• 제목/요약/키워드: %24TiO_2%24

검색결과 371건 처리시간 0.029초

염료감응형 태양전지의 광전기적 특성 개선을 위한 금속산화물 나노파이버의 응용 (Application of Metal Oxide Nanofiber for Improving Photovoltaic Properties of Dye-Sensitized Solar Cells)

  • 동영상;김은미;정상문
    • 청정기술
    • /
    • 제24권3호
    • /
    • pp.249-254
    • /
    • 2018
  • 염료감응형 태양전지의 광전변환효율(${\eta}$) 향상을 위하여 수열합성한 $TiO_2$ 나노입자에 전기방사한 $TiO_2$, $SiO_2$, $ZrO_2$$SnO_2$ 나노파이버를 첨가하여 광전극에 적용하였다. $TiO_2$ 나노파이버를 첨가한 염료감응형 태양전지는 순수한 $TiO_2$ 나노입자에 비해 높은 전류밀도($J_{sc}$)를 나타내었고 이것은 나노파이버 구조로 인하여 염료에서 여기된 전지의 전달 특성이 용이하여 나타난 현상으로 생각된다. 또한 $SiO_2$ 나노파이버를 첨가한 염료감응형 태양전지의 경우, 순수한 $TiO_2$ 나노입자를 이용한 것에 비해 보다 높은 0.67 V의 개방전압($V_{oc}$)을 나타내었고 에너지 변환효율 또한 6.24%로 가장 높게 나타났다.

마우스 경구 및 경피투여에 의한 $TiO_2$ 나노입자의 체내분포 (Tissue Distribution of $TiO_2$ Nanoparticles in Mice after Oral Administration, and Skin Treatment)

  • 박은정;박광식
    • Environmental Analysis Health and Toxicology
    • /
    • 제23권1호
    • /
    • pp.63-65
    • /
    • 2008
  • The tissue distribution of $TiO_2$, nanopaprticles was investigated in mice after oral administration, and skin treatment. Male mice were treated with the dose of 5 g/kg of $TiO_2$ for three consecutive days and sacrificed at 24 hours after the last administration. As results, the orally administered $TiO_2$ nanoparticels were shown to be distributed in the testis, lung, and brain at 24 hours after the last treatment. Kidney does not seem to be the main target of $TiO_2$ nanoparticle distribution. It means that $TiO_2$ nanoparticles (17 nm) are easily absorbed through entero-gastric system and may cause toxicity in brain, lung, and reproductive organs. The distribution of skin treatment showed the same pattern like oral administration.

습식법에 의한 티탄산칼륨 섬유의 합성 (Synthesis of potassium titanate by wet process)

  • 강대갑;송종택
    • 한국결정성장학회지
    • /
    • 제5권3호
    • /
    • pp.278-283
    • /
    • 1995
  • 금속티타늄 분말과 $H_2O_2$와의 반응물에 KOH용액을 첨가하는 습식법에 의해 티탄산칼륨 섬유를 합성하고, 합성된 생성물을 XRD, SEM, FT-IR 등에 의해 검토하였다. 습식 합성법의 경우, $KOH/TiO_2$ 몰비, 합성시간, aging 시간등이 주로 최종 생성물에 영향을 주었다. $KOH/TiO_2 = 1/1$, 합성시간 24시간, aging 시간 24시간 및 하소 온도 $900^{\circ}C$에서의 생성물은 주로 potassium tetratitanate이었으며, 10 ~ 20mm의 가늘고 긴 장섬유이었다. 합성시간이 길어질수록, 그리고 KOH량이 적어질수록, potassium tetratitanate는 potassium hexatitanate로 바뀌면서 섬유의 길이는 짧아졌다.

  • PDF

Ti-6Al-4V 합금 표면에 생성된 $TiO_2$ 나노튜브의 전석회화 처리 (Precalcification Treatment of $TiO_2$ Nanotube on Ti-6Al-4V Alloy)

  • 김시정;박지만;배태성;박은진
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.39-45
    • /
    • 2009
  • 연구목적: 최근 치과용 임플란트의 임상 경향이 전체 치료기간을 줄일 수 있는 방법에 관심이 집중됨에 따라 불활성의 티타늄 임플란트 표면에 활성을 부여하기 위한 다양한 표면처리 방법이 검토되고 있다. 본 연구에서는 높은 강도가 요구되는 부위의 임플란트 재료로서 사용되고 있지만 표면 특성이 순 티타늄에 비해 떨어지는 Ti-6Al-4V 합금의 골전도성을 개선할 목적으로 시행되었다. 연구 재료 및 방법: $20{\times}10{\times}2\;mm$의 Ti-6Al-4V 합금판을 준비한 다음 $TiO_2$ 나노튜브를 형성하기 위해 DC 정전원 장치의 양극과 음극에 각각 시편과 백금판을 결선하고 0.5 M $Na_2SO_4$와 1.0 wt% NaF를 함유하는 전해액을 사용하여 전압 20 V와 전류밀도 $30\;㎃/cm^2$ 조건에서 2시간 동안 양극산화 처리하였다. $TiO_2$ 나노튜브 형성 후 산화 피막층의 결정화를 유도하기 위해 $600^{\circ}C$에서 2시간 동안 열처리하였고, 표면활성도를 개선하기 위해 0.5 M $Na_2HPO_4$ 수용액 24시간 침적과 $Ca(OH)_2$ 포화 수용액에 5시간 침적을 시행하였다. 준비한 시편의 표면 반응성을 조사하기 위해 pH와 무기이온의 농도를 사람의 혈장과 유사하게 조절한 Hanks 용액 (H2387, Sigma Chemical Co., USA)에 2주간 침적하였다. 결과: 20 V에서의 양극산화처리로 직경 48.0 - 65.0 ㎚ 범위의 무정형의 $TiO_2$ 나노튜브가 전체 표면에 걸쳐서 균일하게 생성되는 양상을 보였다. $TiO_2$ 나노튜브는 $600^{\circ}C$에서 2시간 열처리 후 상대적으로 강한 anatase 피크와 함께 rutile 피크가 관찰되었다. $TiO_2$ 나노튜브의 표면활성도는 0.5 M $Na_2HPO_4$ 수용액 24시간 침적과 $Ca(OH)_2$ 포화수용액에 5시간 침적으로 개선되었다. 열처리와 전석회화 처리 후 SBF에 침적한 결과, $TiO_2$ rutile 피크의 상대적 강도는 크게 증가되었지만 HA의 석출은 저하되는 경향을 보였다. 결론: 이상의 결과로 미루어 볼 때, 양극산화 처리한 $TiO_2$ 나노튜브는 $600^{\circ}C$에서의 열처리에 의해 피막층이 안정화되고, 0.5 M $Na_2HPO_4$ 수용액 24시간 침적과 $Ca(OH)_2$ 포화수용액에 5시간 침적으로 표면에 인산칼슘층을 형성하는 것이 표면활성도를 개선하는데 유효함을 알 수 있었다.

산소 결함형 $TiO_2$ 분말의 가시광에 대한 광촉매 활성 (Photocatalytic Activity of $TiO_2$ Powder with an Oxygen Deficiency in the Visible-Light Region)

  • 양천회
    • 한국응용과학기술학회지
    • /
    • 제24권1호
    • /
    • pp.1-9
    • /
    • 2007
  • It prepared the $TiO_2$ powder which has photo-catalytic activity in the visible-light by the wet process with titanium oxysulfate. The titanium $dioxide(TiO_2)$ by the wet process creates a new absorption band in the visible light region, and is expected to create photocatalytic activity in this region. Anatase $TiO_2$ powder which has photocatalytic activity in the visible light region, is treated using microwave and radio-frequency(RF) plasma. But, the $TiO_2$ powder for the visible light region, which also can be easily produced by wet process. The wet process $TiO_2$ absorbed visible light between 400nm and 600nm, and showed a high activity in this region, as measured by the oxidation removal of aceton from the gas phase. The AH-380 sample appears the yellow color to be strong, the catalytic activity in the visible ray was excellent in comparison with the plasma-treated $TiO_2$. The AH-380 $TiO_2$ powder, which can be easily produced on a large scale, is expected to have higher efficiency in utilizing solar energy than the plasma-treated $TiO_2$ powder.

$MnO_2$가 첨가될 PSS-PT-PZ 세라믹의 유전 및 초전특성에 관한 연구 (A Study on the Dielectric and Pyroelectric Properties of the PSS-PT-PZ Ceramics Added $MnO_2$)

  • 이성갑;류기원;이영희;배선기;박창엽
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.194-197
    • /
    • 1991
  • In this study, $(Pb_{0.99}La_{0.01})[(Sb_{1/2}Sn_{1/2})_{0.10}Ti_{0.25}Zr_{0.65}]O_3$, added $MnO_2$ (0-0.30[mol%]) ceramics were fabricated by the mixed oxide method. The sintering temperature and time were $1250[^{\circ}C]$, 2[hr], respectively. In the $(Pb_{0.99}La_{0.01})[(Sb_{1/2}Sn_{1/2})_{0.10}Ti_{0.25}Zr_{0.65}]O_3$ added $MnO_2$ (0.24[mol%]) specimens, relative dielectric constant and dielectric loss were minimum values 3.52, 0.003, respectively, and Curie temperature were highest values $256[^{\circ}C]$. Pyroelectric coefficient and voltage responsivity of the $(Pb_{0.99}La_{0.01})[(Sb_{1/2}Sn_{1/2})_{0.10}Ti_{0.25}Zr_{0.65}]O_3$, and added $MnO_2$ (0.24[mol%]) specimen were good values, $6.73{\times}10^{-8}[C/cm^2K],\;125[v/W]$, respectively. Figure of merit of pyroelectric current, voltage and detectivity of the specimen, $(Pb_{0.99}La_{0.01})[(Sb_{1/2}Sn_{1/2})_{0.10}Ti_{0.25}Zr_{0.65}]O_3$ added $MnO_2$ (0.24[mol%]) were good values $2.714{\times}10^{-8}[Ccm/J],\;7.706{\times}10^{-11}[Ccm/J],\;2.640{\times}10^{-8}[Ccm/J]$, respectively. Voltage responsivity of the $(Pb_{0.99}La_{0.01})[(Sb_{1/2}Sn_{1/2})_{0.10}Ti_{0.25}Zr_{0.65}]O_3$ added $MnO_2$ (0.24[mol%]) specimens were decreased with increasing the chopper frequency.

  • PDF

TiO$_2$가 첨가된 ZnO의 전기적성질 (Electrical Properties of TiO$_2$dopen ZnO)

  • 최우성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1995년도 추계학술대회 논문집
    • /
    • pp.22-24
    • /
    • 1995
  • The electrical conductivity of TiO$_2$doped ZnO was investigated by means of complex impedance measurement and voltage-current source and meaurement unit. The e1ectrical conductivity of TiO$_2$added ZnO was increased with increasing the concentration of TiO$_2$. The calculated relative dielectric constant was decreased with increasing the concentration of TiO$_2$. The increase of electrical conductivity seems to be the effect of TiO$_2$donor doping.

  • PDF