DOI QR코드

DOI QR Code

Image-Based Analysis of Bubble Count and Size Evolution on Plasma-Etched PTFE Surfaces under Flow Conditions

유동 조건에서 플라즈마 에칭 PTFE 표면에 형성된기포의 개수 및 크기 변화에 대한 영상 기반 분석

  • Sumi You (Department of Nanoscale Semiconductor Engineering, Hannam University) ;
  • Kiwoong Kim (Department of Mechanical Engineering, Hannam University)
  • Received : 2026.07.22
  • Accepted : 2026.08.07
  • Published : 2026.08.31

Abstract

This study investigated the temporal evolution of surface bubbles on pristine and plasma-etched PTFE under recirculating water-channel flow. Plasma etching increased the water contact angle from 116±1° to 170±1° and reduced the sliding angle to approximately 1°. Top-view images were acquired for 1 h at 20 s intervals and processed to determine the bubble count and mean equivalent diameter. On the plasma-etched surface, the bubble count increased initially and then remained within a narrow range, while the mean equivalent diameter stayed near 0.47 mm. In contrast, the pristine surface showed a progressive decrease in bubble count accompanied by an increase in mean equivalent diameter. The count-diameter plot showed a compact upper-right cluster for the plasma-etched surface and a broad negative trend for the pristine surface. These results indicate that, under the present flow condition, plasma etching favors the retention of a bubble population characterized by a relatively high count and large mean equivalent diameter.

Keywords

Acknowledgement

이 논문은 2026년도 정부(산업통상부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임 (RS-2024-00409639, 2026년 산업혁신인재성장지원사업).

References

  1. Wenzel, R. N., 1936, "Resistance of Solid Surfaces to Wetting by Water," Industrial & Engineering Chemistry, Vol. 28(8), pp. 988-994. https://doi.org/10.1021/ie50320a024
  2. Cassie, A. B. D. and Baxter, S., 1944, "Wettability of Porous Surfaces," Transactions of the Faraday Society, Vol. 40, pp. 546-551. https://doi.org/10.1039/tf9444000546
  3. Hubert, J., Dufour, T., Vandencasteele, N., Desbief, S., Lazzaroni, R. and Reniers, F., 2012, "Etching Processes of Polytetrafluoroethylene Surfaces Exposed to He and He-O₂ Atmospheric Post-discharges," Langmuir, Vol. 28(25), pp. 9466-9474. https://doi.org/10.1021/la300822j
  4. Dufour, T., Hubert, J., Viville, P., Duluard, C. Y., Desbief, S., Lazzaroni, R. and Reniers, F., 2012, "PTFE Surface Etching in the Post-discharge of a Scanning RF Plasma Torch: Evidence of Ejected Fluorinated Species," Plasma Processes and Polymers, Vol. 9(8), pp. 820-829. https://doi.org/10.1002/ppap.v9.8
  5. Carbone, E. A. D., Verhoeven, M. W. G. M., Keuning, W. and van der Mullen, J. J. A. M., 2016, "PTFE Treatment by Remote Atmospheric Ar/O₂ Plasmas: A Simple Reaction Scheme Model Proposal," Journal of Physics: Conference Series, Vol. 715(1), 012011. https://doi.org/10.1088/1742-6596/715/1/012011
  6. Barthlott, W., Schimmel, T., Wiersch, S., Koch, K., Brede, M., Barczewski, M., Walheim, S., Weis, A., Kaltenmaier, A., Leder, A. and Bohn, H. F., 2010, "The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water," Advanced Materials, Vol. 22(21), pp. 2325-2328. https://doi.org/10.1002/adma.v22:21
  7. Amabili, M., Giacomello, A., Meloni, S. and Casciola, C. M., 2015, "Unraveling the Salvinia Paradox: Design Principles for Submerged Superhydrophobicity," Advanced Materials Interfaces, Vol. 2(14), 1500248. https://doi.org/10.1002/admi.v2.14
  8. Epstein, P. S. and Plesset, M. S., 1950, "On the Stability of Gas Bubbles in Liquid-Gas Solutions," The Journal of Chemical Physics, Vol. 18(11), pp. 1505-1509. https://doi.org/10.1063/1.1747520
  9. Myeong, J., Cho, S., Lee, W., Kim, S., Park, Y. and Shin, W. G., 2021, "Image Processing Method of Two-Phase Bubbly Flow Using Ellipse Fitting Algorithm," Journal of The Korean Society of Visualization, Vol. 19(1), pp. 1-8.
  10. Bae, H., Lee, S., Song, M. and Sung, J., 2019, "Flow Visualizations and Analysis on Characteristics of Bubbly Flows Exhausted from a Venturi-Type Bubble Generator with an Air Vent," Journal of The Korean Society of Visualization, Vol. 17(1), pp. 1-9.
  11. Kim, Y.-J., Hong, J.-W., Ahn, B.-K. and Lee, J., 2024, "Visualization of Bubbly Flow Generated in an Air Lubrication System for Ships," Journal of The Korean Society of Visualization, Vol. 22(3), pp. 45-53.
  12. Paik, B.-G., Kim, K.-Y., Cho, S.-R. and Ahn, J.-W., 2007, "Study on Quantitative Visualization Using Bubble Tracer in a Cavitation Tunnel," Journal of The Korean Society of Visualization, Vol. 5(1), pp. 19-26. https://doi.org/10.5407/JKSV.2007.5.1.022