DOI QR코드

DOI QR Code

AUTODYN-Based Structural Response Analysis for Protective Performance Assessment of Missile Component Test Facility

AUTODYN을 이용한 유도탄 구성품 성능시험장의 방호성능 평가

  • Gyeongseop Hwang (Defense Firing Test Center, Defense Agency for Technology and Quality)
  • 황경섭 (국방기술품질원 국방종합시험센터)
  • Received : 2026.01.14
  • Accepted : 2026.06.18
  • Published : 2026.08.05

Abstract

This study evaluated the protective performance of a missile component test facility against accidental explosions during combustion and storage. Using AUTODYN-based blast protection simulations, structural displacements and overpressure ingress were analyzed to verify the facility's protective performance. In Case 1, Building 1 (B1) experienced slab collapse and partial elastoplastic deformation of walls, limiting structural reusability. The protective barrier between B1 and Building 3 (B3) effectively functioned as a sacrificial element, demonstrating sufficient blast mitigation capability. For overpressure ingress into B3, certain locations exceeded both the 50 % eardrum rupture threshold and the critical eardrum rupture threshold; however, no pulmonary damage was predicted. In Case 2, Building 2 (B2) experienced plastic deformation of slabs, columns, and walls, resulting in structural collapse and precluding reuse. Overpressure entering B3 exceeded the 50 % eardrum rupture threshold at the opening and interior zones. At the lower opening, overpressure exceeded the critical pressure for pulmonary hemorrhage; however, it remained within the 99 % survival probability curve. B3 demonstrated no critical structural failure or back-face spalling; however, internal overpressure ingress emerged as the primary protective concern.

Keywords

References

  1. P. J. Martin, "Failure Analysis of Solid Rocket Apogee Motors," NASA-CR-128354, 1972.
  2. D. Qiao, X. Kong, S. Meng and S. Feng, "Advances in the Analysis of Storage Failure of Solid Rocket Motor," Journal of Physics: Conference Series, Vol. 2542, No. 012014, 2023.
  3. Ministry of National Defense, "Defense Acquisition Program Act," Republic of Korea, 2026.
  4. Ministry of National Defense, "Defense Ammunition and Explosives Safety Management Instruction," Republic of Korea, 2023.
  5. Department of Defense Explosives Safety Board, "The Defense Explosives Safety Regulation 6055.09," Edition 1, Change 1, 2024.
  6. Ministry of National Defense, "Instruction on Ammunition and Explosives Safety Standards," Republic of Korea, 2022.
  7. I. B. Jeon, G. S. Hwang, S. Y. Park and C. H. Lee, "A Review of Domestic and Foreign Safety Standards for Military Explosive Testing Facilities and Effective Application Measures," Journal of the Korea Academia-Industrial cooperation Society, Vol. 23, No. 12, pp. 515-524, 2022. https://doi.org/10.5762/KAIS.2022.23.12.515
  8. G. S. Hwang, S. H. Jo and D. H. Kim, "Risk Assessment Using Overpressure and Impulse for Abnormal Explosion of Composite Solid Propellants," Fire Science and Engineering, Vol. 38, No. 1, pp. 92-100, 2024. https://doi.org/10.7731/KIFSE.676b9b7c
  9. D. H. Kim, G. S. Hwang and S. H. Cho, "Performance Evaluation Through Numerical Analysis of Ground Firing Test Site Protective Structure," Journal of the Korean Society of Propulsion Engineers, Vol. 28, No. 2, pp. 60-68, 2024. https://doi.org/10.6108/KSPE.2024.28.2.060
  10. G. S. Hwang, "Safety Distance Calculation and Analysis for Solid Rocket Motor Static Firing  Test," Journal of the Korean Society of Propulsion Engineers, Vol. 29, No. 4, pp. 47-54, 2025. https://doi.org/10.6108/KSPE.2025.29.4.047
  11. Health and Safety Executive, "Explosives Regulations 2014: Safety Provisions," HSE Books, UK, p. 11, 2014.
  12. A. Razionale, M. Navarra, G. D. Bartolomeo and R. Bubbico, "Safety Assessment of Solid Propellants for Satellites Engines," Chemical Engineering Transactions, Vol. 26, pp. 45-50, 2012.
  13. P. B. Butler and H. Krier, "Analysis of Deflagration to Detonation Transition in High-Energy Solid Propellants," Combustion and Flame, Vol. 63, pp. 31-48, 1986. https://doi.org/10.1016/0010-2180(86)90109-4
  14. Ministry of National Defense, "Protection Simulation Operational Guidelines," Republic of Korea, 2015.
  15. U. S. Department of Defense, "Structures to Resist the Effects of Accidental Explosions," UFC 3-340-02, 2008.
  16. Ministry of National Defense, "Design Standards for Blast and Ballistic Protection Facilities," DMFC 2-20-10, Republic of Korea, 2022.
  17. National Police Agency, "Enforcement Decree of the Act on the Safety Management of Guns, Swords, and Explosives," Republic of Korea, 2021.
  18. Joint Technical Bulletin, U. S. Departments of the Army, the Navy and the Air Force, "Department of Defense Ammunition and Explosives Hazard Classification Procedure," TB 700-2, NAVSEAINST 8020.8C, TO 11A-1-47, Washington DC, USA, 2015.
  19. N. He, C. Xiang, B. Qin and Q. Zhang, "Calculation of TNT Equivalence of Composite Propellant and Visualized Software Development," High Performance Computing and Applications, Vol. 5938, pp. 161-168, 2010. https://doi.org/10.1007/978-3-642-11842-5