권호 표지

Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering

  • Quarterly
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

Domain

  • Economics/Management ＞ Business Strategy/Ethics

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

Volume 23 Issue 54

  1. 이종섭;황종원;강맹규 1
    PDF
    This study suggests the partition algorithm for updating the discovered association rules in large database, because a database may allow frequent or occasional updates, and such update may not only invalidate some existing strong association rules, but also turn some weak rules into strong ones. the Partition algorithm updates strong association rules efficiently in the whole update database reuseing the information of the old large itemsets. Partition algorithms that is suggested in this study scans an incremental database in view of the fact that it is difficult to find the new set of large itemset in the whole updated database after an incremental database is added to the original database. This method of generating large itemsets is different from that of FUP(Fast Update) and KDP(Kim Dong Pil)
  2. 이규용;문치웅;김재균 13
    PDF
    Machining route selection to produce parts should be based on shop flow information because of input data at scheduling tasks and is one of the main problem in process planning. This paper addresses the problem of machining route selection in multi-stage process with machine group included a similar function. The model proposed is formulated as 0-1 integer programing considering the relation of parts and machine table size, avaliable time of each machine for planning period, and delivery date. The objective of the model is to minimize the sum of processing, transportation, and setup time for all parts. Genetic algorithm approach is developed to solve this model. The efficiency of the approach is examined in comparison with the method of branch and bound technique for the same problem. Also, this paper is to solve large problem scale and provide it if the multiple machining routes are existed an optimal solution.
  3. 한경록;김재련 27
    PDF
    The problem of discovering association rules is an emerging research area, whose goal is to extract significant patterns or interesting rules from large databases and several algorithms for mining association rules have been applied to item-oriented sales transaction databases. Data warehouses and OLAP engines are expected to be widely available. OLAP and data mining are complementary; both are important parts of exploiting data. Our study shows that data cube is an efficient structure for mining association rules. OLAP databases are expected to be a major platform for data mining in the future. In this paper, we present an efficient and effective algorithm for mining association rules using data cube. The algorithm can be applicable to enhance the power of competitiveness of business organizations by providing rapid decision support and efficient database marketing through customer segmentation.
  4. 황동섭 37
    PDF
    This study is focused on confirmation of the usefulness of EVA through the empiritical test of it which is used in practical business as the new performance measures of the VBM(value based management). The results of test are as followed : We could confirm the possibility that the EVA per share could be used as the useful performance measure as it shows the positive relation with the stock prices. The explanatory power showed especially higher than any other cases if the EPS shows positive and the EVA per share shows positive. When we interpret this study, we must keep in mind that the magnitude of the EVA is very different from by organs of publication in our country. Accordingly, the study to confirm the usefulness of EVA must be basically limited. Therefore, to get the useful result through the study related with the EVA, the publication of the trustful EVA must be proceeded by unified standard.
  5. 송창용 45
    PDF
    본 연구에서는 공구이송장치(Tool Transporter)의 이용횟수를 최소화하는 공구교환문제(Tool Switching Problem)를 다룬다. 한 기계에서 생산해야 하는 제품들이 요구하는 공구의 총수가 기계에 장착할 수 있는 공구의 수보다 많은 경우 각 제품을 생산할 때마다 공구이송장치를 이용한 공구교환이 필요하다. 공구저장소(Tool Crib)와 기계간에 한 번에 이송할 수 있는 공구의 수가 제한되어 있기 때문에 공구이송장치의 이용률에 따라서 기계의 생산성이 크게 달라진다. 그러나 기존의 연구에서는 공구이송장치의 능력을 배제하고 공구교환횟수만을 고려하고 있다. 따라서 본 연구에서는 공구이송장치의 이용횟수의 최소화를 목적함수로 하는 공구교환문제를 수리적으로 모형화하고 이 문제에 대해 기존의 최적 공구교환방법을 적용하여 얻어지는 해는 최적해를 보장할 수 없다는 점과 공구가 필요한 시점보다 먼저 장착하는 경우(Early Insertion)를 고려할 때 기존 방법에 의한 해보다 좋은 해를 얻을 수 있다는 특성을 간단한 예를 통하여 보여준다. 또한, 이러한 특성을 고려한 새로운 공구교환방법을 제시하고 다양한 유형의 예제를 통하여 기존의 방법과 비교한다.
  6. 이상보;정민용 55
    PDF
    Due to change in management environment and paradigms, companies need to the open management system that provides information for real-time costing, customer satisfaction, decision making support, responsibility management etc. We are not ready to implement this system yet. But we must introduce a new management system, i.e., ABMS(Activity- Based Management System) on the basis of the ARC(Activity-Based Costing) by development of production/information technique. This paper realizes foundational concepts of Activity and ABC, reestablishes the concept of ABC correctly and expands ABC for ABMS. Thus this paper is useful for ABMS modeling, leading competitors, total productivity improvement and strategic management for the best quality and service.
  7. 윤연근;남현우;이상완 65
    PDF
    Cellular manufacturing(CM) is a philosophy and innovation to improve manufacturing productivity and flexibility. Cell formation(CF), the first and key problem faced in designing an effective CM system, is a process whereby parts with similar design features or Processing requirements are grouped into part families, and the corresponding machines into machine cells. Cell formation solutions often contain exceptional elements(EEs). EE create interactions between two manufacturing cells. A policy dealing with EEs considers minimizing the total costs of three important costs; (1)intercellular transfer (2)machine duplication and (3)subcontracting. This paper presents an effective cell formation method with fuzzy nonlinear mixed-integer programming simultaneously to form manufacturing cells and to minimize the total costs of eliminating exceptional elements.
  8. 이근형;황승국;이강우 77
    PDF
    One form of job shop scheduling problem in contemporary automated manufacturing such as flexible manufacturing systems (FMS's) is presented which we call the FMS dispatching priority problem. The FMS dispatching priority problem seeks the best dispatching priority of parts and operations, and is essentially a combinatorial optimization problem. Because of the complicated mechanism of the system, the performance of a given dispatching priority must be evaluated via simulation. Simulated annealing have been applied to the problem, and it is found that appropriate parameter setting will be desirable to get good, if not the optimal, solutions within a limited amount of time under the presence of heavy computational burden due to simulation. More specifically, experiments reveal that initial temperature is the single most important factor among other parameters and factors, and that the appropriate initial temperature depends on the allowable computer time in such a way that the less time one can afford to spend, the lower the appropriate initial temperature should be.
  9. 조동원;이영해 87
    PDF
    To constuct the stochastic model for performance evaluation of Multi-AGV, two aspects must be considered. The first is stochastic situation for moving jobs. The second is the dispatching rule of AGV. In this paper, the stochastic model for performance evaluation of Multi-AGV is developed. The case of stochastic model with two AGV is developed. But it difficult to solve in the case of stochastic model with more than three AGV because the model have three-ordered equations. The evaluation factor of the model is utilization and empty travel time of AGV. Using these factors, one can easily evaluate a wide range of handling and layout alternatives from given flow data. Hence, the model would be most effective when used in the early stage of designing to narrow down the number of alternative prior to simuation.
  10. 유재권;정수일 97
    PDF
    As more and more companies pursue ISO 9000 certification, one of the most misconceptions about ISO 9000 is that registration is necessary only for business. ISO 9000 is being driven by commercial requirements, not legal fiat. This registration can be used as evidence of compliance to the ISO 9000 to satisfy specific customer requirements. The primary objective of this research is to provide the efficient implementation process of ISO 9000 certification on the basis of total quality management concerning with ISO/CDl 9001:2000, ISO/CDl 9004:2000 and ISO/CD2 9001:2000. Based on the result of first paper in May 1999, this study has been conducted using the data collected from 312 manufacturing companies which registered ISO 9000 certification. This analysis can be applied to Korean small and medium industrial companies in establishing and maintaining the development of qualify systems. The companies should be able to benefit if they make continuous effort to improve the quality activities based on the factors suggested in this paper.
  11. 최성운;이락구 111
    PDF
    In this study we analyzed the relationship between sensibility image and the needs to purchase, by studying the relations between the brand name of the beer which consumers recognize and the needs to purchase, and by extracting the sensibility image from the consumers about how they feel about the advertisement. For the survey we first chose 30 sensibility related adjectives from the preliminary survey and chose the 6 most selected sensibility related adjectives by showing beer advertisements from the 3 leading companies. In the main survey we used 7 point scale measurement to evaluate the sensibility scale in each advertisement using the 6 sensibility related adjectives we chose from the preliminary survey, such as cleanness, coolness, pleasantness, softness, easiness, and studied why they feel that way about the advertisement. We hope to contribute on establishing the advertising strategy of the company, based on sensibility image which the consumers are in favor of.
  12. 이광희 119
    PDF
    This study develops the pay satisfaction questionnaire for Korean employees. Based upon the review of previous studies, 16 questionnaire items are developed. Exploratory factor analysis results in a modified measurement through item deletion, item-to-dimension reassignment, and dimension combination. The measurement model was good fit assessed by overall fit measures(GFI; goodness of fit index, AGFI; adjusted goodness of fit index, RMR; root mean square residual) criteria, lambda score, and squared multiple correlation with confirmatory factor analysis. Implication of this work for future theoretical and empirical development are suggested.
  13. 홍상우 129
    PDF
    This paper proposes six systematic steps that aimed at eliminating safety problem as far as possible. In the proposed steps, it is emphasized that attention should be paid not only to physical conditions but also to psychosocial conditions, as unsatisfaciory psychosocial work environment in many cases has proved to contribute to safety problems. The most common obstacles to obtaining positive intervention results are also described. These are lack of commitment from the line managers point of view, neglecting to engage technicians and employee concerned, ignoring to take psychosocial conditions into consideration, and ignoring the impact of the proposed changes on the wage system and the organizational system The proposed steps are based upon gradually developed and empirically tested existing method aimed at solving the problems.
  14. 서교택;이상신 137
    PDF
    The chloroprene adhesive for ladies' shoe-making applied by the cementing method in KS G 3116 has been evaluated.. For the quality test of adhesive for pump whole cut vamp using chloroprene adhesive, general property and adhesion strength were measured and duration for environmental exposure was tested. Also, a list of experiments for field application was prepared. In case of adhesion-strength measurement,, the KS G 3116 method of peel strength at end of toe was found to be reasonable by measurement through a whole length, toe to heel seat on feather edge.
  15. 김연수;정영배 145
    PDF
    The importance of reliability information management for an effective product quality management has been increased. Reliability management requires many different kinds of human and technical expertise and cost over the various discipline in the organization. However, it is difficult task to set up appropriate and effective life data analysis because of lacking engineers with reliability knowledge, statistical background and of funds in small and medium-sized enterprise. It is needed to develop a low cost implementation architecture of reliability information supporting system for small and medium-sized enterprise under web environment. In this paper, research efforts are presented to solve such problems of small and medium-sized enterprise under web environment.
  16. 최성운 155
    PDF
    The fault diagnosis is a systematic and unified method to find based on the observing data resulting in noises. This paper presents the fault prediction and diagnosis using fuzzy expert system technique to manipulate the uncertainties efficiently in predictive perspective. We apply a fuzzy event tree analysis to the computer system, and build up the fault prediction and diagnosis using fuzzy expert system that predicts and diagnoses the error of the system in the advance of error.
  17. 강영식 167
    PDF
    The problem of system reliability is very important issue in the nuclear power plant, because the failure of its system brings about extravagant economic loss, environment destruction, and quality loss. This paper therefore proposes a normalized scoring model by the qualitative factors order to evaluate the robust reliability of nuclear power plants under uncertainty. Especially, the qualitative factors including risk, functional, human error, and quality function factors for the robust justification has been also introduced. Finally, the analytical reliability and safety assessment model developed in this paper can be used in the real nuclear power plant.