DOI QR코드

DOI QR Code

Numerical Simulation of Soak and Cool-down Performance for Combat Vehicle using 1D Multi-volume System

1D 다중 체적계 모델을 활용한 전투차량 소킹-냉방 성능 분석

  • Hyeon Don Park (Modeling & Simulation Team, Land Systems Business Group, Hanwha Aerospace) ;
  • Yujin Jang (Modeling & Simulation Team, Land Systems Business Group, Hanwha Aerospace) ;
  • Keunhyong Kim (Modeling & Simulation Team, Land Systems Business Group, Hanwha Aerospace) ;
  • Namhun Lee (Modeling & Simulation Team, Land Systems Business Group, Hanwha Aerospace) ;
  • Jaeyi Oh (Modeling & Simulation Team, Land Systems Business Group, Hanwha Aerospace)
  • 박현돈 ( 한화에어로스페이스(주) LS사업부 M&S팀) ;
  • 장유진 ( 한화에어로스페이스(주) LS사업부 M&S팀) ;
  • 김근형 ( 한화에어로스페이스(주) LS사업부 M&S팀) ;
  • 이남훈 ( 한화에어로스페이스(주) LS사업부 M&S팀) ;
  • 오재이 ( 한화에어로스페이스(주) LS사업부 M&S팀)
  • Received : 2025.10.13
  • Accepted : 2026.06.19
  • Published : 2026.08.05

Abstract

Solar radiation, which significantly impacts on the performance of vehicle thermal comfort, was modeled using a 1D model. To evaluate the accuracy of the solar load model, the thermal behavior on the chamber surface was analyzed and compared with MuSES and experimental results. The soak and cool-down performance of a combat vehicle was also evaluated with the solar effects. A 1D multi-volume system was applied to efficiently determine the thermal performance in each volume, and the accuracy of the 1D model was rigorously assessed against 3D CFD results. The root-mean-square(RMS) error during soaking and cooling in each volume showed good agreement with the reference data, and the converged volumetric temperature of the 1D model was also obtained with high accuracy.

Keywords

References

  1. B. Dibek and Ö. Ağra, "Modelling of Human Thermal Comfort in Armored Military Vehicles: An Experimental Study of Removing Heat with Spot Cooling," Thermal Science and Engineering Progress, Vol. 49, 102493, 2024.
  2. S. Aceros, D. Currό, G. D. Pierro, G. Fontaras and P. Olmeda, "A Methodology for Indoor Testing of Solar Radiation Impact on Vehicle Cabin Temperature," Energy Conversion and Management: X, Vol. 20, 100474, 2023. https://doi.org/10.1016/j.ecmx.2023.100474
  3. S. G. Hodder and K. Parsons, "The Effects of Solar Radiation on Thermal Comfort," International Journal of Biometeorology, Vol. 51, No. 3, pp. 233-250, 2007. https://doi.org/10.1007/s00484-006-0050-y
  4. P. Alok, S. C. T. Javvadi, P. K. Konchada and G. R. Dheep, "Numerical Simulation of a Single-Pass Parallel Flow Solar Air Heater with Circular Fins using S2S Radiation Model," Proceedings of International Conference on Thermofluids, pp. 101-111, 2020.
  5. S. El-Sebaey, M. Ellman, A. Hegazy and T. Ghonim, "Experimental Analysis and CFD Modeling for Conventional Basin-Type Solar Still," Energies, Vol. 13, No. 21, 2020. https://doi.org/10.3390/en13215734
  6. A. Vedauarz, "HVAC: handbook of heating, ventilation and air conditioning for design and implementation," 2007.
  7. A. Mostafaeipour, H. Goudarzi, A. Sedaghat, M. Jahangiri, H. Hadian, M. Rezaei, A. M. Golmohammadi and P. Karimi, "Energy Efficiency for Cooling Buildings in Hot and Dry Regions using Sol-air Temperature and Ground Temperature Effects," Journal of Engineering, Design and Technology, Vol. 17, No. 3, pp. 613-628, 2019. https://doi.org/10.1108/JEDT-12-2018-0216
  8. A. Patil, M. Radle, B. Shome and S. Ramachandran, "One-Dimensional Solar Heat Load Simulation Model for a Parked Car," No. 2015-01-0356, SAE Technical Paper, 2015.
  9. K. Subramanian, P. Danapalan, S. Sambandan and M. Govindarajalu, "A Study on the Effect of Different Glasses and Its Properties on Vehicle Cabin during Soaking at Hot Ambient Conditions using 1D Simulation," No. 2020-01-0956, SAE Technical Paper, 2020.
  10. G. Sevilgen, H. Bayram and M. Kilic, "The 1-D Analysis of Cool Down Simulation of Vehicle HVAC System," Thermal Science, Vol. 25, No. 3 Part A, pp. 1677-1687, 2021. https://doi.org/10.2298/TSCI191016099S
  11. S. Shah, "Integration of 1D and 3D CFD Software for Cabin Cool Down Simulation," No. 2018-01-0773, SAE Technical Paper, 2018.
  12. S. Natarajan, R. Amaral and S. Rahman, "1D Modeling of AC Refrigerant Loop and Vehicle Cabin to Simulate Soak and Cool Down," SAE Technical Paper, No. 2013-01-1502, 2013.
  13. A. Malaplate, P. Grossmann and F. Schwenger, "CUBI: a Test Body for Thermal Object Model Validation," In: Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XVIII. SPIE, Vol. 6543, pp. 49-63, 2007.
  14. F. D. Lapierre, M. Acheroy, Y. Bushlin, A. D. Lessin and A. Reinov, "Validation of RadThermIR and OSMOSIS Thermal Software on the Basis of the Benchmark Object CUBI," 5th International IR Target, Background Modelling & Simulation(ITBMS) Workshop, 2009.
  15. E. Bideaux and S. Scavarda, "A Pneumatic Library for AMESim," Proceedings of the ASME 1998 International Mechanical Engineering Congress and Exposition, Fluid Power Systems and Technology, Vol. 15939, pp. 185-195, 1998.
  16. K. Johnson, A. Curran, D. Less, D. Levanen, E. Marttila, T. Gonda and J. Jones, "MuSES: A New Heat and Signature Management Design Tool for Virtual Prototyping," Proceedings of the 9th Annual Ground Target Modelling & Validation Conference, 1998.
  17. J. E. Matsson, "An Introduction to ANSYS Fluent 2022," Sdc Publications, 2022.
  18. F. Schwenger, P. Grossmann and A. Malaplate, "Validation of the Thermal Code of RadTherm-IR, IR-Workbench, and F-TOM," In Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XX, Vol. 7300, pp. 178-187, 2009.