권호 표지

Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering

  • Quarterly
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

Domain

  • Economics/Management ＞ Business Strategy/Ethics

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

Volume 16 Issue 28

  1. 임석철;김내헌;김형석 1
    PDF
    Electrical or electronic products have been becoming smaller and high integrated recently, with printed circuit boards(PCB's) being the key components for these products. The introduction of new technology of surface mounted devices(SMD) opens new ways towards high integration on the PCB. Many plants in eletronical industry which produce high variety of PCB's to meet the demands of customer orders require flexibility in PCB's production lines. This survey paper describes the related optimization problems and solution methods to the automated surface mount technology(SMT) assembly lines, and provides with the research direction for improving flexibility.
  2. 김내헌;장중순;임석철 9
    PDF
    We present a production planning and control system suitable for small to medium sized, order-based companies producing special gases of small-quantity. The proposed system uses cards each of which represents individual unit of order. The components and procedure of the system are described in detail. The proposed system is easy to implement because it visualizes the amount and distribution of the received orders; and requires minimum aid of computer.
  3. 송종대 21
    PDF
    We want to know the interrelationship among the four components of Total Quality Cost. So that we will be able to say what changes will occur in one when another is changed Even though the relationship among the component Cost is as varied as there are companies keeping such cost systems, existence of some general pattern is hypothesized at least among similar companies doing similar business or producing similar products. The purpose of this study is to drive Optimum Quality Cost on base of the result of the quality cost analyses in N business, after multiple regression model with failure cost as dependent variable is established. Vector Optimization (VOP) method were used for solving multiobjective decision ploblem.
  4. 신용백;윤상원;윤석환;변화성 31
    PDF
    Box-Jenkins models have some important limitations to the procedure : (a) They require a great deal of time, efforts and expertise for the model identification. (b) They require an extensive amount of past observations to identify an acceptable model. (c) The model selected is a constant model in time. Therefore, the Kalman Filter is recommended as a technique to overcome the three problems mentioned above. The research reported here uses the Kalman Filter algorithm to propose Kalman-AR(p) model. The data analysis shows that the Kalman-AR(p) model proposed can be used to resolve the problems of Box-Jenkins AR(p)model. It is seen that the Kalman Filter has great potentials for real-time industrial applications.
  5. 김성태;김재연 39
    PDF
    In this paper, We develop performance evaluation model for Twin fork Automated Storage/Retrieval systems. The system is modeled as a modified bulk service queueing system consisting of one exponential server with limited system capacity. The differance between this model and general bulk service queueing model is the inequality of transition service rate of each stage. The ejective of this model is to provide system characteristics for Twin fork AS/R system design problems, which are the number of customers in system, wait time in system and queue, the system queue size.
  6. 구일섭;신현균 49
    PDF
    We have been recognize the adaptation of JIT(Just-in-Time) production system is necessary to improve the constitution of enterprises. But this system is not settled in our industrial environment owing to misunderstanding of JIT concepts and lack of participation all members of the oranization. This paper deals with systematic application of the JIT subsystems such as U-form layout, flexible workforces with multi- functional skilled workers and adjustment of standard operations procedures. And a successful productivity improvement case study of a small and medium sized industry was dealt.
  7. 양화섭;유병남 59
    PDF
    Recently, The concept of strategic groups is recognized as a basic unit of understanding framework in strategic management research. Researchers have consistently approached the relationship between strategic groups and organizational variables(organization structure vs strategies, management process vs strategies, management systems vs strategies, environment vs strategies, strategies vs performance). However the relationship between strategic groups and human resources has been neglected in theortical approach and empirical approach. Therefore this study explores the relationship between strategic groups and human resources management.
  8. 임치환;이민구 69
    PDF
    The evaluation of product may be classified by technical tests or by ergonomics assessments. If an ergonomics assessment is required, then the three types of interface dimension are available to the researcher. In this paper, we proposed the heuristic evaluation method for usability of product in the three types of interface dimension The evaluation method is used the fuzzy weighted checklist technique computerized for evaluating or comparing prototype of system and IT product.
  9. 양정회 77
    PDF
    This paper deals with the strategic quality concepts in terms of competition reinforcements. Quality is recognized as critical to modern competition Quality systems have been evolving rapidly in recent years. The companies need to blow how to improve quality if Hey are to survive. In order to this, this paper focused on new approach of 'quality concepts,' 'quality costs & decomposition,' 'quality management & quality cultures,' etc.
  10. 강창욱 87
  11. 김양호;정윤성;김광섭 93
    PDF
    In this paper, two adaptive exponentially weighted moving avenge control chart schemes which available for real-time are proposed. The weighting coefficient is estimated using a recursive kalman filter algorithm. Simulated average run lengths indicate the proposed schemes are sensitive to process shifts And their performance is comparable to CUSUM control chart and customary EWMA control chart.
  12. 정수일 103
    PDF
    This paper studies computer programming for the analysis of data obtained by experiments using Orthogonal Arrays. The following items are considered in the computer programming : * significant digits in the computation of Sum of Squares, Mean Squares and Variance Ratios * containing the necessary F-distribution values in the program. * matching the rules of KS A 0021 and 3251 in the digit treatments etc. The running results of ANOVA Table and Pooled ANOVA Table of a fictitious example is added with the parts of a program. It should be mentioned that the main purpose of this paper is in the arousing of the discussion about significant digits concept in the computer programming for various kinds of Statistical Methods.
  13. Ji-Seung Kim 109
    PDF
    본 논문은 품절기간 중 수요의 일부는 부재고되고 나머지 일부는 유실되는 재고 모형을 제시한다. 부재고되는 수요량은 불확실하다. 따라서 부재고되는 수요의 양을 확률변수로 놓고, 부재고되는 수요량의 표준편차가 누적품절량의 크기에 비례하는 경우를 다루었다. 투영에 의한 분해법(decomposition by projection)을 사용하여 최적 재고 정책을 도출하였다.
  14. 신용백;윤석환;변화성 115
    PDF
    In this study, as one of the methodologies for supplementing the deficiencies which are likely to happen in implementing the Joint Research and Development Project we suggest the Quality Assurance System applicable through analyzing the cases. In Quality Assurance System in implementing the Joint Research and Development Projects, the mutual review & approval method for the output by stages, technology interchange method, the frequent meeting among engineers, the test plan and the configuration management system should be provided.
  15. 김형준 125
    PDF
    히스토그램은 주어진 데이타가 해당하는 분포의 밀도함수를 그리는데 널리 이용되는 기본적인 방법이다. 히스토그램은 어떠한 분포에도 이용이 가능하며, 그 작성이 간단하지만 구간의 선택과 그 넓이의 선정에 어려움이 있다. 본 논문에서는 이와 같은 적정 계급구간의 수를 설정하기 위한 문제를 일종의 통계적 모형선택 문제로 간주하여, 최근 모형선택의 평가기준으로 널리 이용되고 있는 AIC에 바탕을 두고 적정 계급구간의 결정과정에 대해 분석하였다.
  16. 하정진;황규완 129
    PDF
    Quality is become not only the most critical component of manufacturing strategy but also the most critical measure of performance and justification of advanced manufacturing system. The objective of this paper is to offer classification & optimum concept of quality-cost and to illustrate a method of evaluation quality-cost then a case example is presented to illustrate the result of quantifying the suggested formula and these values are given to justify of management.
  17. 이희춘 137
    PDF
    Generally there are three methods to derive an approximation formula: 1) approching standard normal distribution by appropriate changing variable 2) using standardization variable for expansion 3) deriving approximation formula by direct method. This paper present correction terms having the form of $C_{1/v^{n/2}}/{\;}+{\;}C_2{\;}(n=1,2)$ with respect to $x^2_{\alpha}(v)$ distribution (${\nu}{\;}{\leq}{\;}30$), which minimize the error by EDA method and least square method.
  18. 엄태원 145
    PDF
    This paper studies the estimation of hazard parameters, which have a close relation with product reliability characteristics in reliability test. Among the many kinds of estimation methods, hazard Probability Paper(HPP) is commonly used. The HPP is very convenient, but it has a great disadvantage in estimation W by plotting method It is very difficult to get the same results even if one use the same data several times. A computer program for the regression method is used for the parameter estimation to reduce these errors. Especially, the computer graphic program was written in GW-BASIC 3.22 language and a couple of running examples for user's reference appears in the appendix part.
  19. 이성호 157
    PDF
    The problem of manufacturing flexibility(MF) is assuming increasing importance in business environment This paper examines definition and classification of MF based on the literature. Using empirical data and employing factor analysis, MF was measured.
  20. 김봉선;이춘선 165
    PDF
    The algorithm of Giffler and Thompson is modified for solving job shop scheduling problems related to the overlapping production The start-lag and stop-lag are also applied New priority rules for the overlapping production are proposed and the efficiency of them is compared with that of the classical priority rules.
  21. 서경범 173
    PDF
    This paper is to propose the procedure for improving the level of product specification in statistical process control using loss function. The procedure proposed in this paper is extended to the Taguchi's Quality engineering concept This procedure will be useful in establishing product specification. This paper is aimed to provide customer satisfaction for consumer and quality management for producer.
  22. 이석훈;이상설;강희정 181
    PDF
    The objective of this paper is to present a method for synthetic performance and quality evaluation of dial up network modem in users place. In the past, universally recognized criteria have not been available to model switched network modem performance. Reasonable assurance of modem performance on the public switched telephone network by standardized test channel which is suggested by ELA(Electronic Industries Association). These tests of modem from a variety manufacturers more reflective of actual performance on the network.
  23. 이덕수 187
    PDF
    This paper aimed at investigating the relationships between business culture and management innovation. Some descriptive analyses were made, and a case study was conducted As a result it was shown that the firm with good business culture and good fellowships could achieve the goal of business innovation more efficiently than the other firm without good business culture.
  24. 김내헌 195
    PDF
    This paper considers the vehicle routing problem taking account of not only delivery but pick-up at the same time. A mathematical formulation is presented for finding the route which satisfies all the demands of customers and enables picking up most containers without exceeding the capacity of the vehicle. A table comparing traveling distance and the pick-up amount is provided by using heuristic method, which will be of help to the decision makers.
  25. 김진용 203
    PDF
    In Factory Automation environments such as FMS, the formation of machine-part based on GT should be considered. The purpose of this study is to develop a economic heuristic algorithm which considers various elements such as unit processing time, subcontract cost, and functional operation cost, machine processing capacity etc. When this proposed approach is applied to the real situation expected benefits are as follows: the reduction of production lead time work in process, labor force, tooling, rework and scrap, setup time, order time delivery, and paper work, etc.