DOI QR코드

DOI QR Code

Characterization of activated carbon produced by bio-waste material

  • Dipali L. Patil (Department of Civil Engineering, COEP Technological University) ;
  • Namdeo A. Hedaoo (Department of Civil Engineering, COEP Technological University)
  • 투고 : 2025.05.15
  • 심사 : 2025.08.30
  • 발행 : 2025.08.25

초록

The rising demand for activated carbon (AC) in filtration, environmental protection, and energy storage necessitates cost-effective and sustainable production methods. Conventional AC production relies on non-renewable resources, leading to environmental concerns and high costs. This study addresses this gap by utilizing biowaste materials, specifically sawdust and walnut shells, for AC synthesis through chemical activation using phosphoric acid. The carbonization process was conducted at 300℃, 600℃, and 700℃, followed by detailed characterization using Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), Proximate Analysis, and CHNSO analysis. Adsorption capacity was assessed using iodine value measurements, which identified 600℃ as the optimal temperature for activation. Carbon, hydrogen, Nitrogen, sulfur, and oxygen (CHNSO) analysis revealed that walnut shell-derived AC contained 36.5% more carbon than sawdust-derived AC, making it superior for energy storage applications. SEM analysis further confirmed a more heterogeneous structure with smaller pores in walnut shell AC, enhancing its adsorption efficiency. The study underscores the potential of biowaste-derived AC as a sustainable alternative, reducing reliance on conventional carbon sources and promoting circular economy principles. These findings contribute to waste valorization efforts, demonstrating an eco-friendly approach to producing high-performance AC while addressing environmental concerns associated with agricultural and industrial waste. Future research should focus on scaling production, optimizing activation processes, and exploring practical applications of biowaste-derived AC in industrial and environmental sectors to enhance its commercial viability.

키워드

과제정보

The research described in this paper was technically supported by the SPPU University, Pune, and the COEP Technological University, Pune by providing chemical laboratory.

참고문헌

  1. Ahmed, A.S., Alsultan, M., Hameed, R.T., Assim, Y.F. and Swiegers, G.F. (2022), "High surface area activated charcoal for water purification", J. Compos. Sci., 6(10), 311. https://doi.org/10.3390/jcs6100311.
  2. Ariany, Z.., Ghina, F., Hanum., A. and Sri, R. (2018), "The potential of AC derived from bio-char waste of bio-oil pyrolysis as an adsorbent", Proceedings of the The 2nd International Conference on Engineering and Technology for Sustainable Development (ICET4SD 2017), 01029. https://doi.org/10.1051/MATECCONF/201815401029
  3. Asadi-Sangachini, Z., Galangash, M.M., Younesi, H. and Nowrouzi, M. (2019), "The feasibility of cost-effective manufacturing activated carbon derived from walnut shells for large-scale CO2 capture", Environ. Sci. Pollut. Res., 26(26), 26542-26552. https://doi.org/10.1007/s11356-019-05842-3.
  4. Batu, M.S., Naes, E. and Kolo, M.M. (2022), "Pembuatan karbon aktif dari limbah sabut pinang asal pulau timor sebagai biosorben logam ca dan mg dalam air tanah", Jurnal Integrasi Proses, 11(1), 21-25. https://doi.org/10.36055/jip.v11i1.13181
  5. Bedane, A., Guo, T., Shirani, B. and Xiao, H. (2023), "Textural characteristics of activated carbons prepared from agricultural residues‐review", Canadian J. Chem. Eng., 101(12), 6718-6739. https://doi.org/10.1002/cjce.24960
  6. Bouchelta, C., Medjram, M., Bertrand, O. and Bellat, J. (2008), "Preparation and characterization of AC from date stones by physical activation with steam", J. Anal. Appl. Pyrolysis, 82(1), 70-77. https://doi.org/10.1016/J.JAAP.2007.12.009.
  7. Coker, E.N., Lujan-Flores, X., Donaldson, B., Yilmaz, N. and Atmanli, A. (2023), "An assessment of the conversion of biomass and industrial waste products to activated carbon", Energies, 16(4), 1606. https://doi.org/10.3390/en1604160645
  8. De Souza, C.C., Ciriano, M.R., da Silva, E.F., de Oliveira, M.A., da Silva Bezerra, A.C., Dumont, M.R., da Silva, A.C. and Machado, A.R.T. (2021), "Activated carbon obtained from cardboard tube waste of immersion thermocouple and adsorption of methylene blue", Biomass Convers. Biorefinery, 13(4), 3297-3308. https://doi.org/10.1007/S13399-021-01428-7
  9. Derya, Ö., Saban, B. and Mehmet, E.E. (2023), "Production of AC from the waste paper by chemical activation method", Int. Adv. Res. Eng. J., 7(1), 52-61. https://doi.org/10.35860/iarej.1222591
  10. Ekpete, O.A. and Horsfall Jr., M. (2011), "Preparation and characterization of AC derived from fluted pumpkin stem waste (Telfairia occidentalis hook f)", Res. J. Chem. Sci., 1(3), 10-17.
  11. Ekpete, O.A., Marcus, A.C. and Osi, V. (2017), "Preparation and characterization of activated carbon obtained from plantain (Musa paradisiaca) fruit stem", J. Chem., 2017(1), 8635615. https://doi.org/10.1155/2017/8635615
  12. Gorbounov, M., Petrovic, B., Ozmen, S., Clough, P. and Soltani, S.M. (2023), "Activated carbon derived from Biomass combustion bottom ash as solid sorbent for CO2 adsorption", Chem. Eng. Res. Des., 194, 325-343. https://doi.org/10.1016/j.cherd.2023.04.057
  13. Granbohm, H., Larismaa, J., Ali, S., Johansson, L.S. and Hannula, S.P. (2018), "Control of the size of silver nanoparticles and release of silver in heat treated SiO2-Ag composite powders", Materials, 11(1), 80. https://doi.org/10.3390/ma11010080
  14. Haji, A.G., Pari, G., Nazar, M. and Habibati, H. (2013), "Characterization of activated carbon produced from urban organic waste", Int. J. Sci. Eng., 5(2), 89-94. https://doi.org/10.12777/IJSE.5.2.89-94
  15. Heidari, N.Z., Dehghani, M., Heidari, M., Javedan, G., Ali, I. and Sillanpää, M. (2020), "Methods for preparation and activation of activated carbon: A review", Environ. Chem. Lett., 18, 393-415. https://doi.org/10.1007/s10311-019-00955-0.
  16. Kaya, M., Şahin, Ö. and Saka, C. (2018), "Preparation and TG/DTG, FT-IR, SEM, BET surface area, iodine number and methylene blue number analysis of activated carbon from pistachio shells by chemical activation". Int. J. Chem. React. Eng., 16(2), 20170060. https://doi.org/10.1515/IJCRE-2017-0060
  17. Khalil, H.P.S., Jawaid, M., Firoozian, P., Rashid, U., Islam, A. and Akil, H. M. (2013), "AC from various agricultural wastes by chemical activation with KOH: preparation and characterization", J. Biobased Mater. Bioenergy, 7(6), 708-714. https://doi.org/10.1166/jbmb.2013.1379
  18. Kim, J., Sohn, M., Kim, D., Sohn, S. and Kwon, Y. (2001), "Production of granular AC from waste walnut shell and itsadsorption characteristics for Cu(2+) ion", J. Hazard. Mater., 85(3), 301-315. https://doi.org/10.1016/S0304-3894(01)00239-4.
  19. Kunusa, W.R., Iyabu, H. and Abdullah, R. (2021), "FTIR, SEM and XRD analysis of activated carbon from sago wastes using acid modification", J. Phys. Conference Series, 1968(1), 012014. https://doi.org/10.1088/1742-6596/1968/1/012014
  20. Li, R, Zhu, G., Tong, Y., Gao, S., Liu, T. (2019), "Effects of the carbonization temperature and intermediate cooling mode on the properties of coal-based activated carbon", Energy, 273, 127177. https://doi.org/10.1016/j.energy.2023.127177
  21. Lozano‐Castelló, D., Lillo-Ródenas, M., Cazorla-Amorós, D. and Linares-Solano, Á. (2001), "Preparation of activated carbons from Spanish anthracite. II. Activation by NaOH", Carbon, 39, 751-759. https://doi.org/10.1016/S0008- 6223(00)00185-8.
  22. Mahind, S.D. and Patil, D. (2022), "COVID-19—assessment of economic and schedule delay impact in Indian construction industry using regression method", Proceedings of the Recent Trends in Construction Technology and Management: Select Proceedings of ACTM 2021, 283-297, Singapore: Springer Nature Singapore. https://doi.org/10.1007/978-981- 19-2145-2_23
  23. Muttil, N., Jagadeesan, S., Chanda, A., Duke, M. and Kumar Singh, S. (2024), "Characterisation of activated carbon derived from carbon black produced by the pyrolysis of waste tyres", Adv. Mater. Proc. Technol., 10(4), 2957-2967. https://doi.org/10.1080/2374068x.2023.2192327
  24. Oladimeji, T., Odunoye, B., Elehinafe, F., Obanla, O. and Odunlami, O. (2021), "Production of AC from sawdust and its efficiency in sewage water treatment", Heliyon, 7. https://doi.org/10.1016/j.heliyon.2021.e05960.
  25. Patil, D. and Hedaoo, N. (2023), "Application of waste biaxially oriented polypropylene sandwiched graphene to enhance properties of asphalt mixes via a wet process", Mater. Today Proc., In Press. https://doi.org/10.1016/j.matpr.2023.05.037
  26. Patil, D. and Hedaoo, N. (2024), "Assessing the rheological behavior of bio-asphalt binder with integrating biowaste-derived activated carbon", Civil Environ. Eng., 20(2), 905-919. https://doi.org/10.2478/cee-2024-0066
  27. Patil, D. and Hedaoo, N. (2025), "Effect of waste plastic and fiber modification on asphalt mixture properties", J. Mater. Eng. Struct. JMES, 12(2), 127-137.
  28. Patil, D. and Hedaoo, N. (2025), "Enhancing asphalt mixture properties through waste plastic and steel fiber additives: A comprehensive study", J. Mater. Eng. Struct. JMES, 12(1), 5-19.
  29. Patil, D., Shinde, S. and Hedaoo, N. (2025), "predicting creep and recovery responses of asphalt binders using machine learning models", Airfield Highway Pavements, 106-119. https://doi.org/10.1061/9780784486238.010
  30. Sahira, J., Mandira, A., Prasad, B.P. and Ram, R.P. (2013), "Effect of activating agents on the activated carbons prepared from lapsi seed stone", Res. J. Chem. Sci., 3(5), 19-24.
  31. Schaubeder, J.B., Guizani, C., Selinger, J., Mautner, A., Hummel, M. and Spirk, S. (2023), "Design of experiments as a tool to guide the preparation of tailor-made activated carbons", Sci. Rep., 13(1), 3977. https://doi.org/10.1038/s41598-023-30642-8
  32. Sevilla, M. and Mokaya, R. (2014), "Energy storage applications of activated carbons: supercapacitors and hydrogen storage", Energy Environ. Sci., 7, 1250-1280. https://doi.org/10.1039/C3EE43525C.
  33. Shao, J., Wang, Y., Liu, C., Xiao, Q., Demir, M., Al Mesfer, M.K., ... and Hu, X. (2025), "Advanced microporous carbon adsorbents for selective CO₂ capture: Insights into heteroatom doping and pore structure optimization", J. Anal. Appl. Pyrolysis, 186, 106946. https://doi.org/10.1016/j.jaap.2024.106946
  34. Shell, S.V., Horsfall, M., Verla, E., Spiff, A. and Ekpete, O. (2012), "Preparation and characterization of AC from fluted pumpkin (Telfairia Occidentalis Hook. F) seed shell", Asian J. Natural Appl. Sci., 1, 39-50.
  35. Shrestha, R.M. (2017), "Characterization of activated carbons prepared from a locally available material by iodine number". J. Inst. Eng., 13(1), 139-144. https://doi.org/10.3126/JIE.V13I1.20359
  36. Soelberg, N. (2007), "Off-Gas Mercury Control Using Sulfur-Impregnated Activated Carbon – Test Results", 1-15. https://www.osti.gov/biblio/912449
  37. Sugumaran, P., Susan, V., Ravichandran, P. and Seshadri, S. (2012), "Production and characterization of AC from banana empty fruit bunch and delonix regia fruit pod", J. Sust. Energy Environ., 3, 125-132.
  38. Vernon-Parry, K.D. (2000), "Scanning electron microscopy: An introduction", III-Vs Review, 13(4), 40-44. https://doi.org/10.1016/S0961-1290(00)80006-X
  39. Won, M., Cho, W., Chang, J.M., Soo, P.J. and Lee, J.Y. (2022), "Characterization of waste wood biochar-based activated carbon synthesized by hydrothermal carbonization", J. Korea Soc. Waste Manage, 39(3), 280-289. https://doi.org/10.9786/kswm.2022.39.3.280
  40. Wong, S., Ngadi, N., Inuwa, I. and Hassan, O. (2018), "Recent advances in applications of AC from biowaste for wastewater treatment: A short review", J. Clean. Prod., 175, 361-375. https://doi.org/10.1016/J.JCLEPRO.2017.12.059.
  41. Xu, Q., Wang, J., Feng, J., Liu, C., Xiao, Q., Demir, M., ... and Hu, X. (2025), "D-glucose-derived S-doped porous carbon: Sustainable and effective CO2 adsorption", Colloids Surf. A, 709, 136054. https://doi.org/10.1016/j.colsurfa.2024.136054
  42. Yahya, M., Al-Qodah, Z. and Ngah, C. (2015), "A review of agricultural bio-waste materials as potential sustainable precursors for AC production", Renew. Sust. Energy Rev., 46, 218-235. https://doi.org/10.1016/J.RSER.2015.02.051.
  43. Yunus, N. (2020), "Activated carbon: A versatile material for environmental applications", J. Environ. Chem. Eng., 8(5), 103997.
  44. Yunus, Z.M., Yashni, G., Al-Gheethi, A., Othman, N., Hamdan, R. and Ruslan, N.N. (2022), "Advanced methods for AC from agriculture wastes, a comprehensive review", Int. J. Environ. Anal. Chem., 102(1), 134-158. https://doi.org/10.1080/03067319.2020.1717477
  45. Zhang, X. and Huang, Y. (2019), "Preparation method of AC for measuring gas mercury and activated carbon", 1235-1242. https://doi.org/10.1016/j.cej.2018.10.134
  46. Zhi, Y., Shao, J., Liu, C., Xiao, Q., Demir, M., Al Mesfer, M.K., ... and Hu, X. (2025), "High-performance CO2 adsorption with P-doped porous carbons from lotus petiole biomass", Sep. Purif. Technol., 361, 131253. https://doi.org/10.1016/j.seppur.2024.131253