• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.38-47
• /
• 2016

Objectives: The objective of this study was to determine the exposure levels of forklift operators to diesel engine exhaust(DEE) using black carbon(BC), elemental carbon(EC), and nitrogen dioxide($NO_2$) as indicators. Methods: A total of eight forklift operators in six collection companies were assessed over a period of two months from July to September 2015. BC was measured using a real-time monitor and respirable EC samples were analyzed using the NIOSH method 5040. $NO_2$ samples were collected using a passive badge-type sampler. Results: The geometric mean of BC, EC and $NO_2$ were $3.1-19.1{\mu}g/m^3$, $2.1-23.8{\mu}g/m^3$, and 12.5-166.6 ppb at all companies. When forklifts were operating both outside and inside, BC concentrations increased 2.0-5.6 times. The highest increase was observed when forklifts were operating indoors. The increase in BC concentrations varied by company(company A: 2.0 times, B: 3.2 times, C: 5.6 times, D: 2.1 times, E: 5.1 times, F: 2.6 times). The geometric mean of BC, EC, and $NO_2$ for the forklift operators was $9.6{\mu}g/m^3$, $7.9{\mu}g/m^3$, and 48.9 ppb, respectively. The geometric mean of BC, EC, and $NO_2$ for manufacturing workers was $9.3{\mu}g/m^3$, $0.9{\mu}g/m^3$, and 85.2 ppb, respectively. The mean BC and EC exposure levels for the forklift operators were slightly higher than those for manufacturing workers, but $NO_2$ levels for manufacturing workers were higher than those for the forklift operators(p>0.05). Multiple regression analysis revealed that diesel exhaust emissions standard, forklift weight and forklift manufacturer were the most influential factors in determining worker exposure. Conclusions: In the DEE work environment, workers who perform tasks within the workplace as well as inside forklifts as operators are likely to be exposed to a lack of ventilation. Further study of forklift operators' exposure to DEE indicators should be conducted to include a wider range of occupational and environmental situations, such as collection procedures, seasonal situations, types of fuel used, and number of forklifts.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.202-208
• /
• 1997

Bi-layered SrBi2Ta2O9(SBT) films were deposited on Pt/Ti/SiO2/Si sibstrates by rf magnetron sputt-ering at room temperature and then were annealed at 75$0^{\circ}C$, 80$0^{\circ}C$ and 85$0^{\circ}C$ for 1 hour in oxygen at-mosphere. The film composition of SrBi2Ta2O9 was obtained after depositing at room temperature and annealing at 80$0^{\circ}C$. Excess 20mole% Bi2O3 and 30 mole% SrCO3 were added to the target to compensate for the lack of Bi and Sr in SBT film. 200 nm thick SBT film exhibited and dense microstructure, adielectric constant of 210, and a dissipation factor of 0.05 at 1 MHz frequency. The films exhibited Curie temperature of 32$0^{\circ}C$ and a dielectric constant of 314 at that temperature under 100 kHz frequency. The remanent polarization(2Pr) and the coercive field(2Ec) of the SBT films were 9.1 $\mu$C/$\textrm{cm}^2$ and 85 kV/cm at an applied voltage of 3V, resspectively and the SBT film showed a fatigue-free characteristics up to 1010 cy-cles under 5V bipolar pulse. The leakage current density of the SBT film was about 7$\times$10-7A/$\textrm{cm}^2$ at 150 kV/cm. Fatigue-free SBT films prepared by rf magnetron sputtering can be suitable for application to non-volatile memory device.

• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.718-724
• /
• 2018

In this study, the $Ni_{0.9}Co_{0.05}Ti_{0.05}(OH)_2$ precursor was prepared by the concentration gradient co-precipitation method. In order to overcome the structural change due to oxygen desorption in the cathode active material with high nickel content, the physical and electrochemical analysis of the cathode active material according to the calcination temperature were investigated. Physical properties of $Li_{1.05}Ni_{0.9}Co_{0.05}Ti_{0.05}O_2$ were analyzed by FE-SEM, XRD and TGA. The electrochemical performance of the coin cell using a cathode active material and $LiPF_6$(EC:EMC=1:2 vol%) electrolyte was evaluated by the initial charge/discharge efficiency, cycle retention, and rate capabilities. As a result, the initial capacity and initial efficiency of cathode materials were excellent with 244.5~247.9 mAh/g and 84.2~85.8% at the calcination temperature range of $750{\sim}760^{\circ}C$. Also, the capacity retention exhibited high stability of 97.8~99.1% after 50cycles.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.102-110
• /
• 1988

This study was designed to find out whether the water quality of Lake Daeho would be suitable for Sgricultural purposes during 1984-1988 perird. Thr results were as follows ; 1. There was an apparent seasonal temperature fluctuation$(6-25^{\circ}C)$ above the entrance of the culvert at the depth of 14m, but the temperature below remained constant at $11,9^{\circ}C$. 2. The yearly water qualities observed at the deepest site by the seadike were 7.4-7.5 pH, 16,800-1,472 ${\mu}mhos/cm$ EC, 9.2-10.8ppm DO, 1.3-2.5ppm DOD, 2.4-5.3ppm COD, 0.22-2.29ppm T-N, 0.01-0.10ppm T-P. 3. The average values of water qualities at the epilimnion in 1988 were 7.6 pH, 1,745umhos/cm EC, 10.8ppm DO, 1.8ppm DOD, 2.4ppm COD, 0.52ppm T-N, 0.05ppm T-P. 4. The salinity of the epilimnion at a 6m depth was 29,000ppm before the final closure of the seadike. It was 11,000 ppm in March 1984, 4,300ppm in March 1985, 2,000ppm in March 1986 and 1987, and 900ppm in March 1988. The salinity of the whole water column decreased from 29.000ppm to 1,200 ppm in March 1988. The average salinity above and below the culvert in 1987 was about 1,300ppm, and 30,000ppm respectively reaching that of seawater. 5. The highest salinity was observed at the epilimnion by the seadike, showing about 5,835ppm in 1984. 6. The seasonal salinity fluctuation was 2,000ppm in May, 800ppm in October, and 485ppm in September 1987. 7. The halocline was observed at the depth of 14m where the entrance of the culvert was located. Therefore, the epilimnion water is suitable for agricultural purposes, and the intake of water from Lake Sapkyo seems to be unnecessary.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.1
• /
• pp.74-85
• /
• 1995

A study was conducted to provide some basic data for controlling the Mulberry scale insect(Pseudaulacaspis pentagona T.). Experiments were carried out with checking their field-life, and a few selected insecticides were tested when mulberry leaves were not in use. About 57% of female were survived from the overwintering attached to the bark. Over 80% of the scale were distributed within the range of 30cm from the base of each stem. One hundred percent and 96.7% of eggs were hatched under 25$^{\circ}C$ and 27$^{\circ}C$ respectively. Eighty percent of pupae emerged both under 25 and 27$^{\circ}C$. The Mulberry scale require about 33 days under 25$^{\circ}C$ and 30 days under 27$^{\circ}C$. This species had 2 generations each year in mulberry field in Suwon. Overwintered as a mated female only. Oviposited about 170 eggs under their scale starting from the late April (in 1994) through the mid May (in 1993). Phenthoate EC sprayed in the mid June against the larvae was very effect with over 96% of control value.

• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.85-91
• /
• 1991

.betha.-1,4-D-Glucan glucanohydrolase(EC 3.2.1.4;F-II-IV) purified from Trichoderma koningii was identified as a glycoprotein containing 9% carbohydrate. Isoelectric point of the enzyme was estimated to be 4.9 and molecular weight was determined to be approximately 58,000. The porducts of p-nitrophenyl-cellobioside ($PNPG_{2}$) catalyzed by the enzyme were p-nitrophenol(PNP) and p-nitrophenyl-glucoside($PNPG_{1}$). The Km value for $PNPG_{2}$ was estimated to be 0.97 mM in case of the holoside lindage and 10.4 mM in case of the aglycon linkage and their kcat values were $1.8*10^{5}$$ min^{-1}$ and $7.5*10^{5}$ $min^{-1}$ respectively. The product of p-nitrophenyl cellotriose($PNPG_{3}$) was only $PNPG_{1}$. The Km value for $PNPG_{3}$ was 69.5 .$\mu$M and kcat was $1*10^{8}$ $min^{-1}$ which implicates that the enzyme have higher affinity and higher hydrolysis rate toward $PNPG_{3}$ than toward $PNPG_{2}$. The enzyme showed its optimal activity at pH 4.0-4.5 and at 60.deg.C. The effect of gluconolactone on the activity toward $PNPG_{2}$ showed competitive inhibition pattern but glucose and cellobiose did not. The enzyme contained a high content of acidic and hydroxylated amino acids in contrast to basic amino acids.

• Journal of agriculture & life science
• /
• v.46 no.4
• /
• pp.9-20
• /
• 2012

Eugenol is a volatile compound synthesized by eugenol synthase in various plants and belongs to phenylpropene compounds. However, characteristics of eugenol synthase in tomato has not been known. Therefore, we cloned a full length cDNA of a putative eugenol synthase from tomato 'Micro-Tom' using rapid amplification of cDNA ends (RACE) technique and named a clone SlEGS. Open reading frame of SlEGS was 921bp long and its deduced amino acid sequence was 307bp. The BLAST analysis indicated that SlEGS shared high similarity with PhEGS1 (67.1%) and CbEGS2 (69.4%). Amino acid composition of SlEGS was determined by CLC genomics workbench tool and 3D structure of SlEGS was constructed by homology modeling using Swiss-PDB viewer and validated using PROCHECK and ProSA-web tool. In addition, the physiochemical properties of SlEGS was evaluated using ExPASy's ProtParam tool. Molecular weight was 33.93kDa and isoelectric point was 5.85 showing acidic nature. Other properties such as extinction coefficient, instability index, aliphatic index, and grand average hydropathy was also analyzed.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.341-350
• /
• 1997

The objective of this study is to investigate the structural behavior of the composite slabs with the new metal deckplate. The new deckplate can be used as structural member with topping concrete. So several experiments of this structural test and the fire resistance test were done. From this experiments. slabs with new metal deckpklate were verified as composite slabs. In this paper, this verifications were compared with the international design methods. For experiment. 49 specimens were made. the main parameters are deckplate thickness (1.2mm. 1.6mm) depth of topping concrete(85mm. 90mm). support condition(simple, 2-span), shear reinforcment(studs), span(2.7m, 3.0m, 3.3m. 3.6m. 3.9m) and shear span(L/3, L/4, L/7). We analyzed the structural behavior of composite slab throughout the moment-curvature relationship which is obtained with the program using the computer language. Turbo C. From this development for slab system, the reinforced concrete or steel structure building may be easy, economical for construction, And informations about the structural behavior of composite slabs will be utilized to established korea standard.