권호 표지

전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers) (The Transactions of The Korean Institute of Electrical Engineers)

대한전기학회 (The Korean Institute of Electrical Engineers)

  • 월간
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)

Aim & Scope

The first issue of The Transactions of the Korean Institute of Electrical Engineers(KIEE) was in October 1948. The Transactions of the KIEE is a monthly periodical published on the 1st day of each month. KIEE is an official publication of the Korean Institute of Electrical Engineers. The aim of the journal is to publish the highest quality manuscripts dedicated to the advancement of electrical engineering technologies. The Journal contains papers related to electrical power engineering, electrical machinery and energy conversion systems, electro-physics and application, information and controls, as well as electrical facilities. Currently, KIEE Transactions is divided into: “A” Sector (Power Engineering); “B” Sector (Electrical Machinery and Energy Conversion System); “C” Sector (Electro-physics and Application); “D” Sector (Information and Control); and “E” Sector (Electrical Facilities). With an aim to collect and publish outstanding scientific papers related to electrical engineering, the topics of papers published in KIEE Transactions are further divided into: power systems, transmission and distribution systems, electric power system economics, micro-grid, power system protection and automation, pumped-storage hydro power generation and electric energy storage systems in the “A” Sector; electrical equipment and appliances, power electronics, electrical traffic systems, new and renewable energy systems, eco-friendly electric power equipment, super-conductive equipment and E-mobility in the “B” Sector; electrical materials and semiconductors, smart large power and high voltage technology, optoelectronics and electromagnetic waves, Micro Electro Mechanical Systems (MEMS), and power asset risk management in the “C” Sector; instrumentation and control (I&C), robotics and automation, computer intelligence and intelligence systems, signal processing and embedded systems, autonomous moving object information processing, and biomedical engineering in the “D” Sector; and engineering and supervision, construction technology, power distribution system diagnosis, safety technology, electric railroad, technical standards, LVDC Facility, electric Facility fusion, etc. in the “E” Sector

http://www.trans.kiee.or.kr/ KSCI KCI SCOPUS

제60권11호

  1. 이성훈;장정호;김진오;이흥호 1993
    https://doi.org/10.5370/KIEE.2011.60.11.1993 PDF KSCI
    Today, the power utilities is setting on the slow load growth and the aging of power equipment, and then could spend the efforts on the stability of system performance. Asset management may be defined as the process of maximizing corporate profit by maximizing performance and minimizing cost over the entire life cycle of power equipment. Therefore, asset management is great way to fulfill the economic investment and the stability of system performance. This paper presents the application of effective asset managem ent from an economic perspective. A proposed method is considering the life cycle analysis using life cycle cost methodology for hydro-generator during the total life cycle. The life cycle cost methodology include a way to calculating maintenance and operating costs. The proposed method will be expected to play an important role in investment decision making considering economic evaluation.
  2. 이종훤 2000
    https://doi.org/10.5370/KIEE.2011.60.11.2000 PDF KSCI
    Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. Where calculation method of protection settings and Logic for Protection of Generator Asynchronization will be recommended, A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection this paper describes an improved backup protection coordination scheme using a new Logic that will be suggested.
  3. 이병하;황승호 2007
    https://doi.org/10.5370/KIEE.2011.60.11.2007 PDF KSCI
    In this paper, a new algorithm for alleviating overloads in power networks by the use of line power tracing and sensitivity is proposed to perform line switching and bus separation effectively. Also, a new bus separation index based on line power tracing is presented to find the bus to be separated for relieving overloads effectively. By applying the sensitivity of the line flow with respect to the change of the line impedance, both switching-on and switching-off of the lines for alleviating overloads in power networks are performed systematically at once. The number of the considered cases for line switching and bus separation can be greatly reduced and the best combination of line switching and bus separation can be acquired efficiently by the use of the sensitivity and the bus separation index. In order to show the effects of this algorithm, it is applied to a small scale power system of IEEE 39-bus system and practical power systems of KEPCO.
  4. 조수환 2017
    https://doi.org/10.5370/KIEE.2011.60.11.2017 PDF KSCI
    Flicker, which is also known as voltage fluctuation, is an electromagnetic phenomenon generated by large scale nonlinear loads, such as arc furnaces and welding machines. Since a severe and continuous flicker can cause to some damages to electrically sensitive loads as well as human's visual irritations, it needs to be appropriately managed by being accurately measured, quantified and assessed. In Korea, an equivalent 10-Hz flicker index, shortly ${\Delta}V10$, is used to determine the permission limit of flicker. This paper presents an efficient calculation of the flicker index by using a half-cycle sliding window and a recursive method, showing a concrete calculating procedure of ${\Delta}V10$ from the viewpoint of signal processing.
  5. 손현일;배인수;김진오 2021
    https://doi.org/10.5370/KIEE.2011.60.11.2021 PDF KSCI
    Recently the power system consists of the more complicated structure, due to increase of power demands. In this circumstance, the congestion and loss capacity in transmission line is also increased. Accordingly, the investment planning of transmission system is required to reduce the congestion and loss of the transmission line. This paper proposes a method to compute the congestion and loss costs which are the key elements in economic assessment of the power system planning. And the benefit of market participants in CBP (Cost Based Pool) is computed. To demonstrate the efficient of the suggested methods, these methods are applied to peak load system of 2016 in the 4th Basic plan of Long-Them Electricity Supply and Demand.
  6. 노재근;오재훈;양항준 2028
    https://doi.org/10.5370/KIEE.2011.60.11.2028 PDF KSCI
    Substation Automation System (SAS) based on IEC 61850 is becoming more and more reality in applying power systems. As well, the development of various engineering tools and the convergence with diagnostic systems are underway. To reflect recent advancements in SAS technology, the Korea Electric Power Corporation initiated a 154kV SAS pilot project and a smart power grid business in 2010. In this paper, the authors will summarize the overview and the lessons learned in applying the IEC 61850-based 154kV Main transformer bay IED solutions to these two project.
  7. 이재광;장진석;김병택 2035
    https://doi.org/10.5370/KIEE.2011.60.11.2035 PDF KSCI
    In this paper, we proposed the outer-rotor type of FSPM motor for high speed operation and optimized motor shape. First of all, combinations of pole and slot numbers are examined for the optimal back-EMF and cogging torque, then optimizes the better shape design of the permanent magnet, rotor pole width. Further, The winding turns are obtained by circle of the voltage limit equation and motor parameters to minimize the current and to improve the efficiency. As a result, the performance of the designed model is satisfied, and it is verified through a two-dimensional finite element method (2D-FEA).
  8. 양형열;서의석 2043
    https://doi.org/10.5370/KIEE.2011.60.11.2043 PDF KSCI
    High speed drive method for a fuel injector cleaner with current control is presented in this paper. The fuel injector cleaner is used for cleaning the fuel injectors in vehicles when it is clogged with deposit and rust. The fuel injector cleaner cleans the fuel injector by turning on and off the fuel injector rapidly. When the fuel injectors are cleaned, the switching speed is very important. However, when the fuel injector is turned off, the residual current in the fuel injector coil slows down the return action of the plunger in the fuel injector deteriorating performance and speed of the fuel injector cleaner. In this paper, fast turn off operation method of fuel injectors is developed for more effective cleaning. The simulation and experiment results show the validity of the proposed method.
  9. 이승구;김영록;차한주 2049
    https://doi.org/10.5370/KIEE.2011.60.11.2049 PDF KSCI
    In this paper a new current control method is proposed for the discontinuous conduction mode of boost converter. The proposed method using a current gain feedforward compensation adjusts a measured inductor current value and then, calculated an average current precisely in the discontinuous conduction mode as well as continuous conduction mode. By applying the proposed method, the current measurement error is significantly reduced to 2% regardless of the operating points. The proposed method is analyzed and its performance is investigated in simulation. To verify the feasibility of the proposed scheme, a 10kW 3-phase interleaved boost converter was built and experimental results are matched to the simulation results.
  10. 정락교;김백현;황현철 2056
    https://doi.org/10.5370/KIEE.2011.60.11.2056 PDF KSCI
    A time based software simulator for the PRT system operation is presented. The purpose of the simulator is to estimate the passenger transportation performance of the PRT system. In this paper, it is presented how the system is modeled in the simulator to estimate passenger transportation performance and the running algorithm of the modeled subsystem. An application sample is also presented to find the system's design parameter to satisfy the transportation needs.
  11. 최정식;정동화 2064
    https://doi.org/10.5370/KIEE.2011.60.11.2064 PDF KSCI
    In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.
  12. 김영춘;구본국;장문국;지학배;한상보;박재윤 2076
    https://doi.org/10.5370/KIEE.2011.60.11.2076 PDF KSCI
    The goal of this paper is to find an operating conditions of the single direct ethanol fuel cell such as the cell temperature, and flow rates of ethanol and oxygen. To investigate the output characteristics, the electrical current increased from 0[A] with interval of 0.001[A] every 2[s], and the cell voltage was increased until the voltage became 0.05[V]. Related to the effect of the cell temperature, the output characteristics both voltage and power were increased upto 80[$^{\circ}C$] according to the increase of the current density, but those were decreased over that temperature. In addition, the optimal flow rate of ethanol in anode was identified as of 2[mL/min] due to the dependence of generation rate such as the hydrogen ion and electron. And the flow rate of oxygen in cathode was desirable to about 300[sccm/min], it might be affected by the chemical reaction rate of the water formation among hydrogen ion, electron, and oxygen. Consequently, the fundamental conditions were identified in this work, and it will be carried out to find the best conditions of membrane by the effect of the plasma surface treatment, and the effect of other catalysts except for a platinum.
  13. 이정훈;진범수;신용덕 2083
    https://doi.org/10.5370/KIEE.2011.60.11.2083 PDF KSCI
    The SiC-$ZrB_2$ composites were produced by subjecting a 40:60 vol.% mixture of zirconium diboride($ZrB_2$) powder and ${\beta}$-silicon carbide (SiC) matrix to spark plasma sintering(SPS). Sintering was carried out for 60sec at $1400^{\circ}C$ (designation as TP145 and TP146), $1500^{\circ}C$(designation as TP155 and TP156) and uniaxial pressure 50MPa, 60MP under argon atmosphere. The physical, electrical, and mechanical properties of the SiC-$ZrB_2$ composites were examined. The relative density of TP145, TP146, TP155 and TP156 were 94.75%, 94.13%, 97.88% and 95.80%, respectively. Reactions between ${\beeta}$-SiC and $ZrB_2$ were not observed via x-ray diffraction (hereafter, XRD) analysis. The flexural strength, 306.23MPa of TP156 was higher than that, 279.42MPa of TP146 at room temperature, but lower than that, 392.30MPa of TP155. The properties of a SiC-$ZrB_2$ composites through SPS under argon atmosphere were positive temperature coefficient resistance (hereafter, PTCR) in the range from $25^{\circ}C$ to $500^{\circ}C$. The electrical resistivities of TP145, TP146, TP155 and TP156 were $6.75{\times}10^{-4}$, $7.22{\times}10^{-4}$, $6.17{\times}10^{-4}$ and $6.71{\times}10^{-4}{\Omega}{\cdot}cm$ at $25^{\circ}C$, respectively. The densification of a SiC-$ZrB_2$ composite through hot pressing depend on the sintering temperature and pressure. However, it is convinced that the densification of a SiC-$ZrB_2$ composite do not depend on sintering pressure under SPS.
  14. 이정훈;구철수;김인용;신용덕 2088
    https://doi.org/10.5370/KIEE.2011.60.11.2088 PDF KSCI
    The accelerated thermal aging of CSPE(chloro sulfonate polyethylene) of test cables were carried out for the period equal to 10, 20 and 30 years in air at $100^{\circ}C$, respectively. The CSPE cables(TAIHAN electric wire Co. Ltd) which installed in nuclear power plant for three years were used as starting materials. Condition monitering methods of the accelerated thermal aging of CSPE cables were estimated through indenter modulus and OIT(oxidation induction time) of IEC 62582, and those were newly estimated through volume electrical resistivity, ultrasound reflection time, density, FE-SEM(field emission scanning electron microscopy), XPS(x-ray photoelectron spectroscopy), EDS(energy dispersive spectroscopy), and WD-XRF(wavelength dispersive x-ray fluorescence). A new condition monitoring methods of the accelerated thermal aging of CSPE cables were generally coincident with trend of indenter modulus expect EDS, XPS and XRF. A volume electrical resistivity among new condition monitoring methods of the accelerated thermal aging of CSPE cables is excellent. It is considered that life-time of CSPE cable can be predicted through volume electrical resistivity, if CSPE jacket was aged for period such as more than 20 years.
  15. 이태호;김대영;조서현;정광호;이성갑 2093
    https://doi.org/10.5370/KIEE.2011.60.11.2093 PDF KSCI
    In this study, lead-free $(Na_{0.5}K_{0.5})NbO_3-BiTiO_3$ ceramics were fabricated by a conventional mixed oxide method. Structural and electrical properties of lead-free $(Na_{0.5}K_{0.5})NbO_3$ ceramics with the variation of $BiTiO_3$ were investigated. The results of X-ray diffraction analysis showed a typical polycrystalline perovskite structure without presence of the second phase in all specimens. Sintered density increased with an increasing of BTO and the specimen added with 0.07 mol% of $BiTiO_3$ showed the maximum value of 97.8%. Average grain size decreased and densification increased with an increasing of $BiTiO_3$ contents. The electromechanical coupling factor of the 0.01 mol% $BiTiO_3$ doped NKN specimens was 0.32. Dielectric constant, dielectric loss and Curie temperature of the 0.07 mol% $BiTiO_3$ doped NKN specimens were 1185, 0.145% and $400^{\circ}C$, respectively.
  16. 이호영;이종철;장용무;이세희 2097
    https://doi.org/10.5370/KIEE.2011.60.11.2097 PDF KSCI
    Discharge analysis technique for dielectric liquid was presented by using the Finite Element Analysis (FEA) under a lightning impulse incorporating two-phase flow phenomena which described gas and liquid phases in discharge space. Until now, the response of step voltage has been extensively explored, but that of lightning impulse voltage was rarely viewed in the literature. We, therefore, developed an analyzing technique for dielectric liquid in a tip-sphere electrode stressed by a high electric field. To capture the bubble phase, the Heaviside function was introduced mathematically and the material functions for the ionization, dissociation, recombination, and attachment were defined in liquid and bubble, respectively. By using this numerical setup, the molecular dissociation and ionization mechanisms were tested under low and high electric fields resulted from the lightning impulse voltage of 1.2/50 ${\mu}s$. To verify our numerical results, the velocity of electric field wave was measured and compared to the previous experimental results which can be viewed in many papers. Those results had good agreement with each other.
  17. 권오민;박주현;이상문;차은종 2103
    https://doi.org/10.5370/KIEE.2011.60.11.2103 PDF KSCI
    In this paper, the problem of passivity analysis for neural networks with time-varying delays and norm-bounded parameter uncertainties is considered. By constructing a new augmented Lyapunov functional, a new delay-dependent passivity criterion for the network is established in terms of LMIs (linear matrix inequalities) which can be easily solved by various convex optimization algorithms. Two numerical example are included to show the effectiveness of proposed criterion.
  18. 윤광희;이희진 2109
    https://doi.org/10.5370/KIEE.2011.60.11.2109 PDF KSCI
    The power system has to maintain its synchronism from transient disturbances and oscillations. To achieve this, the static var compensator(SVC), which is a flexible AC transmission system(FACTS), is applied to the power system. SVC using an advanced control algorithm improves the stability of power system. This paper is a study on design of SVC to improve harmonics and power factor of power plant. The proposed SVC analyzes harmonics, voltage drop and reactive power in real time. On the basis of the analysis of the data, the SVC using a switching control algorithm decreases harmonic signals and increases the power factor. The experimental results show that the proposed SVC enhances the stability of power system.
  19. 권오민;박명진;이상문;박주현 2119
    https://doi.org/10.5370/KIEE.2011.60.11.2119 PDF KSCI
    This paper proposes new delay-dependent robust stability criteria for neural networks with time-varying delays. By construction of a suitable Lyapunov-Krasovskii's (L-K) functional and use of Finsler's lemma, new stability criteria for the networks are established in terms of linear matrix inequalities (LMIs) which can be easily solved by various effective optimization algorithms. Two numerical examples are given to illustrate the effectiveness of the proposed methods.
  20. 진미현;이주현;최헌호;이상정;신영철;이병환;안우근;박찬식 2131
    https://doi.org/10.5370/KIEE.2011.60.11.2131 PDF KSCI
    GPS is vulnerable to jamming because of extremely low signal power. Many anti-jamming techniques are studied for complement this vulnerability. Anti-jamming techniques using array antenna are most effective technique and these techniques are required the DOA estimates. MUSIC algorithm and Root-MUSIC Algorithm are typical algorithms used in DOA estimation. Two algorithms have different characteristics, so the choice of an algorithm may depends on many factors such as the environment and the system requirements. The analysis and performance comparison of both algorithms is necessary to choose the best method to apply. This paper summarizes the theory of MUSIC and Root-MUSIC algorithms. And this paper extends both algorithm to estimate two-dimensional angles. The software simulator of both algorithms are implemented to evaluate the performance. Root-MUSIC algorithm has the computational advantage on ULA. MUSIC algorithm is applicable to any antenna array. MUSIC shows better estimation performance when number of array element is small while the computational load of MUSIC is much higher than Root-MUSIC.
  21. 배준경 2139
    https://doi.org/10.5370/KIEE.2011.60.11.2139 PDF KSCI
    In this paper, a robust adaptive controller is proposed for trajectory tracking of robot manipulators with the unknown friction coefficient and bounded disturbance. A new adaptive control law is developed based on sliding mode and derived from the Lyapunov stability analysis. The introduction of a boundary layer solves the problem of chattering. The proposed adaptive controller is globally asymptotically stable and guarantees zero steady state error for joint positions. The estimated friction coefficients can also approach the actual coefficients asymptotically. A simulation example is provided to demonstrate the performance of the proposed algorithm.
  22. 라병호;김성호;주영훈 2147
    https://doi.org/10.5370/KIEE.2011.60.11.2147 PDF KSCI
    In this paper, we propose the formation control algorithm for swarm robots. The proposed algorithm uses the artificial potential field(APF) to plan the global path of swarm robots and to control the formation movement. The navigation function generates a global APF for a leader robot to reach a given destination and an avoidance function generates a local APF for follow robots to avoid obstacles. Finally, some simulations show the validity of the proposed method.
  23. 탁명환;주영훈 2152
    https://doi.org/10.5370/KIEE.2011.60.11.2152 PDF KSCI
    In this paper, we propose the novel behavior control algorithm by using the efficient searching method based on the characteristic of the swarm robots in unknown space. The proposed method consists of identifying the position and moving state of a robot by the dynamic modelling of a wheel drive vehicle, and planing behavior control rules of the swarm robots based on the sensor range zone. The cooperative search for unknown space is carried out by the proposed behavior control. Finally, some experiments show the effectiveness and the feasibility of the proposed method.
  24. 박건준;김용갑;오성권 2157
    https://doi.org/10.5370/KIEE.2011.60.11.2157 PDF KSCI
    In this paper, we introduce a new category of fuzzy inference system based on Type-2 fuzzy c-means clustering algorithm (T2FCM-based FIS). The premise part of the rules of the proposed model is realized with the aid of the scatter partition of input space generated by Type-2 FCM clustering algorithm. The number of the partition of input space is composed of the number of clusters and the individual partitioned spaces describe the fuzzy rules. Due to these characteristics, we can alleviate the problem of the curse of dimensionality. The consequence part of the rule is represented by polynomial functions with interval sets. To determine the structure and estimate the values of the parameters of Type-2 FCM-based FIS we consider the successive tuning method with generation-based evolution by means of real-coded genetic algorithms. The proposed model is evaluated with the use of numerical experimentation.
  25. 김효진 2165
    https://doi.org/10.5370/KIEE.2011.60.11.2165 PDF KSCI
    The separate order for the electrical work is an institutional plan to improve the electrical construction quality and strengthen the competitiveness of the electrical contractors. The systematic approach for the policy implementation of the separate ordering system can make its adaptability higher and lead to a policy success. There are many kinds of effects on the implementation of the separate order, but institutional foundation is needed for increasing the policy adaptability. The necessity of the systematic and theoretical foundation was detected in various factors by considering policy implementation theory. In order to fix the separate ordering system, reasonable methods such as finding inducements and offering incentive are more effective than legal procedures. At last, a variety of policy adaptability plans must be founded in order to invigorate the separate ordering system in a view of the policy implementation.
  26. 박영;조용현;권삼영;이기원;유원희 2171
    https://doi.org/10.5370/KIEE.2011.60.11.2171 PDF KSCI
    The objective of this paper is to discuss technologies on assessing reliability of arc detectors by composing a system that generates and simulates occurrence of arc caused by loss of contact between pantographs and contact wires in a laboratory condition. In order to establish the arc simulator, a device that generates light having the bandwidth of arcs that occur between carbon-metal. The simulator was designed under conditions of EN 50317 and simulations were conducted using the developed device. According to the results, it was possible to conduct certification tests following regulations of international standards and the precision of the simulator was satisfactory. The proposed arc detector assessment system is expected to enhance precision of current collection quality performance assessment methods at high-speed lines and conventional lines while being referred as fundamental technologies for development of detectors suiting international conditions.
  27. 김재문;윤차중;김양수;장진영;이종성 2176
    https://doi.org/10.5370/KIEE.2011.60.11.2176 PDF KSCI
    This paper estimates the life cycle cost(LCC) of a propulsion control system using the maintenance information in the high speed train(KTX-1). Life cycle costing is one of the most effective approaches for the cost analysis of long-life systems such as the KTX-1. Until now, most life cycle cost of the system has been studied as a whole system viewpoint. But in case of railway industry, LCC studies are needed on the subsystem like a propulsion control system because subsystems are developed continuously localization. This paper proposes the life cycle cost model which fitted to estimate life cycle cost (LCC) using maintenance information manual. As a result, LCC on propulsion control system increased moderately expect for periodical time when major parts are replaced at the same time. Results will be reflected in the development of domestic products.