• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.472-473
• /
• 2008

최근 전력 공급의 안정성을 위해 송전선로에 각종 센서를 볼형태(볼센서)로 장착하여 철탑 및 송전선의 위험 상태를 실시간으로 모니터링해야 하는 필요성이 증대되고 있는데, 본 연구에서는 볼센서의 장착 특성으로 인해 구 표면에 3차원 풍향풍속센서 1개로 3차원 풍향풍 속이 측정 불가능한 문제점을 해결하고자, 2개의 2차원 풍향풍속센서의 측정 데이터를 이용하여 3차원 풍향풍속을 산출하는 방안에 대해 기술하였다. 구 표면을 따르는 풍속 및 풍압 유동해석 결과를 바탕으로, 먼저 구 표면을 따르는 2개의 풍향벡터를 통해 실제 풍향을 산출하고, 실제 풍향에 상대적인 센서 위치에 따른 해석결과에 기준해 보정처리를 함으로써 실제 풍속을 산출하는 방안에 대한 연구를 수행하였다.

• Satellite Communications and Space Industry
• /
• v.5 no.2.3
• /
• pp.66-71
• /
• 1997

21세기의 문턱에 선 지금 세계 질서는 경제우선주의와 기술패권주의 속에서 국경 없는 무한경쟁시대로 급속히 재편되고 있으며, 정보화 또한 급속히 진전되고 있다. 이에 미국, EU 등 선진국은 정보통신분야의 기술적 우위를 바탕으로 기술개발을 강화하는 한편 다른 나라의 통신서비스 및 장비시장의 개방을 강력히 요구하고 있다. 선진국들의 강한 견제가 지속되고 있는 가운데 우리 경제는 불황이라는 커다란 어려움에 처해 있는 동시에 국내 정보통신시장은 내년을 기점으로 하여 완전히 개방하게 되어 대다수의 기업들이 커다란 혼란을 경험할 수 밖에 없을 것이다. 이처럼 커다란 위험에 처해 있는 우리경제가 이제부터 나아가야 할 방향은 어디인가? 현재의 상황을 타개하기 위한 방안을 다각도로 모색하여 보면 정보화와 정보산업분야에 관심을 갖지 않을 수 없다. 이러한 환경변화속에 우리 정부의 역할과 책임 또한 커져가고 있는 지금 정부의 정책시안과 동향에 대한 이해를 넓히고자 정보통신부 박성득 차관과 대담의 자리를 마련했다. 미래 정보화 사회에 대하여 힘주어 말씀하시는 열정과 모습에서 우리의 밝은 내일을 기대할 수 있었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.83-90
• /
• 2015

The car ferry operating between the mainland and the island plays an important role on transportation of goods and passengers. Therefore, the improvement of efficiency and safety as well as economic factor are importantly considered in the development process of car ferry. Double-ended car ferry is already popularized because of its economic feasibility and convenience for passenger in Europe and developed countries, and the demand is booming in domestic. In this paper, dynamic characteristics of propeller shaft and strength in double-ended car ferry are analyzed using campbell diagram and modal analysis. Based on the analysis of dynamic characteristics, resonant phenomenon and critical speed are stable when occurring the propeller shaft vibration due to forward and reverse propeller shaft working.

• Journal of Drive and Control
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2017

The power train of a concrete truck mixer reducer includes differential planetary gears to get a large reduction ratio for operating the mixer drum in a compact structure. These differential planetary gears are a very important part of the mixer reducer where strength problems are the main concern. Gear bending stress, gear compressive stress and scoring failure are the main concerns. Many failures in differential planetary gears are due to the insufficient gear strength and resonance problems caused by major excitation forces such as gear mating failure in the transmission. In the present study, where the excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate differential planetary gear critical speeds. Mode shapes and natural frequencies of the differential planetary gears are calculated by CATIA V5. These are used to predict gear resonance failures by comparing the working speed range with the critical speeds due to the gear transmission errors of the differential planetary gears.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.71-78
• /
• 2017

The power train of hydro-mechanical continuously variable transmission (HMCVT) for 8-ton class forklift includes hydro-static units, hydraulic multi-wet disc brake & clutches and complex helical & planetary gears. The helical & planetary gears are key components of HMCVT's power train wherein strength problems are the main concerns including gear bending stress, gear compressive stress, and scoring failure. Many failures in power train gears of HMCVT are due to the insufficient gear strength and resonance problems caused by major excitation forces, such as gear transmission error of mating gear fair in the transmission. In this study, wherein excitation frequencies are the gear tooth passing frequencies of the mating gears, a Campbell diagram is used to calculate the power train gears' critical speeds. Mode shapes and natural frequencies of the power train gears are calculated by CATIA V5. These are used to predict resonance failures by comparing the actual working speed range with the critical speeds due to the gear transmission errors of HMCVT's power train gears.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.53-61
• /
• 2022

Accidents are steadily occurring due to machine defects and carelessness during LNG storage operations. In previous studies, an environmental sensor module capable of measuring pressure, temperature, gas concentration, and flow to detect danger in advance was developed and the response speed according to the amount of leaked gas was measured. This paper proposes the development of a wired and wireless communication module that transmits data measured by the environmental sensor module to embedded devices connected to wired and wireless networks of SPI, UART, and LTE. First, a data communication module capable of interworking with an environmental sensor is designed. Design a protocol between devices in the Local Control Part and wired and wireless protocols in the Local Control Part and Remote Control Part. Ethernet, WiFi, and LTE communication modules were designed, and UART and SPI channels that can be linked with embedded controllers were designed. As a result, it was confirmed through a UI (User Interface) that each embedded device transmits data measured by the environmental sensor module while simultaneously communicating on a wired and wireless basis.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.534-539
• /
• 2008

This paper is about intelligent hexapod robot for the support walking of the aged person. The robot using various sensors and small camera has various abilities of forward backward walking, turing left or right, control the speed of walking, avoiding the obstacles and detecting risky situation of fire or gas. To let the aged feel soft and safe walking, we used special servo motor and developed hexapod walking mechanism and effective algorithm.

• Tribology and Lubricants
• /
• v.28 no.6
• /
• pp.265-271
• /
• 2012

In the preceding Part I study, for improving the unbalance response vibration of a large PRT motor-generator rotor fundamentally by design, a series of design analyses were carried out for bearing improvement by retrofitting from original plain partial journal bearings, applied for operation at a rated speed of 1,800 rpm, to final tilting pad journal bearings. To satisfy evenly key basic lubrication performances such as the minimum lift-off speed and maximum oil-film temperature, a design solution of 5-pad tilting pad journal bearings and maximizing the direct stiffness by about two times has been achieved. In this Part II study, a detailed rotordynamic analysis of the large PRT motor-generator rotor-bearing system will be performed, applying both the original plain partial journal bearings and the retrofitted tilting pad journal bearings, to confirm the effect of rotordynamic vibration improvement after retrofitting. The results show that the rotor unbalance response vibrations with the tilting pad journal bearings are greatly reduced by as much as about one ninth of those with the plain partial journal bearings. In addition, for the tilting pad journal bearings there exist no critical speed up to the rated speed and just one instance of a concerned critical speed around the rated speed, whereas for the plain partial journal bearings there exist one instance of a critical speed up to the rated speed and two instances of concerned critical speeds around the rated speed.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.69-74
• /
• 2011

This paper deals with the detail rotordynamic analysis for the vertical rotor system as development of vertical sea water lift pump for FPSO deep well. In a vertical rotor system, since linearized stiffness and damping coefficients of fluid film bearing are no longer be valid, hence the transient response analysis considering a fluid film force for every journal position in the bearing needs to be required. In this study, the transient response analysis of the proposed vertical pump rotor system was carried out in dry-run and wet-run conditions, respectively. The results show that orbital vibration responses of the rotor system remain stable at rated speed and thereby operating reliability of the vertical rotor system is confirmed. To overcome complexity of calculation pr ocedure and time consuming calculation of transient analysis, the calculating technique of steady-state response analysis is also proposed. The results of steady-state response obtained by applying the proposed technique to the rotor system are good agreement with the reference results, that is, transient responses.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.159-165
• /
• 1998

Bearing design of turbo type geared centrifugal air compressor for low vibration level has been studied. The Transfer Matrix Method was used in this paper to analyze the air-compressor consisting of impellers, multi-stage geared rotors, and oil-film hearings. We have to consider this air-compressor as multi-geared rotating system, because characteristics of rotor-bearing system are different from conventional characteristics of non-rotating system. From the view point of Rotordynamics, the stiffness and damping coefficient of oil-film bearing in case of compressor system are more sensitive than other design parameters such as shaft length, shaft diameter and the weight of impellers, etc. Therefore, the stiffness and damping coefficients on each bearing were considered as design parameters. As the result of this study, turbo type air compressor with low vibration level can be achieved.