권호 표지

전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers) (The Transactions of The Korean Institute of Electrical Engineers)

대한전기학회 (The Korean Institute of Electrical Engineers)

  • 월간
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)

Aim & Scope

The first issue of The Transactions of the Korean Institute of Electrical Engineers(KIEE) was in October 1948. The Transactions of the KIEE is a monthly periodical published on the 1st day of each month. KIEE is an official publication of the Korean Institute of Electrical Engineers. The aim of the journal is to publish the highest quality manuscripts dedicated to the advancement of electrical engineering technologies. The Journal contains papers related to electrical power engineering, electrical machinery and energy conversion systems, electro-physics and application, information and controls, as well as electrical facilities. Currently, KIEE Transactions is divided into: “A” Sector (Power Engineering); “B” Sector (Electrical Machinery and Energy Conversion System); “C” Sector (Electro-physics and Application); “D” Sector (Information and Control); and “E” Sector (Electrical Facilities). With an aim to collect and publish outstanding scientific papers related to electrical engineering, the topics of papers published in KIEE Transactions are further divided into: power systems, transmission and distribution systems, electric power system economics, micro-grid, power system protection and automation, pumped-storage hydro power generation and electric energy storage systems in the “A” Sector; electrical equipment and appliances, power electronics, electrical traffic systems, new and renewable energy systems, eco-friendly electric power equipment, super-conductive equipment and E-mobility in the “B” Sector; electrical materials and semiconductors, smart large power and high voltage technology, optoelectronics and electromagnetic waves, Micro Electro Mechanical Systems (MEMS), and power asset risk management in the “C” Sector; instrumentation and control (I&C), robotics and automation, computer intelligence and intelligence systems, signal processing and embedded systems, autonomous moving object information processing, and biomedical engineering in the “D” Sector; and engineering and supervision, construction technology, power distribution system diagnosis, safety technology, electric railroad, technical standards, LVDC Facility, electric Facility fusion, etc. in the “E” Sector

http://www.trans.kiee.or.kr/ KSCI KCI SCOPUS

제65권10호

  1. 황지희;임성일 1633
    https://doi.org/10.5370/KIEE.2016.65.10.1633 PDF KSCI
    Loop system arrangement in the primary distribution system has been increased for higher reliability of power supply to the customer. This paper presents a new fault calculation method for the loop structured unbalanced distribution feeders. Mathematical modeling method of the distribution system and superposition principal based fault calculation procedures are provided. In order to establish feasibility of the proposed method, various case studies have been performed using Matlab power system toolbox.
  2. 장강현;정경훈;홍기용;김경환;최장영 1639
    https://doi.org/10.5370/KIEE.2016.65.10.1639 PDF KSCI
    This paper deals with eddy current loss analysis of Slotless Double sided Cored type permanent magnet linear generator by using analytical method, space harmonic method. In order to calculate eddy current, this paper derives analytical solution by the Maxwell equation, magnetic vector potential, Faraday's law and a two-dimensional(2-D) cartesian coordinate system. First, we derived the armature reaction field distribution produced by armature wingding current. Second, by using derived armature reaction field solution, the analytical solution for eddy current density distribution are also obtained. Finally, the analytical solution for eddy current loss induced in permanent magnets(PMs) are derived by using equivalent, electrical resistance calculated from PMs volume and eddy current density distribution solution. The analytical result from space harmonic method are validated extensively by comparing with finite element method(FEM).
  3. 이태진;조종민;신창훈;차한주 1648
    https://doi.org/10.5370/KIEE.2016.65.10.1648 PDF KSCI
    This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.
  4. 김교민;김재혁;김도현;한병문 1655
    https://doi.org/10.5370/KIEE.2016.65.10.1655 PDF KSCI
    Recently the researches on Modular Multi-level Converter (MMC) are being highlighted because high quality and efficient power transmission are key issues in the High Voltage Direct Current (HVDC) transmission system. This paper proposes an improved pre-charging method for the sub-module capacitors in MMC that operates in Nearest Level Control (NLC) modulation. The proposed method does not require additional circuits or Pulse Width Modulation (PWM) techniques. The feasibility of proposed method was verified through computer simulations for a scaled 3-phase 10kVA MMC with 12 sub-modules per each arm. Hardware experiments with a scaled prototype were performed in the lab to confirm the simulation results.
  5. 채훈규;김동희;김민중;이병국 1664
    https://doi.org/10.5370/KIEE.2016.65.10.1664 PDF KSCI
    This paper presents the analysis of the gate-source voltage of the gallium nitride high electronic mobility transistor (GaN HEMT) in the half bridge structure focused on the mutual effects of two switching operation. Especially low side gate-source voltage is analyzed mathematically according to the high side switch turn-on and turn-off operation. Moreover, the influence of each gate resistance and parasitic component on the switching characteristic of other side switch is investigated, and the formula, simulation and experimental results are compared with theoretical data.
  6. 김선태;지준근 1672
    https://doi.org/10.5370/KIEE.2016.65.10.1672 PDF KSCI
    This paper proposes a wireless parallel operation method of three-phase modular UPS inverter using resistive droop control. Furthermore, it applies a virtual resistor to droop control so that the output impedance of UPS inverter gets closer to resistive. It makes resistive droop control effective. The simulation using PSIM was performed in order to verify the validity of proposed algorithm. After consisting two-parallel system with three-phase modular UPS inverter, the experiment according to resistive load was conducted. It demonstrated the performance of current sharing and power sharing.
  7. 조수억 1682
    https://doi.org/10.5370/KIEE.2016.65.10.1682 PDF KSCI
    Approximately 520thousand elevators are operating now in Korea, about 40% ~ 60% of the elevator power is generated. In this paper, by using the method of adding regeneration power of the elevator to the grid-tied photo voltaic inverter, PV generation that was dependant on the solar radiation was significantly improved. In order to confirm this, the regeneration power of the elevator has been simulated in 12% of the rating load, and measured the regeneration power of the elevator in the actual condition to assess the differences of it. The 5[kW] hybrid grid-tied photo voltaic invertor has been fabricated to conduct an experiment for the confirmation of the proposing method. The effectiveness of the proposing method has been reassured with the result of experiment that include the transfer interface part of the regeneration power of the elevator.
  8. 이민구;심재명;임경범;이대동 1688
    https://doi.org/10.5370/KIEE.2016.65.10.1688 PDF KSCI
    In this study shall investigate the influence upon the electrical property of transformer oil due to the heat among accelerated heat degradation experiment for a constant hour in the typical insulation oils of mineral base oil, silicon base oil and vegetable oil. In addition, the electric insulation performance of insulation materials in transformer shall be evaluated through the electric property analysis according to the heat degradation of epoxy insulation material, which has been used for electric facilities such as a molded transformer.
  9. 강동원 1694
    https://doi.org/10.5370/KIEE.2016.65.10.1694 PDF KSCI
    Present thin film solar cells with hydrogenated amorphous silicon oxide (a-SiO:H) as an absorber suffer from low fill factor(FF) of 61~64 [%] in spite of its benefits related to high open circuit voltage ($V_{oc}$). Since degraded quality of a-SiO:H absorber by alloying with oxygen can affect the FF, we aimed to achieve high photosensitivity by minimizing $CO_2$ gas addition. Improving optical gap($E_{opt}$) has been attained by strong hydrogen dilution combined with lowering substrate temperature down to 100 [$^{\circ}C$]. Small amount of the $CO_2$ was added in order to disturb microcrystalline formation by high hydrogen dilution. The developed a-SiO:H has high photosensitivity (${\sim}2{\times}10^5$) and high $E_{opt}$ of 1.85 [eV], which contributed to attain remarkable FF of 74 [%] and high $V_{oc}$ (>1 [V]). As a result, high power conversion efficiency of 7.18 [%] was demonstrated by using very thin absorber layer of only 100 [nm], even though we processed all experiment at extremely low temperature of 100 [$^{\circ}C$].
  10. 김용혁 1697
    https://doi.org/10.5370/KIEE.2016.65.10.1697 PDF KSCI
    The leakage conduction and critical voltage characteristic of ZnO ceramic were investigated as a function of $Sb_2O_3$ concentration. Leakage conduction in the ohmic region increased with increasing $Sb_2O_3$ concentration and was attributed to the potential barrier height. The nonlinear coefficient increased with an increasing amount of $Sb_2O_3$. It was found that increases in the apparent critical voltages were associated with the lowered donor concentration in the grain boundary of between two ZnO grains. And the decrease of donor concentration on doping with $Sb_2O_3$ additive was attributed to the lowered capacitance in the grain boundary layer.
  11. 강동원 1702
    https://doi.org/10.5370/KIEE.2016.65.10.1702 PDF KSCI
    We propose a novel hydrogen-reduced p-type amorphous silicon oxide buffer layer between $TiO_2$ antireflection layer and p-type silicon window layer of silicon thin film solar cells. This new buffer layer can protect underlying the $TiO_2$ by suppressing hydrogen plasma, which could be made by excluding $H_2$ gas introduction during plasma deposition. Amorphous silicon oxide thin film solar cells with employing the new buffer layer exhibited better conversion efficiency (8.10 %) compared with the standard cell (7.88 %) without the buffer layer. This new buffer layer can be processed in the same p-chamber with in-situ mode before depositing main p-type amorphous silicon oxide window layer. Comparing with state-of-the-art buffer layer of AZO/p-nc-SiOx:H, our new buffer layer can be processed with cost-effective, much simple process based on similar device performances.
  12. 손의정;김동현;이호준 1706
    https://doi.org/10.5370/KIEE.2016.65.10.1706 PDF KSCI
    Electromagnetic wave simulation was performed to predict characteristics of manufactured cutoff probe at low temperature magnetized plasma medium. Microwave cutoff probe is designed for research the properties of magnetized inductively coupled plasma. It was shown that the cutoff probe method can safely be used for weakly magnetized high density plasma sources. Cutoff probe system with two port network analyzer has been prepared and applied to measure electron density distributions in large area, 13.56MHz driven weakly magnetized inductively coupled plasma source. The results shown that, the plasma frequency confirmed cut-off characteristics in low temperature plasma. Especially, cut-off characteristics was found at upper hybrid resonance frequency in the environment of the magnetic field. In case of a induced weak magnetic field in inductively coupled plasma, plasma density estimated from the cutoff frequency in the same way at unmagnetized plasma due to nearly same plasma frequency and upper hybrid resonance frequency. The plasma density is increased and uniformity is improved by applying a induced weak magnetic field in inductively coupled plasma.
  13. 박재준 1712
    https://doi.org/10.5370/KIEE.2016.65.10.1712 PDF KSCI
    AC and DC insulation breakdown voltage was studied for magnet wire coated with double layers of high flexural PAI layer and high anti-corona PAI/nanosilica (15 wt%) layer. The specimens were prepared at various drying temperatures (T/D): $22^{\circ}C$, $240^{\circ}C$, and $260^{\circ}C$, respectively. The increase effects of nanosilica on AC and DC insulation breakdown voltage were not so significant compared to that of magnet wire coil coated with original PAI. And the AC and DC insulation breakdown voltage was improved by decreasing diameter of winding coil. As T/D temperature increased, AC and DC insulation breakdown voltage decreased.
  14. 박재준 1721
    https://doi.org/10.5370/KIEE.2016.65.10.1721 PDF KSCI
    4-types of coils were prepared by coating with polyamideimide (PAI) organic/inorganic hybrid. One type was made with original PAI vanish and the other 3-types were made of double layers, that was to say, high flexural PAI layer and high anti-corona PAI/nanosilica (15 wt%) layer. Drying temperature (T/D) were $220^{\circ}C$, $240^{\circ}C$, and $260^{\circ}C$, respectively and rectangular type coil for high-voltage rotating machine was used. DC and AC electrical breakdown tests were carried out in order to study the insulation properties according to T/D temperature and coil curvature (5, 15, and $25mm{\Phi}$). As the curvature increased, electrical breakdown voltage decreased and as T/D temperature decreased, electrical breakdown voltage increased.
  15. ;유형석 1727
    https://doi.org/10.5370/KIEE.2016.65.10.1727 PDF KSCI
    Magnetic resonance imaging has a potential to produce clear anatomical as well as functional images of human body. However, the ability to diagnose is limited by signal to noise ratio (SNR) and the resolution of current medical systems. To remove the challenges prevalent due to the use of high field scanners, dedicated radio frequency coils are used. Transverse electromagnetic coils have an advantage of providing homogeneous magnetic field throughout the region but with low signal to noise ratio while surface coils have an advantage of providing higher signal to noise ratio but with low homogeneity. This research combines both the advantage into one by utilizing transmit only transverse electromagnetic radio frequency coils (8 channel) along with receive only surface coils (by varying the number) for better imaging of brain. A 7 Tesla 32-channel close fitting helmet shaped phased-array surface coils along with the combination of 8 channel transmit only transverse electromagnetic coils provided good homogeneity as well as significant SNR improvements throughout the human brain.
  16. 음혁민;윤창용 1731
    https://doi.org/10.5370/KIEE.2016.65.10.1731 PDF KSCI
    In this paper, a method is proposed to recognize human actions as nonverbal expression; the proposed method is composed of two steps which are action representation and action recognition. First, MHI(Motion History Image) is used in the action representation step. This method includes segmentation based on depth information and generates spatio-temporal templates to describe actions. Second, CNN(Convolution Neural Network) which includes feature extraction and classification is employed in the action recognition step. It extracts convolution feature vectors and then uses a classifier to recognize actions. The recognition performance of the proposed method is demonstrated by comparing other action recognition methods in experimental results.
  17. 탁명환;주영훈 1738
    https://doi.org/10.5370/KIEE.2016.65.10.1738 PDF KSCI
    In this paper, we present localization and autonomous navigation method using GPU(Graphics Processing Unit)-based SIFT(Scale-Invariant Feature Transform) algorithm and virtual force method for mobile robots. To do this, at first, we propose the localization method to recognize the landmark using the GPU-based SIFT algorithm and to update the position using extended Kalman filter. And then, we propose the A-star algorithm for path planning and the virtual force method for autonomous navigation of the mobile robot. Finally, we demonstrate the effectiveness and applicability of the proposed method through some experiments using the mobile robot with OPRoS(Open Platform for Robotic Services).
  18. 조우형;권성호;권장우;이상민 1746
    https://doi.org/10.5370/KIEE.2016.65.10.1746 PDF KSCI
    In this paper, we provide a development and evaluation method for an archery posture analyzing system, using an inertial sensor. The system was developed using LabVIEW2014 by National Instruments and evaluated using the DTW algorithm. To convert the voltage value of the inertial sensor into a physical value, a coordinate transformation matrix bias was applied. To evaluate the similarity of movement in archery shooting, the DTW distance was calculated and similarity was confirmed based on simple mechanical movement, the same person's shooting movement, shooting movement with another person, and the noise signal. The average similarity comparison results were as follows: simple mechanical movement was 17.05%, the same person's shooting movement was 26.48%, shooting movement with another person was 62.8%, and the noise signal was 328.5%; a smaller value indicates a higher level of similarity. We confirmed the possibility of analyzing the archery posture using 3-axis acceleration of the inertial sensor. We inferred that the proposed method might be important means for assessing shooting skills, evaluation of archer's progress, and finding talented archers in advance.
  19. 바스넷버룬;이인재;노명준;천현준;자파르아만;방준호 1755
    https://doi.org/10.5370/KIEE.2016.65.10.1755 PDF KSCI
    Automation of greenhouses has proved to be extremely helpful in maximizing crop yields and minimizing labor costs. The optimum conditions for cultivating plants are regularly maintained by the use of programmed sensors and actuators with constant monitoring of the system. In this paper, we have designed a prototype of a smart greenhouse using Arduino microcontroller, simple yet improved in feedbacks and algorithms. Only three important microclimatic parameters namely moisture level, temperature and light are taken into consideration for the design of the system. Signals acquired from the sensors are first isolated and filtered to reduce noise before it is processed by Arduino. With the help of LabVIEW program, Time domain analysis and Fast Fourier Transform (FFT) of the acquired signals are done to analyze the waveform. Especially, for smoothing the outlying data digitally, Moving average algorithm is designed. With the implement of this algorithm, variations in the sensed data which could occur from rapidly changing environment or imprecise sensors, could be largely smoothed and stable output could be created. Also, actuators are controlled with constant feedbacks to ensure desired conditions are always met. Lastly, data is constantly acquired by the use of Data Acquisition Hardware and can be viewed through PC or Smart devices for monitoring purposes.
  20. 김영석;김택희;김종민;송길목 1761
    https://doi.org/10.5370/KIEE.2016.65.10.1761 PDF KSCI
    In this paper, we investigated the fusing current of carbon fiber and thermal properties of carbon fiber and metal shielded cable due to over-current. The fusing current value for the metal-coated carbon fiber was 5.3A in 3K, 7.4K and 13.05A in 12K. And if it exceeds 50% of the fusing current was broken with a rapid voltage rise. In the case of carbon fiber shielded cable, the temperature of the PVC sheath increased somewhat in the allowable current range. However, the temperature of PVC sheath rapidly increased to $128.1^{\circ}C$ in the 2 time allowable current range. This value is $10^{\circ}C$ higher than the temperature of PVC sheath on the metal screen cable, because the resistance of the carbon fiber is high and heat transfer rate is slow.
  21. 전정채 1767
    https://doi.org/10.5370/KIEE.2016.65.10.1767 PDF KSCI
    Every year, lives are lost due to electrical safety accidents that could have been prevented with proper education and awareness of electrical safety. To prevent such accidents, experiential education is more effective than indoctrination education. This paper describes the electrical safety education system based on virtual reality (VR) and evaluates effect of the proposed system. Users operated the experiential electrical safety education system, and they were provided electrical stimulation in an electric shock experience using a haptic device. Appropriate stimulation values were calculated according to age (children vs. adults) and gender through experiment. The scenario in which participants experience electrical safety in the home environment was structured, and related educational contents was produced. A total of 68 healthy elementary students evaluated the educational effect of the system. The results showed that the educational effect and the sustainability of effect of the proposed system are superior to those of existing multimedia learning methods. By implementing electrical safety education stimulating the senses of human, the learning effect was promoted and this experiential education would be able to prevent electrical accidents.
  22. 김재진;전정채 1774
    https://doi.org/10.5370/KIEE.2016.65.10.1774 PDF KSCI
    This paper proposes a portable cable fault detection system with automatic fault distinction and distance measurement using time-frequency correlation and reference signal elimination method and automatic fault classification algorithm in order to have more accurate fault determination and location detection than conventional time domain refelectometry (TDR) system despite increased signal attenuation due to the long distance to cable fault location. The performance of the developed system method was validated via an experiment in the test field constructed for the standardized performance test of power cable fault location equipments. The performance evaluation showed that accuracy of the developed system is less than 1.34%. Also, an error of automatic fault type and location by detection of phase and peak value through elimination of the reference signal and normalization of correlation coefficient and automatic fault classification algorithm not occurred.
  23. 김영석;김택희;김종민;송길목 1780
    https://doi.org/10.5370/KIEE.2016.65.10.1780 PDF KSCI
    This paper presents few case studies of state diagnosis of XLPE cables using very low frequency techniques. The power cables of 22.9kV which have installation fault were assessed using VLF technique in addition to other techniques like insulation resistance and DC voltage withstand test. From the experimental results, The dielectric loss($tan{\delta}$) values of degradation of the cable(joint, knife, needle) at $U_0$ were 5.839, 5.526 and 6.251, respectively and all values were "further study advised". VLF PD measurement was also found defective portion. These method was effective in defect to fault in the degradation of the cable. However, the breakdown did not occur in the degradation of the cable because of properties of XLPE insulation. Few case studies of using VLF $tan{\delta}$ diagnosis for fault are measured and analyzed. The $tan{\delta}$ values at $U_0$ were "further study advised" or "action required".
  24. 한병조;이연;류봉조;구경완 1786
    https://doi.org/10.5370/KIEE.2016.65.10.1786 PDF KSCI
    The damage has occurred inside the semiconductor pattern When using conventional wet station for semiconductor. It was used for electrolytic ion water generator in order to prevent damage to the semiconductor pattern. It was designed and developed a flow path electrode and the mesh electrode to check the efficiency of the electrode. And It confirmed the expected results through the simulation of the flow path. and ORP were measured in accordance with the current and voltage of mesh electrode and flow paht electrodes. Flow path electrode 22A is 3V, up to pH 9.8, the value of ORP-558mV was measured and the mesh electrode was measured up to pH 9.8, ORP -350mV.