DOI QR코드

DOI QR Code

Experimental study on static and impact behaviors of polyurea coated reinforced concrete panel

  • Kwangsoo Youm (GS Construction & Engineering) ;
  • Sukwon Ji (Department of Architecture, Induk University) ;
  • Jiho Moon (Department of Civil Engineering, Kangwon National University)
  • 투고 : 2026.03.03
  • 심사 : 2026.07.21
  • 발행 : 2026.08.25

초록

Polyurea (PU) coating is a seamless membrane with excellent mechanical properties, widely used to mitigate blast loading damage. It also holds potential for enhancing the impact resistance of crash walls against automobile or train collisions, which involve comparatively lower strain rates than blast loads. This study focuses on investigating the static and impact behaviors of PU-coated reinforced concrete (RC) panels subjected to such loading conditions. A series of three-point bending tests and drop-weight tests were conducted, varying the PU coating thicknesses and drop heights. The static test results demonstrate that the PU coating effectively increases both the flexural strength and displacement capacity of the panels. Under drop-weight testing, the maximum deflection and residual deformation of the PU-coated RC panels were generally reduced compared to uncoated panels at identical impact energies. Consequently, the PU coating significantly improves the impact energy absorption performance of the structural members and effectively prevents concrete fragment scattering during impact events.

키워드

과제정보

This study was supported by the Ministry of Land, Infrastructure, and Transport of the Korean government through the Railway Technology Research Program (RS-2021-KA163289).

참고문헌

  1. Kontoni, D.P.N., Jahangiri, B., Dalvand, A., Shokri-Rad, M. (2023). Effect of length and content of steel fibers on the flexural and impact performance of self-compacting cementitious composite panels. Advances in Concrete Construction, 15(1), 23-39. https://doi.org/10.12989/acc.2023.15.1.023.
  2. Thakare, A.A., Siddique, S., Singh, A., Gupta, T., Chaudhary, S. (2022). Effect of rubber fiber size fraction on static and impact behavior of self-compacting concrete. Advances in Concrete Construction, 13(6), 433-450. https://doi.org/10.12989/acc.2022.13.6.433.
  3. Choi, J.I, Park, S.E., Lee, S.K, Kim, G.Y., Hwang, J.S., Lee, B.Y. (2021). Impact resistant properties of Kagome truss reinforced composite panels. Advances in Concrete Construction, 12(5), 391-398. https://doi.org/10.12989/acc.2021.12.5.391.
  4. Iqbal, N., Sharma, P.K., Kumar, D., Roy, P.K. (2018). Protective polyurea coatings for enhanced blast survivability of concrete. Construction and Building Materials, 175, 682-690. https://doi.org/10.1016/j.conbuildmat.2018.04.204.
  5. Guo, S., Liu, F., Chen, J., Yang, J. (2024). Dynamic response and blast resistance mechanism of polyurea coating on RC slab during contact explosions. Construction and Building Materials, 411, 134271. https://doi.org/10.1016/j.conbuildmat.2023.134271.
  6. Wang, W., Huo, Q., Yang, J.C., Wang, J.H., Wang, X., Gao, W.L. (2022). Damage analysis of POZD coated square reinforced concrete slab under contact blast. Defence Technology, 18(9), 1715-1726. https://doi.org/10.1016/j.dt.2021.07.005.
  7. Mu, M., Liu, F., Li, J., He, F., Liu, S., Li, C., Yang, Y. (2024). Influence of modified polyurea coating thickness on the blast resistance of RC slab. Structures, 67, 107009. https://doi.org/10.1016/j.istruc.2024.107009.
  8. Song, D., Tan, Q., Cao, Y.Y.Y., Hu, Y. (2023). Experimental investigation on blast and post-blast performance of reinforced concrete straight-wall arches strengthened with polyurea coating. Construction and Building Materials, 385, 131352. https://doi.org/10.1016/j.conbuildmat.2023.131352.
  9. Liu, Z., Zhao, X., Fang, H., Wang, G., Shi, M. (2023). Investigation on the damage features and dynamic response of reinforced concrete slabs with polyurethane sacrificial cladding under close-range explosions. Construction and Building Materials, 395, 132149. https://doi.org/10.1016/j.conbuildmat.2023.132149.
  10. Davidson, J.S., Porter, J.R., Dinan, R.J., Hammons, M.I., Connell, J.D. (2004). Explosive testing of polymer retrofit masonry walls. Journal of Performance of Constructed Facilities, 18(2), 100-106. https://doi.org/10.1061/(ASCE)0887-3828(2004)18:2(100).
  11. Hrynyk, T.D., Myers, J.J. (2008). Out-of-plane behavior of URM arching walls with modern blast retrofits: experimental results and analytical model. Journal of Structural Engineering, 134(10), 1589-1597. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:10(1589).
  12. Cuong, N.H., Shin, J., Kim, J.H., Luat, N.V., Lee, K. (2022). Compressive and shear behavior of brick masonry assemblages strengthened with polyurea coating: experiment and DEM investigations. Construction and Building Materials, 348, 128534. https://doi.org/10.1016/j.conbuildmat.2022.128534.
  13. Cuong, N.H., Luat, N.V., Lee, G., An, H., Han, S.W., Lee, K. (2023). Experimental and DEM numerical analyses of the flexural and diagonal compression behavior of masonry reinforced with polyurea coating. Structures, 54, 1578-1592. https://doi.org/10.1016/j.istruc.2023.05.051.
  14. Zhu, H., Luo, X., Ji, C., Wang, X., Wang, Y., Zhao, C., Zhang, L. (2023). Strengthening of clay brick masonry wall with spraying polyurea for repeated blast resistance. Structures, 53, 1069-1091. https://doi.org/10.1016/j.istruc.2023.05.004.
  15. Wang, A., Xu, G., Liu, X. (2024). Effect of polyurea coating on low-velocity impact properties of unidirectional carbon fiber-reinforced polymer composites plates. Structures, 61, 106090. https://doi.org/10.1016/j.istruc.2024.106090.
  16. Szafran, J., Matusiak, A. (2020). Crushing strength of concrete rings with a polyurea reinforce system. Tunnelling and Underground Space Technology, 101, 103407. https://doi.org/10.1016/j.tust.2020.103407.
  17. Greene, C.E., Myers, J.J. (2013). Flexural and shear behavior of reinforced concrete members strengthened with a discrete fiber-reinforced polyurea system. Journal of Composites for Construction, 17(1), 1170-1179. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000308.
  18. Marwan, A.E., Debaiky, A.S., Khalil, N.N. (2015). Shear and flexural behavior of RC beams strengthened with polyurea spray. International Journal of Advance Research in Science and Engineering, 4(11), 12-26.
  19. Parniani, S., Toutanji, H. (2015). Monotonic and fatigue performance of RC beams strengthened with a polyurea coating system. Construction and Building Materials, 101, 22-29. https://doi.org/10.1016/j.conbuildmat.2015.10.020.
  20. Rizwan, M., Khaleequzzaman, S., Zaman, U.K., Fida, S.A., Shahzad, A., Rehman, M., Sulaiman, M.O. (2021). Tensile strength improvement of concrete slabs using polyurea spray. Practice Periodical on Structural Design and Construction, 26(1), 04020048. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000530.
  21. Pramanik, B., Tadepalli, T., Mantena, P.R. (2012). Surface fractal analysis for estimating the fracture energy absorption of nanoparticle reinforced composites. Materials, 5(5), 922-936. https://doi.org/10.3390/ma5050922.
  22. Li, F., Chen, G., Xu, G., Wu, Y. (2020). An experimental study on the compressive dynamic performance of polypropylene fiber reinforced concrete for retaining structure under automobile collision magnitude. Advances in Civil Engineering, 2020, 8826006. https://doi.org/10.1155/2020/8826006.
  23. Guo, H., Du, C., Chen, Y., Li, D., Hu, W., Lv, X. (2022). Study on protective performance of impactresistant polyurea and its coated concrete under impact loading. Construction and Building Materials, 340, 127749. https://doi.org/10.1016/j.conbuildmat.2022.127749.
  24. Miao, Y., Zhang, H., He, H., Deng, Q. (2019). Mechanical behaviors and equivalent configuration of a polyurea under wide strain rate range. Composite Structures, 222, 110923. https://doi.org/10.1016/j.compstruct.2019.110923.
  25. Somarathna, H.M.C.C., Raman, S.N., Mohotti, D., Mutalib, A.A., Badri, K.H. (2020). Rate dependent tensile behavior of polyurethane under varying strain rates. Construction and Building Materials, 254, 119203. https://doi.org/10.1016/j.conbuildmat.2020.119203.
  26. Bentz, E.C. (2000). Sectional analysis of reinforced concrete members. Ph.D. dissertation, University of Toronto, Toronto, ON, Canada.
  27. Ko, S.H., Lee, J.H. (2021). Monotonic tension and compression stress-strain model for longitudinal reinforcement. Journal of the Korea Concrete Institute, 33(6), 551-559. (in Korean) https://doi.org/10.4334/JKCI.2021.33.6.551.
  28. Youm, K., Moon, J. (2023). Experimental study on impact behavior of concrete panel with and without polypropylene macrofibers. Buildings, 13(2), 303. https://doi.org/10.3390/buildings13020303.
  29. SAE International (1995). SAE J211-1; instrumentation for impact test, Part 1. electronic instrumentation, Warrendale, PA, USA.
  30. International Organization for Standardization (ISO) (2000). ISO 6487; road vehicles: measurement techniques in impact tests: instrumentation. Geneva, Switzerland.