Advances in materials Research

  • 제14권3호
  • /
  • Pages.269-282
  • /
  • 2025
  • /
  • 2234-0912(pISSN)
  • /
  • 2234-179X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Deformation inhomogeneity of the stainless steel - low-carbon steel composite

  • Svetlana A. Barannikova (Strength Physics Laboratory, Institute of Strength Physics and Materials Science, Siberian Branch of Russian Academy of Science) ;
  • Yulia V. Li (Strength Physics Laboratory, Institute of Strength Physics and Materials Science, Siberian Branch of Russian Academy of Science)
  • 투고 : 2023.07.14
  • 심사 : 2025.06.26
  • 발행 : 2025.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

The kinetics of plastic flow localization in low carbon steel/stainless chromium-nickel steel (ASTM A414 grade A / AISI 304) composite under uniaxial tensile testing is studied via digital speckle image correlation method. The types and parameters of local deformation in the base and cladding layers of the composite are determined at different stages of work hardening. It is found that in the low carbon steel basal layer, the distribution of localized deformation at the yield plateau represents a single localized front similar to the Lüders band. In the austenitic steel coating layer, the distribution of localized deformation at the yield plateau represents localized fronts similar to the Portevin-Le Chatelier effect bands.

키워드

과제정보

The authors thank Prof. L.B. Zuev for advice and helpful discussion. This research was carried out using the equipment of the Central Research Center "Nanotech" of the Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences.

참고문헌

  1. Argon, A. (2008), Strengthening Mechanism of Crystal Plasticity, University Press, Oxford, U.K. 
  2. Asaro, R.J. and Lubarda, V.A. (2006), Mechanics of Solid Materials, Cambridge University Press, Cambridge, U.K.
  3. Barannikova, S.A. and Iskhakova, P.V. (2022), "Study of deformation structures maps in metals under tension", PNRPU Mech. Bull., 3, 107-115. https://doi.org/10.15593/perm.mech/2022.3.11
  4. Barannikova, S.A. and Li, Y.V. (2020), "Development Kinetics of the Plastic Wave Front at the Metal Interface", Russ. Phys. J., 63, 731-737. https://doi.org/10.1007/s11182-020-02091-7
  5. Barannikova, S., Zuev, L. and Li, Y. (2018) "Plastic flow heterogeneity and failure of bimetal material", Int. J. Geomate, 14, 112-117. https://doi.org/10.21660/2018.43.3578
  6. Barenblatt, G.I. (1959), "The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks", J. Appl. Math. Mech., 23, 622-636. https://doi.org/10.1016/0021-8928(59)90157-1
  7. Broek, D. (1986), Elementary Engineering Fracture Mechanics, Marinus Nijhoff Publishers, Dordrecht, Germany. https://doi.org/10.1007/978-94-009-4333-9
  8. Dierke, H., Fischer, M., Tutsch, R. and Casarotto, L. (2011), "Optical Extensometer for Tracking Propagations Deformation Bands", Tech. Mess., 78, 211-217. https://doi.org/10.1524/teme.2011.0106
  9. Dodd, R.K., Eilbeck, J.C., Gibbon, J.D., Morris, H.C. (1982), Solitons and Nonlinear Wave Equations, Academic Press, London, U.K.
  10. E, J.C., Huang, J.Y., Bie, B.X., Sun, T., Fezzaa, K., Xiao, X.H., Sun, W. and Luo, S.N. (2016), "Deformation and fracture of explosion-welded Ti/Al plates: A synchrotron-based study", Mater. Sci. Eng. А, 674, 308-317. https://doi.org/10.1016/j.msea.2016.07.125.
  11. Han, C.W. (2005), Continuum Mechanics and Plasticity. Chapmen and Hall, New York, U.S.A. 
  12. Hähner, P. (1994), "Theory of solitary plastic waves", J. Appl. Phys. A, 58, 41-58. https://doi.org/10.1007/BF00331516
  13. Jones, R. and Wykes, C. (1983), Holographic and Speckle Interferometry, Cambridge University Press, Cambridge, U.K.
  14. Li, Y., Gong, M., Wang, K., Li, P., Yang, X. and Tong, W. (2018), "Diffusion behavior and mechanical properties of high chromium cast iron/low carbon steel bimetal", Mater. Sci. Eng. А, 718, 260-266. https://doi.org/10.1016/j.msea.2018.01.111
  15. Li, Z., Lin, Y.C., Zhang, L., Jiang, F., Jiang, Z. and Jiao, S. (2022), "Investigation of compact tensile and fracture mechanical properties of a duplex stainless steel bimetal composite with the interfacial zone", J. Mater. Res. Tech., 19, 809-820. https://doi.org/10.1016/j.jmrt.2022.05.085
  16. Li, Z., Zhao, J., Jiang, F., Liang, X., Zhang, Q., Yuan, X., Jiao, S. and Jiang, Z. (2020) "Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment", Mater. Sci. Eng. А, 787, 139513, 1-24. http://doi.org/10.1016/j.msea.2020.139513
  17. Manach, P.Y., Thuillier, S., Yoon, J.W., Coer, J. and Laurent, H. (2014) "Kinematics of Portevin–le Chatelier bands in simple shear", Int. J. Plast., 58, 66-83. http://doi.org/10.1016/j.ijplas.2014.02.005
  18. Mendenhall, W.M. and Sincich, T.L. (2016), Statistics for Engineering and the Sciences, Chapman and Hall/CRC, New York, U.S.A.
  19. Müller, A., Segel, C., Linderov, M., Vinogradov, A., Weidner, A. and Biermann, H. (2016), "The Portevin–Le Châtelier Effect in a metastable austenitic stainless steel", Metall. Mater. Trans. A., 47, 59-74. https://doi.org/10.1007/s11661-015-2953-x
  20. Ohtsubo, J. and Asakura, T. (1976), "Velocity measurement of a diffuse object by using time-varying speckles", Opt. Quantum Electron., 8, 523-529. https://doi.org/10.1007/BF00620143
  21. Pelleg, J. (2013), Mechanical Properties of Materials, Springer, Dordrecht, Germany. https://doi.org/10.1007/978-94-007-4342-7
  22. Rizov, V. (2012), "Fracture in Composites - An Overview (Part I)", J. Theor. Appl. Mech., 42, 3-42. https://doi.org/10.2478/v10254-012-0006-z
  23. Scott, A. (2003), Nonlinear Science, Emergence and Dynamics of Coherent Structures, University Press, Oxford, U.K.
  24. Seeger, A. and Frank, W. (1987), "Structure formation by dissipative processes in crystals with high defect densities", Nonlinear Phenomena Mater. Sci. Trans. Tech., 125-138, New York, U.S.A.
  25. Shin, H.C., Ha, T.K. and Chang, Y.W. (2001), "Kinetics of deformation induced martensitic transformation in a 304 stainless steel", Scripta Mater., 45 (7), 823-829. https://doi.org 10.1016/S1359-6462(01)01101-0
  26. Srinivasan, N., Raghu, N. and Venkatraman, B. (2012), "Study on Lüders deformation in welded mild steel using infrared thermography and digital image correlation", Adv. Mater. Res., 585, 82-86. https://doi.org/10.4028/www.scientific.net/AMR.585.82
  27. Welford, W.T. (1975), "First order statistics of speckle produced by weak scattering media", Opt. Quantum Electron., 7, 413-416. https://doi.org/10.1007/BF00619839
  28. Xiao, X.F., Ye, S.P., Yin, W.X. and Xue, Q. (2012), "HCWCI/Carbon steel bimetal liner by liquid-liquid compound lost foam casting", J. Iron Steel Res., 19, 13-19. https://doi.org/10.1016/S1006-706X(12)60145-9
  29. Yilmaz, A. (2011), "The Portevin–Le Chatelier effect: a review of experimental findings", Sci. Tech. Adv. Mater., 12, 1-16. https://doi.org/10.1088/1468-6996/12/6/063001
  30. Zaiser, M. (2006), "Scale invariance in plastic flow of crystalline solids", Adv. Phys. 5, 185-245. https://doi.org/10.1080/00018730600583514
  31. Zuev, L.B., Polyakov, S.N. and Gorbatenko, V.V. (2002), "Instrumentation for speckle interferometry and techniques for investigating deformation and fracture", Proc. SPIE, 4900, 1197-1208. https://doi.org/10.1117/12.484526
  32. Zuev, L.B. and Barannikova, S.A. (2019), "Autowave physics of material plasticity", Cryst., 9, 458-488. https://doi.org/10.3390/cryst9090458
  33. Zuev, L.B., Shlyakhova, G.V. and Barannikova, S.A. (2020), "Effect of Radial Forging on the Microstructure and Mechanical Properties of Ti-Based Alloys", Metals, 10, 1488. https://doi.org/10.3390/met10111488
  34. Zuev, L.B. and Khon, Y.A. (2022), "Plastic flow as spatiotemporal structure formation, Part I, Qualitative and quantitative patterns", Phys. Mesomech., 25, 103-110. https://doi.org/10.1134/S1029959922020011