Advances in concrete construction

  • 제20권4호
  • /
  • Pages.305-324
  • /
  • 2025
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Foldability-dependent vibrational characteristics of graphene origami composite sandwich cylindrical panel

  • Rahadian Zainul (Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Negeri Padang) ;
  • Mohanad Hatem Shadhar (Researcher Fellow at Asia Pacific University of Technology and Innovations (APU)) ;
  • Y.M. Kadhim (Department of Civil Engineering, College of Engineering, Al-Iraqia University) ;
  • C. Manjunath (Department of Mechanical Engineering, School of Engineering and Technology, JAIN (Deemed to be University)) ;
  • Raman Kumar (Department of Mechanical Engineering, Rayat Bahra University) ;
  • Raghda Ali Bakr (Department of Medical Laboratory Technics, College of Health and Medical Technology, Alnoor University) ;
  • Ahmed Elawady (College of Technical Engineering, The Islamic University) ;
  • Mohd Abul Hasan (Civil Engineering Department, College of Engineering, King Khalid University) ;
  • Saiful Islam (Civil Engineering Department, College of Engineering, King Khalid University)
  • 투고 : 2024.09.03
  • 심사 : 2025.07.21
  • 발행 : 2025.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

This research develops a higher-order vibrational model for graphene origami-reinforced composite cylindrical panels operating in thermal environments. The formulation incorporates foldability-dependent constitutive relations through modified micromechanical coefficients that capture temperature-induced property transitions. Foldability concept is used for the graphene origami in which transforms graphene from a 2D material into a reconfigurable 3D platform, merging nanoscale precision with macroscale functionality. The core innovation leverages graphene's geometric reconfiguration capability-transforming 2D sheets into programmable 3D architectures to achieve synergetic nanoscale precision and macrostructure functionality. Kinematic relations in cylindrical coordinates integrate higher-order bending, transverse shear, and thickness stretching functions. Governing equations derive from Hamilton's principle, explicitly incorporating pre-stress from thermo-electro-magnetic loads. Vibration suppression correlates with increased crease density and thermal exposure, while origami concentration enhances damping capacity. A diminish in vibration responses is detected with an increase in foldability parameter and thermal loads. An enhanced output is detected with an increase in the origami content and decrease in the folding parameter.

키워드

과제정보

The authors extend their appreciation to the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under grant number RGP2/195/46.

참고문헌

  1. Adab, N. and Arefi, M. (2022), "Vibrational behavior of truncated conical porous GPL-reinforced sandwich micro/nano-shells", Eng. Comput., 39(1), 419-443. https://doi.org/10.1007/s00366-021-01580-8
  2. Ait Atmane, H., Tounsi, A. and Bernard, F. (2017), "Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations", Int. J. Mech. Mater. Des., 13, 71-84. https://doi.org/10.1007/s10999-015-9318-x
  3. Alibeigloo, A. (2014), "Free vibration analysis of functionally graded carbon nanotube reinforced composite cylindrical panel embedded in piezoelectric layers by using theory of elasticity", Eur. J. Mech. A/Solids, 44, 104-115. https://doi.org/10.1016/j.euromechsol.2013.10.002
  4. Amiri, M., Loghman, A. and Arefi, M. (2023), "Creep analysis of plates made of functionally graded Al-SiC material subjected to thermomechanical loading", Adv. Concrete Constr., Int. J., 15(2), 115-126. https://doi.org/10.12989/acc.2023.15.2.115
  5. Arefi, M. (2018), "Nonlocal free vibration analysis of a doubly curved piezoelectric nano shell", Steel Compos. Struct., Int. J., 27(4), 479-493. https://doi.org/10.12989/scs.2018.27.4.479
  6. Arefi, M. and Bidgoli, E.M.R. (2019), "Electro-elastic displacement and stress analysis of the piezoelectric doubly curved shells resting on Winkler's foundation subjected to applied voltage", Mech. Adv. Mater. Struct., 26(23), 1981-1994. https://doi.org/10.1080/15376494.2018.1455937
  7. Arefi, M. and Civalek, O. (2020), "Static analysis of functionally graded composite shells on elastic foundations with nonlocal elasticity theory", Arch. Civil Mech. Eng., 20(1), 1-17. https://doi.org/10.1007/s43452-020-00032-2
  8. Arefi, M. and Kiani, M. (2020), "Magneto-electro-mechanical bending analysis of three-layered exponentially graded microplate with piezomagnetic face-sheets resting on Pasternak's foundation via MCST", Mech. Adv. Mater. Struct., 27(5), 383-395. htps://doi.org/10.1080/15376494.2018.1473538
  9. Arefi, M. and Rahimi, G.H. (2012), "The effect of nonhomogeneity and end supports on the thermo elastic behavior of a clamped-clamped FG cylinder under mechanical and thermal loads", Int. J. Pres. Ves. Piping., 96-97, 30-37. https://doi.org/10.1016/j.ijpvp.2012.05.009
  10. Arefi, M. and Zenkour, A.M. (2016), "Employing sinusoidal shear deformation plate theory for transient analysis of three layers sandwich nanoplate integrated with piezo-magnetic face-sheets", Smart Mater. Struct., 25(11), p. 115040. https://doi.org/10.1088/0964-1726/25/11/115040
  11. Arefi, M. and Zenkour, A.M. (2017), "Thermo-electro-magneto-mechanical bending behavior of size-dependent sandwich piezomagnetic nanoplates", Mech. Res. Commun., 84, 27-42. https://doi.org/10.1016/j.mechrescom.2017.06.002
  12. Arefi, M. and Zenkour, A.M. (2019), "Influence of magneto-electric environments on size-dependent bending results of three-layer piezomagnetic curved nanobeam based on sinusoidal shear deformation theory", J. Sandw. Struct. Mater., 21(8), 2751-2778. https://doi.org/10.1177/1099636217723186
  13. Arefi, M., Mohammad-Rezaei Bidgoli, E. and Civalek, O. (2022), "Bending response of FG composite doubly curved nanoshells with thickness stretching via higher-order sinusoidal shear theory", Mech. Based Des. Struct. Mach., 50(7), 2350-2378. https://doi.org/10.1080/15397734.2020.1777157
  14. Arshadi, K. and Arefi, M. (2024), "Free vibration analysis of sandwich cylindrical panel composed of graphene nanoplatelets reinforcement core integrated with Piezoelectric Face-sheets, Steel Compos. Struct., Int. J., 50(1), 63-75. https://doi.org/10.12989/scs.2024.50.1.063
  15. Asghar, S., Naeem, M.N., Khadimallah, M.A., Hussain, M., Iqbal, Z. and Tounsi, A. (2020), "Effect of chiral structure for free vibration of DWCNTs: Modal analysis", Adv. Concrete Constr., Int. J., 9(6), 577-588. https://doi.org/10.12989/acc.2020.9.6.577
  16. Azrar, L., Belouettar, S. and Wauer, J. (2008), "Nonlinear vibration analysis of actively loaded sandwich piezoelectric beams with geometric imperfections", Comput. Struct., 86(23-24), 2182-2191. https://doi.org/10.1016/j.compstruc.2008.06.006
  17. Bai, B., Xu, T., Nie, Q. and Li, P. (2020), "Temperature-driven migration of heavy metal Pb2+ along with moisture movement in unsaturated soils", Int. J. Heat. Mass. Transf., 153, p. 119573. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119573
  18. Bai, B., Bai, F., Li, X., Nie, Q., Jia, X. and Wu, H. (2022), "The remediation efficiency of heavy metal pollutants in water by industrial red mud particle waste", Env. Tech. Innov., 28, p. 102944. https://doi.org/10.1016/j.eti.2022.102944
  19. Bai, B., Bai, F., Nie, Q. and Jia, X. (2023), "A high-strength red mud–fly ash geopolymer and the implications of curing temperature", Powder. Tech., 416, p. 118242. https://doi.org/10.1016/j.powtec.2023.118242
  20. Bai, B., Zhang, B., Ji, Y. and Zong, Y. (2025), "A thermodynamic multi-field model for unsaturated sulfate-saline soils considering crystallization process", Comput. Geotech., 184, p. 107251. https://doi.org/10.1016/j.compgeo.2025.107251
  21. Bao, W., Liu, H., Wang, F., Du, J., Wang, Y., Li, H. and Ye, X. (2024), "Keyhole critical failure criteria and variation rule under different thicknesses and multiple materials in K-TIG welding", J. Manufact. Proc., 126, 48-59. https://doi.org/10.1016/j.jmapro.2024.07.093
  22. Bidgoli, E.M.R. and Arefi, M. (2023), "Dynamic results of GNPRC sandwich shells", Steel Compos. Struct., Int. J., 48(3), 263-273. https://doi.org/10.12989/scs.2023.48.3.263
  23. Bidgoli, E.M.R., Arefi, M. and Mohammadimehr, M. (2020), "Free vibration analysis of honeycomb doubly curved shell integrated with CNT-reinforced piezoelectric layers", Mech. Based Des. Struct. Mach., 50(12), 4409-4440. https://doi.org/10.1080/15397734.2020.1836969
  24. Cai, K., Sun, S., Shi, J. and Qin, Q.H. (2021), "Carbon-nanotube Nanomotor Driven by Graphene Origami", Phys. Rev. Appl., 15, p. 054017. https://doi.org/10.1103/PhysRevApplied.15.054017
  25. Chen, Z., Pu, Q., Zhu, L. and Zhou, W. (2025a), "Creep behaviour between resilient wheels and rails in a metro system", Veh. Syst. Dyn., 1-21. https://doi.org/10.1080/00423114.2025.2494861
  26. Chen, Z., Zhou, W., Kuang, H., Chen, Z., Yang, J., Chen, Z. and Chen, F. (2025b), "Dynamic model and vibration of rack vehicle on curve line", Veh. Syst. Dyn., 1-19. https://doi.org/10.1080/00423114.2025.2494835
  27. Deng, K., Yang, L., Lu, Y. and Ma, S. (2024), "Multitype chatter detection via multichannelinternal and external signals in robotic milling", Measurement, 229, p. 114417. https://doi.org/10.1016/j.measurement.2024.114417
  28. Du, Y., Keller, T., Song, C., Wu, L. and Xiong, J. (2021), "Origami-inspired carbon fiber-reinforced composite sandwich materials – Fabrication and mechanical behavior", Compos. Sci. Tech., 205, p. 08667. https://doi.org/10.1016/j.compscitech.2021.108667
  29. Du, J., Liu, H., Wang, F., Bao, W. and Li, H. (2024), "Solidification microstructure reconstruction and its effects on phase transformation, grain boundary transformation mechanism, and mechanical properties of TC4 alloy welded joint", Metall. Mater. Trans. A, 55, 1193-1206. https://doi.org/10.1007/s11661-024-07317-8
  30. Du, Y., Liu, Y., Zhou, F., Li, Z., Liu, K. and An, L. (2025), "Investigation on dynamic deformation and damage of steel ribbon wound vessel for hydrogen storage under fragment impact loading", J. Press. Vessel Tech., 147, 1-19. https://doi.org/10.1115/1.4068189
  31. Fan, Y. and Shen, H.S. (2022), "Non-symmetric stiffness of origami-graphene metamaterial plates", Compos. Struct., 297, p. 115974. https://doi.org/10.1016/j.compstruct.2022.115974
  32. Feng, G., Xie, W., Jiang, F., Shao, C., Yu, J., Wu, Q., Zhang, Q., Yang, Q., Jin, W. and Liu, J. (2023a), "Non-solvent displacement nonaqueous precipitation method for core-shell materials preparation: Synthesis of C@ZrSiO4 black pigment", Ceram. Int., 49(23), 38148-38156. https://doi.org/10.1016/j.ceramint.2023.09.145
  33. Feng, G., Zheng, E., Jiang, F., Hu, Z., Fu, H., Li, Y., Meng, H., Wu, Q., Liu, J., Yang, Q. and Jiang, W. (2023b), "Preparation of novel porous hydroxyapatite sheets with high Pb2+ adsorption properties by self-assembly non-aqueous precipitation method", Ceram. Int., 49(18), 30603-30612. https://doi.org/10.1016/j.ceramint.2023.07.013
  34. Feng, G., Huang, X., Zheng, E., Jiang, F., Yang, Q., Jin, W., Wu, Q., Liu, J., Wang, D. and Huang, Y. (2024), "Non-solvent displacement nonaqueous precipitation fabrication of novel foldable HAp ceramic paper without fiber and its performance", Ceram. Int., 50(17), 29819-29830. https://doi.org/10.1016/j.ceramint.2024.05.277
  35. Feng, Y., Shi, X.J., Lu, X.Q., Sun, W., Liu, K.P. and Fei, Y.F. (2025), "Predictions of friction and wear in ball bearings based on a 3D point contact mixed EHL model", Surf. Coatings. Tech., 502, p. 131939. https://doi.org/10.1016/j.surfcoat.2025.131939
  36. Gao, J. (2017), "Friction coefficient estimation of the clutch in automatic transmission based on improved persistent excitation condition", In: 2017 Chinese Automation Congress (CAC), Jinan, China, pp. 5647-5647. https://doi.org/10.1109/CAC.2017.8243789
  37. Gao, J. and Liu, Z. (2010a), "Adaptive estimator for the friction characteristics of the clutch in automatic transmission", Proceedings of the 29th Chinese Control Conference, Beijing, China, pp. 6004-6009.
  38. Gao, J. and Liu, Z. (2010b), "Static output feedback control of the linear system with parameter uncertainties", In: 2010 8th World Congress on Intelligent Control and Automation, Jinan, China, pp. 503-508. https://doi.org/10.1109/WCICA.2010.5553766
  39. Gao, J. and Shen, T. (2017), "Cylinder pressure sensor-based real-time combustion phase control approach for SI engines", IEEJ Trans. Elect. Electron. Eng., 12(2) 244-250. https://doi.org/10.1002/tee.22371
  40. Gao, J., Wu, Y. and Shen, T. (2016), "ISA Transactions Experimental comparisons of hypothesis test and moving average based combustion phase controllers", ISA. Trans., 65, 504-515. https://doi.org/10.1016/j.isatra.2016.09.003
  41. Gao, J., Wu, Y. and Shen, T. (2017), "On-line statistical combustion phase optimization and control of SI gasoline engines", Appl. Therm. Eng., 112, 1396-1407. https://doi.org/10.1016/j.applthermaleng.2016.10.183
  42. Ghazwani, M.H., Alnujaie, A., Van Vinh, P. and Tounsi, A. (2024), "A quasi-3D nonlocal theory for free vibration analysis of functionally graded sandwich nanobeams on elastic foundations", Adv. Concete Constr., Int. J., 16(3), 313-324. https://doi.org/10.12989/anr.2024.15.3.313
  43. Gorodtsov, V.A., Lisovenko, D.S. and Lim, T.C. (2018), "Three-layered plate exhibiting auxeticity based on stretching and bending modes", Compos. Struct., 194, 643-651. https://doi.org/10.1016/j.compstruct.2018.03.092
  44. Guenaneche, B., Benyoucef, S., Tounsi, A. and Adda Bedia, E.A. (2019), "Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation", Adv. Concrete Constr., Int. J., 7(3), 151-166. https://doi.org/10.12989/acc.2019.7.3.151
  45. Guo, R., Qi, L., Mo, Z., Zhang, H., Feng, H. and Yang, S. (2019), "SiO2@Graphene Composite Materials Obtained through Different Methods Used as Substrate Materials", Silicon, 11, 1261-1266. https://doi.org/10.1007/s12633-018-0058-z
  46. Guo, L., Zhao, S., Guo, Y., Yang, J. and Kitipornchai, S. (2023), "Bandgaps in functionally graded phononic crystals containing graphene origami-enabled metamaterials", Int. J. Mech. Sci., 240, p. 107956. https://doi.org/10.1016/j.ijmecsci.2022.107956
  47. He, D., Xu, H., Wang, M. and Wang, T. (2024), "Transmission and dissipation of vibration in a dynamic vibration absorber-roller system based on particle damping technology", Chinese J. Mech. Eng., 37(1), p. 108. https://doi.org/10.1186/s10033-024-01107-4
  48. He, D., Xu, H., Wang, Y., Wang, M., Duan, Z., Yang, N. and Wang, T. (2025), "Research on vertical vibration characteristics of rolling mill based on magnetorheological fluid damper absorber", Mech. Syst. Signal Process., 224, p. 112203. https://doi.org/10.1016/j.ymssp.2024.112203
  49. Hou, Y., Tang, K., Wang, J., Xie, D. and Zhang, H. (2022), "Assortative mating on blood type: Evidence from one million Chinese pregnancies", Proceedings of the National Academy of Sciences, 119(51), p. 2209643119. https://doi.org/10.1073/pnas.2209643119
  50. Hou, T., Liu, X., Li, Z., Wang, Y., Chen, T. and Huang, B. (2025), "Numerical investigation of cavitation induced noise and noise reduction mechanism for the leading-edge protuberances", Appl. Ocean. Res., 154, p. 104361. https://doi.org/10.1016/j.apor.2024.104361
  51. Khadimallah, M.A., Harbaoui, I., Hussain, M., Qazaq, A., Ali, E. and Tounsi, A. (2022), "Polymers in construction: A brief review" Adv. Concrete Constr., Int. J., 13(2), 113-121. https://doi.org/10.12989/acc.2022.13.2.113
  52. Kiani, M. and Arefi, M. (2023), "Nonlocal bending characteristics of nanoplate reinforced by functionally graded GPLs exposed to thermo-mechanical loads resting on the Pasternak's foundation", Adv. Concrete Constr., Int. J., 15(2), 97-114. https://doi.org/10.12989/acc.2023.15.2.097
  53. Li, J., Li, S., Tian, G. and Shang, H. (2019a), "Muscle tension training method for series elastic actuator (SEA) based on gain-scheduled method", Robot. Autonom. Syst., 121, p. 103253. https://doi.org/10.1016/j.robot.2019.103253
  54. Li, S., Li, J., Tian, G. and Shang, H. (2019b), "Variable stiffness control for SEAs in rehabilitation training", Adv. Robot., 33(7-8), 424-438. https://doi.org/10.1080/01691864.2019.1602894
  55. Li, J., Zhu, X., Feng, C., Wen, M. and Zhang, Y. (2025), "A simple and efficient three-dimensional spring element model for pore seepage problems", Eng. Anal. Boundary. Elem., 176, p. 106225. https://doi.org/10.1016/j.enganabound.2025.106225
  56. Liu, X., Tan, J. and Long, S. (2024), "Multi-axis fatigue load spectrum editing for automotive components using generalized S-transform", Int. J. Fatigue, 188, p. 108503. https://doi.org/10.1016/j.ijfatigue.2024.108503
  57. Liu, Y., Su, J., Wang, Z., He, D., Wang, T. and Huang, Q. (2025), "Analytical model of flat rolling force for corrugated composite sheet", Int. J. Mech. Sci., 297-298, p. 110327. https://doi.org/10.1016/j.ijmecsci.2025.110327
  58. Long, X., Dong, R., Li, J., Su, Y., Chang, C., Jia, F. and Wan, X. (2025), "Reverse analysis of film/substrate cohesion by indentation: A mesoscopic perspective", Int. J. Solids. Struct., 312, p. 113285. https://doi.org/10.1016/j.ijsolstr.2025.113285
  59. Luo, Y.X. and Dong, Y.L. (2024), "Strain measurement at up to 3000°C based on ultraviolet-digital image correlation", NDT & E Int., 146, p. 103155. https://doi.org/10.1016/j.ndteint.2024.103155
  60. Lv, H., Zeng, J., Zhu, Z., Dong, S. and Li, W. (2024a), "Study on prestress distribution and structural performance of heptagonal six-five-strut alternated cable dome with inner hole", Structures, 65, p. 106724. https://doi.org/10.1016/j.istruc.2024.106724
  61. Lv, S., Liu, H., Wang, F., Liu, X., Peng, M., Wei, Y. and Li, C. (2024b), "Effect of axial misalignment on the microstructure, mechanical, and corrosion properties of magnetically impelled arc butt welding joint", Mater. Today Commun., 40, p. 109866. https://doi.org/10.1016/j.mtcomm.2024.109866
  62. Ma, C., Yang, L., Li, M., He, J., Hua, C., Wang, L., Li, G., Liu, J., Yang, J., Liu, K. and Zhou, Y. (2025), "Closed-loop two-phase pulsating heat pipe towards heat export and thermal error control for spindle-bearing system of large-size vertical machining center", Appl. Therm. Eng., 269, p. 125993. https://doi.org/10.1016/j.applthermaleng.2025.125993
  63. Mantari, J.L. and Soares, C.G. (2013), "A novel higher-order shear deformation theory with stretching effect for functionally graded plates", Compos. Part B: Eng., 45(1), 268-281. https://doi.org/10.1016/j.compositesb.2012.05.036
  64. Meng, F., Chen, S., Zhang, W., Ou, P., Zhang, J., Chen, C. and Song, J. (2021), "Negative Poisson's ratio in graphene Miura origami", Mech. Mater., 155, p. 103774. https://doi.org/10.1016/j.mechmat.2021.103774
  65. Miskin, M.Z., Dorsey, K.J., Bircan, B., Han, Y., Muller, D.A., McEuen, P.L. and Cohen, I. (2018), "Graphene-based bimorphs for micron-sized, autonomous origami machines", Appl. Phys. Sci., 115(3), 466-470. https://doi.org/10.1073/pnas.1712889115
  66. Mohammadimehr, M., Rostami, R. and Arefi, M. (2016), "Electro-elastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-543. https://doi.org/10.12989/scs.2016.20.3.513
  67. Murari, B., Zhao, S., Zhang, Y., Ke, L. and Yang, J. (2023), "Vibrational characteristics of functionally graded graphene origami- enabled auxetic metamaterial beams with variable thickness in fluid", Eng. Struct., 277, p. 15440. https://doi.org/10.1016/j.engstruct.2022.115440
  68. Nguyen, N.V. and Phan, D.H. (2023), "Nonlinear free vibration of bi-directional functionally graded porous plates", Thin-Wall. Struct., 192, p. 111198. https://doi.org/10.1016/j.tws.2023.111198
  69. Ni, Z., Ma, J., Nazarov, A.A., Yuan, Z., Wang, X., Ao, S., Ji, H., Guo, P. and Qin, J. (2025a), "Improving the weldability and mechanical property of ultrasonic spot welding of Cu sheets through a surface gradient structure", J. Mater. Res. Tech., 36, 2652-2668. https://doi.org/10.1016/j.jmrt.2025.03.301 N
  70. Ni, Z.L., Ma, J.S., Liu, Y., Li, B.H., Nazarov, A.A., Li, H., Yuan, Z.P., Ling, Z.C. and Wang, X.X. (2025b), "Numerical analysis of ultrasonic spot welding of Cu/Cu joints", J. Mater. Eng. Perform., 1-12. https://doi.org/10.1007/s11665-025-10733-5
  71. Park, O.K., Tiwary, C.S., Yang, Y., Bhowmick, S., Vinod, S., Zhang, Q., Colvin, V.L., Asif, S.S., Vajtai, R., Penev, E.S. and Yakobson, B.I. (2017), "Magnetic field controlled graphene oxide-based origami with enhanced surface area and mechanical properties", Nanoscale, 9, 6991-6997. https://doi.org/10.1039/C7NR01054K
  72. Qin, X., Yang, W., Zhang, Z. and Wangari, V.W. (2025), "Simulation and design of T-shaped barrier tops including periodic split ring resonator arrays for increased noise reduction", Appl. Acoust. 236, p. 110751. https://doi.org/10.1016/j.apacoust.2025.110751
  73. Qu, Y., Jin, F. and Yang, J. (2021), "Stress-induced electric potential barriers in thickness-stretch deformations of a piezoelectric semiconductor plate", Acta. Mech., 232, 4533-4543. https://doi.org/10.1007/s00707-021-03059-5
  74. Rahaghi, M.I. and Barat, F. (2019), "Solving nonlinear optimal path tracking problem using a new closed loop direct–indirect optimization method: application on mechanical manipulators", Robotica, 37(1), 39-61. https://doi.org/10.1017/S0263574718000851
  75. Ren, G.J. (1989), "Analysis of simply supported laminated circular cylindrical shell roofs", Compos. Struct., 11, 277-292. https://doi.org/10.1016/0263-8223(89)90092-5
  76. Shang, W. Wang, C. Wu, Z. (2019), "Study of Hollow Nanoneedle's Mechanical Performance by Nanorobotic Manipulation System", In: 2019 IEEE 14th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Bangkok, Thailand, pp. 366-369. https://doi.org/10.1109/NEMS.2019.8915671
  77. Shen, H.S., Reddy, J.N. and Yu, Y. (2021), "Postbuckling of doubly curved FG-GRC laminated panels subjected to lateral pressure in thermal environments", Mech. Adv. Mater. Struct., 28(3), 260-270. https://doi.org/10.1080/15376494.2018.1556827
  78. Sheraz, M., Sun, X.F., Siddiqui, A., Wang, Y., Hu, S. and Sun, R. (2025), "Cellulose-based electrochemical sensors", Sensors, 25, p. 645. https://doi.org/10.3390/s25030645
  79. Su, Z., Liu, B., Zhang, Y., Song, J., Qian, B., Liu, W., Sun, S., Qiu, J. and Dai, Y. (2025), "Precision processing of Nb-Si alloy via water-jet guided laser: Realization of inhibited-oxidation and small-taper", Opt. Laser. Tech., 187, p. 112853. https://doi.org/10.1016/j.optlastec.2025.112853
  80. Sun, Y., Fan, W., Song, C., Gao, X., Liu, T., Song, W., Wang, S., Zhou, R., Li, G. and Li, S. (2022), "Effects of stitch yarns on interlaminar shear behavior of three-dimensional stitched carbon fiber epoxy composites at room temperature and high temperature", Adv. Compos. Hybr. Mater., 5(3), 1951-1965. https://doi.org/10.1007/s42114-022-00526-y
  81. Sun, M., Qiu, Z., Chen, Q., Lei, H., Hua, X., Zhang, Z., Song, Y., Jiang, S., Huang, D. and Fu, H. (2025), "Mechanical properties of a novel mechanical metamaterial with multi-stable and mono-stable characteristics", Thin-Wall. Struct., 212, p. 113230. https://doi.org/10.1016/j.tws.2025.113230
  82. Tang, C., Lu, Z., Qin, L., Yan, T., Li, J., Zhao, Y. and Qiu, Y. (2025), "Coupled vibratory roller and layered unsaturated subgrade model for intelligent compaction", Comput. Geotech., 177, p. 106827. https://doi.org/10.1016/j.compgeo.2024.106827
  83. Thai, H-T. and Choi, D-H. (2014), "Improved refined plate theory accounting for effect of thickness stretching in functionally graded plates", Compos. Part B: Eng., 56, 705-716. https://doi.org/10.1016/j.compositesb.2013.09.008
  84. Vali, H. and Arefi, M. (2023), "Extension of a novel higher order modeling to the vibration responses of sandwich graphene origami cylindrical panel", Archiv. Civil Mech. Eng., 23, p. 268. https://doi.org/10.1007/s43452-023-00797-2
  85. Wang, D., Ou-Yang, J., Guo, W., Yang, X. and Zhu, B. (2017), "Novel fabrication of PZT thick films by an oil-bath based hydrothermal method", Ceram. Int., 43(12), 9573-9576. https://doi.org/10.1016/j.ceramint.2017.04.119
  86. Wang, C., Yang, L., Hu, M., Wang, Y. and Zhao, Z. (2024), "On-demand airport slot management: tree-structured capacity profile and coadapted fire-break setting and slot allocation", Transp. A: Transp. Sci., 1-35. https://doi.org/10.1080/23249935.2024.2393224
  87. Wei, N., Chen, Y., Cai, K., Zhang, Y., Pei, Q., Zheng, J.C., Mai, Y.W. and Zhao, J. (2022), "Unusual thermal properties of graphene origami crease: A molecular dynamics study", Green Energy Env., 7(1), 86-94. https://doi.org/10.1016/j.gee.2020.07.026
  88. Xiang, D., He, D., Sun, H., Gao, P., Zhang, J. and Ling, J. (2025), "HCMPE-Net: An unsupervised network for underwater image restoration with multi-parameter estimation based on homology constraint", Opt. Laser. Tech., 186, p. 112616. https://doi.org/10.1016/j.optlastec.2025.112616
  89. Xiao, Y., Yang, Y., Ye, D. and Zhang, J. (2024a), "Quantitative precision second-order temporal transformation based pose control for spacecraft proximity operations", IEEE Trans. Aerosp. Electron. Syst., 61(2), 1931-1941. https://doi.org/10.1109/TAES.2024.3469167
  90. Xiao, Y., Yang, Y., Ye, D. and Zhao, Y. (2024b), "Scaling-transformation-based attitude tracking control for rigid spacecraft with prescribed time and prescribed bound", IEEE Trans. Aerosp. Electron. Syst., 61(1), 433-442. https://doi.org/10.1109/TAES.2024.3451454.
  91. Xu, J., Fan, L., Chen, C., Lu, G., Li, B. and Tu, T. (2024), "Study on fuel injection stability improvement in marine low-speed dual-fuel engines", Appl. Therm. Eng., 253, p. 123729. https://doi.org/10.1016/j.applthermaleng.2024.123729
  92. Yang, Z.Q., Hou, K.P., Cheng, Y. and Yang, B. (2014), "Study of column-hemispherical penetration grouting mechanism based on power-law fluid", Chin. J. Rock. Mech. Eng., 33(2), 3840-3846. https://doi.org/10.13722/j.cnki.jrme.2014.s2.057
  93. Yang, Z., Liu, Y., Chen, M., Wang, X., Ye, C., Li, X., Chen, W., Yang, Y., Wang, B., Li, C. and Wang, J. (2022a), "Influence of Coupling Effects between Gravel Soil Porosity and Cement Grout Weight on Diffusion Laws and Morphologies of Penetration Grouting", Appl. Sci., 12, p. 7601. https://doi.org/10.3390/app12157601
  94. Yang, Z., Zhang, D., Li, C., Zhang, Z., Zhu, Y., Yang, Y., He, N., Bai, X., Xi, W., He, D. and Ding, Y. (2022b), "Column penetration and diffusion mechanism of Bingham fluid considering displacement effect", Appl. Sci., 12, p. 5362. https://doi.org/10.3390/app12115362
  95. Yang, Z., Xiong, J., Zhao, X., Meng, X., Wang, S., Li, R., Wang, Y., Chen, M., He, N., Yang, Y. and Xu, H. (2023a), "Column-hemispherical penetration grouting mechanism for Newtonian fluid considering the tortuosity of porous media", Processes, 11, p. 1737. https://doi.org/10.3390/pr11061737
  96. Yang, N., Zou, Y. and Arefi, M. (2023b), "Bending results of graphene origami reinforced doubly curved shell", Def. Tech., 35, 198-210. https://doi.org/10.1016/j.dt.2023.11.017
  97. Ye, D., Wang, B., Wu, L., Del Rio-Chanona, E.A. and Sun, Z. (2024), "A decentralized pivoting path planning method for self-reconfigurable satellites", IEEE Trans. Indust. Electron., 71(11), 14318-14327. https://doi.org/10.1109/TIE.2024.3370976
  98. Yi, X., Zhao, R. and Lin, Y. (2024), "The impact of nighttime car body lighting on pedestrians' distraction: A virtual reality simulation based on bottom-up attention mechanism", Safety. Sci., 180, p. 106633. https://doi.org/10.1016/j.ssci.2024.106633
  99. Zenkour, A.M. and Arefi, M. (2016), "Nonlocal transient electrothermomechanical vibration and bending analysis of a functionally graded piezoelectric single-layered nanosheet rest on visco-Pasternak foundation", J. Thermal Stress., 40(2), 167-184. https://doi.org/10.1080/01495739.2016.1229146
  100. Zha, J. and Zhang, Z. (2024), "Reversible negative compressibility metamaterials inspired by Braess's Paradox", Smart Mater. Struct., 33(7), p. 075036. https://doi.org/10.1088/1361-665X/ad59e6
  101. Zhai, Y., Li, S. and Zhang, X. (2025), "Vibration performance of composite doubly-curved shells embedded with damping layer", Int. J. Struct. Stab. Dyn., p. 2650265. https://doi.org/10.1142/S0219455426502652
  102. Zhang, S., Yang, Y. and Yang, H. (2017), "A meshless symplectic algorithm for nonlinear wave equation using highly accurate RBFs quasi-interpolation", Appl. Math. Comput., 314(1), 110-120. https://doi.org/10.1016/j.amc.2017.07.010
  103. Zhang, T., Ou-Yang, J., Yang, X. and Zhu, B. (2018), "Transferred PMN-PT thick film on conductive silver epoxy", Materials, 11(9), p. 1621. https://doi.org/10.3390/ma11091621
  104. Zhang, M., Jiang, X. and Arefi, M. (2023a), "Dynamic formulation of a sandwich microshell considering modified couple stress and thickness-stretching", Eur. Phys. J. Plus., 138(3), p. 227. https://doi.org/10.1140/epjp/s13360-023-03753-4
  105. Zhang, S., Li, F., Fu, R., Li, H., Zou, S., Ma, N., Qu, S. and Li, J. (2023b), "A versatile continuum gripping robot with a concealable gripper", Cyborg Bionic Syst., 4, p. 0003. https://doi.org/10.34133/cbsystems.0003
  106. Zhang, T., Xu, S. and Zhang, W. (2024a), "New approach to feedback stabilization of linear discrete time-varying stochastic systems", IEEE Trans. Auto. Control., 70(3), 2004-2011. https://doi.org/10.1109/TAC.2024.3482119
  107. Zhang, H.H., Chao, J.B., Wang, Y.W., Liu, Y., Yao, H.M., Zhao, Z.P. and Niu, K. (2024b), "5G base station antenna array with heatsink radome", IEEE Trans. Anten. Propag., 72(3), 2270- 2278. https://doi.org/10.1109/TAP.2024.3358378
  108. Zhang, D., Li, B., Wei, Y., Zhang, H., Lu, G., Fan, L. and Xu, J. (2025a), "Investigation of injection and flow characteristics in an electronic injector featuring a novel control valve", Energy Convers. Manage., 327, p. 119609. https://doi.org/10.1016/j.enconman.2025.119609
  109. Zhang, Z., Lin, M., Li, D., Wu, R., Lin, R. and Yang, C. (2025b), "An AUV-enabled dockable platform for long-term dynamic and static monitoring of marine pastures", IEEE J. Ocean Eng., 50(1), 276-293. https://doi.org/10.1109/JOE.2024.3455411
  110. Zhao, S., Zhang, Y., Zhang, Y., Yang, J. and Kitipornchai, S. (2021), "Graphene origami-enabled auxetic metallic metamaterials: an atomistic insight", Int. J. Mech. Sci., 212, p. 106814. https://doi.org/10.1016/j.ijmecsci.2021.106814
  111. Zheng, D. and Cao, X. (2025), "Provably Efficient Service Function Chain Embedding and Protection in Edge Networks", IEEE Trans. Network., 33(1), 178-193. https://doi.org/10.1109/TNET.2024.3475248
  112. Zhu, B.P., Wu, D.W., Zhou, Q.F., Shi, J. and Shung, K.K. (2008), "Lead zirconate titanate thick film with enhanced electrical properties for high frequency transducer applications", Appl. Phys. Lett., 93, p. 012905. https://doi.org/10.1063/1.2956408
  113. Zhu, B.P., Zhou, Q.F., Shung, K.K., Wei, Q. and Huang, Y.H. (2009a), "Sol-gel derived PMN-PT thick film for high frequency ultrasound transducer applications", In: 2009 IEEE International Ultrasonics Symposium, Rome, Italy, September, pp. 2197-2200. https://doi.org/10.1109/ULTSYM.2009.5441779
  114. Zhu, B.P., Li, D.D., Zhou, Q.F., Shi, J. and Shung, K.K. (2009b), "Piezoelectric PZT thick films on LaNiO3 buffered stainless steel foils for flexible device applications", J. Phys. D: Appl. Phys., 42(2), p. 025504. https://doi.org/10.1088/0022-3727/42/2/025504
  115. Zhu, B.P., Zhou, Q.F., Shi, J., Shung, K.K., Irisawa, S. and Takeuchi, S. (2009c), "Self-separated hydrothermal lead zirconate titanate thick films for high frequency transducer applications", Appl. Phys. Lett., 94, p. 102901. https://doi.org/10.1063/1.3095504
  116. Zhu, B., Han, J., Shi, J., Shung, K.K., Wei, Q., Huang, Y., Kosec, M. and Zhou, Q. (2010), "Lift-off PMN-PT Thick Film for High Frequency Ultrasonic Biomicroscopy", J. Am. Ceram. Soc., 93(10), 2929-2931. https://doi.org/10.1111/j.1551-2916.2010.03873.x
  117. Zhu, B.P., Guo, W.K., Shen, G.Z., Zhou, Q. and Shung, K.K. (2011), "Structure and electrical properties of (111)-oriented Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3 thin film for ultra-high-frequency transducer applications", IEEE. Trans. Ultrason. Ferroelec. Freq. Control., 58(9), 1962-1967. https://doi.org/10.1109/TUFFC.2011.2038
  118. Zhu, B., Chan, N.Y., Dai, J., Shung, K.K., Takeuchi, S. and Zhou, Q. (2013a), "New fabrication of high-frequency (100-MHz) ultrasound PZT film kerfless linear array", IEEE Trans. Ultrason. Ferroelec. Freq. Control, 60(4), 854-857. https://doi.org/10.1109/TUFFC.2013.2635
  119. Zhu, B.P., Wu, D.W., Zhang, Y., Ou-Yang, J., Chen, S. and Yang, X.F. (2013b), "Sol-gel derived PMN-PT thick films for high frequency ultrasound linear array applications", Ceram. Int., 39(8), 8709-8714. https://doi.org/10.1016,j.ceramint.2013.04.054 https://doi.org/10.1016,j.ceramint.2013.04.054
  120. Zhu, B., Fei, C., Wang, C., Zhu, Y., Yang, X., Zheng, H., Zhou, Q. and Shung, K.K. (2017), "Self-focused AlScN film ultrasound transducer for individual cell manipulation", ACS Sensors, 2(1), 172-177. https://doi.org/10.1021/acssensors.6b00713