• Electronics and Telecommunications Trends
• /
• v.30 no.2
• /
• pp.115-124
• /
• 2015

본고는 2010년에 이어 두 번째로 대규모 멀티밴드 동시경매를 시행하려고 준비해온 독일의 경매 계획 추진과정과 정책동향에 대하여 분석 정리하였다. 본고의 독일 사례 분석결과에 따르면, 대규모 멀티밴드 동시경매는 장점이 많기 때문에 국내의 경우에도 특히 저대역(700MHz 포함)과 고대역 간 밴드 시너지를 높일 수 있는 멀티밴드 동시경매를 정책화하는 것이 효율적인 주파수 활용을 위해 타당할 것이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.69-75
• /
• 2004

In the paper, system is combined multiband system with DS-UWB techniques with properties including low peak-to-average power ratio, robustness to multiuser interference and excellent security. Because each sub-band is not satisfied with coherence bandwidth, rake receiver in each sub-band is applied to the Proposed system receiver. Output of rake receiver is combined by using Maximal Ratio combining technology. In this paper we mathematically analyse the BER of the DS-UWB system with singleband and multiband systems in the narrow interference channel condition and multi user interference channel condition, the simulation results show that proposed scheme is getting robuster with increasing of the number of subbands.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.201-209
• /
• 2011

This paper suggests a panorama image stitching system which consists of an image matching algorithm: modified SURF (Speeded Up Robust Feature) and an image blending algorithm: multi-band blending. In this paper, first, Modified SURF is described and SURF is compared with SIFT (Scale Invariant Feature Transform), which also gives the reason why modified SURF is chosen instead of SIFT. Then, multi-band blending is described, Lastly, the structure of a panorama image stitching system is suggested and evaluated by experiments, which includes stitching quality test and time cost experiment. According to the experiments, the proposed system can make the stitching seam invisible and get a perfect panorama for large image data, In addition, it is faster than the sift based stitching system.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.183-186
• /
• 2003

인터프레임 웨이블렛 부호화(Interframe Wavelet Coding)는 3D 서브밴드 부호화라고도 하며, 기존의 DCT 기반 동영상 부호화 방식에 비해 압축 효율이 우수하고, 특히 스케일러빌리티 기능이 뛰어난 부호화 방법이다. 본 논문에서는 기존의 인터프레임 웨이블렛 부호화 방법에서 시간 밴드 영상에 대해 동일한 웨이블렛 필터를 사용하여 공간 웨이블렛 필터를 적용하던 것을, 시간 밴드 영상의 특성을 고려하여 로우 밴드와 하이 밴드에 서로 다른 웨이블렛 필터를 적용하는 방법을 제안하였다. 본 논문에서는 로우밴드에는 9/7 필터를 적용하고 하이 밴드에는 Haar필터를 적용하여 보았다. 이렇게 적용함으로서 부호과정에서 가장 많은 연산량을 필요로하는 역 웨이블렛 변환이 간단하게 되어 복호기의 복잡도가 감소하는 효과가 있다. PSNR 실험에서 기존의 9/7 필터만을 사용하는 경우와 비교한 결과 거의 차이가 없었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.951-957
• /
• 2003

The analysis of RF performance requirement conditions on communication system is critical indicator to predict the performance of system. UWB(Ultra Wide Band) system which the standard is not established yet is difficult to derive the precise system performance requirement condition. Also, there are differences between conventional UWB system and multi-band system about RF performance requirement condition. In this thesis, the differences are analyzed and performance requirement conditions of multi-band UWB system are described on the basis of the differences. Throughput, maximum transmit power, and sensitivity of multi-band UWB system is varied with respect to the number of Sub-Bands. In addition, because of Multi-path effect, if PRF(Pulse Repetition Frequency) is changed, the Multi-path link margin is happened to compensate for Multi-path Energy Loss which is contributed by increasing of the Link Margin. According to Multi-path Margin, the variation of the resistance with respect to sensitivity and interference signal is observed and analyzed through the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.401-407
• /
• 2009

The multi-band (MB) ultra-wideband (UWB) communication system divides its available frequency spectrum in 3.1 to 10.6GHz into 16 sub-bands, which leads to inherent disparities between carrier frequencies of each sub-band. For instance, the highest carrier frequency is 2.65 times higher than the lowest one. Since the propagation loss is proportional to the square of the transmission frequency, the propagation loss on the sub-band having the highest carrier frequency is approximately 7 times larger than that on the sub-band having the lowest carrier frequency, which results in disparities between received signal powers on each sub-band. In this paper, we propose a novel correlation scheme for frequency hopping (FH) MB UWB communications, where the correlation time is adaptively adjusted relative to the sub-band, which reduces the disparity between the received signal energies on each sub-band. Such compensation for lower received powers on sub-bands having higher carrier frequency leads to an improvement on the total average bit error rate (BER) of the entire FH MB UWB communication system. We analyze the performance of the proposed correlation scheme in Nakagami fading channels, and it is shown that the performance gain provided by the proposed correlator is more significant as the Nakagami fading index n increases (i.e., better channel conditions).

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.91-97
• /
• 2012

This paper first proposes the speech recognition algorithm by detection of the speech and noise sections at each frame, then proposes the reduction algorithm of environmental noise by multi-band filter which removes the background noises at each frame according to detection of the speech and noise sections. The proposed algorithm reduces the background noises using filter bank sub-band domain after extracting the features from the speech data. In this experiment, experimental results of the proposed noise reduction algorithm by the multi-band filter demonstrate using the speech and noise data, at each frame. Based on measuring the spectral distortion, experiments confirm that the proposed algorithm is effective for the speech by corrupted the noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.1-8
• /
• 2007

In this paper, we have derived the Noise-Equation to determine the level of cross-modulation noise that is required for designing multi-band CDMA handset from IS-98 standard. From this Noise-Equation, also we were able to determine each component's specification and forecast the performance(or margin) of designing handset. In conclusion, we have designed and implemented the multi-band CDMA handset of Qualcomm's Zero-IF structure and verified validity of the Noise-Equation. In result, we have got the result of ${\pm}0.5dB$ error between Noise-Equation and actual measurement. Therefore, this paper will give a guideline for design of the Multi-Band CDMA handset.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.226-230
• /
• 2012

본 논문에서는 직선 허프변환을 이용하여 DNA밴드 영상의 위치를 자동으로 인식한 다음, 영상의 기울어짐을 검출하고 보정하는 방법을 제안한다. 먼저 입력된 그레이 스케일 DNA밴드 영상을 이진화한 후 직선 허프변환에 의하여 DNA밴드 영상에 포함되어 있는 직선성분을 추출하고, 직선성분들이 직교하는 점을 찾아내어 입력하고자 하는 영상의 위치를 인식한다. 그리고 많은 양의 DNA밴드 영상 데이터를 효과적으로 입력할 수 있도록, 위치인식과정에서 실시한 직선 허프변환에 의해 영상의 기울어짐을 ${\pm}1$도 이내의 정확도로 검출하고, 기울어짐을 자동으로 보정한다.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.621-629
• /
• 2016

This paper suggests a new structure of hybrid DRC to enhance the psychoacoustic sound quality of a conventional multiband DRC. The proposed hybrid DRC consists of two serially cascaded stages. The front stage DRC is multiband, and it compresses input based on RMS level detection, whereas, the back stage DRC is single band, and it regulates input according to peak level detection. The proposed hybrid DRC shows better loudness while suppressing distortion by clipping. The proposed algorithm was verified through MATLAB simulation, and it was implemented using an FPGA board for listening test. The test result showed that the proposed hybrid structure enhances overall psychoacoustic sound quality compared to conventional structures, which is based on only RMS or peak level detection.