• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1485-1487
• /
• 2002

The 0.96Mg$TiO_3$-0.04Sr$TiO_3$ ceramics with $V_2O_5$(5wt%) were prepared by the conventional mixed oxide method. The structural properties were investigated with sintering temperature by XRD and SEM. According to the X-ray diffraction patterns of the 0.96Mg$TiO_3$-0.04Sr$TiO_3$ceramics with $V_2O_5$(5wt%), the ilmenite $MgTiO_3$ and perovskite $SrTiO_3$ structures were coexisted and secondary phase $MgTi_2O_5$ were appeared. Increasing the sintering temperature, the grain size was increased and three types of grains were exhibited: larger circular grain, small square grain and lapth-shaped grain. In the case of 0.96Mg$TiO_3$-0.04Sr$TiO_3$ ceramics with $V_2O_5$(10wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency were $15.24{\sim}18.55$, $22,890{\sim}42,100$GHz, -24.5${\sim}$+2.414ppm/$^{\circ}C$, respectively.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.227-232
• /
• 2000

$MgTiO_3$thin films have been grown on various substrates by pulsed laser deposition (PLD) to investigate the application for microwave dielectrics and optical devices. Epitaxial $MgTiO_3$thin films were obtained on sapphire (c-plane$A1_2O_3$$MgTiO_3$thin films deposited on $SiO_2/Si$ and platinized silicon ($Pt/Ti/SiO_2/Si$) substrates were highly oriented. $MgTiO_3$thin films grown on sapphire were transparent in the visible and had a sharp absorption edge about 290 nm. These $MgTiO_3$thin films had extremely fine feature of surface morphology, i.e., rms roughness of 0.87 nm, which was examined by AFM. We have investigated the dielectric properties of the $MgTiO_3$thin films in $MIM(Pt/MgTiO_3/Pt)$ capacitors. Dielectric constant and loss of $MgTiO_3$thin films deposited by PLD were about 24 and 1.5% at 1 MHz, respectively. These $MgTiO_3$thin films also exhibited little dielectric dispersion.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.756-760
• /
• 2007

The $(1-x)Mg_4Ta_2O_9-xwt%TiO_2\;(x=5\sim20)$ microwave dielectric ceramics were prepared by solid-state reaction method and sintered at $1450^{\circ}C$. According to the X-ray diffraction data, the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics had main phase of $Mg_4Ta_2O_9$ and $MgTi_2O_5$ peaks were added by increasing of $TiO_2$ addition. Microwave dielectric properties of the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics were influenced by $MgTi_2O_5$ phase and properties of $TiO_2$. There was a little decrement of the quality factor from 116,800GHz of pure $Mg_4Ta_2O_9$ to 100,100GHz of 15wt% $TiO_2$ added one. But there was excellent improvement in temperature coefficient of the resonant frequency (TCRF) by addition of 15wt% $TiO_2$. The dielectric constant quality factor and TCRF of the $Mg_4Ta_2O_9-xwt%TiO_2$ ceramics sintered at $1450^{\circ}C$ were $13.08\sim16.41,\;45,000\sim165,410GHz,\;-24.82\sim+3.88ppm/^{\circ}C$, respectively, depending on the value of x. Simulated dielectric resonator (DR) with $Mg_4Ta_2O_9-15wt%TiO_2$ ceramics had the operating frequency of 11.97GHz and $S_{2,1}$ of -35.034dB.

• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.17-24
• /
• 1985

In the composition of $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ the effect of particle size on PbO vaporization were measured, . The initial step of discontinuous vaporization of unreated PbO during the calcining process was depended on the particle size. All additives $La_2O_3Nb_2O_5$ and $Al_2O_3$ inhibited the grain growth of the composition $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ +2wt% excess PbO. The dielectric and piezoelectric properties of the composition $Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$ were improved by the addition of 2wt% excess PbO and proper additive. The electromechanical planar coupling factor of 0.65 and mechnical quality factor of 390 could be obtained by adding 5wt% $Nb_2O_5$ to the composition 2wt% excess PbO+$Pb(Mg_{0.15} W_{0.15})Ti_{0.35}-Zr_{0.35}O_3$.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.969-973
• /
• 1998

Pb(Zr, Ti)O3 (PZT) (Zr:Ti= 52: 48) thin films were prepared on MgO(100) substrates by dipping-py-rolysis process using metal naphthenates as starting materials. Thin films were fabricated by spin coating technique and the precursor films were prefired at 20$0^{\circ}C$ in air for 0.5, 1, 2, 3, and 24 h followed by final heat treatment at 75$0^{\circ}C$ for 30min. Film prefired for 24 h lost orientational properties and pole figure analysis showed the lost of the epitaxial relationship between the films and substrate while highly a/c-axis oriented thin films were obtained for the samples prefired for 1, 2, and 3h.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.199-203
• /
• 1998

$Pb(Zr, Ti)O_3$ (Pb:Zr:Ti=1:0.52:0.48) thin films were prepared on single crystal MgO(100) substrates by dipping-pyrolysis process using a solution of constituent metal naphthenates as starting materials. The solution was spin-coated onto substrate and the precursor films were pyrolyzed at $200^{\circ}C$ in air or at $200^{\circ}C$ in argon for 1, 2, 5 and 24h, followed by final heat treatment at $750^{\circ}C$. For all the films, highly (h00)/(00l)-oriented Pb$Pb(Zr, Ti)O_3$ thin films with smooth surfaces and crack-free were obtained, whereas thin film pyrolyzed in air for 24 h exhibited polycrystalline character. According to the pole-figure analysis, epitaxy of the product films was found to depend on pyrolysis atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.20 no.1
• /
• pp.19-24
• /
• 1983

Dielectrics used as capacitor was studied in the system of $Pb(MgW)_{0.5} O_3-PbTiO_3-PbZrO_3$ Curie tempera-tures of $PbTiO_3 PbZrO_3$ and $Pb[MgW]_{0.5} O_3$ were 49$0^{\circ}C$ 23$0^{\circ}C$ and 39$0^{\circ}C$ respectively. When these materials formed solid solution the more amount of $Pb(MgW)_{0.5}O_3$ was increased the more Curie temperature lowered and dielectric constant increased. Higher dielectric constants were measured in the solid solution of which X-Ray diffraction patterns were changed. Especially Curie temperature and dielectric constant were 85$^{\circ}C$ and 4159 respectively in the composition of 60 $Pb(MgW)_{0.5}O_3-30 PbTiO_3-10PbZrO_3$. Also in this composition ferroeletric material with thermal stability was obtained.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.24-30
• /
• 1976

To observe the influence of tetrahedral and octahedral preference of cations of Ni2+, Ti4+ upon the formation and the color development of the MgO-SnO2 spinel containing Ni2+ and Ti4+ ions, the gradual substitution of Ni2+ ions for Mg2+ ions and of Ti4+ ions for Sn4+ ions of the spinel in NiO-MgO-SnO2-TiO2 system was carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stability as a glaze pigment were also carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were also carried out. The results are summarized as follows. 1) As increasing the amounts of Ni2+ ions in the xNiO.(2-x)MgO.SnO2 system, spinel was not formed easily, and the mixed-spinel was formed in NiO.MgO.SnO2 of x=1 but the spinels was not formed completely in the range of x>1.5 2) The spinels was not more formed in NiO-MgO-TiO2 system than NiO-MgO-SnO2 system. Therefore, Ti4+ ions have strong octahedral preference than Sn4+ ions. The color changed the yellow region little. The mixed-spinel or non-spinel was formed easily NiO.TiO2, MgO.TiO2 of illmenite type as the gradual substitution of Ti4+ ions for Sn4+ ions. 3) The results of glaze test. The color changed from white through graish brown to brown as the gradual substitution of Ni2+ ions for Mg2+ ions in calcium-zinc glaze and calcium glaze, and from white through light yellowish beige to dull beige in tile glaze. Also, the color did not change generally as the gradual substitution of Ti4+ ions for Sn4+ ions in NiO-MgO-SnO2-TiO2 system.

• Journal of Environmental Science International
• /
• v.31 no.8
• /
• pp.677-689
• /
• 2022

In order to photocatalytically treat organic matter (COD_Cr) and chromaticity effectively, chemical coagulation and sedimentation processes were employed as a pretreatment of the leachate produced from landfill in Jeju Island. This was performed using FeCl₃·6H₂O as a coagulant. For the treated leachate, UV/TiO₂ and UV/TiO₂/H₂O₂ systems were investigated, using 4 types of UV lamps, including an ozone lamp (24 W), TiO₂ as a photocatalyst, and/or H₂O₂ as an initiator or inhibitor for photocatalytic degradation. In the chemical coagulation and sedimentation process using FeCl₃·6H₂O, optimum removal was achieved with an initial pH of 6, and a coagulant dosage of 2.0 g/L, culminating in the removal of 40% COD_Cr and 81% chromaticity. For the UV/TiO₂ system utilizing an ozone lamp and 3 g/L of TiO₂, the optimum condition was obtained at pH 5. However, the treated COD_Cr and chromaticity did not meet the emission standards (COD_Cr: 400 mg/L, chromaticity: 200 degrees) in a clean area. However, for a UV/TiO₂/H₂O₂ system using 1.54 g/L of H₂O₂ in addition to the above optimum UV/TiO₂ system, the results were 395 mg/L and 160 degrees, respectively, which were within the emission standard limits. The effect of the UV lamp on the removal of COD_Cr, and chromaticity of the leachate decreased in the order of ozone (24 W) lamp > 254 nm (24 W) lamp > ozone (14 W) lamp > 254 nm (14 W) lamp. Only COD_Cr and chromaticity treated with the ozone (24 W) lamp met the emission standards.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.