Advances in materials Research

  • 제14권3호
  • /
  • Pages.249-268
  • /
  • 2025
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thermo-mechanical stress and deformation analysis of functionally graded cylinder subjected to multiple loading conditions

  • Sanjay Kumar Singh (Department of Mechanical Engineering, Chhatrapati Shivaji Institute of Technology Durg) ;
  • Lakshman Sondhi (Department of Mechanical Engineering, Shri Shankaracharya Technical Campus Bhilai) ;
  • Anil Prakash Singh (Maharana Pratap Polytechnic) ;
  • Rakesh Kumar Sahu (Department of Mechanical Engineering, Visvesvaraya National Institute of Technology) ;
  • Royal Madan (Department of Mechanical Engineering, Graphic Era (Deemed to be University))
  • 투고 : 2025.02.22
  • 심사 : 2025.07.01
  • 발행 : 2025.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, thermo-mechanical elastic stress and deformation analysis of a functionally graded (FG) cylindrical shell, under complex loading states such as angular rotation, thermal load with heat generation, body force, and mechanical loads, are analyzed. FG materials are advanced and futuristic composite materials with gradually varying properties across different surfaces. In this paper, a power law is used for the variation of material properties such as elastic modulus, density, thermal conduction coefficient, and thermal expansion coefficient, offering a better strength-to-weight ratio, better thermal resistance, and durability in critical harsh environments. To increase the lifecycle of a structure, the stresses induced should be minimal. Navier's method is used to solve Euler's governing differential equations with a plane stress condition that reduces the complexity of the second-order. The main aim of this study is to investigate the combined effect of material non-homogeneity with various types of complex loading states on the displacement and stress distribution within the cylinder. This analysis provides valuable insight to enhance the performance, reliability, and integrity of structures in the fields of aerospace, defense, Mechanical, and Civil Engineering.

키워드

참고문헌

  1. Abbas, E.N., Njim, E.K., Jweeg, M.J., Madan, R., Ogaili, A.A.F. and Al-Maliky, F.T. (2025), "Experimental and theoretical analysis of mechanical properties of composite materials with diverse reinforcement types", World J. Eng., ahead-of-print, https://doi.org/10.1108/WJE-07-2024-0433.
  2. Adiga, K., Herbert, M.A., Rao, S.S. and Shettigar, A. (2022), "Applications of reinforcement particles in the fabrication of Aluminium Metal Matrix Composites by Friction Stir Processing - A Review", Manuf. Rev., 9, 26. https://doi.org/10.1051/mfreview/2022025
  3. Allam, O., Draiche, K., Bousahla, A.A., Bourada, F., Tounsi, A., Benrahou, K.H., Mahmoud S.R., Adda Bedia E.A. and Tounsi, A. (2020), "A generalized 4-unknown refined theory for bending and free vibration analysis of laminated composite and sandwich plates and shells", Comput. Concr., 26(2), 185-201. https://doi.org/10.12989/cac.2020.26.2.185
  4. Alhous, Z.F.A., Jweeg, M.J., Njim, E.K., Mouthanna, A., Flayyih, M.A., Madan, R., Khobragade, P. and Rai, P.K. (2025), "Nonlinear frequency and dynamic response of PLA polymeric imperfect FG sandwich plates under hygrothermal conditions", Coupled Syst. Mech., 14(1), 119. https://doi.org/10.12989/csm.2025.14.1.001
  5. Al-Shablle, M., Njim, E.K., Jweeg, M.J. and Al-Waily, M. (2023), "Free vibration analysis of composite face sandwich plate strengthens by Al2O3 and SiO2 nanoparticles materials", Diagnostyka, 24(2), 1-9. https://doi.org/10.29354/diag/162580
  6. Bayat, M., Sahari, B.B., Saleem, M., Ali, A. and Wong, S.V. (2009), "Bending analysis of a functionally graded rotating disk based on the first order shear deformation theory", Appl. Math. Modell., 33(11), 4215-4230. https://doi.org/10.1016/j.apm.2009.03.001
  7. Boss, J.N. and Ganesh, V.K. (2006), "Fabrication and properties of graded composite rods for biomedical applications", Compos. Struct., 74(3), 289-293. https://doi.org/10.1016/j.compstruct.2005.04.030
  8. Dai, H.L. and Fu, Y.M. (2006), "Magnetothermoelastic stress in orthotropic hollow cylinders due to radially symmetric thermal and mechanical loads", Struct. Eng. Mech., 24(6), 699-707. https://doi.org/10.12989/SEM.2006.24.6.699
  9. Daneshmand, S., Vini, M.H., Sajadi, S.M., Mouthanna, A., Jasim, D.J., Hammoodi, K.A., Hekmatifar, M. and Nasajpour-Esfahani, N. (2023), "Numerical and experimental investigations of mechanical, tribological, and electrical properties of laminated Bi-metal Al/SiC/Ni composites", Mater. Today Commun., 37, 107355. https://doi.org/10.1016/j.mtcomm.2023.107355
  10. Draiche, K., Bousahla, A.A., Tounsi, A. and Hussain, M. (2021), "An integral shear and normal deformation theory for bending analysis of functionally graded sandwich curved beams", Arch. Appl. Mech., 91(12), 4669-4691. https://doi.org/10.1007/s00419-021-02005-0
  11. Draiche, K., Tounsi, A., Ibrahim, K.D. and Tlidji, Y. (2024), "An improved mathematical model for static and dynamic analysis of functionally graded doubly-curved shells", Arch. Appl. Mech., 94(6), 1589-1611. https://doi.org/10.1007/s00419-024-02595-5
  12. Ellali, M., Amara, K. and Bouazza, M. (2024), "Thermal buckling of porous FGM plate integrated surfacebonded piezoelectric", Coupled Syst. Mech., 13(2), 171-186. https://doi.org/10.12989/CSM.2024.13.2.171
  13. Garg, A., Belarbi, M.O., Li, L., Chalak, H.D., Tounsi, A. and Zenkour, A.M. (2024), "Comparative study on the buckling analysis of exponential, power and sigmoidal sandwich FGM plates under hygro-thermal conditions", Adv. Mater. Res., 13(6), 431-462. https://doi.org/10.12989/AMR.2024.13.6.431
  14. Hadji, L., Bernard, F., Safa, A. and Tounsi, A. (2021), "Bending and free vibration analysis for FGM plates containing various distribution shape of porosity", Adv. Mater. Res., 10(2), 115-135. https://doi.org/10.12989/amr.2021.10.2.115
  15. Hashemi, S. and Jafari, A.A. (2020), "An analytical solution for nonlinear vibrations analysis of functionally graded plate using modified lindstedt-poincare method", Int. J. Appl. Mech., 12(1), 2050003. https://doi.org/10.1142/S1758825120500039
  16. Jabbari, M., Bahtui, A. and Eslami, M.R. (2009), "Axisymmetric mechanical and thermal stresses in thick short length FGM cylinders", Int. J. Press. Vessel Pip., 86(5), 296-306. https://doi.org/10.1016/j.ijpvp.2008.12.002
  17. Jabbari, M., Sohrabpour, S. and Eslami, M.R. (2002), "Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads", Int. J. Press. Vessel Pip., 79(7), 493-497. https://doi.org/10.1016/S0308-0161(02)00043-1
  18. Kadum Njim, E., Al-Maamori, M.H., Madan, R., Bakhy, S.H., Al-Waily, M., Khobragade, P. and Hadji, L. (2024), "Numerical and analytical investigation of free vibration behavior of porous functionally graded sandwich plates", Mech. Adv. Compos. Struct., 12(3), 555-568. https://doi.org/10.22075/macs.2024.34962.1710
  19. Kumar, A. and Kumar, D. (2021), "Vibration analysis of functionally graded stiffened shallow shells under thermo-mechanical loading", Proceedings of the International Conference on Advances in Materials Processing & Manufacturing Applications, 44, 4590-4595. https://doi.org/10.1016/j.matpr.2020.10.826
  20. Madan, R. and Bhowmick, S. (2020), "A review on application of FGM fabricated using solid-state processes", Adv. Mater. Proc. Technol., 6(3), 608-619. https://doi.org/10.1080/2374068X.2020.1731153
  21. Madan, R. and Bhowmick, S. (2022), "Material modelling and limit angular speed analysis of porous trigonometric functionally graded rotating disk", Adv. Mater. Proc. Technol., 1-13. https://doi.org/10.1080/2374068X.2022.2036043
  22. Madan, R., Saha, K. and Bhowmick, S. (2020), "Limit speeds and stresses in power law functionally graded rotating disks", Adv. Mater. Res., 9(2), 115-131. https://doi.org/10.12989/AMR.2020.9.2.115
  23. Madenci, E., Gulcu, S. and Draiche, K. (2024), "Analytical nonlocal elasticity solution and ANN approximate for free vibration response of layered carbon nanotube reinforced composite beams", Adv. Nano Res., 16(3), 251-263. https://doi.org/10.12989/anr.2024.16.3.251
  24. Mahmoud Hosseini, S. (2014), "Elastic wave propagation and time history analysis in FG nanocomposite cylinders reinforced by carbon nanotubes using a hybrid mesh-free method", Eng. Comput., 31(7), 1261- 1282. https://doi.org/10.1108/EC-12-2012-0312
  25. Najibi, A. and Shojaeefard, M.H. (2016), "Elastic mechanical stress analysis in a 2D-FGM thick finite length hollow cylinder with newly developed material model", Acta Mechanica Solida Sinica, 29(2), 178-191. https://doi.org/10.1016/S0894-9166(16)30106-9
  26. Nejad, M.Z., Jabbari, M. and Ghannad, M. (2015), "Elastic analysis of axially functionally graded rotating thick cylinder with variable thickness under non-uniform arbitrarily pressure loading", Int. J. Eng. Sci., 89, 86-99. https://doi.org/10.1016/j.ijengsci.2014.12.004
  27. Raad, H., Najim, E., Jweeg, M., AlWaily, M., Hadji, L. and Madan, R. (2024), "Vibration analysis of sandwich plates with hybrid composite cores combining porous polymer and foam structures", J. Comput. Appl. Mech., 55(3). https://doi.org/10.22059/jcamech.2024.377658.1121
  28. Rabia, B., Tahar, H.D. and Abderezak, R. (2024), "Interfacial stresses in porous PFGM-RC hybrid beam", Adv. Mater. Res., 13(1), 37-53. https://doi.org/10.12989/AMR.2024.13.1.037
  29. Rahimi, G.H., Arefi, M. and Khoshgoftar, M.J. (2011), "Application and analysis of functionally graded piezoelectrical rotating cylinder as mechanical sensor subjected to pressure and thermal loads", Appl. Math. Mech., 32(8), 997-1008. https://doi.org/10.1007/s10483-011-1475-6
  30. Rahimi, G.H., Arefi, M. and Khoshgoftar, M.J. (2012), "Electro elastic analysis of a pressurized thick-walled functionally graded piezoelectric cylinder using the first order shear deformation theory and energy method", Mechanika, 18(3), 292-300. https://doi.org/10.5755/j01.mech.18.3.1875
  31. Safari, A., Tahani, M. and Hosseini, S.M. (2011), "Two-dimensional dynamic analysis of thermal stresses in a finite-length FG thick hollow cylinder subjected to thermal shock loading using an analytical method", Acta Mechanica, 220(1-4), 299-314. https://doi.org/10.1007/s00707-011-0478-y
  32. Sondhi, L., Sahu, R.K., Kumar, R., Yadav, S., Bhowmick, S. and Madan, R. (2023), "Functionally graded polar orthotropic rotating disks: Investigating thermo-elastic behavior under different boundary conditions", Int. J. Interact. Des. Manuf., 18(1), 159-166. https://doi.org/10.1007/s12008-023-01447-w
  33. Suresh, S. and Mortensen, A. (1997), "Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour", Int. Mater. Rev., 42(3), 85-116. https://doi.org/10.1179/imr.1997.42.3.85
  34. Tutuncu, N. and Temel, B. (2009), "A novel approach to stress analysis of pressurized FGM cylinders, disks and spheres", Compos. Struct., 91(3), 385-390. https://doi.org/10.1016/j.compstruct.2009.06.009
  35. Wang, Y.Q. and Zhao, H.L. (2019), "Free vibration analysis of metal foam core sandwich beams on elastic foundation using Chebyshev collocation method", Arch. Appl. Mech., 89(11), 2335-2349. https://doi.org/10.1007/s00419-019-01579-0
  36. Wang, Y. and Wu, D. (2017), "Free vibration of functionally graded porous cylindrical shell using a sinusoidal shear deformation theory", Aerosp. Sci. Technol., 66, 83-91. https://doi.org/10.1016/j.ast.2017.03.003
  37. Wang, Z.W., Zhang, Q., Xia, L.Z., Wu, J.T. and Liu, P.Q. (2015), "Stress analysis and parameter optimization of an fgm pressure vessel subjected to thermo-mechanical loadings", Procedia Eng., 130, 374-389. https://doi.org/10.1016/j.proeng.2015.12.230
  38. Zine, A., Tounsi, A., Draiche, K., Sekkal, M. and Mahmoud, S.R. (2018), "A novel higher-order shear deformation theory for bending and free vibration analysis of isotropic and multilayered plates and shells", Steel Compos. Struct., 26(2), 125-137. https://doi.org/10.12989/scs.2018.26.2.125