• Reproductive and Developmental Biology
• /
• v.28 no.4
• /
• pp.227-233
• /
• 2004

This study was conducted to investigate the effect of various addition and exclusion time of glucose (Control: no addition, A: 24～72 h, B: 24～48 h, C: 48～72 h, D: 0～72 h, E: 0～48 h, F: 0～24 h and 48～72 h, G: 0～24 h) on embryonic developmental capacity of 2-cell embryos in mice. Developed blastocysts were assessed for mean cell number by differential staining. The zona-intact blastocyst (ZiB) rates were higher (p<0.05) in group B than control. However, the zona-escape blastocyst (ZeB) rates were not significantly different in all groups. At 72 h, total blastocyst (ZiB + ZeB) formation rates were not significantly different in all groups. The mean cell number was not significantly different among all groups. The inner cell mass (ICM) cell number was higher (p<0.05) in group F than control, group A, B and G. The trophectoderm (TE) cell number was higher (p<0.05) in control than group A and D. The %ICM was higher (p<0.05) in group C, D and F than control. The ICM : TE ratio was not significantly different in all groups. Between control and glucose group, no significant difference was observed in the total blastocysts (ZiB + ZeB) formation rates. Also, no significant difference was observed in the mean cell number, ICM cell number and ICM : TE ratio. However the TE cell number was higher (p<0.05) in control than glucose group and %ICM was higher (p<0.05) in glucose group than control. In conclusion, glucose added in culture medium was not inhibitory on blastocyst formation but glucose added for 48 ～72 h in culture medium increases %ICM of blastocysts in mice.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.4
• /
• pp.419-425
• /
• 2009

This study examined the effects of added amounts of shrimp powder on the physical and sensory properties of Jook for elderly foodservice operation. According to the amylograph data, the composite shrimp flour-wheat flour samples increased the gelatinization temperature, with increasing shrimp-flour content; moreover, initial viscosity at $95^{\circ}C$, viscosity at $95^{\circ}C$ after 15 minutes, and maximum viscosity were reduced. As the level of shrimp powder in samples increased, L-values decreased, and a-values and b-values increased. In addition, the Jook had higher viscosity and lower spreadability values as the amount of shrimp powder increased. Sensory characteristics, such as nutty taste, color, viscosity, and overall preference increased significantly with the addition of shrimp powder. In conclusion, to enhance the quality of Jook, a 3% addition of shrimp powder would be the most beneficial.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.287-293
• /
• 1998

The effects of B2O3 addition on the sintering behavior and th microwave dielectric properties of $(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics were investigated. By addition of $B_2O_3$, increases the density of the ceramics increases and grain growth enhances, It was densified to over 94% of $(Mg_{0.93}Ca_{0.07})TiO_3$ theoretical density by the addition of 0.15-1.0wt% B2O3 and stable microwave dielectric properties observed by the addition of 0.2-0.4wt% $B_2O_3.\;(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics sintered at $1200^{\circ}C$ exhibits maximum dielectric constants of 24-25 quality factor($Q{\times}f$) of more than 70000 and temperature coefficient of resonant frequency of $0\;ppm/^{\circ}C$ by adding of 0.15-0.4wt% $B_2O_3$.

• Transactions of Materials Processing
• /
• v.24 no.1
• /
• pp.44-51
• /
• 2015

The current study seeks to examine the effects of V and C additions on the mechanical and low thermal expansion properties of a high strength invar base alloy. The base alloy (Fe-36%Ni-0.9%Co-2.75%Mo-0.7Cr-0.23Mn-0.17Si-0.3%C, wt.%) contains $Mo_2C$ carbides, which form as the main precipitate. In contrast, alloys with additions of 0.4%V+0.3%C (alloy A) or 0.4%V+0.45%C (alloy B) contain $Mo_2C$+[V, Mo]C carbides. The average thermal expansion coefficients of these high strength invar based alloys were measured in the range of $5.16{\sim}5.43{\mu}m/m{\cdot}^{\circ}C$ for temperatures of $15{\sim}230^{\circ}C$. Moreover, alloy B showed lower thermal expansion coefficient than the other alloys in this temperature range. For the mechanical properties, the [V, Mo]C improved hardness and strengths(Y.S. and T.S.) of the high strength invar base alloy. T.S.(tensile strength) and Y.S.(yield strength) of hot forged alloy B specimen were measured at 844.6MPa and 518.0MPa, respectively. The tensile fractography of alloy B exhibited a ductile transgranular fracture mode and voids were initiated between the [V, Mo]C particles and the matrix. Superior properties of high strength and low thermal expansion coefficient can be obtained by [V, Mo]C precipitation in alloy B with the addition of 0.4%V and 0.45%C.

• Korean journal of food and cookery science
• /
• v.24 no.4
• /
• pp.439-444
• /
• 2008

This study examined the quality characteristics of soybean curd prepared with the addition of yellow paprika juice. The yield rate, pH, and ${\Delta}E$, L, a, and b values of the yellow paprika juice were 80.56$\pm$0.07%, 5.41$\pm$0.06, 25.34$\pm$0.14, 24.83$\pm$0.13, -0.61$\pm$0.24, and 26.28$\pm$0.27, respectively, and its moisture, crude ash, carbohydrate, crude protein, crude lipid, vitamin A, and vitamin C contents were 93.08 g, 0.40 g, 4.95 g, 0.85 g, 0.02 g, 25.26 IU, and 115.08 mg, respectively. The yield rate of the soybean curd did not differ significantly according to the level of added yellow paprika juice, however, there was a significant decrease in pH and a significant increase in acidity. The ${\Delta}E$ and b values of the soybean curd increased as the amount of yellow paprika juice in the formulation increased, whereas the L and a values decreased. Furthermore, hardness significantly increased as the level of yellow paprika juice increased. In terms of overall acceptability, the preferred soybean curd samples were the control and that containing 10% yellow paprika juice.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.52-56
• /
• 2022

Single-grain (c-normal or c-parallel) and multi-grain YBCO superconductors were prepared by a melt growth process with/without seeding. The magnetic levitation force and trapped magnetic field at liquid N₂ temperature (77 K) of the YBCO superconductors were investigated. Samples for the levitation force measurement were zero-field cooled (ZFC) to 77 K, and samples for trapped field measurement were field-cooled (FC) using Nd magnets. As for the magnetic levitation force, the c-normal, single grain sample showed the largest value, whereas the multi-grain sample showed the lowest value. The trapped magnetic field of the c-normal and c-parallel single-grain samples was 4-5 times that of the multi-grain sample. In addition, as the external magnetic field (the number of magnets) increased, the both properties increased proportionally. These results were explained in terms of the orientation dependence of the levitation forces and the magnetic field trapping capability of the YBCO superconductor.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.55-60
• /
• 2019

Polymer:nonfullerene solar cells with an inverted-type device structure were fabricated by employing the bulk heterojunction (BHJ) active layers, which are composed of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(6-methyl-2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). The BHJ layers were formed on a pre-patterned indium-tin oxide (ITO)-coated glass substrate by spin-coating using the blend solutions of PBDB-T and IT-M. The solar cell performances were investigated with respect to the cell position on the ITO-glass substrates. In addition, the short-term shelf lifetime of solar cells was tested by storing the PBDB-T:IT-M solar cells in a glovebox filled with inert gas. The results showed that the performance of solar cells was relatively higher for the cells close to the center of substrates, which was maintained even after storage for 24 h. In particular, the PCE of PBDB-T:IT-M solar cells was marginally decreased after storage for 24 h owing to the slightly reduced fill factor, even though the open circuit voltage was unchanged after 24 h.

• Korean Journal of Plant Resources
• /
• v.12 no.4
• /
• pp.260-268
• /
• 1999

Crude extract of Coptis japonica root-stem was evaluated for antifungal activity against Phytophthora capsici, Fusarium oxysporum, Colletotrichum dematium, Colletotrichum truncatum, Botrytis cinerea, Botryosphaeria dothidea and Alternaria porri, and antifungal active compound from the extract was identified. In addition, the usefulness of the extract for some plants disease control was investigated. Crude extract of C. japonica root-stem exhibited antifungal activity against P. capsici, F. oxysporum, C. dematium, B. cinerea, B. dothidea and A. porri. Antifungal activity of the substance isolated from C. japonica root-stem was similar to a standard chemical berberine-Cl. Red-pepper fruit rot, sesame stem rot and welsh-onion alternaria leaf spot were effectively controlled by the crude extract of C. japonica root-stem. Phytotoxicity was not observed in the red-pepper and welsh-onion leaves and red-pepper and strawberry fruits with exogenous foliage application of the crude extract. Seeds germination and radicle growth of red-pepper and sesame were inhibited by the crude extract of C. japonica root-stem. 4.24g of yellowish compound per 100g of C. japonica root-stem was obtained. The compound was identified as berberine-Cl by HPLC.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.4
• /
• pp.558-565
• /
• 2012

The objective of this study was to develop a predictive growth model for Bacillus cereus in nutrient broth and validate the developed growth model in blanched vegetables. After inoculating B. cereus into nutrient broth, growth of B. cereus was investigated at 13, 17, 24, 30 and $35^{\circ}C$. Lag time (LT) decreased while specific growth rate (SGR) increased with an increase in storage temperature. Growth of B. cereus was not observed at temperatures lower than $12^{\circ}C$. Secondary growth models were developed to describe primary model parameters, including LT and SGR. Model performance was evaluated based on bias factor ($B_f$) and accuracy factor ($A_f$). In addition, we inoculated B. cereus into blanched vegetables stored at 13, 24, $35^{\circ}C$ and observed the growth kinetics of B. cereus in five different blanched vegetables. Growth of B. cereus was most delayed on Doraji at $13^{\circ}C$ and was not observed on Gosari at $13^{\circ}C$. Growth of B. cereus at $35^{\circ}C$ was significantly (p<0.05) slower on Gosari than on other blanched vegetables. The developed secondary LT model for broth in this study was suitable to predict growth of B. cereus on Doraji and Gosari, whereas the SGR model was only suitable for predicting the growth of B. cereus on mung bean sprout.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.827-836
• /
• 2014

In this study, the effects of Mulberry leaves extract (ME) addition on the quality of Kimchi was investigated during 30 days of fermentation at $5^{\circ}C$. ME was added to salted cabbage at concentrations of 0% (C), 0.4% (ME1), 0.8% (ME2) and 1.2% (ME3) (w/w). The pH of Kimchi added above 0.8% ME was higher than that of Kimchi without ME after 12 days of fermentation. During overall fermentation, the titratable acidity of Kimchi with 1.2% ME remained at the lowest level. The degree of salinity decreased with increasing amount of added ME, whereas control groups showed the highest salinity. In L, a and b values of samples, the highest Figures of L and b were observed in control groups, and ME3 showed the highest value of a. In addition, the cutting force during the fermentation period was higher in all treated groups compared with control groups, and ME3 showed the highest hardness value. Moreover, growth of lactic acid bacteria and total bacteria were inhibited by addition of ME. In the sensory assessment, 0.4% ME improved the quality of Kimchi, showing the highest taste score and overall preference. Therefore, addition of 0.4% ME appears to be an acceptable approach to enhance the quality of Kimchi without reduction of acceptability.