권호 표지

한국세라믹학회지 (Journal of the Korean Ceramic Society) (Journal of the Korean Ceramic Society)

한국세라믹학회 (The Korean Ceramic Society)

  • 격월간
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)

과학기술표준분류

  • 재료 ＞ 세라믹재료
  • 재료 ＞ 분석/물성평가기술

Aim & Scope

The Journal of Korean Ceramic Society publishes the original and significant results of experimental and theoretical research relating to all categories of ceramics including composites and hybrids. The journal aims at providing an international forum for fundamental understanding and applied knowledge of the relationship between processing, microstructure and properties of ceramics. The scope of the journal includes basic science and classical ceramics, engineering ceramics, electronic and energy ceramics, noncrystalline ceramics, ceramics related to nanoscience, bioceramics, and emerging fields of ceramics. The Journal of Korean Ceramic Society is a peer-reviewed international journal. It features three types of submissions: Full Length Paper, Review Paper, and Communications which contain reports of original research and reviews on all aspects of ceramics and ceramics-based composites ranging from fundamentals to application.

http://211.116.129.33/home/kor/article/submission/submission_login_form.asp?globalmenu=3&localmenu=0 KSCI KCI SCOPUS

제36권12호

  1. 이상진;박홍채;전병세 1281
    PDF
  2. 장명철 1287
    PDF
  3. 천승호;황규홍;전병세 1296
    PDF
  4. 이하용;박용환 1303
    PDF
  5. 김재석;이종봉;허태무;이호용;김도연 1310
    PDF
  6. 이장식;박응철;박정호;이병일;주승기 1316
    PDF
  7. 박종현;김동현;이종영;김광호 1322
    PDF
    In2O3 thick film gas sensor for detecting NOx gas of high concentration was fabricated by a screen printing technique. This work focussed on investigation of the change of sensitivity to NOx gas with firing temperatures of sensing layer and on improvement of the sensitivity by adding catalysts such as Al,. Ru, and SnO2 The cross sensitivites of sensor to CO, H2, CH4 and i-C4H10 gases were also examined under NO2 gas concentration of 200ppm Pure In2O3 gas sensor prepared at a firing temperature of 50$0^{\circ}C$ showed a maximum sensitivity to NOx gas at the operating temperature of 40$0^{\circ}C$ Al(0.004 wt%)-In2O3 sensor largely improved the sensitivities to both NO2 and NO gas and showed a superior selectivity compared with other gas sensors.
  8. 성제홍;김정주;김남경;조상희 1327
    PDF
    Behaviors of abnormal expansion during calcination process of Ba2Ti9O20 ceramics and its related effects on the sintering characteristics were investigated as a function of precursors. When BaCO3 and TiO2 powders were used as starting materials. BaTi4O9 phase which has relatively large molar volume was formed drastically with abnormal ex-pansion during the calcination at 95$0^{\circ}C$ to 115$0^{\circ}C$ ON the contrary using BaTiO3 and TiO2 powders as starting materials led to retardation of the formation of BaTi4O9 phase and concurrently suppressed the abnormal expansion during cal-cination process. Especially the calcined powder of BaTiO3 and TiO2 had advantages in the densification and formation of Ba2Ti9O20 single phase in the sintering process.
  9. 이순일;백승봉;김명호 1335
    PDF
    The electrical conductivity ($\sigma$) of TiO2 doped with 0.05-4.0mol% Nb2O5 was measured in the oxygen partial pressure range of 10-17 to 100 atm and temperature range of 1100 to 130$0^{\circ}C$ to investigate the electrical properties and defect types. The oxygen partial pressure dependence of the electrical conductivity (log$\sigma$/logPo2) above 110$0^{\circ}C$ was divided into the four regions. From these experimental results the following defect regions were proposed ; 1) Magneli phase(extended defect) 2) reduced rutile region where intrinsic defect predominates 3) nearly stoichiometric region which is independent on the oxygen partical pressure and 4) overstoichiometric region which is not observed in pure TiO2 The electrical conductivity of Nb-doped TiO2 depended on the doping content the oxygen partial pressure and the measuring tem-perature.
  10. 손영도;송태웅 1342
    PDF
    In order to improve the density and the mechanical strength without change in chemical composition the hardened pastes of hydroxyapatite cement were reinforced with powders and/or whiskers of hydroxyapatite. The powders behaved as a seed of hydroxyapatite formation rather than a filler while the whiskers were mrerly dispersed in matrix and capillary pores of the hardened bodies leading to increase in mechanical strength. But the increase in strength But the increase in strength was nnt enough owing to the lack of homogeneous dispersion of the fibers. The highest diametral tensile strength of 18.5 MPa was measured at the hardened hydroxyapatite body in which well-dispersed whisker phase formed uniformly during hydro-thermal curing of power-added and dry-formed hydroxyapatite cement.
  11. 윤장석;이인규;임욱;조현민;박종철 1350
    PDF
    Sintering characteristics and dielectric properties of low temperature sinterable Glass/Ceramic dielectric materials were investigated. The dielectric materials which were developed for microwave frequency applications consist of SiO2-TiO2-Bi2O3-RO system(RO:BaO-CaO-SrO) crystallizable glass and Al2O3 as a ceramic filler. Sintering experiments showed that no more densification occurred above 80$0^{\circ}C$ and bulk density and shrinkage depended on Al2O3 content only. Results of dielectric measurements showed that $\varepsilon$r Q$\times$f and $\tau$f of the material containing 30wt% Al2O3 were 17.3, 600 and +23 ppm respectively. Those values for 45 and 60wt% Al2O3 samples were 11.6, 1400, +0.7 ppm and 7.2, 2000, -8.5 ppm, repectively. The results clearly showed that the Glas/Ceramic materials of present experiment decreased in $\varepsilon$r and increased in $\times$f value and changed from positive to negative value in $\tau$f value with the increasement of Al2O3 content.
  12. 박종곤;이종국;서동석;김민정;이은구;김환 1356
    PDF
    출발원료의 상분을 제어와 가압소결 및 열처리에 의하여 자체강화 미세구조를 갖는 탄화규소 세라믹스를 제조하여 그 특성을 고찰하였다. 자체강화 탄화규소 세라믹스는 알파상과 베타상 탄화규소 분말을 혼합한 모든 원료조합으로부터 얻어졌으며, 이러한 미세구조는 열처리 동안 베타상 탄화규소 입자가 긴 막대상 입자 형태를 갖는 4H 상의 알파 탄화규소로 상변태하면서 형성되었다. 긴 막대상의 탄화규소 입자의 부피분율 및 장단축비는 베타상 탄화규소 분말의 함유량이 50%인 시편에서 가장 크게 나타났으며, 이로 인하여 이 시편은 제조된 시편 중에서 가장 높은 인성을 나타내었다.
  13. 정일형;안진호;오근호 1364
    PDF
    Langasite( La3Ga5SiO14) is suitable for new piezoelectric properties. Langasite can be applied for communication de-vices due to intermediate piezoelectric properties which are similar to those of quartz and LiTaO3 in its acoustic cha-racteristics. In this study Langasite( La3Ga5SiO14) single crystals were successfully grown by using self-designed Czo-chralski system. From the results of optical properties it was found that crystals having a high quality and higher optical transmittance were grown at atmosphere of 1 to 30 vol% of oxygen content.
  14. 김주형;이전국;김용태;채희권 1369
    PDF
  15. 신동욱 1374
    PDF
    The cause of Scond Harmonic Generation (SHG) in thermally poled silica glass is suggested basedon the electrical and dielectric relaxation measurements. The absorption currents as functions of time were measured for various types of silica glasses and analyzed by the theory of Space Charge Polarization. Space charge polarization occurs when an ionic conducting material is subjected to dc electric field with blocking electrode. Thermal poling performed to induce SHG in silica glass is basically identical to the process generating space charge polarization. Hence it was found that gene-ration removal reproduction and temperature dependence of SHG in poled silica is directly related to those of space charge polarization. It turned out that the fundamental parameters governing the SHG in poled silica are charge carrier concentration and mobility. Based on the theory of space charge polarization and experimental results of electrical rela-xation the method to increase the intensity of SHG is proposed.
  16. 이득용;김대준;이명현;황해진 1381
    PDF
  17. 손영국;박홍채 1390
    PDF
    Zr(Y,Ce)O2 TZP ceramics were prepared by sintering compacts of 3 mol% Y2O3-TZP(3Y-TZP) powders with different amount of 12 mol% CeO2-TZP(12Ce-TZP) in air at 140$0^{\circ}C$ for 2 h. The phase changes microstructure and mechanical properties of Zr(Y. Ce)O2 TZP after hydrothermal aging(20$0^{\circ}C$ 5h) were investigated. Although an addition of 12Ce-TZP accelerated the grain growth of Zr(Y, Ce)O2 TZP it restrained the transformation of tetragonal to the monoclinic phase during aging. The degradation in mechanical properties of sintered bodies was governed by the formed monoclinic phase and chemical composition. Induced Vickers indentation crack was propagated intergranually. From SEM observation of the fracture surfaces the pull-out of individual grain was confirmed.