• 제목/요약/키워드: 13A Gas Appliance

검색결과 3건 처리시간 0.015초

13A 가스기기 새 가스호환성 판정법 (New Method for Estimating Gas Interchangeability for 13A Gas Appliances)

  • 하영철;박세종;박원식;최경석;이창언
    • 대한기계학회논문집B
    • /
    • 제35권9호
    • /
    • pp.961-967
    • /
    • 2011
  • 본 연구에서는 13A 가스기기의 새 가스호환성 판정법을 개발하고자 하였다. 호환성 판정법 개발의 원칙은 세 가지로서, 1) 웨버지수 외에 가스조성 영향을 대표할 수 있는 인자의 도출, 2) 우리나라 가정과 업소에 보급된 모든 종류의 제작사별 가스기기(예혼합 가스기기 포함) 시험, 3) 가능한 한 간단한 판정법 개발이다. 이러한 원칙하에 30대의 대표성 있는 가스기기에 대하여 가스호환성 실험을 하였고 그 결과 웨버지수-비중 형식의 간단한 2차원 판정법(도표)을 개발하였다. 본 호환성 판정법은, 기존 호환성 판정법과 달리 화염안정 영역이 좁은 예혼합 가스기기를 포함하며, 이로 인해 기존 호환성 판정법보다 가스호환성 영역이 좁은 것으로 나타났다.

새 가스그룹의 가스기기 시험가스 (Test Gases for Gas Burning Appliances of New Gas Group)

  • 하영철;김성민;이창언;최경석
    • 대한기계학회논문집B
    • /
    • 제35권4호
    • /
    • pp.439-444
    • /
    • 2011
  • 새 가스그룹의 가스기기 호환성 시험가스 결정을 위해 현 13A 가스그룹의 시험가스와 13A 가스기기의 가스호환성(효율 포함) 관계를 실험적으로 규명하였다. 이 시험결과로부터 새 가스그룹의 불완전 연소 및 화염 부상 한계 가스는 각각 새 가스그룹의 웨버지수 상한보다 2 % 크고, 하한 보다는 1 % 작은 값이 적정함을 알 수 있었다. 또한 효율 시험용 R 가스의 조성은 메탄 96 mol %와 프로판 4 mol %가 가장 적정하며, 일반 효율 시험시에는 공급 천연가스도 R가스로 사용될 수 있음을 확인하였다. 그리고 역화 한계 가스 내 수소 농도는 기존 30 vol %에서 EN437과 같이 23 vol %로 낮출 수 있는 것으로 분석되었다.

대체냉매 공기조화기용 로터리 압축기의 성능향상을 위한 최적 토출계에 관한 실험적 연구 (An Experimental Study on the High Performance Optimal Discharge System of a Rotary Compressor for an Air Conditioner using alternative Refrigerant R410a)

  • 윤영;정진택;민만기
    • 설비공학논문집
    • /
    • 제13권2호
    • /
    • pp.96-105
    • /
    • 2001
  • R410a which is one of HFC refrigerants is being considered to be a promising replacement for R22 widely used in domestic air conditioners. The rolling piston type rotary compressors for R410a have lower energy efficiency than those for R22 because of the high pressure difference between a suction chamber and a discharge chamber in the compression mechanism. in addition, the re-expansion gas loss of the rotary compressor for R410a which occurs a ta clearance volume in a discharge port becomes larger than that for R22 due to high density of R410a refrigerant. Therefore, Pressure-Volume analyses for various design parameters of a discharge system were carried out to improve efficiency of a R410a rotary compressor. The results such as performance dta, over-compression loss, and re-expansion loss were acquired by P-V analyses and analyzed quantitatively. As a conclusion, the optimal specifications of several design parameters of a discharge system were obtained by analyzing P-V diagrams.

  • PDF