• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.12-15
• /
• 2022

The effect of SiO₂, Na₂O and CaO on isokom temperatures in soda-lime glass is estimated by comparing calculated isokom temperatures using viscosity model proposed by Lakatos. The isokom temperatures at the viscosity of log η = 12.3, 10, 6.6 and 1 (Pa·s) are lowered by 6, 7, 10 and 24℃, respectively, by the substitution of SiO₂ with Na₂O by 1 mol%. Meanwhile, replacing 1 mol% of SiO₂ with CaO raises the isokom temperatures by 3~4 and 2℃ at the viscosity of log η = 12.3 and 10 (Pa·s), respectively, but lowers the temperatures by 1 and 21℃ at the viscosity of log η = 6.6 and 1(Pa·s), respectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1105-1113
• /
• 2000

Bioglass 조성 중 45S5 (46.1SiO$_2$.24.4$Na_2$O.26.9CaO.2.6P$_2$O$_{5}$ : 몰비)를 기본 조성으로 하여 46P4 (46.2SiO$_2$.49.5CaO.4.3P$_2$O$_{5}$ : 몰비), 46SF (46.1SiO$_2$24.4$Na_2$O.16.1CaO.2.6P$_2$O$_{5}$.10.8CaF : 몰비) 그리고 55SF (55.1SiO$_2$.9.2$Na_2$O.27.8CaO.3.4P$_2$O$_{5}$.4.5CaF : 몰비)를 제조하여 tris-완충용액 및 유사 생체용액(simulated body fluid)에서 반응시킨 후 생체활성유리의 표면에 생성되는 아파타이트 결정형에 관하여 연구하였다. 45S5 유리를 tris-완충용액에 반응시켰을 경우 6시간 반응시부터 수산화 아파타이트가 생성되었으나 유사 생체용액에 반응시켰을 경우에는 24시간까지도 수산화 아파타이트 결정이 생성되지 못하고 비정질 상태의 칼슘 인산염만 형성되었다. tris-완충용액에 각 조성의 유리를 200시간 반응시킨 경우 불소를 함유하지 않은 유리에서는 잎사귀 모양의 수산화 아파타이트가, 불소를 함유한 유리에서는 구상의 플루오르 아파타이트가 형성되었다. 그러나 유사 생체용액에 각 조성의 유리를 200시간 반응시켰을 경우 불소를 함유하지 않은 유리에서는 누에고치형의 수산화 아파타이트가 형성되었고 불소를 함유한 유리에서는 무정형의 칼슘 인산염이 생성되었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.20-32
• /
• 1992

$Na_2O-CaO-MgO-Al_2O_3-SiO_2$ glass was taken as a basic glass and then $Li_2O$ O.5wt%, $K_2O$ 2.0wt% were substituted to $Na_2O$content, MgO 12.0wt %, ZnO 6.0wt % to CaO content. And also nucleation agent $ZrO_2 and $CaF_2$ were added to 1-2wt% respectively. The crystal according to the compositions appeared wollastonite, diopside and diopside.tremolite. The glasses substituted NazO by LizO was decreased thermal expansion coeffcient but substituted by ZnO was opposite direction and both of them increased bending strength. In the ratio of ZrOz to CaF, each 1: 1 and 1: 2 have shown considerable crystal growth at $1000^{circ}C~1050^{\circ}C$ and high bending strength, but the glass in the ratio 1: 2 have shown lowest thermal expansion coefficient. The activation energy was at the glass in the ratio of ZrO, to CaFz 1:2 evaluated 55.24kvsl/mol by Ozawa type and 53.05kal/mol by kissinger type.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.215-223
• /
• 2017

The purpose of this study is to reveal the characteristics, correlations, and colorant materials of those using the chemical compositions of 30 glasses excavated from the Sarari hall of the Mireuksaji stone pagoda, and to determine the correlations between them and other glass excavated from the Wanggungri site. The results of the chemical analysis of the 11 glass beads show that they are a soda glass group with high contents of $SiO_2$ and $Na_2O$; these can be further subdivided into soda-alumina groups ($Na_2O-Al_2O_3-CaO-Si_2O$). The characteristics of the stabilizer are classified as being of the high alumina glass group (LCHA), except for two glasses. It was concluded that colorant materials affected the coloring for glass beads by various components including Ti, Mn, Fe, Cu and Pb. In addition, we examined six lead glasses which are glass plate and unknown fragments that are of a common lead glass system ($PbO-SiO_2$) with respect to the average contents of PbO (70wt.%) and $SiO_2$ (30wt.%). As a result of comparing these relics with those of the glass beads excavated by Wanggungri, there is a similarity in that they belong to the soda glass group. However, the contents of $Na_2O$ are relatively higher than that of the glass beads in the Mireuksaji pagoda, and most of relics include glasses with a low content of $K_2O$ and CaO. In addition, the PbO and $SiO_2$ contents are slightly different in the lead glass. It seems that the glass relics made at two different sites may have used different raw materials or techniques.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.623-629
• /
• 1992

The possible use of bioglass as implant materials is due to its biocompatibility to human body. Even if many animal studies for the bioglasses have been performed, their compositional dependences of structures and physical properties are not fully understood. In the present work, physical property measurements such as density and thermal expansion coefficient were carried out for the bioglasses, with substitution of CaO for Na2O in bioglass composition (46.1%SiO2, 24.4%Na2O, 26.9%CaO, 2.6%P2O5:mol%). Hydroxyapatite formation on the glass surface was also examined after reacted in Tris-buffer solution. As CaO was substituted for Na2O, the bond strength between nonbridging oxygen and modifier became stronger to make glass structure rigid, and resulted in increase in density and decrease in thermal expansion coefficient. When the bioglasses were reacted in Tris-buffer solution, hydroxyapatite was formed on the bioglass surface for all prepared glasses in 2 hours, independently on CaO content, and the thickness of hydroxyapatite layer was decreased a little, while the thickness of SiO2 rich layer was decreased sharply with CaO content.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.213-219
• /
• 2006

To improve the strength of glass is being studied in order to contribute to weight saving of flat panel displays. Generally, the strength achieved of glass-ceramics is higher as is the fracture toughness by the formation of a heterogeneous phase inside glass. In this study, Ag-doped $45SiO_2-24CaO-24Na_2O-4P_2O_5\;and\;70SiO_2-10CaO-24Na_2O-10TiO_2$ glasses were irradiated to strengthen by crystallization using femto-second laser pulse. XRD, Nano-indenter and SEM etc., irradiation of laser pulse without heat-treated samples was analyzed. Samples irradiated by laser had higher value($4.4{\sim}4.56^*10-3Pa$) of elastic modulus which related with strength of glass than values heat-treated samples and these are $1.2{\sim}1.5$ times higher values than them of mother glass. This process can be applicable to the strengthening of thinner glass plate, and it has an advantage over traditional heat-treatment and ion-exchange method.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.979-990
• /
• 1990

The possible use of bioglass as implant materials is due to its biocompatibility to human body. Even if many animal studies for the bioglasses have been performed, their structures and physical properties are not fully understood. In the present work, several investigations such as Raman spectroscopic analysis, density, thermal expansion coefficient, softening temperature, and refractive index measurement were carried out to find the structures and physical properties of bioglasses, where MgO is substituted for CaO in bioglass composition (46.1%SiO2, 24.4%Na2O, 26.9%CaO, 2.6%P2O5 ; mole%). Hydroxyapatite formation on the glass surface reacted in Tris-buffer solution was also examined. When CaO was replaced by MgO, nonbridging oxygen in glass structuer was diminished but the degree of disorder increased. Thermal expansion and softening properties showed the mixed oxide effect. Hydroxyapatite were formed on the surface of 0~11mole% of MgO containing bioglasses, and the thickness of SiO2-rich layer as well as hydroxyapatite layer were unchanged with MgO content. However, the hydroxyapatite was not formed on the surface of the bioglasses containing over 11 mole percent MgO, even if the glasses were reacted for long period.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.200-207
• /
• 2011

Abstract: The effect of lead free glass frit compositions on the properties of thick film conductor and resistor pastes were investigated. Two types lead free frits, HBF-A(without $Bi_2O_3$) and HBF-B(with $Bi_2O_3$) were made from $SiO_2$, $B_2O_3$, $Al_2O_3$, CaO, MgO, $Na_2O$, $K_2O$, ZnO, MnO, $ZrO_2$, $Bi_2O_3$. And Ag based conductor pastes and $RuO_2$ based resistor paste were prepared by mixed with these frits and functional phase(Ag and $RuO_2$), and organic vehicle. The properties of thick film conductor and resistor sintered at $850^{\circ}C$ were studied after printing on $Al_2O_3$ substrate. The morphology of the sintered films surface were SEM and EDS were carried out to analysis the chemical composition on resistor surface and state of Ru atom in frit matrix.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.225-232
• /
• 2003

Three piston cores. obtained from the northwestern Ulleung Basin of the East Sea, are analyzed to study the tephrostratigraphy of the late Quaternary core sediments and to reveal the comparative characteristics of the tephra layers. The cores consist mainly of the muddy sediments that are partly interbedded with lapilli tephra and ash layers. The muds are further divided into hemipelagic and turbiditic mud facies. The hemipelagic facies is dominated by bioturbated mud and crudely laminated mud, whereas the turbiditic facies includes mainly thinly laminated mud and homogeneous mud, and often alternates with non-turbiditic muds. According to microscopic observation and EDX analysis, three tephra layers of the Ulleung-Oki (U-Oki; ca. 9.3 ka), Aira-Tanzawa (AT: ca. 22~24.7 ka) and Ulleung-Yamato (U-Ym; ca. 25~33 ka) are identified in the study cores. Among these, the U-Oki and U-Ym layers, originating from the Ulleung Island, consist mainly of massive-type glass shards with alkali feldspar. Both of the tephra layers contain a lower content of SiO$_2$ (57~66.5 wt.%) and a higher content of Na$_2$O+K$_2$O (11~16 wt.%) than the AT layer (SiO$_2$=75~78.5 wt.%, Na$_2$O+K$_2$O=6.5~9 wt.%) that consists of typical plane-type and/or bubble-wall glass grains. Compared with that of the U-Ym layer, a sedimentary facies of the U-Oki layer is very thick and contains three stratigraphic units, probably due to relatively large and different supplies of pyroclastic sediments. Thus, the eruption of Ulleung Volcano (ca. 7,300 B.C.) is thought to have had a more powerful effect on depositional environment than the U-Ym eruption.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.171-174
• /
• 2005

To improve the strength of glass is being studied in order to contribute to weight saving of flat panel displays. Generally, the strength achieved of glass-ceramics is higher as is the fracture toughness by the formation of a heterogeneous Phase inside glass. In this study, Ag-doped $45SiO_2-24CaO-24Na_2O-4P_2O_5$ glasses were irradiated to strengthen by crystallization using femto-second laser pulse. UV/VIS, Spectroscope, XRD, nano-indenter and SEM etc. irradiation of laser pulse without heat-treated samples was analyzed. Samples irradiated by laser had higher value$(4.4\~4.56{\ast}10-3Pa)$ of elastic modulus which related with strength of glass than values heat-treated samples and these are $1.2\~1.5$ times higher values than them of mother glass. This process can be applicable to the strengthening of thinner glass plate, and it has an advantage over traditional heat-treatment and ion-exchange method.