• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.29-34
• /
• 1974

On a newly reclamed acidic Song-jong soil (soil of a member of fine loamy, mesic family of Hapludults) an experiment was carried out to find out the proper measure of the improvement of soil fertility with soybean as test crop. Results are summarized as follow: 1. Application of compost (1 ton/10a), lime (lime requirement)and fused phosphate (equivalent to 5% of the phosphate fixation coefficient)resulted in the increase of soybean yield by 93.3% over the check plot (N: 6kg/10a, $P_2O_5$: 9kg/10a, $K_2O$: 6kg/10a). The application of fused phosphate at the level of 5% of phosphate fixation coefficient N (6kg/10a) and K(6kg/10a) brought the yield increase by 62.7% over the check plot. However, although the pH of the soil was adjusted to 7.0 by liming, the application of lime with moderate dose of phosphate ($P_2O_5$: 9kg/10a) did not increase the yield of soybean significantly. And the application of fused phosphate at the level of 5% of phosphate fixation coefficient increased the available soil P from 14 ppm to around 100 ppm as tested after harvest. 2. Application of compost (1 ton/10a) increased the organic matter content of soil by 0.8% when tested after harvest. While, the application of rice straw (0.5 ton/10a) did not alter the soil organic matter content. The CEC of the soil tested after havest found incereased significantly by the addition of lime and compost. 3. Plant analysis revealed that the $K_2O/Ca+Mg$ is better correlated with the yield than the absolute concentration of $K_2O$ in plant tissue. Between the concentration of $P_2O_5$ in plant tissue and the yield of soybean, a typical C-curve relationship was observed, indicating that in this particular soil, phosphate was the primary growth liming factor.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.60-66
• /
• 1998

During the screening for anti-complementary activity from 10 kinds of edible mushrooms, an alkali extract of Agaricus bisporus showed the highest activity through the complement fixation test. The crude anti-complementary material(AB-0) from Agaricus bisporus was obtained by the alkali extraction using 1 N NaOH containing 5% urea$(65^{\circ}C)$, followed by methanol reflux, dialysis and lyophilization. The fraction AB-O showed potent anit-complementary and anti-tumor activity against sarcoma-180 injected mice. The fraction AB-0 was divided into 5 fractions(AB-20, AB-40, AB-60, AB-80, AB-A) by gradual acetone precipitation. Among them fraction AB-20 having the highest activity and yield was found to contain 39% carbohydrate and 46% protein. The anti-complementary protein-bound polysaccharide AB-20 consisted of glucose, arabinose, xylose, galactose and mannose in a molar ratio of 6.49 : 1.98 : 1.24 : 1.00 : 0.71, respectively and its main component amino acids were alanine(20.59%), isoleucine(16.85%), glutamine+glutamic acid(14.12%) and leucine (13.83%). The anti-complementary activity of AB-20 was decreased greatly by periodate oxidation, but decreased slightly by pronase digestion. This indicates that polysaccharide moiety is corelated with the anti-complementary activity and that protein is also involved in the activity.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.7
• /
• pp.883-890
• /
• 2001

Objectives : An in vitro biomechanical study of posterior lumbar interbody fusion(PLIF) with threaded cage using two different approaches was performed on eighteen functional spinal units of bovine lumbar spines. The purpose of this study was to compare the segmental stiffnesses among PLIF with one long posterolateral cage, PLIF with one long posterolateral cage and simultaneous facet joint fixation, and PLIF with two posterior cages. Methods : Eighteen bovine lumbar functional spinal units were divided into three groups. All specimens were tested intact and with cage insertion. Group 1(n=12) had a long threaded cage($15{\times}36mm$) inserted posterolaterally and oriented counter anterolaterally on the left side by posterior approach with left unilateral facetectomy. Group 2(n=6) had two regular length cages($15{\times}24mm$) inserted posteriorly with bilateral facetectomy. Six specimens from group 1 were then retested after unilateral facet joint screw fixation in neutral(group 3). Likewise, the other six specimens from group 1 were retested after fixation with a facet joint screw in an extended position(group 4). Nondestructive tests were performed in pure compression, flexion, extension, lateral bending, and torsion. Results : PLIF with a single cage, group 1, had a significantly higher stiffnesses than PLIF with two cages, group 2, in left and right torsion(p<0.05). Group 1 showed higher stiffness values than group 2 in pure compression, flexion, left and right bending but were not significantly different. Group 3 showed a significant increase in stiffness in comparison to group 1 for pure compression, extension, left bending and right torsion(p<0.05). For group 4, the stiffness significantly increased in comparison to group 1 for extension, flexion and right torsion(p<0.05). Although there was no significant difference between groups 3 and 4, group 4 had increased stiffness in extension, flexion, right bending and torsion. Conclusion : Posterior lumbar interbody fusion with a single long threaded cage inserted posterolaterally with unilateral facetectomy enables sufficient decompression while maintaining a majority of the posterior elements. In combination with a facet joint screw fixation, adequate postoperative stability can be achieved. We suggest that posterolateral insertion of a long threaded cage is biomechanically an ideal alternative to PLIF.

• Ocean Science Journal
• /
• v.40 no.3
• /
• pp.167-176
• /
• 2005

A time-series sediment trap was deployed at 1,034 m water depth in the eastern Bransfield Strait for a complete year from December 25, 1998 to December 24, 1999. About 99% of total mass flux was trapped during an austral summer, showing distinct seasonal variation. Biogenic particles (biogenic opal, particulate organic carbon, and calcium carbonate) account for about two thirds of annual total mass flux $(49.2\;g\;m^{-2})$, among which biogenic opal flux is the most dominant (42% of the total flux). A positive relationship (except January) between biogenic opal and total organic carbon fluxes suggests that these two variables were coupled, due to the surface-water production (mainly diatoms). The relatively low $\delta^{13}C$ values of settling particles result from effects on C-fixation processes at low temperature and the high $CO_2$ availability to phytoplankton. The correspondingly low $\delta^{l5}N$ values are due to intense and steady input of nitrates into surface waters, reflecting an unlikely nitrate isotope fractionation by degree of surface-water production. The $\delta^{l5}N$ and $\delta^{l3}C$ values of sinking particles increased from the beginning to the end of a presumed phytoplankton bloom, except for anomalous $\delta^{l5}N$ values. Krill and the zooplankton fecal pellets, the most important carriers of sinking particles, may have contributed gradually to the increasing $\delta^{l3}C$ values towards the unproductive period through the biomodification of the $\delta^{l3}C$ values in the food web, respiring preferentially and selectively $^{12}C$ atoms. Correspondingly, the increasing $\delta^{l5}N$ values in the intermediate-water trap are likely associated with a switch in source from diatom aggregates to some remains of zooplankton, because organic matter dominated by diatom may be more liable and prone to remineralization, leading to greater isotopic alteration. In particular, the tendency for abnormally high $\delta^{l5}N$ values in February seems to be enigmatic. A specific species dominancy during the production may be suggested as a possible and speculative reason.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.133-144
• /
• 2023

Densification is an effective method for improving the physical and mechanical properties of low-density wood. However, the set-recovery of dimensions was found to be the problem of densified wood due to low fixation during the densification process. Alkali pretreatment before densification is thought to be a modification process to improve the dimensional stability of densified wood. In this research, the wood samples used were boiled in a 1.25 N sodium hydroxide (NaOH) solution at different times, followed by densification for 5 h at 100℃. The alkali pretreatment for 1, 3, and 5 h of boiling increased the dimensional stability of densified woods and anti-swelling efficiency values were 8.52%, 63.24%, and 48.94%, respectively. The boiling of wood in NaOH solution decreased the holocellulose content, as well as lignin to a lesser degree, and a lower crystallinity index was observed. The lower hydroxyl groups and a higher proportion of lignin in treated samples seem to have contributed to the high dimensional stability detected.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.161-165
• /
• 2011

Purpose: Zygomaticomaxillary complex (ZMC) fracture is one of the most common facial injuries after facial trauma. As ZMC composes major facial buttress, it is a key element of the facial contour. So, when we treat these fractures, the operator should have a concern with the symmetry to restore normal appearance and function. But sometimes, unfavorable results may occur. The aim of this study is to analyze the unsatisfied midfacial contour after ZMC fractures reduction retrospectively and to point out the notandum. Methods: 369 patients, treated for fractures of the ZMC were included in the study. After the operation, such as open reduction and internal fixation (ORIF with titanium or absorbable materials), open reduction, and closed reduction, midfacial contour was evaluated with plain films and 3-dimensional computed tomography. And unfavorable asymmetric midfacial contours were correcterd by secondary correction and re-evaluated. Gross photographs were obtained at outpatient clinic. Results: Total of 38 patients had got a facial asymmetry and among of them 24 patients were treated secondary revisional ORIF operations for correction of unfavorable result of after primary reduction. Two of them had received tertiary operations, three patients had got osteotomy more than after one year and six patients had got minor procedures. The etiology of asymmetry were lateral displaced simple fracture of arch (n=2), lateral displaced comminuted fracture of arch (n=6), comminuted arch fracture combined posterior root fracture (n=9), and communited arch and body fracture (n=12), severely contused soft tissue (n=9). After the manipulations outcomes were acceptable. Conclusion: To prevent the asymmetry in ZMC fracture reduction, complete analysis of fracture, choice of appropriate operation technique, consider soft tissue, and secure of zygoma position are important. Especially, we should be more careful about communited fracture of zygomatic body and lateral displacement, root fracture of zygomatic arch. Because they are commom causes that make facial asymmetry. To get optimal result, ensure the definite bony reduction.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.336-345
• /
• 2020

Objective: To investigate the treatment modalities (Tx-Mods) for patients with unilateral hemifacial microsomia (UHFM) according to Pruzansky-Kaban types and growth stages. Methods: The samples consisted of 82 Korean UHFM patients. Tx-Mods were defined as follows: Tx-Mod-1, growth observation due to mild facial asymmetry; Tx-Mod-2, unilateral functional appliance; Tx-Mod-3, fixed orthodontic treatment; Tx-Mod-4, growth observation due to a definite need for surgical intervention; Tx-Mod-5, unilateral mandibular or bimaxillary distraction osteogenesis (DO); Tx-Mod-6, maxillary fixation using LeFort I osteotomy and mandibular DO/sagittal split ramus osteotomy; Tx-Mod-7, orthognathic surgery; and Tx-Mod-8, costochondral grafting. The type and frequency of Tx-Mod, the number of patients who underwent surgical procedures, and the number of surgeries that each patient underwent, were investigated. Results: The degree of invasiveness and complexity of Tx-Mod increased, with an increase in treatment stage and Pruzansky-Kaban type (initial < final; [I, IIa] < [IIb, III], all p < 0.001). The percentage of patients who underwent surgical procedures increased up to 4.2 times, with an increase in the Pruzansky-Kaban type (I, 24.1%; IIa, 47.1%; IIb, 84.4%; III, 100%; p < 0.001). However, the mean number of surgical procedures that each patient underwent showed a tendency of increase according to the Pruzansky-Kaban types (I, n = 1.1; IIa, n = 1.5; IIb, n = 1.6; III, n = 2.3; p > 0.05). Conclusions: These findings might be used as basic guidelines for successful treatment planning and prognosis prediction in UHFM patients.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.4
• /
• pp.239-256
• /
• 1997

Plants belonging to the category of 2n apomixis or agamospermy form embryos and seeds without the processes of normal meiosis and syngamy. Seeds produced in this way have identical genotype of their maternal parent. Three different types of agamospermy are recognized: diplospory, apospory, and adventitious (adventive) embryony. $F_1$ hybrid cultivars cannot be used as seed sources in the next ($F_2$) generation because this generation would be extremely variable as a result of genetic segregation. Hybrid vigor is also reduced in the $F_2$ generation. Therefore, parental stocks for hybrid seed production need to be maintained and cross must be continuously repeated. Agamospermic 2n apomixis would make it possible to fix the genotype of a superior variety so that clonal seeds faithfully representing that genotype could be continuously and cheaply produced independent of pollination. That is, $F_1$ hybrid seeds could be produced for many generations without loss of vigor or genotype alteration. Production of apomictic $F_1$ hybrid seed would be simplified because line isolation would not be necessary to produce seed or to maintain parental lines, and the use of male-sterile lines could be avoided. Overall, apomixis would enable a significant reduction in hybrid seed production costs. Additionally, the production of clonal seed is not only important for seed propagated crops, but also for the propagation of heterozygous fruit trees and timbers. Clonal seed would help avoid costly and time-consuming vegetative propagating methods that are currently used to ensure the large-scale production of these plants. Apomixis is scattered throughout the plant kingdom, but few important agricultural crops possess this trait Therefore, most research to date has centered on introgressing the trait of apomixis into agricultural crops such as wheat, maize, and some forage grasses from wild distant relatives by traditional cross breeding. The classical breeding approach, however is slow and often impeded by many breeding barriers. These problems could be surmounted by taking mutagenesis or molecular approach. Arabidopsis thaliana is a tiny sexually reproducing plant and is convenient in constructing and screening in molecular researches. Male-sterile mutants of Arabidopsis are particularly suitable genetic background for mutagenesis and screening for apomictic mutants. Molecular approaches towards isolating the genes controlling the apomictic process are feasible. Direct isolation of genes conferring apomixis development would greatly facilitate the transfer of this trait to wide variety of crops. Such studies are now in progress.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.168-175
• /
• 2003

Fracture about proximal humerus may be classified as the articular segment or the anatomical neck, the greater tuberosity, the lesser tuberosity, and the shaft or surgical neck. Now, usually used, Neer's classification is based on the number of segments displaced, over 1cm of displaced or more than 45 degrees of angulation , rather than the number of fracture line . Absolute indication of a operative treatment a open fracture, the fracture with vascular injury or nerve injury , and unreductable fracture-dislocation . Inversely, the case that are severe osteoporosis, and eldly patient who can't be operated by strong internal fixation is better than arthroplasty used by primary prosthetic replacement and early rehabilitation program than open reduction and internal fixation. The operator make a decision for the patient who should be taken the open reduction and internal fixation, because it's different that anatomical morphology, bone density, condition of patient. The operator decide operation procedure. For example, percutaneous pinning, open reduction, plate & screws, wire tension bands combined with some intramedullary device are operation procedure that operator can decide . The poor health condition for other health problem, fracture with unstable vital sign and severe osteoporosis , are the relative contraindication. The stable fracture without dislocation is not the operative indication . The radiologic film of the prokimal humerus before the operation can not predict for fracture evaluation. It's necessary to good radiologic film for evaluation of fracture form. The trauma serise is better than the other radiologic film for evaluation. The accessary radiologic exam is able to help for evaluation of bone fragment and anatomy. The CT can be helpful in evaluating these injury, especially if the extract fracture type cannot be determined from plain roenterogram of the proximal humerus, bone of humerus head. If the dislocation is severe anatomically , we could consider to do three dimentional remodelling. The MRI doing for observing of bony morphology before the operation is not better than CT If we were suspicious of vascular injury, we could consider the angiography.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1286-1298
• /
• 2005

The genus Paenibacillus is a new group of bacilli separated from the genus Bacillus, and most of species have been isolated from soil. In the present study, we collected 450 spore-forming bacilli from the roots of winter crops, such as barley, wheat, onion, green onion, and Chinese cabbage, which were cultivated in the southern part of Korea. Among these 450 isolates, 104 Paenibacillus-like isolates were selected, based on their colony shape, odor, color, and endospore morphology, and 41 isolates were then finally identified as Paenibacillus spp. by 16S rDNA sequencing. Among the 41 Paenibacillus isolates, 23 were classified as P. polymyxa, a type species of the genus Paenibacillus, based on comparison of the 16S rDNA sequences with those of 32 type strains of the genus Paenibacillus from the GenBank database. Thirty-five isolates among the 41 Paenibacillus isolates exhibited antagonistic activity towards plant fungal and bacterial pathogens, whereas 24 isolates had a significant growth-enhancing effect on cucumber seedlings, when applied to the seeds. An assessment of the root-colonization capacity under gnotobiotic conditions revealed that all 41 isolates were able to colonize cucumber roots without any significant difference. Twenty-one of the Paenibacillus isolates were shown to contain the nifH gene, which is an indicator of $N_{2}$ fixation. However, the other 20 isolates, including the reference strain E681, did not incorporate the nifH gene. To investigate the diversity of the isolates, a BOX-PCR was performed, and the resulting electrophoresis patterns allowed the 41 Paenibacillus isolates to be divided into three groups (Groups A, B, and C). One group included Paenibacillus strains isolated mainly from barley or wheat, whereas the other two groups contained strains isolated from diverse plant samples. Accordingly, the present results showed that the Paenibacillus isolates collected from the rhizosphere of winter crops were diverse in their biological and genetic characteristics, and they are good candidates for further application studies.