• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.31-44
• /
• 1999

Interfacial adhesive strength between the fully-crosslinked and partially-crosslinked rubber layers were Investigated at the temperature range of $30{\sim}120^{\circ}C$ for four different rubbers(NR, SBR, EPDM, BIMS). The surfaces of interfacial failure were also investigated using a scanning electron microscopy(SEM). The physical interlinking played a major role in the adhesive strength between the fully-crosslinked rubber layers. When a partially-crosslinked rubber layer was bonded to the fully-crosslinked one, the chemical as well as the physical interlinking affected the adhesive strength. NR showed a "interfacial knotty tearing" pattern, while EPDM showed a typical "cross-hatched" one when the adhesive strength approached to the cohesive tear strength of each material.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.299-306
• /
• 2003

It is well known that the interaction and adhesion between the glass fiber (GF) and polymer matrix has a significant effect in determining the properties of fiber-reinforced materials. Therefore, it is one of important considerations to modify the surface of glass fiber with an appropriate sizing. We investigated the treatment method of glass fiber with coupling agent to improve the interaction of the interfacial region. The correlation between interfacial property and interphase microstructure was also examined in an attempt to realize a proper morphology at the glass fiber surfaces.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.75-81
• /
• 2013

Epoxy matrix based composites were fabricated by adding SiC nano fillers. The interfacial properties of composites were varied with different shapes of SiC nano fillers. To investigate the shape effects on the interfacial properties, beta and whisker type SiC nano fillers were used for this evaluation. The dispersion states of nano SiC-epoxy nanocomposites were evaluated by capacitance measurements. FE-SEM was used to observe the fracture surface of different structures of SiC-epoxy nanocomposites and to investigate for reinforcement effect. Interfacial properties between carbon fiber and SiC-epoxy nanocomposites were also evaluated by ILSS (interlaminar shear strength) and IFSS (interfacial shear strength) tests. The interfacial adhesion of beta type nanocomposites was better than whisker type.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.395-398
• /
• 2006

동일한 조건에서 순수한 물과 계면활성제인 DBS(dodecyl bezebe sulfonic acid) 25ppm을 첨가한 물에 대해 천연가스 하이드레이트를 제조시 가스의 함유량은 각각 80배와 160배로 2배의 차이가 발생한다. 이에 대해 본 연구에서는 결정 생성 형태의 관찰 및 $^{13}C$ NMR을 사용한 분광학적 구조 분석으로부터 이의 원인을 찾고자 하였다. 순수한 물과 DBS를 미량 함유한 물을 사용하여 whiskery 결정을 생성시킨 결과, 순수한 물을 사용한 경우보다 섬유 다발 형태가 매우 활발한 형태의 결정 형태로 가스하이드 레이트가 생성됨을 알 수 있었다. 또한 400MHz의 NMR을 사용한 분광학적 구조 분석으로부터 천연가스하이드레이트는 구조-I과 구조-II가 혼재된 결정 구조를 이루고 있음을 알 수 있었다. 또한 DBS를 함유한 물에 의해 제조된 천연가스하이드레이트는 arge cage를 많이 생성시키는 역할을 하는 분석 결과를 보였고 이것이 가스 함유량을 증대시키는 원인 중의 하나임을 알 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.140-145
• /
• 2008

Silicon single crystals are grown by Czochralski (CZ) method in different growing conditions. The different shapes of the crystal-melt interface are obtained with various magnetic fields. Effects of zero-Gauss plane (ZGP) shape and magnetic intensity (MI) on the crystal-melt interface in the crystal experimentally are investigated. The shape of ZGP is not only flat but also parabolic, which is due to magnetic ratio (MR) of the lower to upper current densities in the configurations of the cusp-magnetic fields. As the MR increases, the crystal-melt interface becomes more concave. It means that the hot melt can be easily transported to the crystal-melt interface with increasing the MR. Effective shape of the crystal-melt interface is found to depend on the magnetic field in cusp-magnetic CZ method. The experimental results are compared with other studies and discussed.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.448-451
• /
• 2012

본 연구에서 matrix간의 계면 결합력을 불리하게 작용하는 Wax성분이나 Lignin, Hemi-Cellulose등의 제거를 위해 화학적 개질방법중인 NaOH, Acetic acid, Silane으로 처리하여 기질 고분자의 계면의 영향을 알아보고 SEM을 이용하여 형태학적 변화와 열적특성 변화를 관찰하였다. 형태학적 변화에서는 NaOH, Acetic acid 처리보다 Silane처리가 계면결합력이 증가하여 기계적 물성이 증가되었다는 것을 볼수 있었고, 열분석에서는 NaOH, Acetic acid, Silanec 처리가 유사하게 나타났지만, 복합재를 전처리하지 않은것보다 기질고분자와 천연섬유간의 계면 결합은 전처리하는 것이 결합에 있어서 좋다는 결과를 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.41-46
• /
• 1997

The change of flow field and the effects of convective heat transfer on the shape and location of melt/crystal interface has been studied during the crystal growth by the heat exchanger method. Although the thermal structure is stable in the crucible, the flow due to the natural convection driven by radial temperature gradient is significant, because the thermal stability is broken by the hemispherical melt/crystal interface shape. The maximum interface deflection with convection is smaller than without and the convective heat transfer should be considered to simulate the heat transfer process of heat exchanger method rigorously.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.65-73
• /
• 2000

Surfactants have been extensively considered for decontamination of the subsurface polluted with hydrophobic organic compounds. In order to investigate the effect of molecular structures on the solubilization of hydrophobic organic compounds, solubility enhancement of two PAHs in solutions of three different surfactants-conventional, dianionic, and gemini. The batch experimental results showed that the gemini was the most effective and the dianionic was the least, indicating that organic carbon content of the surfactants was the major factor which determines the sorption capacity of surfactant aggregates in water, unlike some of the previous reports.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.487-493
• /
• 2004

The distribution of particles, in the mixture of poly(ethyl acrylate-co-t-butyl acrylate) (PEB) emulsion polymer and silica nanoparticles, was determined mainly depending on the pH of the mixture. The weak interfacial interaction was responsible for the severe coagulation of silica particles and the irregular dispersion for these nanocomposites. Methacryloxypropyltrimethoxysilane (MPS) was used to modify both the polymer and the silica. The nanocomposites which were prepared with these modified components had finer dispersion of silica nanoparticles and core-shell morphology due to the strong interfacial interaction. The strong hydrogen bonds were identified for these nanocomposites with FT-IR. The nanocomposites having strong interfacial interaction showed the increased glass transition temperature, the decreased ΔC$_{p}$ , and the increased decomposition temperature of the polymer chains. polymer chains.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.29-30
• /
• 1995

산업폐수는 종종 희석용액 내에 많은 유독성 물질을 함유하고 있다. 산업폐수를 처리하는 분리공정으로 역삼투막과 한외여과와 같은 막분리 기술은 분리 공정이 간단하고 상변화없이 폐수용량을 크게 감소시킬 수 있고 에너지 소모가 작은 장점을 가지고 있어 그 적용이 확산되고 있다. 계면활성제의 흡착성을 이용한 한외여과 막분리는 높은 막투과속도와 계면활성제의 높은 선택성이 결합된 것인데, Sodium Dodecyl Sulfate(SDS)와 같은 계면활성제를 이용하여 폐수로부터 불용성 중금속 이온과 독성의 유기물질을 분리하는 데에 적용할 수 있다. 임계미셀농도(CMC) 이상에서의 농도에서, 60~200 계면활성제 분자들이 거대분자나 미셀을 형성하면서 서로 응집된다. 그러므로 음으로 하전된 미셀과 결합된 금속 음이온은 2,000에서 10,000 범위의 분자량을 가지는데 역삼투막(RO)보다 작은 압력에서 상당히 큰 막투과속도를 가진 한외여과막에 의해 선택적으로 제거될 수 있다 본 연구의 목적은 중공사 한외여과막의 막투과속도에 미치는 인자들의 영향과, 계면활성제의 흡착성을 이용한 중공사 한외여과 막분리계 성능에 미치는 금속의 형태, S/M 몰비등의 효과를 결정하는데 있다.