr., Int. J., 7(2), 65-74. https://doi.org/10.12989/acc.2019.7.2.065
  8. Deng, S., Wu, L., Shi, G., Xing, L., Jian, M., Xiang, Y. and Dong, R. (2024), "Learning to compose diversified prompts for image emotion classification", Computat. Visual Media, 10(6), 1169-1183. https://doi.org/10.1007/s41095-023-0389-6
  9. Dresselhaus, M.S., Dresselhaus, G. and Saito, R. (1995), "Physics of carbon nanotubes", Carbon, 33(7), 883-891. http://doi.org/10.1016/0008-6223(95)00017-8
  10. Elsamak, G. and Fayed, S. (2021), "Flexural strengthening of RC beams using externally bonded aluminum plates: An experimental and numerical study", Adv. Concrete Constr., Int. J., 11(6), 481-492. https://doi.org/10.12989/acc.2021.11.6.481
  11. Fatahi‐Vajari, A., Azimzadeh, Z. and Hussain, M. (2019), "Nonlinear coupled axial–torsional vibration of single‐walled carbon nanotubes using homotopy perturbation method", Micro Nano Lett., 14(14), 1366-1371. https://doi.org/10.1049/mnl.2019.0203
  12. Flügge, W. (1962), Statik und Dynamik der Scahlen, Springer, Berlin, Germany. ISBN: 978-3-642-49579-3 
  13. Fu, Y.M., Hong, J.W. and Wang, X.Q. (2006), "Analysis of nonlinear vibration for embedded carbon nanotubes", J. Sound Vib., 296(4-5), 746-756. https://doi.org/10.1016/j.jsv.2006.02.024
  14. Gao, D., Li, Z., Ding, C. and Yu, Z. (2025), "Uniaxial tensile stress-strain constitutive relationship of 3D/4D/5D steel fiberreinforced concrete", Constr. Build. Mater., 470, p. 140539. https://doi.org/10.1016/j.conbuildmat.2025.140539
  15. Geng, X., He, Y., Tang, L., Chang, S., Zhang, J., Yang, W., Yuan, M., Wang, G., Li, Q., Ping, Y. and Huang, S. (2025), "Investigation of the Effect of Bonding Wires Degradation on Switching Stress Waves Released During Power Cycling in Discrete IGBT", IEEE J. Emerg. Select. Topics Power Electron., 13(2), 2057-2069. https://doi.org/10.1109/JESTPE.2025.3532692
  16. Ghandourah, E., Hussain, M., Khadimallah, A., Alhawsawi, A., Banoqitah, E.M. and Ali, M.R. (2023), "Vibration analysis of double-walled carbon nanotubes based on Timoshenko beam theory and wave propagation approach", Adv. Nano Res., Int. J., 14(6), 521-525. https://doi.org/10.12989/anr.2023.14.6.521
  17. Hu, Y.G., Liew, K.M., Wang, Q., He, X.Q. and Yakobson, B.I. (2008), "Nonlocal shell model for elastic wave propagation in single- and double-walled carbon nanotubes", J. Mech. Phys. Solids, 56(12), 3475-3485. https://doi.org/10.1016/j.jmps.2008.08.010
  18. Huang, G., Zhang, L., Chu, S., Xie, Y. and Chen, Y. (2024a), "A highly ductile carbon material made of triangle rings: A study of machine learning", Appl. Phys. Lett., 124(4), p. 043103. https://doi.org/10.1063/5.0189906
  19. Huang, Y., Yuan, H., Nie, B., Gong, T., Wang, Y., Lv, S., Jiang, P., Wei, W., Yang, Y., Chai, J. and Wu, Z. (2024b), "Deep insights into the mechanism of nitrogen on the endurance enhancement in ferroelectric field effect transistors: Trap behavior during memory window degradation", Appl. Phys. Lett., 124(13), p. 133504. https://doi.org/10.1063/5.0196442
  20. Huang, Z., Zhang, C., Ge, L., Chen, Z., Lu, K. and Wu, C. (2024c), "Joining spatial deformable convolution and a dense feature pyramid for surface defect detection", IEEE Transact. Instrum. Measur., 73, 1-14. https://doi.org/10.1109/TIM.2024.3370962
  21. Hussain, M. (2024), Small-scale Computational Vibration of Carbon Nanotubes: Composite Structure, CRC Press. 
  22. Iijima, S. (1991), "Helical microtubules of graphitic carbon", Nature, 354(7), 56-58. https://doi.org/10.1038/354056a0
  23. Jalili, B., Emad, M., Jalili, P., Ganji, D.D., Saleem, S. and Tageldin, E.M. (2023a), "Thermal analysis of boundary layer nanofluid flow over the movable plate with internal heat generation, radiation, and viscous dissipation", Case Stud. Thermal Eng., 49, p. 103203. https://doi.org/10.1016/j.csite.2023.103203
  24. Jalili, B., Shateri, A., Akgül, A., Bariq, A., Asadi, Z., Jalili, P. and Ganji, D.D. (2023b), "An investigation into a semi-porous channel's forced convection of nano fluid in the presence of a magnetic field as a result of heat radiation", Scientific Reports, 13(1), p. 18505. https://doi.org/10.1038/s41598-023-44275-4
  25. Jena, S.K., Chakraverty, S., Malikan, M. and Tornabene, F. (2021), "Stability analysis of single-walled carbon nanotubes embedded in winkler foundation placed in a thermal environment considering the surface effect using a new refined beam theory", Mech. Based Des. Struct. Mach., 49(4), 581-595. https://doi.org/10.1080/15397734.2019.1698437
  26. Jiang, X., Zhang, W., Wang, X. and Liu, L. (2024), "High deformation/damage localization accuracy of fibrous composites through deep-learning of single channel data from carbon nanotube sensors", Compos. Part A: Appl. Sci. Manuf., 187, p. 108512. https://doi.org/10.1016/j.compositesa.2024.108512
  27. Liu, K., Jiao, S., Nie, G., Ma, H., Gao, B., Sun, C., Xin, D., Saha, T.K. and Wu, G. (2024a), "On image transformation for partial discharge source identification in vehicle cable terminals of high-speed trains", High Voltage, 9(5), 1090-1100. https://doi.org/10.1049/hve2.12487
  28. Liu, X., Tan, J. and Long, S. (2024b), "Multi-axis fatigue load spectrum editing for automotive components using generalized S-transform", Int. J. Fatigue, 188, p. 108503. https://doi.org/10.1016/j.ijfatigue.2024.108503
  29. Mesbah, H.A. and Benzaid, R. (2017), "Damage-based stressstrain model of RC cylinders wrapped with CFRP composites", Adv. Concrete Constr., Int. J., 5(5), 539-561. https://doi.org/10.12989/acc.2017.5.5.539
  30. Miyashiro, D., Taira, H., Hamano, R., Reserva, R.L. and Umemura, K. (2020), "Mechanical vibration of single-walled carbon nanotubes at different lengths and carbon nanobelts by modal analysis method", Compos. Part C: Open Access, 2, p. 100028. https://doi.org/10.1016/j.jcomc.2020.100028
  31. Najafizadeh, M.M. and Isvandzibaei, M.R. (2007), "Vibration of (FGM) cylindrical shells based on higher order shear deformation plate theory with ring support", Acta Mechanica, 191, 75-91. https://doi.org/10.1007/s00707-006-0438-0
  32. Natsuki, T., Ni, Q.Q. and Endo, M. (2008), "Vibrational analysis of fluid-filled carbon nanotubes using the wave propagation approach", Appl. Phys. A, 90, 441-445. https://doi.org/10.1007/s00339-007-4297-x
  33. O'connell, M.J. (2006), Carbon Nanotubes: Properties and Applications, CRC press.
  34. Pourasghar, A., Yang, W., Brigham, J. and Chen, Z. (2021), "Nonlocal thermoelasticity: Transient heat conduction effects on the linear and nonlinear vibration of single-walled carbon nanotubes", Mech. Based Des. Struct. Mach., 1-17. https://doi.org/10.1080/15397734.2021.1985516
  35. Qazaq, A., Hussain, M., Mujalli, M. and Tounsi, A. (2022), "Fundamental computer assessment of ring support with exponent of trigonometric function: Safety geometrical perfection", Adv. Concrete Constr., Int. J., 14(6), 381-390. https://doi.org/10.12989/acc.2022.14.6.381
  36. Qian, Y., Liu, C., Yuan, Y., Xu, J., Wang, P. and Wang, K. (2025), "Numerical characterization and formation process study of rail light bands in high-speed turnout areas", Eng. Fail. Anal., 168, p. 109083. https://doi.org/10.1016/j.engfailanal.2024.109083
  37. Ren, Z., Lan, Y. and Wang, Y. (2011), Aligned Carbon Nanotubes: Physics, Concepts, Fabrication and Devices, Springer Science & Business Media.
  38. Ren, D., Wang, C., Wei, X., Zhang, Y., Han, S. and Xu, W. (2025), "Harmonizing physical and deep learning modeling: A computationally efficient and interpretable approach for property prediction", Scripta Materialia, 255, p. 116350. https://doi.org/10.1016/j.scriptamat.2024.116350
  39. Rouhi, H., Bazdid-Vahdati, M. and Ansari, R. (2015), "RayleighRitz vibrational analysis of multi-walled carbon nanotubes based on the nonlocal Flügge shell theory", J. Compos., 2025(1), p. 750392. https://doi.org/10.1155/2015/750392
  40. Sakhaee-Pour, A., Ahmadian, M.T. and Vafai, A. (2009), "Vibrational analysis of single-walled carbon nanotubes using beam element", Thin-Wall. Struct., 47(6-7), 646-652. https://doi.org/10.1016/j.tws.2008.11.002
  41. Samadvand, H. and Dehestani, M. (2020), "A stress-function variational approach toward CFRP-concrete interfacial stresses in bonded joints", Adv. Concrete Constr., Int. J., 9(1), 43-54. https://doi.org/10.12989/acc.2020.9.1.043
  42. Shakouri, A., Lin, R. and Ng, T. (2009), "Free flexural vibration studies of double-walled carbon nanotubes with different boundary conditions and modeled as nonlocal Euler beams via the Galerkin method", J. Appl. Phys., 106(9), p. 094307. https://doi.org/10.1063/1.3239993
  43. Shen, Y., Lu, Q. and Li, Y. (2023), "Design Criterion and Analysis of Hybrid-Excited Vernier Reluctance Linear Machine With Slot Halbach PM Arrays", IEEE Transact. Indust. Electron., 70(5), 5074-5084. https://doi.org/10.1109/TIE.2022.3183278
  44. Shi, G., Deng, S., Wang, B., Feng, C., Zhuang, Y. and Wang, X. (2024a), "One for all: A unified generative framework for image emotion classification", IEEE Transact. Circuits Syst. Video Technol., 34(8), 7057-7068. https://doi.org/10.1109/TCSVT.2023.3341840
  45. Shi, H., Hayat, M. and Cai, J. (2024b), "Unified Open-Vocabulary Dense Visual Prediction", IEEE Transact. Multimedia, 26, 8704-8716. https://doi.org/10.1109/TMM.2024.3381835 
  46. Shi, H., Dao, S.D. and Cai, J. (2025), "LLMFormer: Large language model for open-vocabulary semantic segmentation", Int. J. Comput. Vision, 133(2), 742-759. https://doi.org/10.1007/s11263-024-02171-y
  47. Shu, X., Li, J. and Shen, M. (2022), "A coupled 2D RBSMVoronoi model for simulating fracture behaviors of plain concrete components", Adv. Concrete Constr., Int. J., 14(6), 391-400. https://doi.org/10.12989/acc.2022.14.6.391
  48. Storch, J.A. and Elishakoff, I. (2013), "Analytical solutions to the free vibration of a doublewalled carbon nanotube carrying a bacterium at its tip", J. Appl. Phys., 114(17), p. 174309. https://doi.org/10.1063/1.4829014
  49. Wang, J. and Gao, Y. (2016), "Nonlocal orthotropic shell model applied on wave propagation in microtubules", Appl. Mathe. Modell., 40(11-12), 5731-5744. https://doi.org/10.1016/j.apm.2016.01.013
  50. Wang, S., He, J., Fan, J., Sun, P. and Wang, D. (2023), "A timedomain method for free vibration responses of an equivalent viscous damped system based on a complex damping model", J. Low Freq. Noise Vib. Active Control, 42(3), 1531-1540. https://doi.org/10.1177/14613484231157514
  51. Wang, H., Hou, Y., He, Y., Wen, C., Giron-Palomares, B., Duan, Y., Gao, B., Vavilov, V.P. and Wang, Y. (2024a), "A Physicalconstrained decomposition method of infrared thermography: Pseudo restored heat flux approach based on Ensemble Bayesian Variance Tensor Fraction", IEEE Transact. Indust. Inform., 20(3), 3413-3424. https://doi.org/10.1109/TII.2023.3293863
  52. Wang, K., Cao, J., Ye, J., Qiu, Z. and Wang, X. (2024b), "Discrete element analysis of geosynthetic-reinforced pile-supported embankments", Constr. Build. Mater., 449, p. 138448. https://doi.org/10.1016/j.conbuildmat.2024.138448
  53. Wang, Z., Zhang, C., Chen, Z., Hu, W., Lu, K., Ge, L. and Wang, Z. (2024c), "ACR-Net: learning high-accuracy optical flow via adaptive-aware correlation recurrent network", IEEE Transact. Circuits Syst. Video Technol., 34(10), 9064-9077. https://doi.org/10.1109/TCSVT.2024.3395636
  54. Wang, Y., Hui, Y., Chen, X., Zhao, D., Cheng, S., Zhu, R., Sun, L., Cui, Y., Sun, P., Gao, Y. and Zhang, J. (2025), "Perforated piezoresistive film-based flexible bidirectional strain sensors for large bending deformation detection and health monitoring of glass fiber-reinforced polymers", Compos. Part B: Eng., 293, p. 112111. https://doi.org/10.1016/j.compositesb.2025.112111
  55. Xiong, J. and Chen, Y. (2025), "RBFNN-Based Parameter Adaptive Sliding Mode Control for an Uncertain TQUAV With Time-Varying Mass", Int. J. Robust Nonlinear Control. https://doi.org/10.1002/rnc.7932
  56. Xu, K.Y., Aifantis, E.C. and Yan, Y.H. (2008), "Vibrations of double walled carbon nanotubes with different boundary conditions between inner and outer tubes", J. Appl. Mech., 75(2), p. 021013. https://doi.org/10.1115/1.2793133
  57. Yakobson, B.I., Campbell, M.P., Brabec, C.J. and Bemholc J. (1997), "High strain rate fracture and C-chain unravelling in carbon nanotubes", Comput. Mater. Sci., 8(4), 341-348. https://doi.org/10.1016/S0927-0256(97)00047-5
  58. Yoon, J., Ru, C.Q. and Mioduchowski, A. (2005), "Terahertz vibration of short carbon nanotubes modeled as Timoshenko beams", J. Appl. Mech., 72(1), 10-17. https://doi.org/10.1115/1.1795814
  59. Yu, H., Wang, H. and Lian, Z. (2022), "An assessment of seal ability of tubing threaded connections: a hybrid empiricalnumerical method", J. Energy Resour. Technol., 145(5), p. 052902. https://doi.org/10.1115/1.4056332
  60. Yuan, H., Huang, Y., Gong, T., Wang, Y., Jiang, P., Wei, W., Yang, Y., Chai, J., Wu, Z., Wang, X. and Luo, Q. (2024), "Spatial and energetic mapping of traps in FeFET during endurance process by advanced trap characterization platform", IEEE Electron Dev. Lett., 45(12), 2371-2374. https://doi.org/10.1109/LED.2024.3469372
  61. Zhai, Y., Li, S. and Zhang, X. (2025), "Vibration performance of composite doubly-curved shells embedded with damping layer", Int. J. Struct. Stabil. Dyn. https://doi.org/10.1142/S0219455426502652
  62. Zhang, Y.Y., Wang, C.M. and Tan, V.B.C. (2009), "Assessment of Timoshenko beam models for vibrational behavior of singlewalled carbon nanotubes using molecular dynamics", Adv. Appl. Mathe. Mech., 1(1), 89-106. https://global-sci.org/intro/article_detail/aamm/210.html https://doi.org/10.html
  63. Zhang, J., Ye, Y., Li, Z., Chen, X., Wang, W. and Huang, G. (2025), "Unveiling the mechanical anisotropy and related deformation mechanisms of heterostructured Mg alloy laminate with unique texture feature", J. Alloys Compounds, 1010, p. 177404. https://doi.org/10.1016/j.jallcom.2024.177404
  64. Zhao, Y., Liu, K., Hou, H. and Chen, L. (2022), "Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: A phase field study", Mater. Des., 216, p. 110555. https://doi.org/10.1016/j.matdes.2022.110555
  65. Zou, Z., Yang, S. and Zhao, L. (2024), "Dual-loop control and state prediction analysis of QUAV trajectory tracking based on biological swarm intelligent optimization algorithm", Scientific Reports, 14(1), p. 19091. https://doi.org/10.1038/s41598-024-69911-5