DOI QR코드

DOI QR Code

Experimental evaluation of control hardware for an isolated structure by LSCMD with LEM control algorithm

  • Qi-Yang Liao (Facility Technology Center, China Engineering Consultants, Inc.) ;
  • Chan-Jung Kang (Department of Civil Engineering, I-Shou University) ;
  • Shih-Yu Chu (Department of Civil Engineering, National Cheng Kung University) ;
  • Ding-Jie Lin (HD Engineering Consultants Co., Ltd.) ;
  • Chih-Te Chien (Yunlin-Chiayi-Tainan Region Branch Office, Highway Bureau, MOTC) ;
  • Chih-Hua Peng (Great Work Design Consultant Ltd.)
  • Received : 2025.10.10
  • Accepted : 2026.06.25
  • Published : 2026.08.25

Abstract

This study investigates an isolated structure equipped with a Leverage-type Stiffness-Controllable Mass Damper (LSCMD) system using the Least Energy Method (LEM) control algorithm. Although the isolation structure can effectively reduce structural acceleration, it may lead to excessive isolation displacement when encountering a long-period near-fault earthquake. The objective of the LSCMD system in this study is to mitigate isolation displacement. Two control hardware configurations are examined: a Programmable Logic Controller (PLC)-based control platform and a motion card-based control platform. The PLC-based control platform is limited by its pre-programmed settings, which cannot be manually adjusted to the servo motor parameters. In contrast, the motion card-based control platform allows modification of the motor rotation speed and the PID gains via National Instruments Measurement & Automation Explorer (NI-MAE), which effectively enhances the control performance of LSCMD. This study implements the Shaking Table Tests (STT) and shows that the motion card-based control platform achieves smaller damper strokes. In addition, the pivot displacement is compared to validate the control performance of LEM. The results confirm that the motion card control-based platform provides a stable and accurate experimental framework applicable to other control algorithms and devices.

Keywords

Acknowledgement

This research was supported in part by the National Science and Technology Council of the Republic of China (Taiwan) under grants MOST-103-2625-M-006-007, MOST-104-2625-M-006-002, and NSTC-112-2923-E-260-001-MY4. The authors are also grateful to the National Kaohsiung University of Science and Technology (NKUST) for their technical support on the shaking table tests. This support is greatly appreciated.

References

  1. Li, C., Yang, P., Peng, Y. (2025). Development and experimental study of a two-stage self-centering friction damper. Structures, 80, 109821. https://doi.org/10.1016/j.istruc.2025.109821.
  2. Chong, W.K., Wong, J.Y., Yip, C.C., Ling, L., Amran, M. (2025). Evaluating viscous damping for seismic energy dissipation in downscaled concrete structures under consistent earthquake loadings. Structures, 78, 109313. https://doi.org/10.1016/j.istruc.2025.109313.
  3. Azizi, A., Barghian, M. (2025). Comparison of the performance of frictional pendulum isolators and suspended pendulum isolators. Earthquakes and Structures, 28(4), 347-356. https://doi.org/10.12989/eas.2025.28.4.347.
  4. Suk, R. (2025). Technological friction dampers system (TFDS) - Novel base isolation system (TBIS) and hybrid system for steel structures. Earthquakes and Structures, 28(4), 311-326. https://doi.org/10.12989/eas.2025.28.4.311.
  5. Jangid, R.S. (2023). Seismic performance of a clutched inerter for structures with curved surface sliders. Structures, 49, 44-57. https://doi.org/10.1016/j.istruc.2023.01.057.
  6. Jangid, R.S. (2025). Resilient base-isolated structures using bio-inspired supplementary devices. Structures, 71, 108099. https://doi.org/10.1016/j.istruc.2024.108099.
  7. Frahm, H. (1909). Device for damping vibration of bodies. US Patent No. 989958, The United States Patent and Trademark Office, Washington, D.C., USA.
  8. Lin, C.C., Chen, C.L., Wang, J.F. (2010). Vibration control of structures with initially accelerated passive tuned mass dampers under near-fault earthquake excitation. Computer-Aided Civil and Infrastructure Engineering, 25(1), 69-75. https://doi.org/10.1111/j.1467-8667.2009.00607.x.
  9. Kang, C.J., Liao, Q.Y., Wang, J.F., Chu, S.Y., Fang, C., Lin, C.C. (2025). Performance verification of a full-scale tuned mass damper in high-rise building against wind forces through real-time hybrid testing with shaking table. Journal of Building Engineering, in review.
  10. Den Hartog, J.P. (1956), Mechanical vibrations (4th Edition), McGraw-Hill, New York, NY, USA.
  11. Obata, M., Shimazaki, Y. (2008). Optimum parametric studies on tuned rotary-mass damper. Journal of Vibration and Control, 14(6), 867-884. https://doi.org/10.1177/1077546307084443.
  12. Rieß, S., Kaal, W., Herath, K. (2021). Frequency-adaptable tuned mass damper using metal cushions. Vibration, 4(1), 77-90. https://doi.org/10.3390/vibration4010007.
  13. Poplawski, B., Mikułowski, G., Mróz, A., Jankowski, Ł. (2018). Decentralized semi-active damping of free structural vibrations by means of structural nodes with an on/off ability to transmit moments. Mechanical Systems and Signal Processing, 100, 926-939. https://doi.org/10.1016/j.ymssp.2017.08.012.
  14. Bajkowski, J.M., Dyniewicz, B., Bajer, C.I. (2016). Semi-active damping strategy for beams system with pneumatically controlled granular structure. Mechanical Systems and Signal Processing, 70, 387-396. https://doi.org/10.1016/j.ymssp.2015.09.026.
  15. La, V.D., Nguyen, N.T. (2024). Truly optimal semi-active damping to control free vibration of a single degree of freedom system. Theoretical and Applied Mechanics Letters, 14(7), 100505. https://doi.org/10.1016/j.taml.2024.100505.
  16. Lu, L.Y., Lin, T.K., Yeh, S.W. (2010). Experiment and analysis of a leverage-type stiffness-controllable isolation system for seismic engineering. Earthquake Engineering and Structural Dynamics, 39, 1711-1736. https://doi.org/10.1002/eqe.1005.
  17. Chu, S.Y., Yeh, S.W., Lu, L.Y., Peng, C.H. (2017). A leverage-type stiffness controllable mass damper for vibration mitigation of structures. Structural Control and Health Monitoring, 24, e1896. https://doi.org/10.1002/stc.1896.
  18. Chu, S.Y., Yeh, S.W., Lu, L.Y., Peng, C.H. (2017). Experimental verification of leverage-type stiffness-controllable tuned mass damper using direct output feedback LQR control with time-delay compensation. Earthquakes and Structures, 12(4), 425-436. https://doi.org/10.12989/eas.2017.12.4.425.
  19. Qiao, S., Zhou, Y., Wang, L., Li, H., Jiang, D. (2025). Hilbert-Huang transform-based phase control algorithm for semi-active tuned mass damper with variable damping. Journal of Building Engineering, 108, 112985. https://doi.org/10.1016/j.jobe.2025.112985.
  20. Zhang, H., Wang, L., Shi, W. (2025). Semi-active variable stiffness and damping control for adjacent structures using LSTM-based prediction algorithm. Journal of Building Engineering, 103, 112127. https://doi.org/10.1016/j.jobe.2025.112127.
  21. Cao, L., Pan, H., Li, X., Li, C. (2025). Predicting optimal primary tuning parameters of PTTMDI for vortex-induced vibration control of super-tall buildings using physics information enhanced DNN. Engineering Structures, 334, 120268. https://doi.org/10.1016/j.engstruct.2025.120268.
  22. Liao, Q.Y., Kang, C.J., Chu, S.Y., Chien, C.T., Peng, C.H. (2026). Comparative performance evaluation of the least energy method and LQR control for LSCMD system. Journal of Building Engineering, 120, 115544. https://doi.org/10.1016/j.jobe.2026.115544.
  23. Wu, Z., Ikago, K. (2024). Feasibility of an inerter-based causal rate-independent damping model for the protection of seismically isolated structures. Structures, 62, 106271. https://doi.org/10.1016/j.istruc.2024.106271.
  24. Lai, Z., Luo, B., Shuang, C., Cao, W., Tan, P., Shu, W., Zhu, Z. (2025). Seismic performance of isolation structure with double-sided sliding horizontal-vertical decoupling bearing. Structures, 79, 105979. https://doi.org/10.1016/j.istruc.2025.109579.
  25. Cao, L., Li, C. (2021). A high performance hybrid passive base-isolated system. Structural Control and Health Monitoring, 29(3), e2887. https://doi.org/10.1002/stc.2887.
  26. Li, X., Wang, Z., Pan, H., Cao, L., Li, C. (2025). Hybrid system of base-isolated structures with tuned tandem mass damper-inerters considering internal friction. Journal of Building Engineering, 101, 111853. https://doi.org/10.1016/j.jobe.2025.111853.
  27. Aknouche, H., Bechtoula, H., Airouche, A., Benouar, D. (2014). Investigation on the performance of the six DOF C.G.S., Algeria, shaking table. Earthquakes and Structures, 6(5), 539-560. https://doi.org/10.12989/eas.2014.6.5.539.
  28. Chen, P.C., Kek, M.K., Hu, Y.W., Lai, C.T. (2018). Statistical reference values for control performance assessment of seismic shake table testing. Earthquakes and Structures, 15(6), 595-603. https://doi.org/10.12989/eas.2018.15.6.595.
  29. Liao, Q.Y., Kang, C.J., Chu, S.Y., Lai, Y.H., Chang, C.W., Tang, Y. (2026). Digital real-time hybrid testing of PSIVC floor isolation system by multi-axial seismic test system. Smart Structures and Systems, 37(1), 17-48. https://doi.org/10.12989/sss.2026.37.1.017.
  30. Fan, P., Li, S., Mao, L. (2023). Seismic control performance and experimental study of multiple pounding tuned rolling mass damper. Earthquakes and Structures, 24(4), 247-258. https://doi.org/10.12989/eas.2023.24.4.247.
  31. Lee, S.M., Jeon, B.G., Jung, W.Y. (2024). Seismic performance assessment and reliability verification of molded transformers based on shaking table tests. Earthquakes and Structures, 27(5), 431-444. https://doi.org/10.12989/eas.2024.27.5.431.
  32. Chaudhuri, P., Maity, D., Maiti, D.K. (2025). Experimental study of horizontal MR damper for sinusoidally loaded framed structure. Earthquakes and Structures, 28(3), 221-235. https://doi.org/10.12989/eas.2025.28.3.221.
  33. Lashin, M.M. (2014). Different applications of programmable logic controller (PLC). International Journal of Computer Science, Engineering and Information Technology, 4(1), 27-34. https://doi.org/10.5121/ijcseit.2014.4103.
  34. Ioannides, M.G. (2004). Design and implementation of PLC-based monitoring control system for induction motor. IEEE Transactions on Energy Conversion, 19(3), 469-476. https://doi.org/10.1109/TEC.2003.822303.
  35. Bayindir, R., Cetinceviz, Y. (2011). A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants—An experimental setup. ISA Transactions, 50(2), 321-328. https://doi.org/10.1016/j.isatra.2010.10.006.
  36. Zorlu, S., Senol, I., Bakan, A.F. (2006). Vector control of an AC brushless servomotor using a custom-designed motion control card. IEEE International Symposium on Industrial Electronics, 3, 2516-2521. https://doi.org/10.1109/ISIE.2006.295968.
  37. Dülger, L.C., Kireçci, A. (2007). Motion control and implementation for an AC servomotor system. Modelling and Simulation in Engineering, 2007(1), 050586. https://doi.org/10.1155/2007/50586.